RESUMEN
Designing electrocatalysts for seawater splitting remains challenging. A Ru-Co alloy supported by an N-doped carbon substrate catalyst has been designed using etching and a low-temperature treatment method. Studies show that the superior performance of this catalyst is related to the hollow-structured N-doped carbon frame and surface reconstruction of the Ru-Co alloy.
RESUMEN
d-π overlap, which represents overlap between metal-d and graphene-π orbitals to facilitate electron transfer, has rarely been reported. Ni/PtNi-G2 exhibits exceptional performance in seawater hydrogen evolution due to the electron-rich surface on Pt resulting from enhanced d-π overlap and subsequent electron transfer from graphene and Ni to Pt.
RESUMEN
BACKGROUND: Using the published survival statistics from cancer registration or population-based studies, we aimed to describe the global pattern and trend of lung cancer survival. METHODS: By searching SinoMed, PubMed, Web of Science, EMBASE, and SEER, all survival analyses from cancer registration or population-based studies of lung cancer were collected by the end of November 2022. The survival rates were extracted by sex, period, and country. The observed, relative, and net survival rates of lung cancer were applied to describe the pattern and time changes from the late 1990s to the early 21st century. RESULTS: Age-standardized 5-year relative/net survival rate of lung cancer was typically low, with 10%-20% for most regions. The highest age-standardized relative/net survival rate was observed in Japan (32.9%, 2010-2014), and the lowest was in India (3.7%, 2010-2014). In most countries, the five-year age-standardized relative/net survival rates of lung cancer were higher in females and younger people. The patients with adenocarcinoma had a better prognosis than other groups. In China, the highest 5-year overall relative/net survival rates were 27.90% and 31.62% in men and women in Jiangyin (2012-2013). CONCLUSION: Over the past decades, the prognosis of lung cancer has gradually improved, but significant variations were also observed globally. Worldwide, a better prognosis of lung cancer can be observed in females and younger patients. It is essential to compare and evaluate the histological or stage-specific survival rates of lung cancer between different regions in the future.
Asunto(s)
Adenocarcinoma , Neoplasias Pulmonares , Masculino , Humanos , Femenino , Neoplasias Pulmonares/epidemiología , Tasa de Supervivencia , Adenocarcinoma/patología , Pronóstico , Análisis de Supervivencia , IncidenciaRESUMEN
Carbon-supported Pt-based materials are highly promising electrocatalysts. The carbon support plays an important role in the Pt-based catalysts by remarkably influencing the growth, particle size, morphology, dispersion, electronic structure, physiochemical property and function of Pt. This review summarizes recent progress made in the development of carbon-supported Pt-based catalysts, with special emphasis being given to how activity and stability enhancements are related to Pt-C interactions in various carbon supports, including porous carbon, heteroatom doped carbon, carbon-based binary support, and their corresponding electrocatalytic applications. Finally, the current challenges and future prospects in the development of carbon-supported Pt-based catalysts are discussed.
RESUMEN
Many attempts have been made to enhance the relatively poor electrochemical activity of Ni3S2 for the oxygen evolution reaction (OER) by elevating the d-band center. Unfortunately, only limited success has been encountered thus far. Owning to the lower electronegativity and one less 3d electron relative to Ni, Fe shows great potentials in upshifting the overall d-band center of Ni3S2 when incorporating into its crystal structures. Herein, to enhance the intrinsic activity by elevating the d-band center, Ni3S2 nanosheets incorporated with suitable Fe content have been fabricated by a facile one-step solvothermal method. The obtained Fe-incorporated Ni3S2 catalyst exhibits an outstanding OER performance in alkaline media, only requiring 244 mV overpotential (with a reduction of 210 mV compared to Ni3S2) at 50 mA cm-2 in 1 M KOH and without obvious degradation after sustaining for a 60 h test at a voltage above 1.5 V. Ultraviolet photoemission spectroscopy and density functional theory calculations consistently demonstrate that the superior performance of Fe-incorporated Ni3S2 is attributed to the upshift of the d-band center on neutralizing the electron densities of Ni, which optimize greatly the adsorption energy of the intermediate (OOH*) in the rate-determining Volmer step.
RESUMEN
A solvothermal method to prepare PtNi alloys that have differing morphologies is described. By adjusting the feed ratio of Pt and Ni precursors in this process, PtNi alloys with different compositions (Pt : Ni atomic ratio from 1 : 3 to 3 : 1) and morphologies (evolution from nanobranches to nanoparticles) are generated. The prepared Pt48 Ni52 alloy, which has a composite morphology comprised of nanobranches and nanoparticles, exhibits superior activity and durability towards the hydrogen evolution reaction (HER) in seawater compared to those of commercial Pt/C catalyst and other PtNi alloys that have different compositions and morphologies. The excellent seawater HER performance of Pt48 Ni52 is ascribed to its nanobranch/nanoparticle morphology that optimally facilitates electron accumulation on Pt, which enhances resistance to chloride corrosion in seawater.
