RESUMEN
In the current study, NiO nanoparticles, MnO nanoparticles, and Mn2NiO4 nanocomposites (Ni-NPs, Mn-NPs and MN-NCs, respectively) were synthesized using a facile hydrothermal method, and their performance in the removal of amaranth (AM) dye from synthetic wastewater was compared. XRD, FTIR spectroscopy, SEM, BET analysis, and TGA were performed to characterize the produced catalysts. The effect of pertinent parameters, including pH, dosage of catalysts, temperature, and shaking speed on the uptake of AM was investigated through batch experiments. The MN-NCs showed ultrafast and high efficiency for AM removal compared to their counter parts Mn-NPs and Ni-NPs. Under ideal conditions, the highest adsorption efficiencies of AM onto Ni-NPs, Mn-NPs, and MN-NCs were calculated to be 80.50%, 93.85%, and 98.50%, respectively. The Langmuir isotherm fitted the experimental data of AM removal better as shown by the higher values of r 2, compared to the Freundlich isotherm, indicating monolayer type adsorption of AM. According to kinetic analyses, the adsorption of AM was best described by the pseudo-second-order kinetic model. Further, regeneration/recycling studies showed that MN-NCs retained 79% adsorption efficiency after four cycles. DFT experiments were also conducted to gain a deeper understanding of the process and behavior of AM adsorption. In conclusion, as Ni-NPs, Mn-NPs, and MN-NCs adsorb AM predominantly via electrostatic interaction, they can be applied for the removal of both cationic and anionic dyes by controlling the pH factor.
RESUMEN
Bicontinuous porous materials, which possess 3D interconnected network and pore channels facilitating the mass diffusion to the interior of materials, have demonstrated their promising potentials in a large variety of research fields. However, facile construction of such complex and delicate structures is still challenging. Here, an amine-mediated polymerization-induced fusion assembly strategy is reported for synthesizing polyphenol-based bicontinuous porous spheres with various pore structures. Specifically, the fusion of pore-generating template observed by TEM promotes the development of bicontinuous porous networks that are confirmed by 3D reconstruction. Furthermore, the resultant bicontinuous porous carbon particles after pyrolysis, with a diameter of ≈600 nm, a high accessible surface area of 359 m2 g-1, and a large pore size of 40-150 nm manifest enhanced performance toward the catalytic degradation of sulfamethazine in water decontamination. The present study expands the toolbox of interfacial tension-solvent-dependent porous spheres while providing new insight into their structure-property relationships.
RESUMEN
Metal oxides-modified biochars have been widely studied as promising adsorbents for removing phosphate from wastewater discharge. Yet, the low adsorption selectivity towards phosphate severely limits its potential in practical applications. In this study, MgO-modified biochar modified by hydroxyl and amino groups (OH/NH2@MBC) is developed for selective phosphorus recovery from wastewater. As major results, the OH/NH2@MBC exhibits favorable phosphate adsorption performance is superior to that of MBC resin in the presence of co-existing anions (NO3-, Cl-, HCO3- and SO42-) and natural organic matter (humic acid) even actual wastewater, suggesting its superior selectivity towards phosphate. The OH/NH2@MBC shows an excellent phosphate adsorption capacity (43.27 mg/g) and desorption ratio (82.34 %) after five cycles under the condition of anion coexistence (100 mg/L). The experimental and DFT theoretical study reveals that attaching hydroxyl and amino groups onto the MBC surface, which facilitates to inhibiting the side effects of anions (NO3-, Cl-, HCO3-, and SO42-) through Lewis acid-base sites, hydrogen bonds, and metal affinity, and preferentially select adsorption P, contributing greatly to improve phosphate adsorption selectivity. Importantly, the presence of amino and hydroxyl groups can reduce the Fermi level of OH/NH2@MgO(220) and OH/NH2@MgO(200) and improve the adsorption selection for HPO42-. This study provides an effective strategy for enhancing the adsorption selectivity of metal oxides-modified biochars towards phosphate through modifying functional groups.
RESUMEN
Single atoms catalysts (SACs) have promising development in electrocatalytic energy conversion. Nevertheless, rational design SACs with reversible oxygen electrocatalysis still remain challenge. Herein, we synthesized atomically dispersed Zn with N defect on three-dimensional (3D) biomimetic carbon nanotubes by secondary pyrolysis (Zn-N-C-2), which possesses excellent oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) bifunctional catalytic activities. The biomimetic 3D structure and unique "leaf-branch" system are beneficial to fully expose the active sites. Density functional theory (DFT) calculations show that Zn-N3-D can optimize the charge distribution and facilitate electron transfer step of OH*âO*. Zn-N-C-2 exhibits higher ORR activity than commercial Pt/C with a half-wave potential (E1/2) of 0.85 V and OER overpotential of 450 mV at 10 mA cm-2. After being assembled into the air cathode of aqueous Zn-air battery (ZAB), it demonstrates superior performances with long-term charge and discharge for more than 200 h. This work not only clarifies the controlled synthesis of N-defects Zn SACs with excellent bifunctional electrocatalyst, but also provide in-depth understanding of structural-performance relationships by regulating local microenvironments.