AlGaAs soliton microcombs at room temperature.

Soliton mode locking in high-Q microcavities provides a way to integrate frequency comb systems. Among material platforms, AlGaAs has one of the largest optical nonlinearity coefficients, and is advantageous for low-pump-threshold comb generation. However, AlGaAs also has a very large thermo-optic effect that destabilizes soliton formation, and femtosecond soliton pulse generation has only been possible at cryogenic temperatures. Here, soliton generation in AlGaAs microresonators at room temperature is reported for the first time, to the best of our knowledge. The destabilizing thermo-optic effect is shown to instead provide stability in the high-repetition-rate soliton regime (corresponding to a large, normalized second-order dispersion parameter D2/κ). Single soliton and soliton crystal generation with sub-milliwatt optical pump power are demonstrated. The generality of this approach is verified in a high-Q silica microtoroid where manual tuning into the soliton regime is demonstrated. Besides the advantages of large optical nonlinearity, these AlGaAs devices are natural candidates for integration with semiconductor pump lasers. Furthermore, the approach should generalize to any high-Q resonator material platform.

Harnessing microcomb-based parallel chaos for random number generation and optical decision making.

Optical chaos is vital for various applications such as private communication, encryption, anti-interference sensing, and reinforcement learning. Chaotic microcombs have emerged as promising sources for generating massive optical chaos. However, their inter-channel correlation behavior remains elusive, limiting their potential for on-chip parallel chaotic systems with high throughput. In this study, we present massively parallel chaos based on chaotic microcombs and high-nonlinearity AlGaAsOI platforms. We demonstrate the feasibility of generating parallel chaotic signals with inter-channel correlation <0.04 and a high random number generation rate of 3.84 Tbps. We further show the application of our approach by demonstrating a 15-channel integrated random bit generator with a 20 Gbps channel rate using silicon photonic chips. Additionally, we achieved a scalable decision-making accelerator for up to 256-armed bandit problems. Our work opens new possibilities for chaos-based information processing systems using integrated photonics, and potentially can revolutionize the current architecture of communication, sensing and computations.

Quantum decoherence of dark pulses in optical microresonators.

Quantum fluctuations disrupt the cyclic motions of dissipative Kerr solitons (DKSs) in nonlinear optical microresonators and consequently cause timing jitter of the emitted pulse trains. This problem is translated to the performance of several applications that employ DKSs as compact frequency comb sources. Recently, device manufacturing and noise reduction technologies have advanced to unveil the quantum properties of DKSs. Here we investigate the quantum decoherence of DKSs existing in normal-dispersion microresonators known as dark pulses. By virtue of the very large material nonlinearity, we directly observe the quantum decoherence of dark pulses in an AlGaAs-on-insulator microresonator, and the underlying dynamical processes are resolved by injecting stochastic photons into the microresonators. Moreover, phase correlation measurements show that the uniformity of comb spacing of quantum-limited dark pulses is better than 1.2 × 10-16 and 2.5 × 10-13 when normalized to the optical carrier frequencies and repetition frequencies, respectively. Comparing DKSs generated in different material platforms explicitly confirms the advantages of dark pulses over bright solitons in terms of quantum-limited coherence. Our work establishes a critical performance assessment of DKSs, providing guidelines for coherence engineering of chip-scale optical frequency combs.

Microcomb-based integrated photonic processing unit.

The emergence of parallel convolution-operation technology has substantially powered the complexity and functionality of optical neural networks (ONN) by harnessing the dimension of optical wavelength. However, this advanced architecture faces remarkable challenges in high-level integration and on-chip operation. In this work, convolution based on time-wavelength plane stretching approach is implemented on a microcomb-driven chip-based photonic processing unit (PPU). To support the operation of this processing unit, we develop a dedicated control and operation protocol, leading to a record high weight precision of 9 bits. Moreover, the compact architecture and high data loading speed enable a preeminent photonic-core compute density of over 1 trillion of operations per second per square millimeter (TOPS mm-2). Two proof-of-concept experiments are demonstrated, including image edge detection and handwritten digit recognition, showing comparable processing capability compared to that of a digital computer. Due to the advanced performance and the great scalability, this parallel photonic processing unit can potentially revolutionize sophisticated artificial intelligence tasks including autonomous driving, video action recognition and image reconstruction.

