Recent advances in harnessing biological macromolecules for wound management: A review.

Wound dressings (WDs) are an essential component of wound management and serve as an artificial barrier to isolate the injured site from the external environment, thereby helping to prevent exogenous infections and supporting healing. However, maintaining a moist wound environment, providing protection from infection, good biocompatibility, and allowing for gas exchange, remain a challenge in device design. Functional wound dressings (FWDs) prepared from hybrid biological macromolecule-based materials can enhance efficacy of these systems for skin wound management. This review aims to provide an overview of the state-of-the-art FWDs within the field of wound management, with a specific focus on hybrid biomaterials, techniques, and applications developed over the past five years. In addition, we highlight the incorporation of biological macromolecules in WDs, the emergence of smart WDs, and discuss the existing challenges and future prospects for the development of advanced WDs.

Artificial heart valve reinforced with silk woven fabric and poly (ethylene glycol) diacrylate hydrogels composite.

The present study describes the preparation of woven silk fabric (WSF) and poly(ethylene glycol) diacrylate (PEGDA) hydrogel composite reinforced artificial heart valve (SPAHV). Interestingly, the longitudinal and latitudinal elastic modulus of the SPAHV composite can achieve at 54.08 ± 3.29 MPa and 23.96 ± 2.18 MPa, respectively, while its volume/mass swelling ratio and water permeability was 1.9 %/2.8 % and 3 mL/(cm2∙min), respectively, revealing remarkable anisotropic mechanical properties, low water swelling property and water permeability. The in vitro & in vivo biocompatibility and anti-calcification ability of SPAHV were further examined using L929 mouse fibroblasts and Sprague Dawley (SD) male rat model under 8 weeks of subcutaneous implantation. The expression of pro-inflammatory cytokine TNF-α and anti-inflammatory cytokine IL-10 was determined by immunohistochemical staining, as well as the H&E staining and alizarin red staining were accessed. The results showed that the composites possess better biocompatibility, resistance to degradation and anti-calcification ability compared to the control group (p < 0.05). Thus, the SPAHV composite with robust mechanical properties and biocompatibility has potential application for artificial heart valves.

Rapid Volumetric Bioprinting of Decellularized Extracellular Matrix Bioinks.

Decellularized extracellular matrix (dECM)-based hydrogels are widely applied to additive biomanufacturing strategies for relevant applications. The extracellular matrix components and growth factors of dECM play crucial roles in cell adhesion, growth, and differentiation. However, the generally poor mechanical properties and printability have remained as major limitations for dECM-based materials. In this study, heart-derived dECM (h-dECM) and meniscus-derived dECM (Ms-dECM) bioinks in their pristine, unmodified state supplemented with the photoinitiator system of tris(2,2-bipyridyl) dichlororuthenium(II) hexahydrate and sodium persulfate, demonstrate cytocompatibility with volumetric bioprinting processes. This recently developed bioprinting modality illuminates a dynamically evolving light pattern into a rotating volume of the bioink, and thus decouples the requirement of mechanical strengths of bioprinted hydrogel constructs with printability, allowing for the fabrication of sophisticated shapes and architectures with low-concentration dECM materials that set within tens of seconds. As exemplary applications, cardiac tissues are volumetrically bioprinted using the cardiomyocyte-laden h-dECM bioink showing favorable cell proliferation, expansion, spreading, biomarker expressions, and synchronized contractions; whereas the volumetrically bioprinted Ms-dECM meniscus structures embedded with human mesenchymal stem cells present appropriate chondrogenic differentiation outcomes. This study supplies expanded bioink libraries for volumetric bioprinting and broadens utilities of dECM toward tissue engineering and regenerative medicine.

Advances in volumetric bioprinting.

The three-dimensional (3D) bioprinting technologies are suitable for biomedical applications owing to their ability to manufacture complex and high-precision tissue constructs. However, the slow printing speed of current layer-by-layer (bio)printing modality is the major limitation in biofabrication field. To overcome this issue, volumetric bioprinting (VBP) is developed. VBP changes the layer-wise operation of conventional devices, permitting the creation of geometrically complex, centimeter-scale constructs in tens of seconds. VBP is the next step onward from sequential biofabrication methods, opening new avenues for fast additive manufacturing in the fields of tissue engineering, regenerative medicine, personalized drug testing, and soft robotics, etc. Therefore, this review introduces the printing principles and hardware designs of VBP-based techniques; then focuses on the recent advances in VBP-based (bio)inks and their biomedical applications. Lastly, the current limitations of VBP are discussed together with future direction of research.

