A chromosome-scale assembly of Brassica carinata (BBCC) accession HC20 containing resistance to multiple pathogens and an early generation assessment of introgressions into B. juncea (AABB).

Brassica carinata (BBCC) commonly referred to as Ethiopian mustard is a natural allotetraploid containing the genomes of Brassica nigra (BB) and Brassica oleracea (CC). It is an oilseed crop endemic to the northeastern regions of Africa. Although it is under limited cultivation, B. carinata is valuable as it is resistant/highly tolerant to most of the pathogens affecting widely cultivated Brassica species of the U's triangle. We report a chromosome-scale genome assembly of B. carinata accession HC20 using long-read Oxford Nanopore sequencing and Bionano optical maps. The assembly has a scaffold N50 of ~39.8 Mb and covers ~1.11 Gb of the genome. We compared the long-read genome assemblies of the U's triangle species and found extensive gene collinearity between the diploids and allopolyploids with no evidence of major gene losses. Therefore, B. juncea (AABB), B. napus (AACC), and B. carinata can be regarded as strict allopolyploids. We cataloged the nucleotide-binding and leucine-rich repeat immune receptor (NLR) repertoire of B. carinata and, identified 465 NLRs, and compared these with the NLRs in the other Brassica species. We investigated the extent and nature of early-generation genomic interactions between the constituent genomes of B. carinata and B. juncea in interspecific crosses between the two species. Besides the expected recombination between the constituent B genomes, extensive homoeologous exchanges were observed between the A and C genomes. Interspecific crosses, therefore, can be used for transferring disease resistance from B. carinata to B. juncea and broadening the genetic base of the two allotetraploid species.

Genetic mapping of some key plant architecture traits in Brassica juncea using a doubled haploid population derived from a cross between two distinct lines: vegetable type Tumida and oleiferous Varuna.

KEY MESSAGE: Genetic mapping of some key plant architectural traits in a vegetable type and an oleiferous B. juncea cross revealed QTL and candidate genes for breeding more productive ideotypes. Brassica juncea (AABB, 2n = 36), commonly called mustard, is an allopolyploid crop of recent origin but contains considerable morphological and genetic variation. An F1-derived doubled haploid population developed from a cross between an Indian oleiferous line, Varuna, and a Chinese stem type vegetable mustard, Tumida showed significant variability for some key plant architectural traits-four stem strength-related traits, stem diameter (Dia), plant height (Plht), branch initiation height (Bih), number of primary branches (Pbr), and days to flowering (Df). Multi-environment QTL analysis identified twenty Stable QTL for the above-mentioned nine plant architectural traits. Though Tumida is ill-adapted to the Indian growing conditions, it was found to contribute favorable alleles in Stable QTL for five architectural traits-press force, Dia, Plht, Bih, and Pbr; these QTL could be used to breed superior ideotypes in the oleiferous mustard lines. A QTL cluster on LG A10 contained Stable QTL for seven architectural traits that included major QTL (phenotypic variance ≥ 10%) for Df and Pbr, with Tumida contributing the trait-enhancing alleles for both. Since early flowering is critical for the cultivation of mustard in the Indian subcontinent, this QTL cannot be used for the improvement of Pbr in the Indian gene pool lines. Conditional QTL analysis for Pbr, however, identified other QTL which could be used for the improvement of Pbr without affecting Df. The Stable QTL intervals were mapped on the genome assemblies of Tumida and Varuna for the identification of candidate genes.

Understanding the Proteomes of Plant Development and Stress Responses in Brassica Crops.

Brassica crops have great economic value due to their rich nutritional content and are therefore grown worldwide as oilseeds, vegetables, and condiments. Deciphering the molecular mechanisms associated with the advantageous phenotype is the major objective of various Brassica improvement programs. As large technological advancements have been achieved in the past decade, the methods to understand molecular mechanisms underlying the traits of interest have also taken a sharp upturn in plant breeding practices. Proteomics has emerged as one of the preferred choices nowadays along with genomics and other molecular approaches, as proteins are the ultimate effector molecules responsible for phenotypic changes in living systems, and allow plants to resist variable environmental stresses. In the last two decades, rapid progress has been made in the field of proteomics research in Brassica crops, but a comprehensive review that collates the different studies is lacking. This review provides an inclusive summary of different proteomic studies undertaken in Brassica crops for cytoplasmic male sterility, oil content, and proteomics of floral organs and seeds, under different biotic and abiotic stresses including post-translational modifications of proteins. This comprehensive review will help in understanding the role of different proteins in controlling plant phenotypes, and provides information for initiating future studies on Brassica breeding and improvement programs.