Mesenchymal Stem Cell-derived Exosomes Affect Macrophage Phenotype: A Cell-free Strategy for the Treatment of Skeletal Muscle Disorders.

The process of tissue damage, repair, and regeneration in the skeletal muscle system involves complex inflammatory processes. Factors released in the inflammatory microenvironment can affect the phenotypic changes of macrophages, thereby changing the inflammatory process, making macrophages an important target for tissue repair treatment. Mesenchymal stem cells exert anti-inflammatory effects by regulating immune cells. In particular, exosomes secreted by mesenchymal stem cells have become a new cell-free treatment strategy due to their low tumorigenicity and immunogenicity. This article focuses on the mechanism of the effect of exosomes derived from mesenchymal stem cells on the phenotype of macrophages after skeletal muscle system injury and explores the possible mechanism of macrophages as potential therapeutic targets after tissue injury.

Probing material absorption and optical nonlinearity of integrated photonic materials.

Optical microresonators with high quality (Q) factors are essential to a wide range of integrated photonic devices. Steady efforts have been directed towards increasing microresonator Q factors across a variety of platforms. With success in reducing microfabrication process-related optical loss as a limitation of Q, the ultimate attainable Q, as determined solely by the constituent microresonator material absorption, has come into focus. Here, we report measurements of the material-limited Q factors in several photonic material platforms. High-Q microresonators are fabricated from thin films of SiO2, Si3N4, Al0.2Ga0.8As, and Ta2O5. By using cavity-enhanced photothermal spectroscopy, the material-limited Q is determined. The method simultaneously measures the Kerr nonlinearity in each material and reveals how material nonlinearity and ultimate Q vary in a complementary fashion across photonic materials. Besides guiding microresonator design and material development in four material platforms, the results help establish performance limits in future photonic integrated systems.

Microcomb-driven silicon photonic systems.

Microcombs have sparked a surge of applications over the past decade, ranging from optical communications to metrology1-4. Despite their diverse deployment, most microcomb-based systems rely on a large amount of bulky elements and equipment to fulfil their desired functions, which is complicated, expensive and power consuming. By contrast, foundry-based silicon photonics (SiPh) has had remarkable success in providing versatile functionality in a scalable and low-cost manner5-7, but its available chip-based light sources lack the capacity for parallelization, which limits the scope of SiPh applications. Here we combine these two technologies by using a power-efficient and operationally simple aluminium-gallium-arsenide-on-insulator microcomb source to drive complementary metal-oxide-semiconductor SiPh engines. We present two important chip-scale photonic systems for optical data transmission and microwave photonics, respectively. A microcomb-based integrated photonic data link is demonstrated, based on a pulse-amplitude four-level modulation scheme with a two-terabit-per-second aggregate rate, and a highly reconfigurable microwave photonic filter with a high level of integration is constructed using a time-stretch approach. Such synergy of a microcomb and SiPh integrated components is an essential step towards the next generation of fully integrated photonic systems.

High-performance lasers for fully integrated silicon nitride photonics.

Silicon nitride (SiN) waveguides with ultra-low optical loss enable integrated photonic applications including low noise, narrow linewidth lasers, chip-scale nonlinear photonics, and microwave photonics. Lasers are key components to SiN photonic integrated circuits (PICs), but are difficult to fully integrate with low-index SiN waveguides due to their large mismatch with the high-index III-V gain materials. The recent demonstration of multilayer heterogeneous integration provides a practical solution and enabled the first-generation of lasers fully integrated with SiN waveguides. However, a laser with high device yield and high output power at telecommunication wavelengths, where photonics applications are clustered, is still missing, hindered by large mode transition loss, non-optimized cavity design, and a complicated fabrication process. Here, we report high-performance lasers on SiN with tens of milliwatts output power through the SiN waveguide and sub-kHz fundamental linewidth, addressing all the aforementioned issues. We also show Hertz-level fundamental linewidth lasers are achievable with the developed integration techniques. These lasers, together with high-Q SiN resonators, mark a milestone towards a fully integrated low-noise silicon nitride photonics platform. This laser should find potential applications in LIDAR, microwave photonics and coherent optical communications.

