Migration of l-Selenomethionine in the Water-Soil Interface Dominated by Iron Oxides.

Organic selenium (Se) accounts for up to 10-80% of total Se in soils, and l-selenomethionine (SeMet) is a typical organic Se species. However, the migration of SeMet in soils remains elusive. This study investigated the solid-liquid distribution, adsorption, desorption by phosphate, and self-oxidization of SeMet in solution under the influence of ferrihydrite, goethite, and hematite through batch experiments. Iron oxides could adsorb a much larger amount of SeMet than inorganic Se. At the initial Se element concentrations of 0-200 mg/L, the solid/liquid partition coefficient of SeMet was constant, which was 0.41, 0.43, and 0.50 on ferrihydrite, goethite, and hematite, respectively. In addition, the adsorption process of SeMet on the three iron oxides could be well described by the linear driving force model. Accordingly, the intraparticle diffusion coefficient of SeMet in ferrihydrite, goethite, and hematite was 1.4 × 103, 7.9 × 104, and 1.2 × 105 nm2/min, respectively. The adsorption of SeMet on the three iron oxides was slightly influenced by the pH and the coexisting ions, such as Cl-, NO3-, SO42-, and H2PO4-. The desorption ratio of SeMet on the three iron oxides by phosphate was lower than 2.5%. SeMet would aggregate the nanoparticles of iron oxides, resulting in a synergistic effect on the adsorption of phosphate. The oxidization ratio of SeMet was 23.9% in the solution, while it decreased to 17.1-17.5% in iron oxide suspensions. For this oxidization process, the three iron oxides exhibited varying effects to decelerate SeMet oxidation, as represented by the equivalent reaction. The findings of this study reveal the migration of SeMet in the water-soil interface under the influence of iron oxides, which can improve the understanding of Se cycling in the environment as well as provide some guidance for the better utilization of Se in soils and environmental remediation of Se pollution.

Halogen-Free Functional Quaternary Ammonium-Based Ionic Liquid as an Ecofriendly Corrosion Inhibitor for Q235 Steel in Acids.

A halogen-free quaternary ammonium-based ionic liquid functionalized with benzotriazole, BTA-16-BTA, was synthesized. Its anticorrosion effects on Q235 steel were evaluated in two different acids (6 M HCl or 1 M H3PO4) by weight loss and electrochemical tests. BTA-16-BTA shows the best performance at 30 °C with the highest inhibition efficiencies of 98.84% in 6 M HCl and 96.40% in 1 M H3PO4. The adsorption behavior of BTA-16-BTA molecules on Q235 steel in HCl solution obeys the Langmuir isotherm with an adsorption energy of about -40 kJ·mol-1, which implies chemisorption. Quantum chemistry calculation indicates that the chemical adsorption originated from the injection of π-electrons from inhibitor molecules into empty 3d orbitals of Fe atoms. The tight adsorption of inhibitor molecules and associated dehydration of the steel surface promoted the corrosion inhibition in HCl solutions. In H3PO4 solutions, passivation by phosphate anions and adsorption of inhibitor molecules contributed synergistically to the excellent anticorrosion performance.

Celastrol attenuates streptozotocin-induced diabetic cardiomyopathy in mice by inhibiting the ACE / Ang II / AGTR1 signaling pathway.

BACKGROUND: Heart failure is closely correlated with diabetic cardiomyopathy (DCM) and can lead to mortality. Celastrol has long been utilized for the treatment of immune and inflammatory disorders. However, whether celastrol would exert protective effects on DCM has not been determined. This work aimed to explore the protective actions of celastrol on DCM and unravel the underlying mechanisms involved. METHODS: A DCM model was constructed in mice by intraperitoneal administration of streptozotocin. ELISA and echocardiography were performed to examine myocardial injury markers and cardiac function, respectively. Morphological changes and fibrosis were assessed using H&E staining and Masson's staining. Inflammatory cytokines and fibrotic markers were detected by ELISA and RT-PCR. Endothelial nitric oxide synthase, apoptosis, and reactive oxygen species were detected by microscopic staining. Network pharmacology approaches, molecular docking analysis, ELISA, and Western blot were used for mechanism studies. RESULTS: Celastrol alleviated diabetes-induced cardiac injury and remodeling. Celastrol also suppressed diabetes-induced production of inflammatory cytokines and reactive oxygen species, as well as cardiomyocyte apoptosis. The cardioprotective effects of celastrol were associated with its inhibition on the angiotensin-converting enzyme / angiotensin II / angiotensin II receptor type 1 signaling pathway. CONCLUSION: Celastrol exhibits significant potential as an effective cardioprotective drug for DCM treatment. The underlying mechanisms can be attributed to the blockage of celastrol on the angiotensin-converting enzyme signaling pathway.

