Mining the Carbon Intermediates in Plastic Waste Upcycling for Constructing C-S Bond.

Postconsumer plastics are generally perceived as valueless with only a small portion of plastic waste being closed-loop recycled into similar products while most of them are discarded in landfills. Depositing plastic waste in landfills not only harms the environment but also signifies a substantial economic loss. Alternatively, constructing value-added chemical feedstocks via mining the waste-derived intermediate species as a carbon (C) source under mild electrochemical conditions is a sustainable strategy to realize the circular economy. This proof-of-concept work provides an attractive "turning trash to treasure" strategy by integrating electrocatalytic polyethylene terephthalate (PET) plastic upcycling with a chemical C-S coupling reaction to synthesize organosulfur compounds, hydroxymethanesulfonate (HMS). HMS can be produced efficiently (Faradaic efficiency, FE of ∼70%) via deliberately capturing electrophilic intermediates generated in the PET monomer (ethylene glycol, EG) upcycling process, followed by coupling them with nucleophilic sulfur (S) species (i.e., SO32- and HSO3-). Unlike many previous studies conducted under alkaline conditions, PET upcycling was performed over an amorphous MnO2 catalyst under near-neutral conditions, allowing for the stabilization of electrophilic intermediates. The compatibility of this strategy was further investigated by employing biomass-derived compounds as substrates. Moreover, comparable HMS yields can be achieved with real-world PET plastics, showing its enormous potential in practical application. Lastly, Density function theory (DFT) calculation reveals that the C-C cleavage step of EG is the rate-determining step (RDS), and amorphous MnO2 significantly decreases the energy barriers for both RDS and C-S coupling when compared to the crystalline counterpart.

Spatially selective p-type doping for constructing lateral WS2 p-n homojunction via low-energy nitrogen ion implantation.

The construction of lateral p-n junctions is very important and challenging in two-dimensional (2D) semiconductor manufacturing process. Previous researches have demonstrated that vertical p-n junction can be prepared simply by vertical stacking of 2D materials. However, interface pollution and large area scalability are challenges that are difficult to overcome with vertical stacking technology. Constructing 2D lateral p-n homojunction is an effective strategy to address these issues. Spatially selective p-type doping of 2D semiconductors is expected to construct lateral p-n homojunction. In this work, we have developed a low-energy ion implantation system that reduces the implanted energy to 300 eV. Low-energy implantation can form a shallow implantation depth, which is more suitable for modulating the electrical and optical properties of 2D materials. Hence, we utilize low-energy ion implantation to directly dope nitrogen ions into few-layer WS2 and successfully realize a precise regulation for WS2 with its conductivity type transforming from n-type to bipolar or even p-type conduction. Furthermore, the universality of this method is demonstrated by extending it to other 2D semiconductors, including WSe2, SnS2 and MoS2. Based on this method, a lateral WS2 p-n homojunction is fabricated, which exhibits significant rectification characteristics. A photodetector based on p-n junction with photovoltaic effect is also prepared, and the open circuit voltage can reach to 0.39 V. This work provides an effective way for controllable doping of 2D semiconductors.

Cu Promoted the Dynamic Evolution of Ni-Based Catalysts for Polyethylene Terephthalate Plastic Upcycling.