Asunto(s)
Aleaciones , Cloruros , Corrosión , Halógenos , Hidrógeno , Agua de MarRESUMEN
An electrocatalyst composed of RuO2 surrounded by interfacial carbon, is synthesized through controllable oxidization-calcination. This electrocatalyst provides efficient charge transfer, numerous active sites, and promising activity for pH-universal electrocatalytic overall seawater splitting. An electrolyzer with this catalyst gives current densities of 10 mA cm-2 at a record low cell voltage of 1.52 V, and shows excellent durability at current densities of 10 mA cm-2 for up to 100 h. Based on the results, a mechanism for the catalytic activity of the composite is proposed. Finally, a solar-driven system is assembled and used for overall seawater splitting, showing 95% Faraday efficiency.
RESUMEN
Fractal Pt-based materials with hierarchical structures and high self-similarity have attracted more and more attention due to their bioinspiring maximum optimization of energy utilization and mass transfer. However, their high-efficiency design of the mass- and electron-transfer still remains to be a great challenge. Herein, fractal PtPdCu hollow sponges (denoted as PtPdCu-HS) facilitating both directed mass- and electron-transfer are presented. Such directed transfer effects greatly promote electrocatalytic activity, regarded as 3.9 times the mass activity, 7.3 times the specific activity, higher poison tolerance, and higher stability than commercial Pt/C for the methanol oxidation reaction (MOR). A new "directed mass- and electron-transfer" concept, characteristics, and mechanism are proposed at the micro/nanoscale to clarify the structural design and functional enhancement of fractal electrocatalyst. This work displays new possibilities for designing novel nanomaterials with high activity and superior stability toward electrocatalysis or other practical applications.
Asunto(s)
Electrones , Fractales , Catálisis , Transporte de Electrón , Oxidación-ReducciónRESUMEN
A novel and facile strategy is presented to synthesize highly dispersed Pt nanoparticles embedded in N-doped porous carbon (Pt@NPC) via carbonization of Zn-containing metal-organic frameworks and chemical replacement of Zn with Pt. The as-prepared Pt@NPC exhibits superior activity and durability towards hydrogen evolution reaction (HER) in comparison with commercial Pt/C catalyst. The excellent HER performance of Pt@NPC can be ascribed to the combined features of catalyst and support material, including high dispersion and ultrathin particle size of Pt, high surface area and nitrogen doping of carbon support, and the strong interaction between metal and support.
RESUMEN
We report an alternating-reduction approach by galvanic replacement and co-reduction to enable incorporation of Pd into Pt shell, and the obtained PtPd hollow nanocubes with an enhanced alloy effect and highly active {100} facets show high catalytic activity and superior durability in the methanol oxidation reaction.
RESUMEN
Covalent triazine frameworks (CTFs) are little investigated, albeit they are promising candidates for electrocatalysis, especially for the oxygen evolution reaction (OER). In this work, nickel nanoparticles (from Ni(COD)2) were supported on CTF-1 materials, which were synthesized from 1,4-dicyanobenzene at 400 °C and 600 °C by the ionothermal method. CTF-1-600 and Ni/CTF-1-600 show high catalytic activity towards OER and a clear activity for the electrochemical oxygen reduction reaction (ORR). Ni/CTF-1-600 requires 374 mV overpotential in OER to reach 10 mA/cm2, which outperforms the benchmark RuO2 catalyst, which requires 403 mV under the same conditions. Ni/CTF-1-600 displays an OER catalytic activity comparable with many nickel-based electrocatalysts and is a potential candidate for OER. The same Ni/CTF-1-600 material shows a half-wave potential of 0.775 V for ORR, which is slightly lower than that of commercial Pt/C (0.890 V). Additionally, after accelerated durability tests of 2000 cycles, the material showed only a slight decrease in activity towards both OER and ORR, demonstrating its superior stability.
RESUMEN
Spatial catalytic acid-base-Pd triple-sites of a hierarchical core-shell structure have been successfully constructed for a three-step reaction, and exhibited excellent catalytic activity and stability. A catalytic mechanism has been systematically studied via single one- and two-step reactions, and possible molecular reactions have been proposed.