Genetic Analysis of Heterosis for Yield Influencing Traits in Brassica juncea Using a Doubled Haploid Population and Its Backcross Progenies.

The exploitation of heterosis through hybrid breeding is one of the major breeding objectives for productivity increase in crop plants. This research analyzes the genetic basis of heterosis in Brassica juncea by using a doubled haploid (DH) mapping population derived from F1 between two heterotic inbred parents, one belonging to the Indian and the other belonging to the east European gene pool, and their two corresponding sets of backcross hybrids. An Illumina Infinium Brassica 90K SNP array-based genetic map was used to identify yield influencing quantitative trait loci (QTL) related to plant architecture, flowering, and silique- and seed-related traits using five different data sets from multiple trials, allowing the estimation of additive and dominance effects, as well as digenic epistatic interactions. In total, 695 additive QTL were detected for the 14 traits in the three trials using five data sets, with overdominance observed to be the predominant type of effect in determining the expression of heterotic QTL. The results indicated that the design in the present study was efficient for identifying common QTL across multiple trials and populations, which constitute a valuable resource for marker-assisted selection and further research. In addition, a total of 637 epistatic loci were identified, and it was concluded that epistasis among loci without detectable main effects plays an important role in controlling heterosis in yield of B. juncea.

A chromosome-scale assembly of allotetraploid Brassica juncea (AABB) elucidates comparative architecture of the A and B genomes.

Brassica juncea (AABB), commonly referred to as mustard, is a natural allopolyploid of two diploid species-B. rapa (AA) and B. nigra (BB). We report a highly contiguous genome assembly of an oleiferous type of B. juncea variety Varuna, an archetypical Indian gene pool line of mustard, with ~100× PacBio single-molecule real-time (SMRT) long reads providing contigs with an N50 value of >5 Mb. Contigs were corrected for the misassemblies and scaffolded with BioNano optical mapping. We also assembled a draft genome of B. nigra (BB) variety Sangam using Illumina short-read sequencing and Oxford Nanopore long reads and used it to validate the assembly of the B genome of B. juncea. Two different linkage maps of B. juncea, containing a large number of genotyping-by-sequencing markers, were developed and used to anchor scaffolds/contigs to the 18 linkage groups of the species. The resulting chromosome-scale assembly of B. juncea Varuna is a significant improvement over the previous draft assembly of B. juncea Tumida, a vegetable type of mustard. The assembled genome was characterized for transposons, centromeric repeats, gene content and gene block associations. In comparison to the A genome, the B genome contains a significantly higher content of LTR/Gypsy retrotransposons, distinct centromeric repeats and a large number of B. nigra specific gene clusters that break the gene collinearity between the A and the B genomes. The B. juncea Varuna assembly will be of major value to the breeding work on oleiferous types of mustard that are grown extensively in south Asia and elsewhere.

A Mapped Locus on LG A6 of Brassica juncea Line Tumida Conferring Resistance to White Rust Contains a CNL Type R Gene.

White rust, causal agent oomycete Albugo candida, is a significant disease of the cultivated Brassica species. The Indian gene pool lines of oilseed mustard, Brassica juncea, are highly susceptible to the pathogen. Resistance to A. candida has been reported in the east European gene pool lines of mustard and mapped to LG A4 in line Heera and LG A5 in line Donskaja-IV. A new resistance-conferring locus to A. candida isolate AcB1 has been mapped to LG A6 of B. juncea line Tumida-a Chinese vegetable type mustard using an F1DH mapping population that has been developed from a Tumida × Varuna (susceptible Indian gene pool line) cross. A molecular map containing 8,303 genic and GBS markers was used to map the resistance trait to an interval of 63.0 cM-70.8 cM on LG A6. Genome assemblies of Tumida and Varuna were used to find the genes present within the flanking markers discerned by genetic mapping. The most likely candidate gene in the mapped interval is BjuA046215, a CC-NBS-LRR (CNL) type R gene that encodes a protein with all the specific subdomains of the proteins encoded by such genes. Alleles of BjuA046215 in Varuna and other lines of the Indian and the east European gene pools encode proteins that have truncated LRR domains. Analysis of the syntenic regions in some of the Brassicaceae genomes and phylogenetic analysis of CNL type R genes showed BjuA046215 to be closely related to a recently described white rust resistance-conferring R gene BjuWRR1 in B. juncea Donskaja-IV, both belonging to the CNL-D group of R genes. Related R genes in Arabidopsis thaliana confer resistance to another oomycete, Peronospora parasitica.

