bmp-2 Gene-Transferred Skeletal Muscles with Needle-Type Electrodes as Efficient and Reliable Biomaterials for Bone Regeneration.

BACKGROUND: Bone morphogenetic protein-2 (bmp-2) has a high potential to induce bone tissue formation in skeletal muscles. We developed a bone induction system in skeletal muscles using the bmp-2 gene through in vivo electroporation. Natural bone tissues with skeletal muscles can be considered potential candidates for biomaterials. However, our previous system using plate-type electrodes did not achieve a 100% success rate in inducing bone tissues in skeletal muscles. In this study, we aimed to enhance the efficiency of bone tissue formation in skeletal muscles by using a non-viral bmp-2 gene expression plasmid vector (pCAGGS-bmp-2) and needle-type electrodes. METHODS: We injected the bmp-2 gene with pCAGGS-bmp-2 into the skeletal muscles of rats' legs and immediately placed needle-type electrodes there. Skeletal tissues were then observed on the 21st day after gene transfer using soft X-ray and histological analyses. RESULTS: The use of needle-type electrodes resulted in a 100% success rate in inducing bone tissues in skeletal muscles. In contrast, the plate-type electrodes only exhibited a 33% success rate. Thus, needle-type electrodes can be more efficient and reliable for transferring the bmp-2 gene to skeletal muscles, making them potential biomaterials for repairing bone defects.

Improved Dissolution Properties of Co-amorphous Probucol with Atorvastatin Calcium Trihydrate Prepared by Spray-Drying.

A co-amorphous model drug was prepared by the spray-drying (SD) of probucol (PC) and atorvastatin calcium trihydrate salt (ATO) as low water solubility and co-former components, respectively. The physicochemical properties of the prepared samples were characterized by powder X-ray diffraction (PXRD) analysis, thermal analysis, Fourier transform infrared spectroscopy (FTIR), and dissolution tests. Stability tests were also conducted under a stress environment of 40 °C and 75% relative humidity. The results of PXRD measurements and thermal analysis suggested that PC and ATO form a co-amorphous system by SD. Thermal analysis also indicated an endothermic peak that followed an exotherm in amorphous PC and a physical mixture (PM) of amorphous PC and ATO; however, no endothermic peak was detected in the co-amorphous system. The dissolution profiles for PC in the co-amorphous sample composed of PC and ATO were improved compared to those for raw PC crystals or the PM. Stability tests indicated that the co-amorphous material formed by PC and ATO can be stored for 35 d without crystallization, whereas amorphous PC became crystallized within a day. Therefore, co-amorphization of PC and ATO prepared by SD is considered to be a useful method to improve the solubility of PC in water.

[Microtaggant Technology for Ensuring Traceability of Pharmaceutical Formulations: Potential for Anti-counterfeiting Measures, Distribution and Medication Management].

The globalization of drug trade has led to the increased production of falsified medicines. In addition, poor medication adherence increases the costs of healthcare. The need to manage medication has given rise to marketing of highly functional networked digital medicine. Therefore, a growing need has emerged to ensure the traceability of pharmaceutical products from shipment to patient distribution. Microtaggant technologies that can encode individual numbers on pharmaceutical products are expected to serve achieving this goal. Taggants are a class of materials that can be applied to an object to make it identifiable, like barcodes and holograms. Since the smaller size of microtaggant make it invisible to naked eyes, it is more difficult to reverse-engineer than conventional taggants. The U.S. Food and Drug Administration (FDA) has established guidelines for the use of microtaggants. Many studies have explored the use of various analytical technologies and materials as the microtaggants. However, the advantages and disadvantages of each method have not been established yet. In this review, recent research on the use of microtaggants for anti-counterfeiting is summarized and compared to current anti-counterfeiting technologies with spectrographic methods, distribution management systems with barcodes, and medication management systems with sensor devices. We also discuss the microtaggants implementation costs and security level.

Brown adipose tissue dysfunction promotes heart failure via a trimethylamine N-oxide-dependent mechanism.

Low body temperature predicts a poor outcome in patients with heart failure, but the underlying pathological mechanisms and implications are largely unknown. Brown adipose tissue (BAT) was initially characterised as a thermogenic organ, and recent studies have suggested it plays a crucial role in maintaining systemic metabolic health. While these reports suggest a potential link between BAT and heart failure, the potential role of BAT dysfunction in heart failure has not been investigated. Here, we demonstrate that alteration of BAT function contributes to development of heart failure through disorientation in choline metabolism. Thoracic aortic constriction (TAC) or myocardial infarction (MI) reduced the thermogenic capacity of BAT in mice, leading to significant reduction of body temperature with cold exposure. BAT became hypoxic with TAC or MI, and hypoxic stress induced apoptosis of brown adipocytes. Enhancement of BAT function improved thermogenesis and cardiac function in TAC mice. Conversely, systolic function was impaired in a mouse model of genetic BAT dysfunction, in association with a low survival rate after TAC. Metabolomic analysis showed that reduced BAT thermogenesis was associated with elevation of plasma trimethylamine N-oxide (TMAO) levels. Administration of TMAO to mice led to significant reduction of phosphocreatine and ATP levels in cardiac tissue via suppression of mitochondrial complex IV activity. Genetic or pharmacological inhibition of flavin-containing monooxygenase reduced the plasma TMAO level in mice, and improved cardiac dysfunction in animals with left ventricular pressure overload. In patients with dilated cardiomyopathy, body temperature was low along with elevation of plasma choline and TMAO levels. These results suggest that maintenance of BAT homeostasis and reducing TMAO production could be potential next-generation therapies for heart failure.