Upcycling plastic wastes into value-added chemicals is a promising approach to put end-of-life plastic wastes back into their ecocycle. As one of the polyesters that is used daily, polyethylene terephthalate (PET) plastic waste is employed here as the model substrate. Herein, a nickel (Ni)-based catalyst was prepared via electrochemically depositing copper (Cu) species on Ni foam (NiCu/NF). The NiCu/NF formed Cu/CuO and Ni/NiO/Ni(OH)2 core-shell structures before electrolysis and reconstructed into NiOOH and CuOOH/Cu(OH)2 active species during the ethylene glycol (EG) oxidation. After oxidation, the Cu and Ni species evolved into more reduced species. An indirect mechanism was identified as the main EG oxidation (EGOR) mechanism. In EGOR, NiCu60s/NF catalyst exhibited an optimal Faradaic efficiency (FE, 95.8%) and yield rate (0.70 mmol cm-2 h-1) for formate production. Also, over 80% FE of formate was achieved when a commercial PET plastic powder hydrolysate was applied. Furthermore, commercial PET plastic water bottle waste was employed as a substrate for electrocatalytic upcycling, and pure terephthalic acid (TPA) was recovered only after 1 h electrolysis. Lastly, density functional theory (DFT) calculation revealed that the key role of Cu was significantly reducing the Gibbs free-energy barrier (ΔG) of EGOR's rate-determining step (RDS), promoting catalysts' dynamic evolution, and facilitating the C-C bond cleavage.

Electrocatalytic hydrogenation of acetonitrile to ethylamine in acid.

Electrochemical hydrogenation of acetonitrile based on well-developed proton exchange membrane electrolyzers holds great promise for practical production of ethylamine. However, the local acidic condition of proton exchange membrane results in severe competitive proton reduction reaction and poor selection toward acetonitrile hydrogenation. Herein, we conduct a systematic study to screen various metallic catalysts and discover Pd/C exhibits a 43.8% ethylamine Faradaic efficiency at the current density of 200 mA cm-2 with a specific production rate of 2912.5 mmol g-1 h-1, which is about an order of magnitude higher than the other screened metal catalysts. Operando characterizations indicate the in-situ formed PdHx is the active centers for catalytic reaction and the adsorption strength of the *MeCH2NH2 intermediate dictates the catalytic selectivity. More importantly, the theoretical analysis reveals a classic d-band mediated volcano curve to describe the relation between the electronic structures of catalysts and activity, which could provide valuable insights for designing more effective catalysts for electrochemical hydrogenation reactions and beyond.

Tuning Surface Potential Polarization to Enhance N2 Affinity for Ammonia Electrosynthesis.

Electrocatalytic N2 reduction reaction (NRR) to synthesize ammonia is a sustainable reaction that is expected to replace Haber Bosch process. Laminated Bi2WO6 has great potential as an NRR electrocatalyst, however, the effective activity requires that the inert substrate is fully activated. Here, for the first time, success is achieved in activating the Bi2WO6 basal planes with NRR activity through Ti doping. The introduction of Ti successfully tunes the surface potential distribution and enhances the N2 adsorption. The subsequently strong hybrid coupling of d(Ti)-p(N) orbitals fills the electronic state of N2 antibonding molecular orbital, which greatly weakens the bonding strength of N≡N bonds. Further, in situ synchrotron radiation-based Fourier transform infrared (SR-FTIR) spectrum and theoretical calculations show that surface potential polarization enhances the adsorption of HNN* by Bi-Ti dual-metal sites, which is beneficial for the subsequent activation hydrogenation process. The Ti-Bi2WO6 nanosheets achieve 11.44% Faradaic efficiency (-0.2 V vs. RHE), a NH3 yield rate of 23.14 µg mg-1 h-1 (15N calibration), and satisfactory stability in 0.1 M HCl environment. The mutual assistance of theory and experiment can help understand and develop of excellent two-dimensional (2D) materials for the NRR.

Selective NOx- Electroreduction to Ammonia on Isolated Ru Sites.

Nitrate and nitrite (NOx-) are widespread contaminants in industrial wastewater and groundwater. Sustainable ammonia (NH3) production via NOx- electroreduction provides a prospective alternative to the energy-intensive industrialized Haber-Bosch process. However, selectively regulating the reaction pathway, which involves complicated electron/proton transfer, toward NH3 generation relies on the robust catalyst. A specific consideration in designing selective NOx--to-NH3 catalysts should meet the criteria to suppress competing hydrogen evolution and avoid the presence of neighboring active sites that are in favor of adverse N-N coupling. Nevertheless, efforts in this regard are still inadequate. Herein, we demonstrate that isolated ruthenium sites can selectively reduce NOx- into NH3, with maximal Faradaic efficiencies of 97.8% (NO2- reduction) and 72.8% (NO3- reduction) at -0.6 and -0.4 V, respectively. Density functional theory calculations simulated the reaction mechanisms and identified the *NO → *NOH as the potential rate-limiting step for NOx--to-NH3 conversion on single-atom Ru sites.