Supercritical CO2-assisted fabrication of CM-PDA/SF/nHA nanofibrous scaffolds for bone regeneration and chemo-photothermal therapy against osteosarcoma.

Concurrent treatment of tumor recurrence and bone defects after surgical resection of osteosarcoma remains a clinical challenge. Combination therapy based on local drug delivery systems shows great promise in the treatment of osteosarcoma. In this study, curcumin modified polydopamine nanoparticle loaded silk fibroin doped with nano-hydroxyapatite (CM-PDA/SF/nHA) nanofibrous scaffolds were developed to induce bone defect regeneration and chemo-photothermal synergistic effects against osteosarcoma. These scaffolds exhibited good photothermal conversion efficiency and photostability. Moreover, the results of ALP staining and alizarin red S (ARS) staining indicated that the CM-PDA/SF/1%nHA scaffolds had the most obvious promotion effect on early osteogenic differentiation. The results of in vitro and in vivo anti-osteosarcoma activity showed that the CM-PDA/SF/1%nHA scaffolds exhibited higher anti-osteosarcoma activity compared to the control and SF scaffolds. In addition, the CM-PDA/SF/1%nHA scaffolds could promote the proliferation and differentiation of bone marrow mesenchymal stem cells in vitro and new bone production in vivo. Thus, these results suggested that the CM-PDA/SF/1%nHA scaffolds could improve bone defect regeneration and achieve chemo-photothermal synergistic effects against osteosarcoma.

Temperature-Promoted Giant Unilamellar Vesicle (GUV) Aggregation: A Way of Multicellular Formation.

The evolution of unicellular to multicellular life is considered to be an important step in the origin of life, and it is crucial to study the influence of environmental factors on this process through cell models in the laboratory. In this paper, we used giant unilamellar vesicles (GUVs) as a cell model to investigate the relationship between environmental temperature changes and the evolution of unicellular to multicellular life. The zeta potential of GUVs and the conformation of the headgroup of phospholipid molecules at different temperatures were examined using phase analysis light scattering (PALS) and attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), respectively. In addition, the effect of increasing temperature on the aggregation of GUVs was further investigated in ionic solutions, and the possible mechanisms involved were explored. The results showed that increasing temperature reduced the repulsive forces between cells models and promoted their aggregation. This study could effectively contribute to our understanding of the evolution of primitive unicellular to multicellular life.

Biomedical applications of magnetosomes: State of the art and perspectives.

Magnetosomes, synthesized by magnetotactic bacteria (MTB), have been used in nano- and biotechnological applications, owing to their unique properties such as superparamagnetism, uniform size distribution, excellent bioavailability, and easily modifiable functional groups. In this review, we first discuss the mechanisms of magnetosome formation and describe various modification methods. Subsequently, we focus on presenting the biomedical advancements of bacterial magnetosomes in biomedical imaging, drug delivery, anticancer therapy, biosensor. Finally, we discuss future applications and challenges. This review summarizes the application of magnetosomes in the biomedical field, highlighting the latest advancements and exploring the future development of magnetosomes.

Liquid-embedded (bio)printing of alginate-free, standalone, ultrafine, and ultrathin-walled cannular structures.

While there has been considerable success in the three-dimensional bioprinting of relatively large standalone filamentous tissues, the fabrication of solid fibers with ultrafine diameters or those cannular featuring ultrathin walls remains a particular challenge. Here, an enabling strategy for (bio)printing of solid and hollow fibers whose size ranges could be facilely adjusted across a broad spectrum, is reported, using an aqueous two-phase embedded (bio)printing approach combined with specially designed cross-linking and extrusion methods. The generation of standalone, alginate-free aqueous architectures using this aqueous two-phase strategy allowed freeform patterning of aqueous bioinks, such as those composed of gelatin methacryloyl, within the immiscible aqueous support bath of poly(ethylene oxide). Our (bio)printing strategy revealed the fabrication of standalone solid or cannular structures with diameters as small as approximately 3 or 40 µm, respectively, and wall thicknesses of hollow conduits down to as thin as <5 µm. With cellular functions also demonstrated, we anticipate the methodology to serve as a platform that may satisfy the needs for the different types of potential biomedical and other applications in the future, especially those pertaining to cannular tissues of ultrasmall diameters and ultrathin walls used toward regenerative medicine and tissue model engineering.

Volumetric additive manufacturing of pristine silk-based (bio)inks.