QTL Landscape for Oil Content in Brassica juncea: Analysis in Multiple Bi-Parental Populations in High and "0" Erucic Background.

Increasing oil content in oilseed mustard (Brassica juncea) is a major breeding objective-more so, in the lines that have "0" erucic acid content (< 2% of the seed oil) as earlier studies have shown negative pleiotropic effect of erucic acid loci on the oil content, both in oilseed mustard and rapeseed. We report here QTL analysis of oil content in eight different mapping populations involving seven different parents-including a high oil content line J8 (~49%). The parental lines of the mapping populations contained wide variation in oil content and erucic acid content. The eight mapping populations were categorized into two sets-five populations with individuals segregating for erucic acid (SE populations) and the remaining three with zero erucic acid segregants (ZE populations). Meta-analysis of QTL mapped in individual SE populations identified nine significant C-QTL, with two of these merging most of the major oil QTL that colocalized with the erucic acid loci on the linkage groups A08 and B07. QTL analysis of oil content in ZE populations revealed a change in the landscape of the oil QTL compared to the SE populations, in terms of altered allelic effects and phenotypic variance explained by ZE QTL at the "common" QTL and observation of "novel" QTL in the ZE background. The important loci contributing to oil content variation, identified in the present study could be used in the breeding programmes for increasing the oil content in high erucic and "0" erucic backgrounds.

Comparative Analysis of Fruit Metabolites and Pungency Candidate Genes Expression between Bhut Jolokia and Other Capsicum Species.

Bhut jolokia, commonly known as Ghost chili, a native Capsicum species found in North East India was recorded as the naturally occurring hottest chili in the world by the Guinness Book of World Records in 2006. Although few studies have reported variation in pungency content of this particular species, no study till date has reported detailed expression analysis of candidate genes involved in capsaicinoids (pungency) biosynthesis pathway and other fruit metabolites. Therefore, the present study was designed to evaluate the diversity of fruit morphology, fruiting habit, capsaicinoids and other metabolite contents in 136 different genotypes mainly collected from North East India. Significant intra and inter-specific variations for fruit morphological traits, fruiting habits and 65 fruit metabolites were observed in the collected Capsicum germplasm belonging to three Capsicum species i.e., Capsicum chinense (Bhut jolokia, 63 accessions), C. frutescens (17 accessions) and C. annuum (56 accessions). The pungency level, measured in Scoville Heat Unit (SHU) and antioxidant activity measured by 2, 2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging assay showed maximum levels in C. chinense accessions followed by C. frutescens accessions, while C. annuum accessions showed the lowest value for both the traits. The number of different fruit metabolites detected did not vary significantly among the different species but the metabolite such as benzoic acid hydroxyl esters identified in large percentage in majority of C. annuum genotypes was totally absent in the C. chinense genotypes and sparingly present in few genotypes of C. frutescens. Significant correlations were observed between fruit metabolites capsaicin, dihydrocapsaicin, hexadecanoic acid, cyclopentane, α-tocopherol and antioxidant activity. Furthermore, comparative expression analysis (through qRT-PCR) of candidate genes involved in capsaicinoid biosynthesis pathway revealed many fold higher expression of majority of the genes in C. chinense compared to C. frutescens and C. annuum suggesting that the possible reason for extremely high pungency might be due to the higher level of candidate gene(s) expression although nucleotide variation in pungency related genes may also be involved in imparting variations in level of pungency.

Tetralocular ovary and high silique width in yellow sarson lines of Brassica rapa (subspecies trilocularis) are due to a mutation in Bra034340 gene, a homologue of CLAVATA3 in Arabidopsis.