Laser soliton microcombs heterogeneously integrated on silicon.

Silicon photonics enables wafer-scale integration of optical functionalities on chip. Silicon-based laser frequency combs can provide integrated sources of mutually coherent laser lines for terabit-per-second transceivers, parallel coherent light detection and ranging, or photonics-assisted signal processing. We report heterogeneously integrated laser soliton microcombs combining both indium phospide/silicon (InP/Si) semiconductor lasers and ultralow-loss silicon nitride (Si3N4) microresonators on a monolithic silicon substrate. Thousands of devices can be produced from a single wafer by using complementary metal-oxide-semiconductor-compatible techniques. With on-chip electrical control of the laser-microresonator relative optical phase, these devices can output single-soliton microcombs with a 100-gigahertz repetition rate. Furthermore, we observe laser frequency noise reduction due to self-injection locking of the InP/Si laser to the Si3N4 microresonator. Our approach provides a route for large-volume, low-cost manufacturing of narrow-linewidth, chip-based frequency combs for next-generation high-capacity transceivers, data centers, space and mobile platforms.

Ultrahigh-Q AlGaAs-on-insulator microresonators for integrated nonlinear photonics.

Aluminum gallium arsenide (AlGaAs) and related III-V semiconductors have excellent optoelectronic properties. They also possess strong material nonlinearity as well as high refractive indices. In view of these properties, AlGaAs is a promising candidate for integrated photonics, including both linear and nonlinear devices, passive and active devices, and associated applications. Low propagation loss is essential for integrated photonics, particularly in nonlinear applications. However, achieving low-loss and high-confinement AlGaAs photonic integrated circuits poses a challenge. Here we show an effective reduction of surface-roughness-induced scattering loss in fully etched high-confinement AlGaAs-on-insulator nanowaveguides by using a heterogeneous wafer-bonding approach and optimizing fabrication techniques. We demonstrate ultrahigh-quality AlGaAs microring resonators and realize quality factors up to 3.52 × 106 and finesses as high as 1.4 × 104. We also show ultra-efficient frequency comb generations in those resonators and achieve record-low threshold powers on the order of ∼20 µW and ∼120 µW for the resonators with 1 THz and 90 GHz free-spectral ranges, respectively. Our result paves the way for the implementation of AlGaAs as a novel integrated material platform specifically for nonlinear photonics and opens a new window for chip-based efficiency-demanding practical applications.

On-chip high-efficiency wavelength multicasting of PAM3/PAM4 signals using low-loss AlGaAs-on-insulator nanowaveguides.

Nonlinear optics-based optical signal processing (OSP) could potentially increase network flexibility because of its transparency, tunability, and large bandwidth. A low-loss, high nonlinearity, and compact integrated material platform is always the pursuit of OSP. In this Letter, a high-efficiency, one-to-six wavelength multicasting of 10 Gbaud pulse-amplitude modulation (PAM3/PAM4) signals using a 6 cm long Al0.2Ga0.8As-on-insulator nanowaveguide is experimentally demonstrated for the first time, to the best of our knowledge. The low-loss, combined with the high nonlinear coefficient of the AlGaAsOI platform, enables us to achieve -11.2dB average conversion efficiency clear eye diagrams and <2.1dB power penalty at KP4-forward error correction threshold (2.4×10-4) for all the output PAM3/PAM4 multicasting channels. This result points to a new generation of nonlinear OSP photonic integrated circuits.

Strong hyperbolic-magnetic polaritons coupling in an hBN/Ag-grating heterostructure.

