RESUMEN
The interlayer strategy has emerged as an effective approach for modulating the interfacial polymerization process and improving the permeability and selectivity of polyamide membranes. However, the underlying mechanisms by which charged interlayers influence the interfacial polymerization process remain inadequately understood. In this study, we utilized two distinct charged cellulose nanofibers, namely, carboxylated cellulose (â-CNF) and quaternized cellulose ([Formula: see text]-CNF), as interlayers to regulate the interfacial polymerization process. Through simulation results, isothermal titration calorimetry (ITC) and UV tests, we demonstrated that the [Formula: see text]-CNF interlayer, which possesses stronger hydration capability and better piperazine affinity, enhanced the diffusion of piperazine across the reaction interface compared with the â-CNF interlayer. This led to an acceleration of the interfacial polymerization process and the formation of a denser membrane structure. Further investigation revealed that the charged interlayers significantly influenced the surface charging properties of the resulting nanofiltration membranes within a 30 nm range of electrostatic effects. Specifically, the â-CNF interlayer conferred a higher negative charge to the membrane surface, while the [Formula: see text]-CNF interlayer endowed the membranes with a lower surface negative charge. Leveraging these differences, the â-i-TFC membranes exhibited exceptional separation performance for divalent anions, achieving a SO42-/Cl- selectivity of 136. Conversely, the [Formula: see text]-i-TFC membrane demonstrated an enhanced separation of divalent cations, displaying a Mg2+/Na+ selectivity of 3.5. This study lays the groundwork for regulating the surface charging properties of polyamide membranes, offering potential advancements in nanofiltration applications.
RESUMEN
Porous substrates act as open "interfacial reactors" during the synthesis of polyamide composite membranes via interfacial polymerization. However, achieving a thin and dense polyamide nanofilm with high permeance and selectivity is challenging when using a conventional substrate with uniform wettability. To overcome this limitation, we propose the use of Janus porous substrates as confined interfacial reactors to decouple the local monomer concentration from the total monomer amount during interfacial polymerization. By manipulating the location of the hydrophilic/hydrophobic interface in a Janus porous substrate, we can precisely control the monomer solution confined within the hydrophilic layer without compromising its concentration. The hydrophilic surface ensures the uniform distribution of monomers, preventing the formation of defects. By employing Janus substrates fabricated through single-sided deposition of polydopamine/polyethyleneimine, we significantly reduce the thickness of the polyamide nanofilms from 88.4 to 3.8 nm by decreasing the thickness of the hydrophilic layer. This reduction leads to a remarkable enhancement in water permeance from 7.2 to 52.0 l/m2·h·bar while still maintaining ~96% Na2SO4 rejection. The overall performance of this membrane surpasses that of most reported membranes, including state-of-the-art commercial products. The presented strategy is both simple and effective, bringing ultrapermeable polyamide nanofilms one step closer to practical separation applications.
RESUMEN
Segmentation of bladder tumors from medical radiographic images is of great significance for early detection, diagnosis and prognosis evaluation of bladder cancer. Deep Convolution Neural Networks (DCNNs) have been successfully used for bladder tumor segmentation, but the segmentation based on DCNN is data-hungry for model training and ignores clinical knowledge. From the clinical view, bladder tumors originate from the mucosal surface of bladder and must rely on the bladder wall to survive and grow. This clinical knowledge of tumor location is helpful to improve the bladder tumor segmentation. To achieve this, we propose a novel bladder tumor segmentation method, which incorporates the clinical logic rules of bladder tumor and bladder wall into DCNNs to harness the tumor segmentation. Clinical logical rules provide a semantic and human-readable knowledge representation and are easy for knowledge acquisition from clinicians. In addition, incorporating logical rules of clinical knowledge helps to reduce the data dependency of the segmentation network, and enables precise segmentation results even with limited number of annotated images. Experiments on bladder MR images collected from the collaborating hospital validate the effectiveness of the proposed bladder tumor segmentation method.
