Kinetic Model for Denitration Reaction Process of Cylindrical Single-Base Gun Propellant.

As a new type of progressive energy release propellant, nitro gradiently distributed propellant (NGDP) was prepared by a denitration reaction between a denitration reagent and the propellant to remove the energy-containing functional group (-O-NO2) from the surface of the propellant. The kinetics of the denitration reaction determines distribution of the nitrate group in the surface layer of NGDP, which further affects the combustion progressivity. In this paper, the kinetic model for the denitration reaction process of the cylindrical single-base gun propellant was studied by the shrinking unreacted core model (SUC model). The energy change of the propellant particles before and after the denitration reaction was used to evaluate the denitration rates, which were used to fit the proposed SUC cylindrical model. The results show that the rate-controlling step of the denitration reaction process is largely dependent on the concentration of the denitration reagent. At low concentrations (the concentration of the denitration reagent was 6%), the denitration reaction process was controlled by the chemical reaction, and the activation energy was found to be 48.40 kJ·mol-1. When the concentration increased (the concentration of the denitration reagent was 15%), the rate-controlling step changed to a solid product layer diffusion control with an activation energy of 84.77 kJ·mol-1. The kinetic models obtained in this study can provide theoretical guidance for the controlled preparation of NGDP with good combustion progressivity.

Highly sensitive determination of L-glutamic acid in pig serum with an enzyme-free molecularly imprinted polymer on a carbon-nanotube modified electrode.

Through electrochemical polymerization using L-glutamic acid (L-Glu) as a template and 4,6-diaminoresorcinol as a functional monomer, an enzyme-free molecularly imprinted polymer (MIP) based L-Glu sensor with multi-walled carbon nanotubes (MWCNTs) decorated on a glassy carbon electrode (GCE), namely G-MIP/MWCNTs/GCE, was developed in this work. The reaction conditions were optimized as follows: electrochemical polymerization of 23 cycles, pH of 3.0, molar ratio of template/monomer of 1 : 4, volume ratio of elution reagents of acetonitrile/formic acid of 1 : 1, and elution time of 2 min. The prepared materials and molecularly imprinted polymer were characterized by using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) as well as electrochemical methods. The electrochemical properties of different electrodes were investigated via differential pulse voltammetry (DPV), showing that the electrode of G-MIP/MWCNTs/GCE exhibited excellent catalytic oxidation activity towards L-Glu. A good linear relationship between peak-currents and L-Glu concentrations in a range from 1.00 × 10-8 to 1.00 × 10-5 mol L-1 was observed, with a detection limit of 5.13 × 10-9 mol L-1 (S/N = 3). The imprinted sensor possesses excellent selectivity, high sensitivity, and good stability, which have been successfully applied for the detection of L-Glu in pig serum samples with a recovery rate of 97.4-105.5%, being comparable to commercial high-performance liquid chromatography, demonstrating a simple, rapid, and accurate way for the determination of L-Glu in the fields of animal nutrition and biomedical engineering.

An Au/SnO-SnO2 nanosheet based composite used for rapid detection of hydrogen sulphide.

In this work, a new type of H2S sensor was fabricated by means of drop-coating of an Au/SnO-SnO2 nanosheet material, which was prepared by a one-pot hydrothermal reaction, onto a gold electrode in an alumina ceramic tube with the formation of a thin nanocomposite film. The microstructure and morphology of the nanosheet composites were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). A gas-sensitivity study presented good H2S-sensing performance of such Au/SnO-SnO2 nanosheet composites. At an optimal operating temperature of 240 °C and ambient temperature of 25 °C, the resulting sensor showed a good linear response to H2S in a range of 1.0 to 100 ppm with a low detection limit of 0.7 ppm, and a very fast response-recovery time of 22 s for response and 63 s for recovery, respectively. The sensor was also unaffected by ambient humidity and had good reproducibility and selectivity. When being applied to the monitoring of H2S in an atmospheric environment in a pig farm, the response signal to H2S was only attenuated by 4.69% within 90 days, proving that the sensor had a long and stable service lifetime for continuous running and showing its important practical application prospects.

ZnO@CuO hollow nanosphere-based composites used for the sensitive detection of hydrogen sulfide with long-term stability.

In this study, zinc oxide@cupric oxide hollow nanospheres (ZnO@CuO HNS, 330 nm in diameter) were successfully prepared by a hard-template method using amino-phenolformaldehyde resin spheres (APF) as the templates. A new type of thin-film gas sensor toward hydrogen sulfide (H2S) was fabricated by means of drop-coating on the gold electrode of an alumina ceramic tube. The microstructure and morphology of the nanosphere composites were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and the gas-sensing performance of the composites toward the detection of H2S were investigated. The ZnO@CuO nanocomposite with a hollow structure exhibited good gas-sensing properties. Under the optimum operating temperature of 260 °C, ambient temperature of 30 °C, and ambient humidity of 70%, the linear response of the sensor to H2S was in the concentration range of 0.1-100 ppm, and its detection limit reached 0.0611 ppm, with a quick response time of 78 s. Also, the sensor possessed good repeatability, selectivity, and stability. The long-term stability and run duration of such sensors were pronounced, with only a 1.9% reduction in the signal after the continuous monitoring of H2S gas in a pig farm for 18 months using Alibaba's cloud remote transmission system, which presents an important practical application prospect in atmosphere environment monitoring on livestock-raising fields.