Volumetric additive manufacturing (VAM) enables fast photopolymerization of three-dimensional constructs by illuminating dynamically evolving light patterns in the entire build volume. However, the lack of bioinks suitable for VAM is a critical limitation. This study reports rapid volumetric (bio)printing of pristine, unmodified silk-based (silk sericin (SS) and silk fibroin (SF)) (bio)inks to form sophisticated shapes and architectures. Of interest, combined with post-fabrication processing, the (bio)printed SS constructs reveal properties including reversible as well as repeated shrinkage and expansion, or shape-memory; whereas the (bio)printed SF constructs exhibit tunable mechanical performances ranging from a few hundred Pa to hundreds of MPa. Both types of silk-based (bio)inks are cytocompatible. This work supplies expanded bioink libraries for VAM and provides a path forward for rapid volumetric manufacturing of silk constructs, towards broadened biomedical applications.

Erbium chloride silicate-based vertical cavity surface-emitting laser at the near-infrared communication band.

Silicon-based integrated optoelectronics has become a hotspot in the field of computers and information processing systems. An integrated coherent light source on-chip with a small footprint and high efficiency is one of the most important unresolved devices. Here, we realize a silicon-based vertical cavity surface-emitting laser in the near-infrared communication band by making efforts in both controlled preparation of high-gain erbium silicate materials and novel design of high optical feedback microcavity. Single-crystal erbium/ytterbium silicate microplates with erbium concentration as high as 5 × 1021 cm-3 are controlled prepared by a chemical vapor deposition method. They can produce strong luminescence with quite a long lifetime (2.3 ms) at the wavelength of 1.5 µm. By embedding the erbium silicate microplates between two dielectric Bragg reflectors, we construct a vertical cavity surface-emitting laser at 1.5 µm, with a lasing threshold as low as 20 µJ/cm2 and Q factor of nearly 2000. Our study provides a new pathway to achieve a sub-micrometer coherent light source for optical communication.

Multi-functional Calotropis gigantea fabric using self-assembly silk fibroin, chitosan and nano-silver microspheres with oxygen low-temperature plasma treatment.

The present paper describes a novel multi-functional Calotropis gigantea (CG) fabric with durable antibacterial property and comfortable wearability for various applications. First, antibacterial microspheres (AMs) were prepared by self-assembly of silk fibroin (SF), chitosan (CS) and nano-silver microspheres (NSMs). Oxygen low-temperature plasma (OLTP) treatment was used to improve the adhesion between AMs and CG yarn. The AMs modified CG fabric has soft hand feeling, high moisture regain (10.37 ± 1.87%), good breathability, strong wrinkle resistance, and durable antibacterial properties. The antibacterial rate of the modified CG fabric against Escherichia coli (E. Coil) and Staphylococcus aureus (S. Aureus) is as high as 99.9 ± 0.1%, and it still has an antibacterial activity after washing 20 times (90.24 ± 0.65% and 80.25 ± 1.14%, respectively). The in vivo biocompatibility test showed clear signs of angiogenesis at the implantation site in the rats. Thus, this study offers the foundation for the development of functional CG fiber-based biomedical textiles.

Sustainable Antibacterial and Anti-Inflammatory Silk Suture with Surface Modification of Combined-Therapy Drugs for Surgical Site Infection.

Silk sutures with antibacterial and anti-inflammatory functions were developed for sustained dual-drug delivery to prevent surgical site infections (SSIs). The silk sutures were prepared with core-shell structures braided from degummed silk filaments and then coated with a silk fibroin (SF) layer loaded with berberine (BB) and artemisinin (ART). Both the rapid release of drugs to prevent initial biofilm formation and the following sustained release to maintain effective concentrations for more than 42 days were demonstrated. In vitro assays using human fibroblasts (Hs 865.Sk) demonstrated cell proliferation on the materials, and hemolysis was 2.4 ± 0.8%, lower than that required by ISO 10993-4 standard. The sutures inhibited platelet adhesion and promoted collagen deposition and blood vessel formation. In vivo assessments using Sprague-Dawley (SD) rats indicated that the coating reduced the expression of pro-inflammatory cytokines interleukin-10 (IL-10) and tumor necrosis factor-α (TNF-α), shortening the inflammatory period and promoting angiogenesis. The results demonstrated that these new sutures exhibited stable structures, favorable biocompatibility, and sustainable antibacterial and anti-inflammatory functions with potential for surgical applications.

Identification and functional characterization of potential oncofetal targets in human hepatocellular carcinoma.

Here, we present a detailed protocol for the identification of potential oncofetal targets for hepatocellular carcinoma (HCC) patients through a hepatocyte differentiation model and a sorafenib refractory cell-line-derived xenograft model. We describe the procedures of tumor sphere formation, organoid generation, and subcutaneous tumor formation for functional studies. We then detail the procedures of immunohistochemistry and immunofluorescence for examination of changes in lineage-specific markers. Finally, we describe the development of antibody-based therapeutics targeting tumor lineage plasticity in HCC. For complete details on the use and execution of this protocol, please refer to Kong et al. (2021).1.