Asunto(s)
Redes Neurales de la Computación , Neoplasias de la Vejiga Urinaria , Neoplasias de la Vejiga Urinaria/diagnóstico por imagen , Humanos , Imagen por Resonancia Magnética/métodos , Interpretación de Imagen Asistida por Computador/métodos , Aprendizaje ProfundoRESUMEN
Designing nanocomposite hydrogels with oriented nanosheets has emerged as a promising toolkit to achieve preferential performances that go beyond their disordered counterparts. Although current fabrication strategies via electric/magnetic force fields have made remarkable achievements, they necessitate special properties of nanosheets and suffer from an inferior orientation degree of nanosheets. Herein, a facile and universal approach is discovered to elaborate MXene-based nanocomposite hydrogels with highly oriented, heterogeneous architecture by virtue of supergravity to replace conventional force fields. The key to such architecture is to leverage bidirectional, force-tunable attributes of supergravity containing coupled orthogonal shear and centrifugal force field for steering high-efficient movement, pre-orientation, and stacking of MXene nanosheets in the bottom. Such a synergetic effect allows for yielding heterogeneous nanocomposite hydrogels with a high-orientation MXene-rich layer (orientation degree, f = 0.83) and a polymer-rich layer. The authors demonstrate that MXene-based nanocomposite hydrogels leverage their high-orientation, heterogeneous architecture to deliver an extraordinary electromagnetic interference shielding effectiveness of 55.2 dB at 12.4 GHz yet using a super-low MXene of 0.3 wt%, surpassing most hydrogels-based electromagnetic shielding materials. This versatile supergravity-steered strategy can be further extended to arbitrary nanosheets including MoS2, GO, and C3N4, offering a paradigm in the development of oriented nanocomposites.
RESUMEN
Fine design of surface charge properties of polyamide membranes is crucial for selective ionic and molecular sieving. Traditional membranes face limitations due to their inherent negative charge and limited charge modification range. Herein, we report a facile ionic liquid-decoupled bulk/interfacial diffusion strategy to elaborate the double charge flips of polyamide membranes, enabling on-demand transformation from inherently negative to highly positive and near-neutral charges. The key to these flips lies in the meticulous utilization of ionic liquid that decouples intertwined bulk/interfacial diffusion, enhancing interfacial while inhibiting bulk diffusion. These charge-tunable polyamide membranes can be customized for impressive separation performance, for example, profound Cl-/SO42- selectivity above 470 in sulfate recovery, ultrahigh Li+/Mg2+ selectivity up to 68 in lithium extraction, and effective divalent ion removal in pharmaceutical purification, surpassing many reported polyamide nanofiltration membranes. This advancement adds a new dimension to in the design of advanced polymer membranes via interfacial polymerization.
RESUMEN
Previous research investigating the correlation between prenatal exposure to per- and polyfluoroalkyl substances (PFAS) and subsequent blood pressure (BP) in offspring has yielded limited and contradictory findings. This study was conducted to investigate the potential relationship between maternal PFAS levels during pregnancy and subsequent BP in early childhood. A total of 129 expectant mothers from the Shanghai Birth Cohort were included in the study. Using high-performance liquid chromatography/tandem mass spectrometry, we measured ten PFAS compounds in maternal plasma throughout the pregnancy. When the children reached the age of 4, we examined their systolic BP (SBP) and diastolic BP (DBP), along with mean arterial pressure (MAP) and pulse pressure (PP). Data interpretation employed multiple linear and logistic regression models, complemented by Bayesian kernel machine regression (BKMR).We found that the majority of PFAS concentrations remained stable during pregnancy. The linear and BKMR models indicated a positive relationship between the PFAS mixture in maternal plasma and offspring's DBP and MAP, with perfluorohexanesulphonic acid (PFHxS) having the most significant influence (PFHxS and DBP [first trimester:ß=3.03, 95%CI: (1.01,5.05); second trimester: ß=2.35, 95%CI: (0.94,3.75); third trimester: ß=2.57, 95%CI:(0.80,4.34)]; MAP [first trimester:ß=2.55, 95%CI: (0.64,4.45); second trimester: ß=2.28, 95%CI: (0.95,3.61); third trimester: ß=2.35, 95%CI:(0.68,4.01)]). Logistic regression highlighted an increased risk of prehypertension and hypertension in offspring with higher maternal PFHxS concentrations during all three trimesters [first trimester: OR=2.53, 95%CI:(1.11,5.79), second trimester: OR=2.05, 95%CI:(1.11,3.78), third trimester: OR=3.08, 95%CI:(1.40,6.79)]. A positive correlation was identified between the half-lives of PFAS and the odds ratio (OR) of prehypertension and hypertension in childhood (ß=0.139, P=0.010). In conclusion, this research found maternal plasma PFAS concentrations to be positively associated with BP in offspring, with PFHxS showing the most significant influence. This correlation remained consistent throughout pregnancy, and this effect was proportional to the half-lives of PFAS.