KEY MESSAGE: Genetic locus for tetralocular ovary (tet-o) in Brassica rapa was identified and it was shown that the number of locules and width of silique are associated. Brassica rapa is a highly polymorphic species containing many vegetables and oleiferous types. An interesting group of oleiferous types is the yellow sarson group (subspecies trilocularis) grown mostly in eastern India. This group contains lines that have bilocular ovaries, a defining trait of Brassicaceae, but also lines that have tetralocular ovaries. Yellow sarson lines commonly have high silique width which is further enhanced in the tetralocular types. We mapped the locus influencing tetralocular ovary in B. rapa using three mapping populations (F2, F6 and F7) derived from a cross between Chiifu (subspecies pekinensis, having bilocular ovary) and Tetralocular (having tetralocular ovary). QTL mapping of silique width was undertaken using the three mapping populations and a F2 population derived from a cross between Chiifu and YSPB-24 (a bilocular line belonging to yellow sarson group). Qualitative mapping of the trait governing locule number (tet-o) in B. rapa mapped the locus to linkage group A4. QTL mapping for silique width detected a major QTL on LG A4, co-mapping with the tet-o locus in bilocular/tetralocular cross. This QTL was not detected in the bilocular/bilocular cross. Saturation mapping of the tet-o region with SNP markers identified Bra034340, a homologue of CLAVATA3 of Arabidopsis thaliana, as the candidate gene for locule number. A C → T transition at position 176 of the coding sequence of Bra034340 revealed co-segregation with the tetralocular phenotype. The study of silique related traits is of interest both for understanding evolution under artificial selection and for breeding of cultivated Brassica species.

QTL mapping of yield-associated traits in Brassica juncea: meta-analysis and epistatic interactions using two different crosses between east European and Indian gene pool lines.

Genetic analysis of 12 yield-associated traits was undertaken by dissection of quantitative trait loci (QTL) through meta-analysis and epistatic interaction studies in Brassica juncea. A consensus (integrated) map in B. juncea was constructed using two maps. These were VH map, developed earlier in the laboratory by using a DH population from the cross between Varuna and Heera (Pradhan et al. in Theor Appl Genet 106:607-614, 2003; Ramchiary et al. in Theor Appl Genet. 115:807-817, 2007; Panjabi et al. in BMC Genomics 9:113, 2008), and the TD map, developed in the present study using a DH population of 100 lines from the cross between TM-4 and Donskaja-IV. The TD map was constructed with 911 markers consisting of 585 AFLP, 8 SSR and 318 IP markers covering a total genome length of 1,629.9 cM. The consensus map constructed by using the common markers between the two maps contained a total of 2,662 markers and covered a total genome length of 1,927.1 cM. Firstly, QTL analysis of 12 yield-associated traits was undertaken for the TD population based on three-environment phenotypic data. Secondly, the three-environment phenotypic data for the same 12 quantitative traits generated by Ramchiary et al. (2007) were re-analyzed for the QTL detection in the VH map. Comparative analysis identified both common and population-specific QTL. The study revealed the presence of QTL clusters on LG A7, A8 and A10 in both TD and VH maps. Meta-analyses resolved 187 QTL distributed over nine linkage groups of TD and VH maps into 20 meta-QTL. Maximum resolution was recorded for the LG A10 wherein all the 54 QTL were mapped to a single meta-QTL within a confidence interval of 3.0 cM. Digenic epistatic interactions of QTL in both TD and VH maps revealed substantial additive × additive interactions showing a higher frequency of Type 1 and Type 2 interactions than Type 3 interactions. Some of the loci interacted with more than one locus indicating the presence of higher order epistatic interactions. These findings provided some detailed insight into the genetic architecture of the yield-associated traits in B. juncea.

Molecular mapping reveals two independent loci conferring resistance to Albugo candida in the east European germplasm of oilseed mustard Brassica juncea.

White rust caused by Albugo candida (Pers.) Kuntze is a major disease of the oilseed mustard Brassica juncea. Almost all the released varieties of B. juncea in India are highly susceptible to the disease. This causes major yield losses. Hence, there is an urgent need to identify genes for resistance to white rust and transfer these to the existing commercial varieties through marker-assisted breeding. While the germplasm belonging to the Indian gene pool is highly susceptible to the disease, the east European germplasm of B. juncea is highly resistant. In the present study, we have tagged two independent loci governing resistance to A. candida race 2V in two east European lines, Heera and Donskaja-IV. Two doubled haploid populations were used; the first population was derived from a cross between Varuna (susceptible Indian type) and Heera (partially resistant east European line) and the second from a cross between TM-4 (susceptible Indian type) and Donskaja-IV (fully resistant east European line). In both the resistant lines, a single major locus was identified to confer resistance to white rust. In Heera, the resistance locus AcB1-A4.1 was mapped to linkage group A4, while in Donskaja-IV, the resistant locus AcB1-A5.1 was mapped to linkage group A5. In both the cases, closely linked flanking markers were developed based on synteny between Arabidopsis and B. juncea. These flanking markers will assist introgression of resistance-conferring loci in the susceptible varieties.