Triptolide attenuates irritable bowel syndrome via inhibiting ODC1.

BACKGROUND: Irritable bowel syndrome (IBS) is a chronic disorder of the gut-brain axis with significant morbidity. Triptolide, an active compound extracted from Tripterygium wilfordii Hook F (TwHF), has been widely used as a major medicinal herb in the treatment of inflammatory disease. METHODS: The chronic-acute combined stress (CAS) stimulation was used to establish IBS rat model. The model rats were then gavaged with triptolide. Forced swimming, marble-burying, fecal weight and abdominal withdrawal reflex (AWR) score were recorded. Pathologic changes in the ileal and colonic tissues were validated by hematoxylin and eosin staining. The inflammatory cytokines and Ornithine Decarboxylase-1 (ODC1) in the ileal and colonic tissues were performed by ELISA and WB. RESULTS: Triptolide didn't have antidepressant- and antianxiety- effects in rats caused by CAS, but decreased fecal weight and AWR score. In addition, Triptolide reduced the release of IL-1, IL-6, and TNF-α and the expression of ODC1 in the ileum and colon. CONCLUSION: The therapeutic efficacy of triptolide for IBS induced by CAS was revealed in this study, which may be related to the reduction of ODC1.

Carbon Electrode with Sputtered Au Coating for Efficient and Stable Perovskite Solar Cells.

Halide perovskite solar cells (PSCs) represent a low-cost and high-efficiency solar technology. However, most of the highly efficient PSCs need a noble electrode, such as Au, through thermal evaporation. It is reported that a sputtered Au electrode on a PSC could damage the organic hole transport layer (HTL) and the perovskite layer. Here, we report a simple, yet effective sputtered gold nanoparticle decorated carbon electrode to fabricate efficient and stable planar PSCs. The sputtered Au layer on the doctor-bladed coated carbon electrode can be directly applied to the perovskite semicells by mechanical stacking. By optimizing the gold thickness, a power conversion efficiency (PCE) of 16.87% was obtained for the composite electrode-based PSC, while the reference device recorded a PCE of 12.38%. The composite electrode-based device demonstrated 96% performance retention after being stored under humid conditions (50-60%) without encapsulation for ∼100 h. This demonstrates a promising pathway toward the commercialization of large-scale manufacturable sputtered electrodes for the PSC solar module.

Galectin-3 Inhibition Ameliorates Streptozotocin-Induced Diabetic Cardiomyopathy in Mice.

Objective: Diabetic cardiomyopathy (DCM), characterized by cardiomyopathy with the absence of coronary artery disease, hypertension, and valvular heart disease in patients with diabetes, significantly increases the risk of heart failure. Galectin-3 (Gal-3) has been shown to regulate cardiac inflammation and fibrosis, but its role in DCM remains unclear. This study aimed to determine whether Gal-3 inhibition attenuates DCM and NF-κB p65 activation. Methods: Diabetic cardiomyopathy (DCM) was established by intraperitoneal (IP) injection of streptozotocin for 5 consecutive days in mice. Myocardial injury markers, such as creatine kinase isoenzyme (CK-BM) and lactate dehydrogenase, were detected using ELISA. We used non-invasive transthoracic echocardiography to examine cardiac structure and function. Histological staining was used to explore myocardial morphology and fibrosis. Profibrotic markers and inflammatory cytokines were detected by ELISA and real-time PCR in vivo. The terminal deoxyribonucleotide transferasemediated dUTP nick end-labeling (TUNEL) and immunofluorescence assays were conducted to examine myocardial apoptosis and oxidative stress. Inflammatory cytokines induced by high glucose (HG) were also found in RAW264.7 macrophages. The underlying molecular mechanisms were determined using immunofluorescence and Western blotting analyses. Results: The Gal-3 knockdown was observed to ameliorate myocardial apoptosis, oxidative stress, inflammatory cytokines release, macrophage infiltration, and fibrosis, thus, decreasing cardiac dysfunction in DCM mice. In addition, the silence of Gal-3 could suppress macrophage infiltration and inflammatory cytokine release induced by HG. Finally, a Gal-3/NF-κB p65 regulatory network was clarified in the pathogenesis of DCM. Conclusion: The Gal-3 may promote myocardial apoptosis, oxidative stress, inflammation, and fibrosis in vivo and in vitro by the mechanism of reduction of NF-κB p65 activation.

