RESUMEN
Disruptions of key food and fertilizer exports from Russia and Ukraine have exposed many countries to challenges accessing some commodities since these countries' war began. We evaluated the short-term, external, and direct impacts of disruptions of six food commodities and three types of fertilizer supplies from Russia and Ukraine on food access for all trading partners of the two countries by applying a set of trade and socioeconomic indicators. We found that the external food supplies of 279 countries and territories were affected to varying degrees; 24 countries-especially Georgia, Armenia, Kazakhstan, Azerbaijan, and Mongolia-are extremely vulnerable because they depend almost entirely on a variety of food imports from Russia and Ukraine. Access to fertilizers was affected in 136 countries and territories, particularly Estonia (potassic fertilizer), Mongolia (nitrogenous fertilizers), Kazakhstan (mixed fertilizers), and Brazil, the United States, China, and India (all types of fertilizers). An integrated assessment of countries' import types, purchasing power parity per capita, and populations indicated that the Democratic Republic of the Congo, Ethiopia, Egypt, and Pakistan are most vulnerable to such supply disruptions. Development of research into diversification and decentralization strategies for food access is needed to guide stable food supply policies.
Asunto(s)
Fertilizantes , Abastecimiento de Alimentos , Ucrania , Federación de Rusia , Georgia (República) , ArmeniaRESUMEN
Indium has emerged as a strategic metal for high-tech and renewable industries, being catalogued as a critical material to foster a greener future. Nevertheless, its global sustainability is not well addressed. Here, using dynamic substance flow analysis, we study the indium industry evolution between 2010 and 2020 and estimate its future demand in the medium and long term toward 2050 to identify potential paths and mechanisms to decrease indium losses and to identify the key stages in its life cycle. As electronics and photovoltaic industries will play a crucial role in the indium demand, we assess their indium demand employing three cumulative photovoltaic capacity scenarios (8.5, 14, and 60 TW by 2050) with different dominant photovoltaic sub-technologies. Results show that liquid-crystal displays and photovoltaic panels will drive indium future demand, increasing its current demand by 2.2-4.2, 2.6-7.0, and 6.8-38.3 times for the 8.5, 14, and 60 TW scenarios, respectively, threatening with shortages that could occur as early as the next decade. Therefore, measures to reduce losses in primary production, innovations and improvements in electronics and solar panels, and indium recycling with an effective circular economy strategy could promote and secure the future sustainability of indium.
Asunto(s)
Indio , Tecnología , Indio/química , Energía Renovable , Reciclaje , IndustriasRESUMEN
Solid waste generation has been significantly accelerated by the rapid growth of economy and population worldwide. The traditional waste management focusing on waste utilization and disposal is unable to unravel the continuous depletion of finite natural resources. "Zero waste" as an integrated waste management method to promote waste reduction through a pack of strategies such as cleaner production and green consumption has emerged. Here, we systematically reviewed the researches on zero waste from a scientometric perspective, and visually unveiled the most productive countries, evolution process, main authors, major research areas, and documents of zero waste research domain. The results show that with increased publications, zero waste has become a multidisciplinary study area and food waste reduction is the biggest sub-network in zero waste research. The current research frontiers are mainly regarding "lean production," "consumer behavior," "productivity." Accordingly, this study proposed a pathway for realizing zero waste cities with three lanes: (1) research and development, (2) management method, and (3) policy and implementation. The findings are also expected to be beneficial to latecomer researches in the waste management field.
Asunto(s)
Eliminación de Residuos , Administración de Residuos , Ciudades , Alimentos , Eliminación de Residuos/métodos , Residuos Sólidos/análisis , Administración de Residuos/métodosRESUMEN
Objective@#To investigate the age related changes in cervical range of motion (CROM) and its relationship with cervical spondylosis in school students aged 12-18 in Nanyang City, to provide reference for prevention, early diagnosis and treatment evaluation of cervical spondylosis.@*Methods@#Stratified sampling was adopted in 13 counties and districts of Nanyang City and 890 students aged 12-18 were assessed for CROM using the Coda Motion Analyzer. SPSS 19.0 was used to data analyze.@*Results@#A decreasing trend was observed in CROM among boys and girls aged 12-18 years in Nanyang. For boys aged 15 and 18 years old, higher anterior flexion ( t =2.02, 2.70), posterior extension ( t =2.01, 2.81), left flexion ( t =3.51, 2.99), right flexion ( t =5.07, 2.66), sinistral ( t =2.28, 2.92) and dextral ( t =2.91,3.60) were found compared with younger age groups ( P <0.05). Similar findings were found in girls aged 15 and 18-years old [anterior flexion ( t =2.38, 2.20), posterior extension ( t =2.09,2.02), left flexion ( t =2.33, 2.55), right flexion ( t =7.34, 4.60), sinistral ( t =3.73, 2.35) and dextral ( t =2.31, 3.99, P <0.05). Except for the right flexion, the CROM of boys in was higher than that of girls at the same age group. The prevalence of cervical spondylosis showed an increasing trend (boys: χ 2 trend =13.93, girls: χ 2 trend =12.87, P <0.05). Except for 14-year-old group, the prevalence of cervical spondylosis in girls was higher than that in boys, with significant differences observed in 15 and 17-year-old groups ( χ 2=10.35, 9.64, P <0.05).@*Conclusion@#With the increase of age, the CROM of male and female students shows a downward trend in general. The prevalence of cervical spondylosis increases with the decrease of CROM. CROM measurement is conducive to the prevention, early diagnosis and treatment of juvenile cervical spondylosis.