Asunto(s)
Ácidos Alcanesulfónicos , Contaminantes Ambientales , Fluorocarburos , Hipertensión , Prehipertensión , Niño , Embarazo , Femenino , Humanos , Preescolar , Presión Sanguínea , Prehipertensión/inducido químicamente , Teorema de Bayes , Contaminantes Ambientales/toxicidad , Fluorocarburos/toxicidad , China , Hipertensión/inducido químicamente , Ácidos Alcanesulfónicos/toxicidadRESUMEN
Salt scaling poses a significant obstacle to the practical implementation of solar-driven evaporation for desalination. Attempts to mitigate scaling by enhancing mass transfer often lead to a compromise in evaporation efficiency due to associated heat loss. In the present work, a novel seesaw evaporator with a Janus structure to harness scaling for periodic self-descaling is reported. The seesaw evaporators are facilely fabricated by delignifying balsa wood and subsequently single-sided spray-coating it with soot and polydimethylsiloxane (PDMS). This unique Janus structure enables the evaporator to float on the brine while ensuring an ample supply of solution for evaporation. During evaporation, salt ions are transported directionally toward the cocked end of the evaporator to form scaling, triggering the seesaw evaporator to flip once a threshold is reached. The accumulated salts re-dissolve back into the solution. By adjusting the tilt angle, the evaporator can achieve an impressive evaporation rate of up to 2.65 kg m-2 h-1 when evaporating an 8 wt.% NaCl solution. Remarkably, these evaporators maintain a stable evaporation rate during prolonged 120 h operation and produce ≈3.93-6.35 L mâ»2·day⻹ of freshwater from simulated brines when assembled into an evaporation device.
RESUMEN
Supported ionic liquid membranes (SILMs), owing to their capacities in harnessing physicochemical properties of ionic liquid for exceptional CO2 solubility, have emerged as a promising platform for CO2 extraction. Despite great achievements, existing SILMs suffer from poor structural and performance stability under high-pressure or long-term operations, significantly limiting their applications. Herein, a one-step and in situ interfacial polymerization strategy is proposed to elaborate a thin, mechanically-robust, and highly-permeable polyamide armor on the SILMs to effectively protect ionic liquid within porous supports, allowing for intensifying the overall stability of SILMs without compromising CO2 separation performance. The armored SILMs have a profound increase of breakthrough pressure by 105% compared to conventional counterparts without armor, and display high and stable operating pressure exceeding that of most SILMs previously reported. It is further demonstrated that the armored SILMs exhibit ultrahigh ideal CO2/N2 selectivity of about 200 and excellent CO2 permeation of 78 barrers upon over 150 h operation, as opposed to the full failure of CO2 separation performance within 36 h using conventional SILMs. The design concept of armor provides a flexible and additional dimension in developing high-performance and durable SILMs, pushing the practical application of ionic liquids in separation processes.