Zinc Single Atom Confinement Effects on Catalysis in 1T-Phase Molybdenum Disulfide.

Active sites are atomic sites within catalysts that drive reactions and are essential for catalysis. Spatially confining guest metals within active site microenvironments has been predicted to improve catalytic activity by altering the electronic states of active sites. Using the hydrogen evolution reaction (HER) as a model reaction, we show that intercalating zinc single atoms between layers of 1T-MoS2 (Zn SAs/1T-MoS2) enhances HER performance by decreasing the overpotential, charge transfer resistance, and kinetic barrier. The confined Zn atoms tetrahedrally coordinate to basal sulfur (S) atoms and expand the interlayer spacing of 1T-MoS2 by ∼3.4%. Under confinement, the Zn SAs donate electrons to coordinated S atoms, which lowers the free energy barrier of H* adsorption-desorption and enhances HER kinetics. In this work, which is applicable to all types of catalytic reactions and layered materials, HER performance is enhanced by controlling the coordination geometry and electronic states of transition metals confined within active-site microenvironments.

Low Surface Accessible Area NanoCoral TiO2 for the Reduction of Foreign Body Reaction During Implantation.

The entry of implants triggers the secretion of damage associated molecular patterns (DAMPs) that recruit dendritic cells (DCs) and results in subsequent foreign body reaction (FBR). Though several studies have illustrated that the surface accessible area (SAA) of implants plays a key role in the process of DAMPs release and absorption, the effect of SAA on the immune reaction still remains unknown. Here, a series of TiO2 plates with different SAA is fabricated to investigate the relationship between SAA and FBR. Compared with larger SAA surface, the aggregation of DC is significantly inhibited by lower SAA surface. Total internal reflection microscopy (TIRFM) and molecular dynamic (MD) simulation show that although high mobility group box 1 (HMGB1) is adsorbed more on plates with lower SAA, the exposure ratio of cysteine (CYS) residue in HMGB1 is significantly decreased in lower SAA group. The lower exposure of CYS reduces the activation of Toll-like receptors 4 (TLR4), which down-regulates the expression of myeloid differentiation factor (Myd88)-TNF receptor associated factor 6 (TRAF6) to inhibit nuclear factor kappa B (NF-κB) signaling. Generally, this study reveals the mechanism of how SAA, a nanoscale property, affects FBR from perspective of DAMPs, and provides a new direction for designing better biocompatible implants.

The effect of Laves phase on heavy-ion radiation response of Nb-containing FeCrAl alloy for accident-tolerant fuel cladding.

As a promising candidate material for the accident tolerant fuel cladding in light water reactors, the Nb-containing FeCrAl alloy has shown outstanding out-of-pile service performance due to the Laves phase precipitation. In this work, the radiation response in FeCrAl alloys with gradient Nb content under heavy ion radiation has been investigated. The focus is on the effect of the Laves phase on irradiation-induced defects and hardening. We found that the phase boundary between the matrix and Laves phase can play a critical role in capturing radiation defects, as verified by in-situ heavy-ion radiation experiments and molecular dynamic simulations. Additionally, the evolution of Laves phase under radiation is analyzed. Radiation-induced amorphization and segregations observed at high radiation doses will deepen the fundamental understanding of the stability of Laves phases in the radiation environment.

Strong Penetration-Induced Effective Photothermal Therapy by Exosome-Mediated Black Phosphorus Quantum Dots.