Forward-Looking Roadmaps for Long-Term Continuous Water Quality Monitoring: Bottlenecks, Innovations, and Prospects in a Critical Review.

Long-term continuous monitoring (LTCM) of water quality can bring far-reaching influences on water ecosystems by providing spatiotemporal data sets of diverse parameters and enabling operation of water and wastewater treatment processes in an energy-saving and cost-effective manner. However, current water monitoring technologies are deficient for long-term accuracy in data collection and processing capability. Inadequate LTCM data impedes water quality assessment and hinders the stakeholders and decision makers from foreseeing emerging problems and executing efficient control methodologies. To tackle this challenge, this review provides a forward-looking roadmap highlighting vital innovations toward LTCM, and elaborates on the impacts of LTCM through a three-hierarchy perspective: data, parameters, and systems. First, we demonstrate the critical needs and challenges of LTCM in natural resource water, drinking water, and wastewater systems, and differentiate LTCM from existing short-term and discrete monitoring techniques. We then elucidate three steps to achieve LTCM in water systems, consisting of data acquisition (water sensors), data processing (machine learning algorithms), and data application (with modeling and process control as two examples). Finally, we explore future opportunities of LTCM in four key domains, water, energy, sensing, and data, and underscore strategies to transfer scientific discoveries to general end-users.

Mesoscopic simulation study on the structural transition of comb-shaped block copolymer lamellae on chemically patterned substrates: from vertical to lateral.

Directed self-assembly of polymers on chemically homogeneous and heterogeneous patterns is of considerable interest for nanolithography and nanofluidic devices. By employing dissipative particle dynamics (DPD) technology, we explore the nanoscale phase separation of comb-like block copolymers (CBCPs) confined at chemically homogeneous and heterogeneous substrates. Herein, the geometric and energetic influences of striped substrates on the microphases are firstly studied using various geometries of annular stripes for the heterogeneous substrates. Different parameters including the stripe geometry, substrate selectivity, and film thickness are studied systematically. T-Junction lamellae and acclivitous alignment are achieved on the heterogeneous substrates because of the synergy of geometrical effects of the striped pattern from heterogeneous substrates together with weak preference of the substrates toward one of the CBCP components. In this study, we provide a detailed understanding of microphase separation of CBCPs on the heterogeneous substrates, and the approach outlined in the present study offers a crucial tool for experimentalists to design CBCP thin films with complex device-oriented structures.

Impaired Cognitive Control of Emotional Conflict in Trait Anxiety: A Preliminary Study Based on Clinical and Non-Clinical Individuals.

BACKGROUND: It has been observed that trait anxiety easily leads to conflict maladaptation under conflict circumstances. However, it remains unclear whether the precise neural mechanisms underlying the effects of high trait anxiety (HTA) on cognitive control are consistent in high trait anxious individuals, with and without anxiety disorders. METHODS: The present study recruited 29 healthy volunteers with low trait anxiety (LTA), 37 healthy volunteers with HTA, and 23 patients with generalized anxiety disorder (GAD). All participants completed demographic information and self-report measures of trait anxiety and depression. Then, they performed the emotional flanker task with event-related potentials (ERPs) recorded. RESULTS: Behavioral data manifested that, relative to LTA individuals, GAD patients displayed prolonged response times and increased error rates, while HTA individuals showed intact response times and accuracies. Event-related potential (ERP) data revealed that HTA individuals exhibited a trend toward more negative N2 amplitudes for conflict detection. By contrast, both HTA and GAD individuals displayed decreased P3 amplitudes for conflict resolution. ERP results indicated that both HTA and GAD individuals exhibited conflict maladaptation on the N2 amplitude. Correlation analyses also showed that the increased anxiety symptoms were associated with longer reaction times, more error rates, lower P3 amplitudes, and more perturbations in conflict adaptation on reaction times and N2 amplitudes. CONCLUSION: Our results demonstrated a severely impaired cognitive control in GAD patients while a moderately impaired cognitive control in HTA individuals. Trait anxiety can indeed serve as a predominant factor at the onset and in the maintenance of GAD. Therefore, the trait anxiety reducing strategies may provide significant therapeutic gains.

Amphiphilic nanosheet self-assembly at the water/oil interface: computer simulations.