RESUMEN
The spontaneous emulsification for the formation of water-in-oil (W/O) or oil-in-water (O/W) emulsions needs the help of at least one kind of the third component (surfactant or cosolvent) to stabilize the oil-water interface. Herein, with the water/CS2-soluble polymer poly(N,N-diethylacrylamide) (PDEAM) as a surfactant, the spontaneous formation of water-in-PDEAM/CS2 emulsions is reported for the first time. The strong affinity between PDEAM and water or the increase of PDEAM concentration will accelerate the emulsification process with high dispersed phase content. It is demonstrated that the spontaneous emulsification of condensed water droplets into the PDEAM/CS2 solution occurs during the breath figure process, resulting in porous films with two levels of pore sizes (i.e., micron and submicron). The emulsification degree and the amounts of submicron-sized pores increase with PDEAM concentration and solidifying time of the solution. This work brings about incremental interest in spontaneous emulsification that may happen during the breath figure process. The combination of these two simultaneous processes provides us with an option to build hierarchically porous structures with condensed and emulsified water droplets as templates. Such porous membranes may have great potential in fields such as separation, cell culture, and biosensing.
RESUMEN
It is particularly essential to analyze the complex crosslinked networks within polyamide membranes and their correlation with separation efficiency for the insightful tailoring of desalination membranes. However, using the degree of network crosslinking as a descriptor yields abnormal analytical outcomes and limited correlation with desalination performance due to imperfections in segmentation and calculation methods. Herein, we introduce a more rational parameter, denoted as harmonic amide bond density (HABD), to unravel the relationship between the crosslinked networks of polyamide membranes and their desalination performance. HABD quantifies the number of distinct amide bonds per unit mass of polyamide, based on a comprehensive segmentation of polyamide structure and consistent computational protocols derived from X-ray photoelectron spectroscopy data. Compared to its counterpart, HABD overcomes the limitations and offers a more accurate depiction of the crosslinked networks. Empirical data validate that HABD exhibits the expected correlation with the salt rejection and water permeance of reverse osmosis and nanofiltration polyamide membranes. Notably, HABD is applicable for analyzing complex crosslinked polyamide networks formed by highly functional monomers. By offering a powerful toolbox for systematic analysis of crosslinked polyamide networks, HABD facilitates the development of permselective membranes with enhanced performance in desalination applications.
RESUMEN
In this paper, we present a gradient porous hollow fiber structure integrated the signal transduction within a microspace, serving as a platform for cellular metabolism monitoring. We developed a nonenzymatic electrochemical electrode by coupling carbon nanotubes (CNT) and metal organic frameworks (MOF) nanozyme on three-dimensional (3D) gradient porous hollow fiber membrane (GPF) for in-situ detection of cell released hydrogen peroxide (H2O2). The GPF was used as a substrate for cell culture as well as the supporting matrix of the working electrode. The ultrasonically coupled CNT@MOF composite was immobilized on the outer surface of the GPF by means of pressure filtration. Notably, the MOF, acting as a peroxidase mimic, exhibits superior stability compared to traditional horseradish peroxidase. The incorporation of CNT not only provided sufficient specific surface area to improve the uniform distribution of MOF nanozyme, but also formed 3D conductive network. This network efficiently facilitates the electrons transfer during the catalytic process of the MOF, addressing the inherent poor conductivity of MOFs. The GPF-CNT@MOF nonenzymatic bioelectrode demonstrated excellent electrocatalytic performance including rapid response, satisfactory sensing selectivity, and attractive stability, which enabled the development of a robust in-situ cellular metabolic monitoring platform.