Nanocancer medicine, such as photothermal therapy (PTT), as a promising way to solve cancer without side effects, faces a huge biological barrier during the circulation of nanoparticles in the body, including nanobiological interactions in the blood, isolation of nanoparticles in the macrophage system, tumor spillover effect, and especially uneven intratumoral distribution of nanoparticles, which cast a shadow over the hope. To address the problem of intratumoral distribution, an effective photothermal agent is introduced by packaging the black phosphorus quantum dots (BPQDs) into exosome vector (EXO) through electroporation method. With the improving and proper stability for better therapy, the resulting BPQDs@EXO nanospheres (BEs) exhibit good biocompatibility, long circulation time, and excellent tumor targeting ability, hence impressive PTT efficiency evidenced by highly efficient tumor ablation in vivo. Importantly, great permeability on organoids contributed by EXO appears with BEs, which strongly promotes the efficient killing ability. These BP-based nanospheres must promise high clinical potential due to the high PTT efficiency and minimal side effects.

Force-Induced Turn-On Persistent Room-Temperature Phosphorescence in Purely Organic Luminogen.

Research of purely organic room-temperature phosphorescence (RTP) materials has been a hot topic, especially for those with stimulus response character. Herein, an abnormal stimulus-responsive RTP effect is reported, in which, purely organic luminogen of Czs-ph-3F shows turn-on persistent phosphorescence under grinding. Careful analyses of experimental results, coupled with the theoretical calculations, show that the transition of molecular conformation from quasi-axial to quasi-equatorial of the phenothiazine group should be mainly responsible for this exciting result. Furthermore, the applications of stylus printing and thermal printing are both successfully realized, based on the unique RTP effect of Czs-ph-3F.

Size-Dependent Nickel-Based Electrocatalysts for Selective CO2 Reduction.

Closing the anthropogenic carbon cycle by converting CO2 into reusable chemicals is an attractive solution to mitigate rising concentrations of CO2 in the atmosphere. Herein, we prepared Ni metal catalysts ranging in size from single atoms to over 100 nm and distributed them across N-doped carbon substrates which were obtained from converted zeolitic imidazolate frameworks (ZIF). The results show variance in CO2 reduction performance with variance in Ni metal size. Ni single atoms demonstrate a superior Faradaic efficiency (FE) for CO selectivity (ca. 97 % at -0.8 V vs. RHE), while results for 4.1 nm Ni nanoparticles are slightly lower (ca. 93 %). Further increase the Ni particle size to 37.2 nm allows the H2 evolution reaction (HER) to compete with the CO2 reduction reaction (CO2 RR). The FE towards CO production decreases to under 30 % and HER efficiency increase to over 70 %. These results show a size-dependent CO2 reduction for various sizes of Ni metal catalysts.

Exploring Bi2 Te3 Nanoplates as Versatile Catalysts for Electrochemical Reduction of Small Molecules.

The electroreduction of small molecules to high value-added chemicals is considered as a promising way toward the capture and utilization of atmospheric small molecules. Discovering cheap and efficient electrocatalysts with simultaneously high activity, selectivity, durability, and even universality is desirable yet challenging. Herein, it is demonstrated that Bi2 Te3 nanoplates (NPs), cheap and noble-metal-free electrocatalysts, can be adopted as highly universal and robust electrocatalysts, which can efficiently reduce small molecules (O2 , CO2 , and N2 ) into targeted products simultaneously. They can achieve excellent activity, selectivity and durability for the oxygen reduction reaction with almost 100% H2 O2 selectivity, the CO2 reduction reaction with up to 90% Faradaic efficiency (FE) of HCOOH, and the nitrogen reduction reaction with 7.9% FE of NH3 . After electrochemical activation, an obvious Te dissolution happens on the Bi2 Te3 NPs, creating lots of Te vacancies in the activated Bi2 Te3 NPs. Theoretical calculations reveal that the Te vacancies can modulate the electronic structures of Bi and Te. Such a highly electroactive surface with a strong preference in supplying electrons for the universal reduction reactions improves the electrocatalytic performance of Bi2 Te3 . The work demonstrates a new class of cheap and versatile catalysts for the electrochemical reduction of small molecules with potential practical applications.

