RESUMEN
Laminated graphene film has great potential in compact high-power capacitive energy storage owing to the high bulk density and opened architecture. However, the high-power capability is usually limited by tortuous cross-layer ion diffusion. Herein, microcrack arrays are fabricated in graphene films as fast ion diffusion channels, converting tortuous diffusion into straightforward diffusion while maintaining a high bulk density of 0.92 g cm-3 . Films with optimized microcrack arrays exhibit sixfold improved ion diffusion coefficient and high volumetric capacitance of 221 F cm-3 (240 F g-1 ), representing a critical breakthrough in optimizing ion diffusion toward compact energy storage. This microcrack design is also efficient for signal filtering. Microcracked graphene-based supercapacitor with 30 µg cm-2 mass loading exhibits characteristic frequency up to 200 Hz with voltage window up to 4 V, showing high promise for compact, high-capacitance alternating current (AC) filtering. Moreover, a renewable energy system is conducted using microcrack-arrayed graphene supercapacitors as filter-capacitor and energy buffer, filtering and storing the 50 Hz AC electricity from a wind generator into the constant direct current, stably powering 74 LEDs, demonstrating enormous potential in practical applications. More importantly, this microcracking approach is roll-to-roll producible, which is cost-effective and highly promising for large-scale manufacture.
RESUMEN
Spontaneous liquid-gas imbibition at 293.2K and 0.1 MPa was conducted to assess the micropore size and size-exclusion property of carbon molecular sieves (CMS). The CMS were firstly saturated with N(2) and then immersed into water. The volume of gas recovered by the water imbibition was measured and applied to evaluate the density of the N(2) adsorbed in the CMS. The micropore size of the CMS was determined by comparing the N(2) density from the water-N(2) imbibition with that calculated by grand canonical simulation. The micropore size evaluated by the liquid-gas imbibition coincides with that obtained by N(2) adsorption at ambient temperature. The size-exclusion property of the CMS was estimated through comparing the N(2) recovery by imbibition of liquids with increasing molecular dimensions, that is, water, benzene, and cyclohexane. The amount of N(2) recovered from benzene imbibition is dramatically less than that from the water imbibition, showing that the dominated micropore size of the CMS is smaller than 0.37 nm. Furthermore, the effect of chemical vapor deposition treatment on the porous texture of the CMS was revealed by the liquid-gas imbibition.