Asunto(s)
Estructuras Metalorgánicas , Nanotubos de Carbono , Estructuras Metalorgánicas/química , Nanotubos de Carbono/química , Peróxido de Hidrógeno/química , Porosidad , Peroxidasa , Técnicas Electroquímicas/métodosRESUMEN
Vinylene-linked two-dimensional polymers (V-2DPs) and their layer-stacked covalent organic frameworks (V-2D COFs) featuring high in-plane π-conjugation and robust frameworks have emerged as promising candidates for energy-related applications. However, current synthetic approaches are restricted to producing V-2D COF powders that lack processability, impeding their integration into devices, particularly within membrane technologies reliant upon thin films. Herein, we report the novel on-water surface synthesis of vinylene-linked cationic 2DPs films (V-C2DP-1 and V-C2DP-2) via Knoevenagel polycondensation, which serve as the anion-selective electrode coating for highly-reversible and durable zinc-based dual-ion batteries (ZDIBs). Model reactions and theoretical modeling revealed the enhanced reactivity and reversibility of the Knoevenagel reaction on the water surface. On this basis, we demonstrated the on-water surface 2D polycondensation towards V-C2DPs films that show large lateral size, tunable thickness, and high chemical stability. Representatively, V-C2DP-1 presents as a fully crystalline and face-on oriented film with in-plane lattice parameters of a=b≈43.3â Å. Profiting from its well-defined cationic sites, oriented 1D channels, and stable frameworks, V-C2DP-1 film possesses superior bis(trifluoromethanesulfonyl)imide anion (TFSI-)-transport selectivity (transference, t_=0.85) for graphite cathode in high-voltage ZDIBs, thus triggering additional TFSI--intercalation stage and promoting its specific capacity (from ~83 to 124â mAh g-1) and cycling life (>1000â cycles, 95 % capacity retention).
RESUMEN
Soft ionic conductors have emerged as a powerful toolkit to engineer transparent flexible intelligent devices that go beyond their conventional counterparts. Particularly, due to their superior capacities of eliminating the evaporation, freezing and leakage issues of the liquid phase encountered with hydrogels, organohydrogels and ionogels, the emerging solid-state, liquid-free ion-conducting elastomers have been largely recognized as ideal candidates for intelligent flexible devices. However, despite their extensive development, a comprehensive and timely review in this emerging field is lacking, particularly from the perspective of design principles, advanced manufacturing, and distinctive applications. Herein, we present (1) the design principles and intriguing merits of solid-state, liquid-free ion-conducting elastomers; (2) the methods to manufacture solid-state, liquid-free ion-conducting elastomers with preferential architectures and functions using advanced technologies such as 3D printing; (3) how to leverage solid-state, liquid-free ion-conducting elastomers in exploiting advanced applications, especially in the fields of flexible wearable sensors, bioelectronics and energy harvesting; (4) what are the unsolved scientific and technical challenges and future opportunities in this multidisciplinary field. We envision that this review will provide a paradigm shift to trigger insightful thinking and innovation in the development of intelligent flexible devices and beyond.
RESUMEN
Extracting lithium from seawater has emerged as a disruptive platform to resolve the issue of an ever-growing lithium shortage. However, achieving highly efficient and durable lithium extraction from seawater in an energy-efficient manner is challenging, as imposed by the low concentration of lithium ions (Li+) and high concentration of interfering ions in seawater. Here, we report a facile and universal strategy to develop photothermal "ion pumps" (PIPs) that allow achieving energy-efficient, augmented, and durable lithium extraction from seawater under sunlight. The key design of PIPs lies in the function fusion and spatial configuration manipulation of a hydrophilic Li+-trapping nanofibrous core and a hydrophobic photothermal shell for governing gravity-driven water flow and solar-driven water evaporation. Such a synergetic effect allows PIPs to achieve spontaneous, continuous, and augmented Li+ replenishment-diffusion-enrichment, as well as circumvent the impact of concentration polarization and scaling of interfering ions. We demonstrate that our PIPs exhibit dramatic enhancement in Li+ trapping rate and outstanding Li+ separation factor yet have ultralow energy consumption. Moreover, our PIPs deliver ultrastable Li+ trapping performance without scaling even under high-concentration interfering ions for 140 h operation, as opposed to the significant decrease of nearly 55.6% in conventional photothermal configuration. The design concept and material toolkit developed in this work can also find applications in extracting high-value-added resources from seawater and beyond.