RESUMEN
A proof-of-concept strategy for significant enhancement of hydrogen evolution reaction (HER) performance of transition metals via construction of a metal/semiconductor Schottky junction is presented. The decoration of low-cost commercial TiO2 nanoparticles on the surface of microscale Co dendrites causes a significant charge transfer across the Co/TiO2 Schottky interface and enhances the local electron density at the Co surface, confirmed by X-ray photoelectron spectroscopy results and density functional theory calculations. The Co/TiO2 Schottky catalyst displays superior HER activity with a turnover frequency of 0.052 s-1 and an exchange current density of 79 µA cm-2, which are about 4.3 and 4.0 times greater than that of pristine Co, respectively. Moreover, the Co/TiO2 Schottky catalyst displays excellent electrochemical durability for long-term operation in both alkaline solution and high saline solution. Theoretical calculations suggest that the Schottky junction plays an important role to optimize hydrogen adsorption free energy (ΔGH*) by tuning the electronic structure, which enhances the performance for HER of the Co/TiO2 Schottky catalyst. This study of modulating the electronic structure of the catalysts via the Schottky junction could provide valuable insights for designing and synthesizing low-cost, high-performance electrocatalysts.
RESUMEN
Single cell surface engineering provides the most efficient, non-genetic strategy to enhance cell stability. However, it remains a huge challenge to improve cell stability in complex artificial environments. Here, a soft biohybrid interfacial layer is fabricated on individual living-cell surfaces by their exposure to a suspension of gold nanoparticles and l-cysteine to form a protecting functional layer to which porous silica layers were bound yielding pores with a diameter of 3.9 nm. The living cells within the bilayered nanoshells maintained high viability (96 ± 2%) as demonstrated by agar plating, even after five cycles of simultaneous exposure to high temperature (40 °C), lyticase and UV light. Moreover, yeast cells encapsulated in bilayered nanoshells were more recyclable than native cells due to nutrient storage in the shell.
RESUMEN
Hierarchically dual-mesoporous TiO2 microspheres have been synthesized by a solvothermal process in the presence of 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF4 ]) and diethylenetriamine (DETA) as co-templates. Secondary mesostructured defects in the hierarchical TiO2 microspheres produce oxygen vacancies, which not only significantly enhance photocatalytic activity in the degradation of methylene blue (1.7â times that with P25) and acetone (2.9â times that with P25), but are also beneficial for lithium storage. Moreover, we propose a mechanism to rationalize the role of this dual mesoporosity of the TiO2 microspheres in enhancing molecular diffusion, ion transportation, and electronic transitions.
RESUMEN
Hierarchical MoS2 @TiO2 heterojunctions were synthesized through a one-step hydrothermal method by using protonic titanate nanosheets as the precursor. The TiO2 nanosheets prevent the aggregation of MoS2 and promote the carrier transfer efficiency, and thus enhance the photocatalytic and electrocatalytic activity of the nanostructured MoS2 . The obtained MoS2 @TiO2 has significantly enhanced photocatalytic activity in the degradation of rhodamineâ B (over 5.2â times compared with pure MoS2 ) and acetone (over 2.8â times compared with pure MoS2 ). MoS2 @TiO2 is also beneficial for electrocatalytic hydrogen evolution (26â times compared with pure MoS2 , based on the cathodic current density). This work offers a promising way to prevent the self-aggregation of MoS2 and provides a new insight for the design of heterojunctions for materials with lattice mismatches.
RESUMEN
Highly dispersed PtPd bimetallic nanocrystals with enhanced catalytic activity and stability were prepared by adjusting the interfacial wettability of the reaction solution on a commercial carbon support. This approach holds great promise for the development of high-performance and low-cost catalysts for practical applications.
RESUMEN
Inspired by the characteristics of cells in live organisms, new types of hybrids have been designed comprising live cells and abiotic materials having a variety of structures and functionalities. The major goal of these studies is to uncover hybridization approaches that promote cell stabilization and enable the introduction of new functions into living cells. Single-cells in nanoshells have great potential in a large number of applications including bioelectronics, cell protection, cell therapy, and biocatalysis. In this review, we discuss the results of investigations that have focused on the synthesis, structuration, functionalization, and applications of these single-cells in nanoshells. We describe synthesis methods to control the structural and functional features of single-cells in nanoshells, and further develop their applications in sustainable energy, environmental remediation, green biocatalysis, and smart cell therapy. Perceived limitations of single-cells in nanoshells have been also identified.
Asunto(s)
Materiales Biocompatibles Revestidos , Nanocáscaras , Análisis de la Célula Individual , Propiedades de SuperficieRESUMEN
The metal-organic framework (MOF) MIL-101Cr was readily encapsulated by a very thin shell (around 30 nm) of hydrophobic mesoporous silica, which replicates the irregular shape of the MOF nanocrystals. Such a silica shell facilitates the diffusion of hydrophobic reactants with enhancement of the catalytic activity of the MOF and significantly improved catalytic stability of the MOF in the oxidation of indene.
RESUMEN
Cubic Pd nanocrystals with shape-controlled mesoporous silica shells have been theoretically designed and successfully synthesized for investigating the effect of a porous nanoshell on catalytic performance of the core. Cubic Pd@cubic mesoporous silica keeps activity of all facets and shows highest catalytic activity and enhanced reusability in the hydrogenation of nitrobenzene.