Strong coupling between hyperbolic phonon-polaritons (HP) and magnetic polaritons (MP) is theoretically studied in a hexagonal boron nitride (hBN) covered deep silver grating structure. It is found that MP in grating trenches strongly interacts with HP in an anisotropic hBN thin film, leading to a large Rabi splitting with near-perfect dual band light absorption. Numerical results indicate that MP-HP coupling can be tuned by geometric parameters of the structure. More intriguingly, the resonantly enhanced fields for two branches of the hybrid mode demonstrate unusually different field patterns. One exhibits a volume-confined Zigzag propagation pattern in the hBN film, while the other shows a field-localization near the grating corners. Furthermore, resonance frequencies of these strongly coupled modes are very robust over a wide-angle range. The angle-insensitive strong interaction of hyperbolic-magnetic polaritons with dual band intense light absorption in this hybrid system offers a new paradigm for the development of various optical detecting, sensing and thermal emitting devices.

Integrated turnkey soliton microcombs.

Optical frequency combs have a wide range of applications in science and technology1. An important development for miniature and integrated comb systems is the formation of dissipative Kerr solitons in coherently pumped high-quality-factor optical microresonators2-9. Such soliton microcombs10 have been applied to spectroscopy11-13, the search for exoplanets14,15, optical frequency synthesis16, time keeping17 and other areas10. In addition, the recent integration of microresonators with lasers has revealed the viability of fully chip-based soliton microcombs18,19. However, the operation of microcombs requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components, and microcombs operating at rates that are compatible with electronic circuits-as is required in nearly all comb systems-have not yet been integrated with pump lasers because of their high power requirements. Here we experimentally demonstrate and theoretically describe a turnkey operation regime for soliton microcombs co-integrated with a pump laser. We show the appearance of an operating point at which solitons are immediately generated by turning the pump laser on, thereby eliminating the need for photonic and electronic control circuitry. These features are combined with high-quality-factor Si3N4 resonators to provide microcombs with repetition frequencies as low as 15 gigahertz that are fully integrated into an industry standard (butterfly) package, thereby offering compelling advantages for high-volume production.

Ultra-efficient frequency comb generation in AlGaAs-on-insulator microresonators.

Recent advances in nonlinear optics have revolutionized integrated photonics, providing on-chip solutions to a wide range of new applications. Currently, state of the art integrated nonlinear photonic devices are mainly based on dielectric material platforms, such as Si3N4 and SiO2. While semiconductor materials feature much higher nonlinear coefficients and convenience in active integration, they have suffered from high waveguide losses that prevent the realization of efficient nonlinear processes on-chip. Here, we challenge this status quo and demonstrate a low loss AlGaAs-on-insulator platform with anomalous dispersion and quality (Q) factors beyond 1.5 × 106. Such a high quality factor, combined with high nonlinear coefficient and small mode volume, enabled us to demonstrate a Kerr frequency comb threshold of only ∼36 µW in a resonator with a 1 THz free spectral range, ∼100 times lower compared to that in previous semiconductor platforms. Moreover, combs with broad spans (>250 nm) have been generated with a pump power of ∼300 µW, which is lower than the threshold power of state-of the-art dielectric micro combs. A soliton-step transition has also been observed for the first time in an AlGaAs resonator.

Strong coupling of optical interface modes in a 1D topological photonic crystal heterostructure/Ag hybrid system.

We theoretically investigate the strong coupling of a topological photonic state (TPS) and Tamm plasmon polaritons (TPPs) in a graphene embedded one-dimensional topological photonic crystal (TPC)/Ag structure in visible range. It is shown that the strong interaction of a TPS at the TPC heterointerface and TPP at the Ag surface enables a large Rabi splitting up to 96.8 meV with a dual-narrow-band perfect absorption. A spectral linewidth of the hybrid mode can be 0.3 nm with a Q factor of 1078. The numerical results also reveal that mode coupling can be either tuned by adjusting the geometric parameters or actively controlled by the incident angle, offering a remarkable polarization-independent strong light-matter interaction. The coupled mode theory is employed to explain the strong TPS-TPP coupling. The polarization-independent and controllable strong mode coupling with a dual-narrow-band perfect absorption in this simple lamellar geometry offers new possibilities for developing various on-chip optical detection, sensing, filtering, and light-emitting devices.