RESUMEN
We present a novel approach to fabricate endogenous slippery lubricant-infused porous surfaces (eSLIPS) at room temperature using an evaporation-induced phase separation process. The ternary coating system, comprising ethylene-propylene copolymer, caprylyl methicone, and n-hexane, forms a porous structure in situ infiltrated with lubricant, resulting in surfaces with remarkable anti-fouling and anti-icing properties.
RESUMEN
Background: Primary Sjogren's syndrome (PSS) is a prevalent systemic autoimmune disease. However, the current gold standard diagnostic method is invasive, increasing the difficulty of patient acceptance and then delaying treatment. Therefore, a non-invasive, convenient, and effective diagnostic method is required. Although salivary gland ultrasonography (SGUS) is a good choice, previous studies have not found suitable parameters to diagnose PSS. Salivary gland involvement in patients with PSS leads to changes in gland stiffness and vascularization, so we combined sound touch elastography (STE) and ultra-microangiography (UMA) to demonstrate the diagnostic effectiveness of ultrasonography in PSS. Methods: This prospective study included 27 patients with PSS and 20 healthy controls, with all participants forming a random series. Major salivary glands were examined with UMA and STE. Color pixel percentage (CPP), shear wave velocity (SWV), and Young's modulus values were investigated, and the combination of these parameters was evaluated by logistic regression analysis. Results: For Young's modulus and SWV in the elasticity index, combined evaluation of both parotid glands and submandibular glands yielded an area under the receiver operating characteristic (ROC) curve (AUC) and confidence interval (CI) of 0.819, 0.699-0.938 and 0.801, 0.677-0.925, respectively. The levels of CPP in the parotid glands were significantly elevated (P<0.003) among patients compared to those in the control group, whereas the CPP values in the submandibular glands were not statistically different (P>0.086). We evaluated the elasticity values of the total 4 glands and the CPP of parotid glands together by logistic regression modeling. The ROC curve yielded an AUC of 0.954 (95% CI: specificity 0.849-0.994) which showed the best accuracy, with 92.6% sensitivity and 85.0% specificity. Conclusions: The use of STE and UMA to examine the salivary glands may aid in the diagnosis of PSS, and their combination may be a promising method. This is good news for patients with PSS who are not suitable or unwilling to undergo labial gland biopsy.
RESUMEN
Interfacial polymerization is a well-known process to synthesize separation layers for thin film composite membranes at an immiscible organic liquid-aqueous liquid interface. The organic-aqueous interface determines the diffusion dynamics of monomers and the chemical environment for polymerization, exerting a critical influence on the formation of polymer thin films. This review summarizes recent advances in tailoring interfacial polymerization using interfaces beyond the conventional alkane-water interface to achieve high-performance separation films with designed structures. Diverse liquid-liquid interfaces are introduced for synthesizing separation films by adding co-solvents into the organic phase and/or the aqueous phase, respectively, or by replacing one of the liquid phases with other solvents. Innovative liquid-gel and liquid-gas interfaces are then summarized for the synthesis of polymer thin films for separation. Novel strategies to form reaction interfaces, such as spray-coating, are also presented and discussed. In addition, we discuss the details of how a physically or chemically patterned substrate affects interfacial polymerization. Finally, the potential of unconventional interfaces in interfacial polymerization is forecast with both challenges and opportunities.