Vertical Extrusion Cryo(bio)printing for Anisotropic Tissue Manufacturing.

Due to the poor mechanical properties of many hydrogel bioinks, conventional 3D extrusion bioprinting is usually conducted based on the X-Y plane, where the deposited layers are stacked in the Z-direction with or without the support of prior layers. Herein, a technique is reported, taking advantage of a cryoprotective bioink to enable direct extrusion bioprinting in the vertical direction in the presence of cells, using a freezing plate with precise temperature control. Of interest, vertical 3D cryo-bioprinting concurrently allows the user to create freestanding filamentous constructs containing interconnected, anisotropic microchannels featuring gradient sizes aligned in the vertical direction, also associated with enhanced mechanical performances. Skeletal myoblasts within the 3D-cryo-bioprinted hydrogel constructs show enhanced cell viability, spreading, and alignment, compared to the same cells in the standard hydrogel constructs. This method is further extended to a multimaterial format, finding potential applications in interface tissue engineering, such as creation of the muscle-tendon unit and the muscle-microvascular unit. The unique vertical 3D cryo-bioprinting technique presented here suggests improvements in robustness and versatility to engineer certain tissue types especially those anisotropic in nature, and may extend broad utilities in tissue engineering, regenerative medicine, drug discovery, and personalized therapeutics.

Uniaxial and Coaxial Vertical Embedded Extrusion Bioprinting.

The 3D bioprinting technologies have attracted increasing attention due to their flexibility in producing architecturally relevant tissue constructs. Here, a vertical embedded extrusion bioprinting strategy using uniaxial or coaxial nozzles is presented, which allows formation of vertical structures of homogeneous or heterogeneous properties. By adjusting the bioprinting parameters, the characteristics of the bioprinted vertical patterns can be precisely controlled. Using this strategy, two proof-of-concept applications in tissue biofabrication are demonstrated. Specifically, intestinal villi and hair follicles, two liner-shaped tissues in the human body, are successfully generated with the vertical embedded bioprinting method, reconstructing some of their key structures as well as restoring partial functions in vitro. Caco-2 cells in the bioprinted intestinal villus constructs proliferated and aggregated properly, also showing functional biomarker expressions such as ZO-1 and villin. Moreover, preliminary hair follicle structures featuring keratinized human keratinocytes and spheroid-shaped human dermal papilla cells are formed after vertical bioprinting and culturing. In summary, this vertical embedded extrusion bioprinting technique harnessing a uniaxial or coaxial format will likely bring further improvements in the reconstruction of certain human tissues and organs, especially those with a linear structure, potentially leading to wide utilities in tissue engineering, tissue model engineering, and drug discovery.

Targeting tumor lineage plasticity in hepatocellular carcinoma using an anti-CLDN6 antibody-drug conjugate.

Tumor lineage plasticity is emerging as a critical mechanism of therapeutic resistance and tumor relapse. Highly plastic tumor cells can undergo phenotypic switching to a drug-tolerant state to avoid drug toxicity. Here, we investigate the transmembrane tight junction protein Claudin6 (CLDN6) as a therapeutic target related to lineage plasticity for hepatocellular carcinoma (HCC). CLDN6 was highly expressed in embryonic stem cells but markedly decreased in normal tissues. Reactivation of CLDN6 was frequently observed in HCC tumor tissues as well as in premalignant lesions. Functional assays indicated that CLDN6 is not only a tumor-associated antigen but also conferred strong oncogenic effects in HCC. Overexpression of CLDN6 induced phenotypic shift of HCC cells from hepatic lineage to biliary lineage, which was more refractory to sorafenib treatment. The enhanced tumor lineage plasticity and cellular identity change were potentially induced by the CLDN6/TJP2 (tight junction protein 2)/YAP1 (Yes-associated protein 1) interacting axis and further activation of the Hippo signaling pathway. A de novo anti-CLDN6 monoclonal antibody conjugated with cytotoxic agent (Mertansine) DM1 (CLDN6-DM1) was developed. Preclinical data on both HCC cell lines and primary tumors showed the potent antitumor efficiency of CLDN6-DM1 as a single agent or in combination with sorafenib in HCC treatment.

Micronized curcumin fabricated by supercritical CO2 to improve antibacterial activity against Pseudomonas aeruginosa.