RESUMEN
INTRODUCTION: This study aimed to investigate the somatotype and obesity of adults in the Xinjiang Uygur Autonomous Region of China and to explore multivariate path analysis for the feasibility and scientificity of using somatotypes to evaluate obesity. SUBJECTS AND METHODS: According to anthropometric methods, a cross-sectional study was performed on 10 indexes of 3438 adults (1690 men and 1748 women, aged > 20 years) living in the Xinjiang Uygur Autonomous Region of China (including Kazakh, Kyrgyz, Xibe, Uzbek, Tatar and Tajik). The Heath-Carter anthropometric method and body mass index (BMI) were used to evaluate somatotype and obesity, respectively. The feasibility and scientificity of using somatotypes to evaluate obesity were analysed by correspondence analysis. RESULTS: Among the six populations, the somatotypes were mainly distributed as endomorphic mesomorph, mesomorph-endomorph and mesomorphic endomorph populations, accounting for 66.5% of males and 78.8% of females. The obesity rate (27.4% in males, 27.8% in females) of the six populations in the Xinjiang Uygur Autonomous Region of China was much higher than the average Chinese adult obesity rate (12.1%) and the global adult obesity rate (male: 11%, female: 15%). The distribution of BMI was significantly different (male: P=0.000, female: P=0.033) in different populations, and the incidence of overweight and obesity in the Xinjiang Uygur Autonomous Region of China increased gradually. This study found that there were significant differences in somatotype distribution among different obesity groups in the Xinjiang Uygur Autonomous Region of China (P=0.000). There was a strong correlation between overweight or obesity and endomorph-mesomorph, endomorphic mesomorph and mesomorphic endomorph. Furthermore, this study indicated that using somatotypes to evaluate obesity was reliable and scientific. CONCLUSION: This study concluded that the somatotype of overweight or obese people was mainly related to endomorphic mesomorph, mesomorph-endomorph, and mesomorphic endomorph.
RESUMEN
The Multi-constellation Global Navigation Satellite System (Multi-GNSS) has become the standard implementation of high accuracy positioning and navigation applications. It is well known that the noise of code and phase measurements depend on GNSS constellation. Then, Helmert variance component estimation (HVCE) is usually used to adjust the contributions of different GNSS constellations by determining their individual variances of unit weight. However, HVCE requires a heavy computation load. In this study, the HVCE posterior weighting was employed to carry out a kinematic relative Multi-GNSS positioning experiment with six short-baselines from day of year (DoY) 171 to 200 in 2019. As a result, the HVCE posterior weighting strategy improved Multi-GNSS positioning accuracy by 20.5%, 15.7% and 13.2% in east-north-up (ENU) components, compared to an elevation-dependent (ED) priori weighting strategy. We observed that the weight proportion of both code and phase observations for each GNSS constellation were consistent during the entire 30 days, which indicates that the weight proportions of both code and phase observations are stable over a long period of time. It was also found that the quality of a phase observation is almost equivalent in each baseline and GNSS constellation, whereas that of a code observation is different. In order to reduce the time consumption of the HVCE method without sacrificing positioning accuracy, the stable variances of unit weights of both phase and code observations obtained over 30 days were averaged and then frozen as a priori information in the positioning experiment. The result demonstrated similar ENU improvements of 20.0%, 14.1% and 11.1% with respect to the ED method but saving 88% of the computation time of the HCVE strategy. Our study concludes with the observations that the frozen variances of unit weight (FVUW) could be applied to the positioning experiment for the next 30 days, that is, from DoY 201 to 230 in 2019, improving the positioning ENU accuracy of the ED method by 18.1%, 13.2% and 10.6%, indicating the effectiveness of the FVUW.