RESUMEN
BACKGROUND: Humans are widely exposed to perfluoroalkyl substances (PFAS), which have been found to be associated with various adverse birth outcomes. As blood pressure (BP) is an important parameter reflecting cardiovascular health in early life, it is necessary to investigate the association of PFAS exposure during early lifetime and BP in childhood. Therefore, we investigated the potential association between PFAS levels in umbilical cord blood and BP of the offspring at 4 years of age in a prospective cohort study. METHODS: PFAS in umbilical cord blood samples after birth were measured with high-performance liquid chromatography/tandem mass spectrometry in the Shanghai Birth Cohort. BP was measured at 4 years of age in the offspring. Multiple linear regression model was used to investigate the association between individual PFAS level and BP of the offspring. Bayesian kernel machine regression (BKMR) was used to analyze the relationship between the PFAS mixture and BP of the offspring, while weighted quantile sum (WQS) regression was utilized for sensitivity analysis. RESULTS: A total of 129 mother-child pairs were included in our analysis. In multiple linear regressions, we observed that long-chain PFAS, mainly including perfluorooctane sulfonate (PFOS), perfluorodecanoic acid (PFDA) and perfluoroundecanoic acid (PFUA), was negatively associated with systolic blood pressure (SBP), diastolic blood pressure (DBP) and mean arterial blood pressure (MAP). BKMR showed that an increase in umbilical cord blood PFAS mixture levels was significantly associated with a decrease in SBP, DBP and MAP [Estimated differences (SD): -0.433 (0.161); -0.437 (0.176); -0.382 (0.179), respectively]. The most important component in the association with SBP, DBP, and MAP was PFUA. PFDoA was found to be positively associated with SBP, DBP and MAP in both models. Sensitivity analysis with WQS regression showed consistent results. CONCLUSION: Our findings suggested that umbilical blood PFAS exposure was negatively associated with BP in offspring at 4 years of age, including SBP, DBP, and MAP.
Asunto(s)
Ácidos Alcanesulfónicos , Contaminantes Ambientales , Fluorocarburos , Humanos , Presión Sanguínea , Estudios Prospectivos , Sangre Fetal , Teorema de Bayes , China/epidemiologíaRESUMEN
The application of high-strength steel plates can reduce ship weight, and the saddle plate is one of the most common types of double-curved hull plates. To fill the research gap regarding high-strength steel saddle plates, two prediction models are established here to predict deformation in saddle plate forming. Deflection is a key parameter reflecting the overall deformation of a curved plate. Therefore, first of all, the influencing factors of the line heating of high-strength steel saddle plates were analyzed. The influence of plate geometric parameters and forming parameters on deflection was researched. Second, a multiple linear regression model between deflection and the geometric parameters and forming parameters of high-strength steel saddle plates was established. Finally, to solve the problem of a large error in the multivariate regression model for extrapolation, an intelligent prediction program for deflection based on a support vector machine (SVM) was developed using the Python language. The results show that the error of the multiple regression model was less than 5% for data interpolation. The error of the intelligent prediction model for deflection was less than 5% for data extrapolation. This research can provide data support for the automatic forming of marine saddle plates.
RESUMEN
Directional sweat-wicking by Janus fabrics has gained substantial attention in promoting personal wet-thermal management for optimal human comfort. During intense physical exercise, excessive sweating can cause the flooding of fabrics and weaken their wicking capabilities once the inner capillary channels are saturated. To address this issue, we develop a photothermal Janus fabric through a facile polydopamine (PDA) deposition followed by single-sided spray-coating of hydrophobic polydimethylsiloxane (PDMS). Such innovative fabrics enable directional sweat-wicking through a Janus structure and persistent removal of excessive sweat by solar-powered evaporation. Under sunlight, our photothermal Janus fabrics exhibit an enhanced evaporation rate, approximately twice compared with that of conventional Janus fabrics (â¼1.143 ± 0.027 kg m-2h-1), making them suitable for high sweating rates during vigorous exercise. Furthermore, these fabrics help to maintain the skin temperature within the normal range, preventing hypothermia caused by profuse sweating. In addition, our photothermal Janus fabrics exhibit excellent washing durability even after multiple washing cycles, ensuring prolonged performance and safety.