L-Histidine-DNA interaction: a strategy for the improvement of the fluorescence signal of poly(adenine) DNA-templated gold nanoclusters.

An interesting phenomenon is described that the fluorescence signal of poly(adenine) (A) DNA-templated gold nanoclusters (AuNCs) is greatly improved in the presence of L-histidine by means of L-histidine-DNA interaction. The modified nanoclusters display strong fluorescence emission with excitation/emission maxima at 290/475 nm. The fluorescence quantum yield (QY) is improved from 1.9 to 6.5%. Fluorescence enhancement is mainly ascribed to the L-histidine-DNA interaction leading to conformational changes of the poly(A) DNA template, which offer a better microenvironment to protect AuNCs. The assay enables L-histidine to be determined with good sensitivity and a linear response that covers the 1 to 50 nM L-histidine concentration range with a 0.3 nM limit of detection. The proposed method has been applied to the determination of imidazole-containing drugs in pharmaceutical samples. A turn-on fluorescent method has been designed for the sensitive detection of L-histidine as well as imidazole-containing drugs on the basis of the L-histidine-DNA interaction.

Simple and rapid mercury ion selective electrode based on 1-undecanethiol assembled Au substrate and its recognition mechanism.

A simple and rapid mercury ion selective electrode based on 1-undecanethiol (1-UDT) assembled Au substrate (Au/1-UDT) has been well constructed. 1-UDT was for the purpose of generating self-assembled monolayer on gold surface to recognize Hg2+ in aqueous solution, which had a working concentration range of 1.0×10-8-1.0×10-4molL-1, with a Nernst response slope of 28.83±0.4mV/-pC, a detection limit of 4.5×10-9molL-1, and a good selectivity over the other tested cations. Also, the Au/1-UDT possessed good reproducibility, stability, and short response time. The recovery obtained for the determination of mercury ion in practical tremella samples was in the range of 99.8-103.4%. Combined electrochemical analysis and X-ray photoelectron spectroscopy (XPS) with quantum chemical computation, the probable recognition mechanism of the electrode for selective recognition of Hg2+ has been investigated. The covalent bond formed between mercury and sulfur is stronger than the one between gold and sulfur and thus prevents the adsorption of 1-UDT molecules on the gold surface. The quantum chemical computation with density functional theory further demonstrates that the strong interaction between the mercury atom and the sulfur atom on the gold surface leads to the gold sulfur bond ruptured and the gold mercury metallophilic interaction.

Molecule counting with alkanethiol and DNA immobilized on gold microplates for extended gate FET.

Several molecule counting methods based on electrochemical characterization of alkanethiol and thiolated single-stranded oligonucleotide (HS-ssDNA) immobilized on gold microplates, which were used as extended gates of field effect transistors (FETs), have been investigated in this paper. The surface density of alkanethiol and DNA monolayers on gold microplates were quantitatively evaluated from the reductive desorption charge by using cyclic voltammetry (CV) and fast CV (FCV) methods in strong alkali solution. Typically, the surface density of 6-hydroxy-1-hexanethiol (6-HHT) was evaluated to be 4.639 molecules/nm(2), and the 28 base-pair dsDNA about 1.226-4.849 molecules/100 nm(2) on Au microplates after post-treatment with 6-HHT. The behaviors on surface potential and capacitance of different aminoalkanethiols on Au microplates were measured in 0.1 mol/L Na2SO4 and 10 mmol/L Tris-HCl (pH=7.4) solutions, indicating that the surface potential increases and the double-layer capacitance decreases with the length of carbon chain increased for the thiol monolayers, which obey a physics relationship for a capacitor. Comparably, a simple sensing method based on the electronic signals of biochemical reaction events on DNA immobilization and hybridization at the Au surface of the extended gate FET (EGFET) was developed, with which the surface density of the hybridized dsDNA on the gold surface of the EGFET was evaluated to be 1.36 molecules per 100 nm(2), showing that the EGFET is a promising sensing biochip for DNA molecule counting.

Approach on quantitative structure-activity relationship for design of a pH neutral carrier containing tertiary amino group.

The quantitative structure-activity relationship (QSAR) for neutral carriers used to prepare hydrogen ion sensors has been studied. A series of synthesized carrier compounds were taken as the training set. Five molecular structure parameters of the compounds were calculated by using CNDO/2 algorithm and used as feature variables in constructing QSAR model. The lower and upper limits of the linear pH response range were taken as the activity measure. The corresponding model equations were derived from the stepwise regression procedure. With the established QSAR model, a new pH carrier, (4-hydroxybenzyl) didodecylamine (XIII) was proposed and synthesized. The PVC membrane pH electrode based on carrier XIII with a wide pH linear response range of 2.0-12.5 was prepared. Having a theoretical Nernstian response slope of 57.2+/-0.3 mV/pH (n=5 at 25 degrees C) without a super-Nernstian phenomenon, the sensor had low resistance, short response time, high selectivity and good reproducibility. Moreover, the sensor was successfully applied to detecting the pH value of serum samples.