RESUMEN
Since Bevis first proposed Global Positioning System (GPS) meteorology in 1992, the precipitable water (PW) estimates retrieved from Global Navigation Satellite System (GNSS) networks with high accuracy have been widely used in many meteorological applications. The proper estimation of GNSS PW can be affected by the GNSS processing strategy as well as the local geographical properties of GNSS sites. To better understand the impact of these factors, we compare PW estimates from two nearby permanent GPS stations (THTI and FAA1) in the tropical Tahiti Island, a basalt shield volcano located in the South Pacific, with a mean slope of 8% and a diameter of 30 km. The altitude difference between the two stations is 86.14 m, and their horizontal distance difference is 2.56 km. In this paper, Bernese GNSS Software Version 5.2 with precise point positioning (PPP) and Vienna mapping function 1 (VMF1) was applied to estimate the zenith tropospheric delay (ZTD), which was compared with the International GNSS Service (IGS) Final products. The meteorological parameters sourced from the European Center for Medium-Range Weather Forecasts (ECMWF) and the local weighted mean temperature ( T m ) model were used to estimate the GPS PW for three years (May 2016 to April 2019). The results show that the differences of PW between two nearby GPS stations is nearly a constant with value 1.73 mm. In our case, this difference is mainly driven by insolation differences, the difference in altitude and the wind being only second factors.
RESUMEN
Recycling of some minor but essential scarce metals used in vehicles may serve as an important strategy to strengthen sustainable management of natural resources. Accordingly, this study focused on five precious metals (PMs): Au, Ag, Pt, Pd, and Rh, in both end-of-life conventional and next-generation vehicles. To explore their recycling potentials in Japan, we developed substance flow and scenario analyses based on estimations of PM contents per end-of-life vehicle (ELV) and ELV generations. The study predicts that in Japan, from 2015 to 2040, the content of PMs per ELV will range from 2 to 6 g, and the annual amount of PMs in ELVs will remain largely stable, at 14-15 t, but the proportions of PMs utilized in different vehicles, parts, and components will gradually change; in particular, increased proportions will occur in the printed wiring boards (PWBs) of next-generation vehicles. The results also show that, in Japan, totals of 33-53% of PMs in ELVs were recycled in 2015, and that by selective dismantling of PWBs and heating wires in the rear windows of ELVs, the recycling potentials of PMs could be optimally increased to a maximum of 62-83% by 2040.
Asunto(s)
Administración de Residuos , Japón , Metales , ReciclajeRESUMEN
The Han Chinese people are the main ethnic group in China and the largest ethnic group in the world. The dimensions of the hands and feet have been successfully used for the estimation of stature. A total of 26,927 healthy adult subjects, comprising 13,221 men and 13,706 women, were recruited. The survey samples were chosen through random cluster sampling. The mean values were significantly higher in men than those in women for all measurements (P<0.001). All the measurements showed a statistically significant correlation with stature (P<0.01). The combination of the right hand length and the right foot length was the best predictor of stature because it had the lowest standard error of estimate. The use of multiple regression equations yielded better results than did the use of linear regression equations. The accuracy of stature prediction ranged from ±4.81 to ±6.39 cm. The present study was of great importance with regards to improving the physical anthropology database of ethnic groups in China.
Asunto(s)
Antropometría/métodos , Estatura , Pie/anatomía & histología , Mano/anatomía & histología , Adulto , Factores de Edad , Anciano , Algoritmos , China , Femenino , Geografía , Humanos , Masculino , Persona de Mediana Edad , Análisis de Regresión , Reproducibilidad de los Resultados , Factores Sexuales , Adulto JovenAsunto(s)
Estatura/genética , Estatura/fisiología , Dieta , Ambiente , Adulto , Factores de Edad , Anciano , Anciano de 80 o más Años , Pueblo Asiatico/genética , China , Femenino , Genética de Población , Geografía , Humanos , Masculino , Persona de Mediana Edad , Población Rural/estadística & datos numéricos , Población Urbana/estadística & datos numéricos , Adulto JovenRESUMEN
Burned bones have their unique characteristics in investigation of fire disaster/crimes, airplane disaster, explosion and other accidents. To study the morphological changes of skeletal tissue and DNA changes at different incinerating temperature might provide precise standard means to determine genera, sex, and age. Genetic locus was also applied in the above fields. The techniques to extract and detect of DNA in burning bones have been improved in recent years. In this article investigation advancement of analysis of burned bones with the morphology, histology, and molecular biology as well as the latest methods and techniques were reviewed. These results provide a new approach for further research and practice in forensic medicine.