Curcumin (CM) is a natural polyphenolic compound with multiple biomedical functions. However, clinical applications face more challenges due to its low dissolution rate and poor bioavailability. Micronization is an effective strategy to overcome these drawbacks. Herein, CM nanoparticles (CM NPs, ∼300 nm) were fabricated using solution enhanced dispersion by supercritical CO2 (SEDS). The solubility of CM NPs was remarkably enhanced. Aim to study the effects of micronization on the biological functions of CM, we investigated the antibacterial activity of original CM and CM NPs upon Pseudomonas aeruginosa. In vitro, the minimal inhibitory concentrations (MIC) assay, solid-medium spot assay, growth kinetics assay and morphologic observation using atomic force microscopy (AFM) confirmed that the anti-P. aeruginosa activity of CM NPs was enhanced compared to original CM. Moreover, CM NPs also showed stronger inhibition for adhesion and biofilm formation of P. aeruginosa compared to original CM. Experiments on mice infected with P. aeruginosa showed that CM NPs have a better therapeutic effect than the original CM in vivo. In summary, CM NPs may be a novel and promising therapeutic candidate for bacterial infection.

Sequential delivery of dual drugs with nanostructured lipid carriers for improving synergistic tumor treatment effect.

To improve synergistic anticancer efficacy and minimize the adverse effects of chemotherapeutic drugs, temozolomide (TMZ) and curcumin (CUR) co-loaded nanostructured lipid carriers (NLCs) were prepared by microemulsion in this study. And the physicochemical properties, drug release behavior, intracellular uptake efficiency, in vitro and in vivo anticancer effects of TMZ/CUR-NLCs were evaluated. TMZ/CUR-NLCs showed enhanced inhibitory effects on glioma cells compared to single drug loaded NLCs, which may be owing to that the quickly released CUR can sensitize the cancer cells to TMZ. The inhibitory mechanism is a combination of S phase cell cycle arrest associated with induced apoptosis. Notably, TMZ/CUR-NLCs can accumulate at brain and tumor sites effectively and perform a significant synergistic anticancer effect in vivo. More importantly, the toxic effects of TMZ/CUR-NLCs on major organs and normal cells at the same therapeutic dosage were not observed. In conclusion, NLCs are promising nanocarriers for delivering dual chemotherapeutic drugs sequentially, showing potentials in the synergistic treatment of tumors while reducing adverse effects both in vitro and in vivo.

Loading of metal isotope-containing intercalators for mass cytometry-based high-throughput quantitation of exosome uptake at the single-cell level.

Nanometer-sized exosomes are being widely studied as cell-to-cell communicators and versatile drug vehicles. Characterizations of the biodistribution of these exosomes are essential for the evaluation of their biological functions and drug delivery efficacy. However, current technologies for exosome tracking rely on fluorescence and have the disadvantages of being low throughput due to the limited number of available channels and spectral spillover. Here, we reported the development of an engineering approach that involves loading of metal isotope-containing intercalators into exosomes to quantify exosome uptake at the single-cell level. We demonstrate that mass cytometry in conjunction with highly multivariate cellular phenotyping enables high-throughput identification of the in vivo fate of exosomes. Inspired by these insights into cellular distribution, we optimized the administration methods for exosome-based drug delivery, verifying the anticancer efficacy of these exosomes in a mouse model of breast cancer. The evaluation of exosome's fate in vivo at the single-cell level provides valuable insights into the functions of exosomes in vivo and facilitates the improvement of exosome-based therapy.

High-throughput single-cell analysis of exosome mediated dual drug delivery, in vivo fate and synergistic tumor therapy.

Exosomes could serve as delivery platforms, owing to their good biocompatibility, stability, and long blood circulation time. Tracking the biological fate of exosomes in vivo is essential for evaluating their functions, delivery efficacy, and biosafety, and it is invaluable for guiding exosome-based therapy. Here, we merged a single-cell technique, mass cytometry, with in vivo uptake analysis to comprehensively reveal the fate of exosomes at the single-cell level. In tandem with multivariate cellular phenotyping, in vivo uptake of exosomes labeled with heavy metal-containing tags was quantified in a high-throughput manner. Interestingly, an organ-dependent uptake landscape of exosomes by diverse cell types was distinctly demonstrated, which implied that cancer cells seemed to preferably take up more released drugs from the exosomes. Using these cellular insights, the administration method of drug-loaded exosomes was optimized to elevate their accumulation in tumor sites and minimize their spread into healthy organs. Dual drug-loaded exosomes were locally administered and superior synergistic tumor treatment effects were achieved in a solid tumor model. The disclosure of exosome cellular distribution, together with the successful engineering of exosomes with multiple anticancer capacities, provides a new level of insight into optimizing and enhancing exosome-based drug delivery and synergistic tumor therapy.