Light Confinement Effect Induced Highly Sensitive, Self-Driven Near-Infrared Photodetector and Image Sensor Based on Multilayer PdSe2 /Pyramid Si Heterojunction.

In this study, a highly sensitive and self-driven near-infrared (NIR) light photodetector based on PdSe2 /pyramid Si heterojunction arrays, which are fabricated through simple selenization of predeposited Pd nanofilm on black Si, is demonstrated. The as-fabricated hybrid device exhibits excellent photoresponse performance in terms of a large on/off ratio of 1.6 × 105 , a responsivity of 456 mA W-1 , and a high specific detectivity of up to 9.97 × 1013 Jones under 980 nm illumination at zero bias. Such a relatively high sensitivity can be ascribed to the light trapping effect of the pyramid microstructure, which is confirmed by numerical modeling based on finite-difference time domain. On the other hand, thanks to the broad optical absorption properties of PdSe2 , the as-fabricated device also exhibits obvious sensitivity to other NIR illuminations with wavelengths of 1300, 1550, and 1650 nm, which is beyond the photoresponse range of Si-based devices. It is also found that the PdSe2 /pyramid Si heterojunction device can also function as an NIR light sensor, which can readily record both "tree" and "house" images produced by 980 and 1300 nm illumination, respectively.

Low loss (Al)GaAs on an insulator waveguide platform.

In this Letter, we demonstrate a low loss gallium arsenide and aluminum gallium arsenide on an insulator platform by heterogenous integration. The resonators on this platform exhibit record high quality factors up to 1.5×106, corresponding to a propagation loss ∼0.4 dB/cm. For the first time, to the best of our knowledge, the loss of integrated III-V semiconductor on insulator waveguides becomes comparable with that of the silicon-on-insulator waveguides. This Letter should have a significant impact on photonic integrated circuits (PICs) and become an essential building block for the evolving nonlinear PICs and integrated quantum photonic systems in the future.

Strong longitudinal coupling of Tamm plasmon polaritons in graphene/DBR/Ag hybrid structure.

In this paper, strong longitudinal coupling of the Tamm plasmon polaritons (TPPs) is investigated in a graphene/DBR/Ag slab hybrid system. It is found that TPPs can be excited at both the top graphene and the bottom silver slab interface, which can strongly interact with each other in this coupled structure. Numerical simulation results demonstrate that the vertical Tamm plasmon coupling can be either tuned by adjusting the geometric parameters or actively controlled by the Fermi energy in graphene sheet as well as the incident angle of light, allowing for strong light-matter interaction with a tunable dual-band perfect absorption. Moreover, the coupling strength of the hybrid modes exhibits a large tuning range, from a large Rabi splitting to an extremely narrow induced transparency in this coupled regime. Coupled mode theory has been employed to explain the strong coupling phenomenon. The controllable TPP coupling with an ultrahigh dual-band absorption capability offered by this simple layered structure opens new avenues for developing a broad range of graphene-based active optoelectronic and polaritonic devices.

Heterogeneous silicon photonics sensing for autonomous cars.

Heterogeneous silicon photonics is uniquely positioned to address the photonic sensing needs of upcoming autonomous cars and provide the necessary cost reduction for widespread deployment. This is because it allows for wafer-scale active/passive integration, including optical sources. We present our recent research and the development of interferometric optical gyroscopes and LiDAR sensors. More specifically, we show a fully integrated gyroscope front-end occupying an area of only 4.5 mm2. We also show the first dense pitch optical phased array using heterogeneous phase shifters. The 4 µm pitch heterogeneous phase shifters provide very low V2π of only 0.35-1.4 V across 200 nm, low residual amplitude modulation of only 0.1-0.15 dB for 2π phase shift, extremely low static power consumption (<3 nW), and high speed (> 1 GHz). All of these factors make them ideal for next-generation LiDAR systems that employ optical phased arrays.