In this paper, dissipative particle dynamics simulations are performed to study the interfacial and emulsion stabilizing properties of various systems of amphiphilic nanosheets (ANs) self-assembled at the oil/water (O/W) interface. The ANs have a dimensional symmetry structure that encompasses a triangular-plate at the center and two soft comb-like shells constructed with hydrophilic and hydrophobic polymers. As the simulation results show, the AN molecules are highly oriented in interfacial films with their triangular nanosheets parallel to the O/W interface, while their hydrophobic and hydrophilic segments attempt to immerse into the oil phase and aqueous phase, respectively. These results reveal that the rotation of ANs at oil/water interfaces is greatly restricted, meanwhile, their nanosheet (or planar) configuration facilitates their favorable orientation thereby, thus making the emulsion more stable. At higher concentrations, a wrapped-like or micelle morphology is observed. The O/W emulsions stabilized by ANs were also simulated, and it is interesting to find AN 'patches' at the O/W interface which resembles the leather patches on a football. By introducing the "amphiphilic nanosheet balance" concept, the hydrophilic-lipophilic balance (HLB) values of ANs were calculated. Due to their properties of two-dimensional symmetry, the HLB values of ANs tend to approximately 1 which reveals a stronger stability for emulsions.

[Interactions between Goethite and Humic Acid and the Stability of Goethite-Humic Acid Complex].

Goethite-humic acid complex was prepared in a suspension containing goethite and humic acid. X-ray diffraction (XRD) results showed that the crystal structure of this complex had no obvious changes compared to pure goethite, but the peak intensity of the complex was slightly reduced. Transmission electron microscopy (TEM) images indicated that the surface of the goethite was coated by particles of humic acid. Compared to the infra-red (IR) spectra of goethite and humic acid, the anti-vibrational frequencies of COO- and the vibrational frequencies of ≡Fe-OH decreased by 20 cm-1 and 9 cm-1, respectively, while the vibrational frequencies of the associated hydroxyls increased by 10 cm-1 and the absorption band of carboxylic C-O and free hydroxyls almost disappeared. This indicates that the interactional mechanisms between goethite and humic acid include the monodentate coordination of Fe(Ⅲ) -carboxylate and hydrogen-bonds. Thermogravimetry/differential thermogravimetry (TG/DTG) analysis showed that the temperature of the weight loss peak for ≡Fe-OH in goethite and the complex were 258℃ and 276℃, respectively. This indicates that the coating of humic acid enhances the heat stability of ≡Fe-OH in goethite. Compared with humic acid, the temperature of the weight loss peak for aliphatic organics and aromatic organics in complex decreased by 60℃ and 26℃, respectively and the ratio of weight loss from aliphatic organics to aromatic organics in complex increased. This indicates that organics with a lower heat stability may be more easily adsorbed onto goethite and the affinity to goethite was higher for the aliphatic organics than for aromatic organics. After ultrasonic dispersion, the content of large particles (≥ 2 µm) decreased significantly for both goethite and humic acid, but the content and the size of large particles in the complex changed only slightly.

Highly sensitive fluorescence quantitative detection of specific DNA sequences with molecular beacons and nucleic acid dye SYBR Green I.

A highly sensitive fluorescence method of quantitative detection for specific DNA sequence is developed based on molecular beacon (MB) and nucleic acid dye SYBR Green I by synchronous fluorescence analysis. It is demonstrated by an oligonucleotide sequence of wild-type HBV (target DNA) as a model system. In this strategy, the fluorophore of MB is designed to be 6-carboxyfluorescein group (FAM), and the maximum excitation wavelength and maximum emission wavelength are both very close to that of SYBR Green I. In the presence of targets DNA, the MBs hybridize with the targets DNA and form double-strand DNA (dsDNA), the fluorophore FAM is separated from the quencher BHQ-1, thus the fluorophore emit fluorescence. At the same time, SYBR Green I binds to dsDNA, the fluorescence intensity of SYBR Green I is significantly enhanced. When targets DNA are detected by synchronous fluorescence analysis, the fluorescence peaks of FAM and SYBR Green I overlap completely, so the fluorescence signal of system will be significantly enhanced. Thus, highly sensitive fluorescence quantitative detection for DNA can be realized. Under the optimum conditions, the total fluorescence intensity of FAM and SYBR Green I exhibits good linear dependence on concentration of targets DNA in the range from 2×10(-11) to 2.5×10(-9)M. The detection limit of target DNA is estimated to be 9×10(-12)M (3σ). Compared with previously reported methods of detection DNA with MB, the proposed method can significantly enhance the detection sensitivity.