Springtail-Inspired Superamphiphobic Ordered Nanohoodoo Arrays with Quasi-Doubly Reentrant Structures.

The skin of springtails is well-known for being able to repel water and organic liquids using their hexagonally arranged protrusions with reentrant structures. Here, a method to prepare 100 nm-sized nanohoodoo arrays with quasi-doubly reentrant structures over square centimeters through combining the nanosphere lithography and the template-protected selective reactive ion etching technique is demonstrated. The top size of the nanohoodoos, the intra-nanohoodoo distance, and the height of the nanohoodoos can be readily controlled by the plasma-etching time of the polystyrene (PS) spheres, the size of the PS spheres used, and the reactive ion etching time of silicon. The strong structural control capability allows for the study of the relationship between the nanohoodoo structure and the wetting property. Superamphiphobic nanohoodoo arrays with outstanding water/organic liquid repellent properties are finally obtained. The superamphiphobic and liquid repellent properties endow the nanohoodoo arrays with remarkable self-cleaning performance even using hot water droplets, anti-fogging performance, and the surface-enhanced Raman scattering sensitivity improvement by enriching the analyte molecules on the nanohoodoo arrays. Overall, the simple and massive production of the superamphiphobic nanohoodoo structures will push their practical application processes in diverse fields where wettability and liquid repellency need to be carefully engineered.

Photo/Bio-Electrochemical Systems for Environmental Remediation and Energy Harvesting.

Water and energy systems are interdependent: water is utilized in each stage of energy production, and energy is required to extract, treat, and deliver water for many uses. However, energy and water systems are usually developed and managed independently. In the quest to develop environmentally friendly and energy-efficient solutions for water and energy issues, photoelectrochemical (PEC) energy conversion and microbial electrochemical (MEC) systems show profound potential for addressing environmental remediation problems and harvesting energy simultaneously. Herein, PEC, MEC, and their variant hybrid systems toward energy conversion and environmental remediation are summarized and discussed.

Ultrastable Laurionite Spontaneously Encapsulates Reduced-dimensional Lead Halide Perovskites.

Reduced dimensional lead halide perovskites (RDPs) have attracted great research interest in diverse optical and optoelectronic fields. However, their poor stability is one of the most challenging obstacles prohibiting them from practical applications. Here, we reveal that ultrastable laurionite-type Pb(OH)Br can spontaneously encapsulate the RDPs in their formation solution without introducing any additional chemicals, forming RDP@Pb(OH)Br core-shell microparticles. Interestingly, the number of the perovskite layers within the RDPs can be conveniently and precisely controlled by varying the amount of CsBr introduced into the reaction solution. A single RDP@Pb(OH)Br core-shell microparticle composed of RDP nanocrystals with different numbers of perovskite layers can be also prepared, showing different colors under different light excitations. More interestingly, barcoded RDP@Pb(OH)Br microparticles with different parts emitting different lights can also be prepared. The morphology of the emitting microstructures can be conveniently manipulated. The RDP@Pb(OH)Br microparticles demonstrate outstanding environmental, chemical, thermal, and optical stability, as well as strong resistance to anion exchange processes. This study not only deepens our understanding of the reaction processes in the extensively used saturation recrystallization method but also points out that it is highly possible to dramatically improve the performance of the optoelectronic devices through manipulating the spontaneous formation process of Pb(OH)Br.

Formation of nanoripples on ZnO flat substrates and nanorods by gas cluster ion bombardment.

In the present study Ar+ cluster ions accelerated by voltages in the range of 5-10 kV are used to irradiate single crystal ZnO substrates and nanorods to fabricate self-assembled surface nanoripple arrays. The ripple formation is observed when the incidence angle of the cluster beam is in the range of 30-70°. The influence of incidence angle, accelerating voltage, and fluence on the ripple formation is studied. Wavelength and height of the nanoripples increase with increasing accelerating voltage and fluence for both targets. The nanoripples formed on the flat substrates remind of aeolian sand ripples. The ripples formed at high ion fluences on the nanorod facets resemble well-ordered parallel steps or ribs. The more ordered ripple formation on nanorods can be associated with the confinement of the nanorod facets in comparison with the quasi-infinite surface of the flat substrates.

Active Electron Density Modulation of Co3 O4 -Based Catalysts Enhances their Oxygen Evolution Performance.

Despite the fact that many strategies have been developed to improve the efficiency of the oxygen evolution reaction (OER), the precise modulation of the surface electronic properties of catalysts to improve their catalytic activity is still challenging. Herein, we demonstrate that the surface active electron density of Co3 O4 can be effectively regulated by an argon-ion irradiation method. X-ray photoelectron and synchrotron x-ray absorption spectroscopy, UV photoelectron spectrometry, and DFT calculations show that the surface active electron density band center of Co3 O4 has been upshifted, leading to a significantly enhanced absorption capability of the oxo group. The optimized Co3 O4 -based catalysts exhibit an excellent overpotential of 260 mV at 10 mA cm-2 and Tafel slope of 54 mV dec-1 , superior to the capability of the benchmark RuO2 , representing one of the best Co-based OER catalysts. This approach could guide the future rational design and discovery of ideal electrocatalysts.

Surface-Regulated Rhodium-Antimony Nanorods for Nitrogen Fixation.

Surface regulation is an effective strategy to improve the performance of catalysts, but it has been rarely demonstrated for nitrogen reduction reaction (NRR) to date. Now, surface-rough Rh2 Sb nanorod (RNR) and surface-smooth Rh2 Sb NR (SNR) were selectively created, and their performance for NRR was investigated. The high-index-facet bounded Rh2 Sb RNRs/C exhibit a high NH3 yield rate of 228.85±12.96 µg h-1 mg-1 Rh at -0.45 V versus reversible hydrogen electrode (RHE), outperforming the Rh2 Sb SNRs/C (63.07±4.45 µg h-1 mg-1 Rh ) and Rh nanoparticles/C (22.82±1.49 µg h-1 mg-1 Rh ), owing to the enhanced adsorption and activation of N2 on high-index facets. Rh2 Sb RNRs/C also show durable stability with negligible activity decay after 10 h of successive electrolysis. The present work demonstrates that surface regulation plays an important role in promoting NRR activity and provides a new strategy for creating efficient NRR electrocatalysts.

Beehive-Inspired Macroporous SERS Probe for Cancer Detection through Capturing and Analyzing Exosomes in Plasma.

The protein phosphorylation status of exosomes can regulate the activity and function of proteins related to cancer development, and it is highly possible to diagnose cancers through analyzing the protein phosphorylation status. However, monitoring the protein phosphorylation status with a simple and label-free method is still clinically challenging. Here, inspired by beehives, we developed an Au-coated TiO2 macroporous inverse opal (MIO) structure with an engineered "slow light effect" and thus with outstanding surface-enhanced Raman scattering (SERS) performance. The MIO structure can capture and analyze the exosomes from plasma of cancer patients without any labeling processes. It was found that the SERS intensity of exosomes at 1087 cm-1 arising from the P-O bond within the phosphoproteins can be used as a criterion for tumor liquid biopsies. The intensity of the 1087 cm-1 SERS peak from exosomes extracted from the plasma of cancer patients (prostate, lung, liver, and colon) is at least two times of that from healthy people. This indicates the simplicity and versatility of this method in cancer diagnostics. Our method has obvious advantages (noninvasive and time-saving) over currently clinically used tumor liquid biopsy techniques (such as western blot), which has great potentials to make vitro cancer diagnostics/monitoring as simple as diagnostics/monitoring of common diseases.