Physical stability of stealth nanobeacon using surface-enhanced Raman scattering for anti-counterfeiting and monitoring medication adherence: Deposition on various coating tablets.

Microtaggant technologies can encode individual numbers on coating tablet to authenticate pharmaceutical products and, therefore, combat the global spread of falsified medicine. In this study, a novel microtaggant, stealth nanobeacon (NB), with surface-enhanced Raman scattering (SERS) activity was applied to various coating tablets and its physical stability was evaluated. The NBs were composed of a reporter molecule (AH, adenine hydrochloride) and prepared with different sizes of gold nanoparticles (AuNPs). The NBs were directly deposited on the surface of various model coatings (e.g., hydroxypropyl cellulose, hydroxypropyl methyl cellulose, Eudragit® RS30D, ethyl cellulose). To investigate physical stability of the NB on the coating tablets, SERS spectra of the NB after friability test and acceleration test (store at 75% RH, 40 °C) were evaluated using a portable Raman spectrometer. After the friability test, there was no significant decrease in the peak intensity of the SERS signal (PH) for authentication in all samples. In the acceleration test, the SERS signals of the samples were attenuated, but sufficient SERS signal intensity (PH > 70) was maintained in the seven types of coating for authentication. These results demonstrate that the microtaggant NB has the potential to be used for a wide range of coating tablets.

Rap1 prevents colitogenic Th17 cell expansion and facilitates Treg cell differentiation and distal TCR signaling.

T-cell-specific Rap1 deletion causes spontaneous colitis in mice. In the present study, we revealed that Rap1 deficiency in T cells impaired the preceding induction of intestinal RORγt+ Treg cells. In the large intestinal lamina propria (LILP) of T-cell-specific Rap1-knockout mice (Rap1KO mice), Th17 cells were found to increase in a microbiota-dependent manner, and the inhibition of IL-17A production prevented the development of colitis. In the LILP of Rap1KO mice, RORγt+ Treg cells were scarcely induced by 4 weeks of age. The expression of CTLA-4 on Rap1-deficient Treg cells was reduced and the expression of CD80 and CD86 on dendritic cells was consequently elevated in Rap1KO mice. When cultured under each polarizing condition, Rap1-deficient naïve CD4+ T cells did not show biased differentiation into Th17 cells; their differentiation into Treg cells as well as Th1 and Th2 cells was lesser than that of wild-type cells. Rap1-deficient naïve CD4+ T cells were found to exhibit the defective nuclear translocation of NFAT and formation of actin foci in response to TCR engagement. These data suggest that Rap1 amplifies the TCR signaling required for Treg-mediated control of intestinal colitogenic Th17 responses.

Periodontal Tissue as a Biomaterial for Hard-Tissue Regeneration following bmp-2 Gene Transfer.

The application of periodontal tissue in regenerative medicine has gained increasing interest since it has a high potential to induce hard-tissue regeneration, and is easy to handle and graft to other areas of the oral cavity or tissues. Additionally, bone morphogenetic protein-2 (BMP-2) has a high potential to induce the differentiation of mesenchymal stem cells into osteogenic cells. We previously developed a system for a gene transfer to the periodontal tissues in animal models. In this study, we aimed to reveal the potential and efficiency of periodontal tissue as a biomaterial for hard-tissue regeneration following a bmp-2 gene transfer. A non-viral expression vector carrying bmp-2 was injected into the palate of the periodontal tissues of Wistar rats, followed by electroporation. The periodontal tissues were analyzed through bone morphometric analyses, including mineral apposition rate (MAR) determination and collagen micro-arrangement, which is a bone quality parameter, before and after a gene transfer. The MAR was significantly higher 3-6 d after the gene transfer than that before the gene transfer. Collagen orientation was normally maintained even after the bmp-2 gene transfer, suggesting that the bmp-2 gene transfer has no adverse effects on bone quality. Our results suggest that periodontal tissue electroporated with bmp-2 could be a novel biomaterial candidate for hard-tissue regeneration therapy.

Design and preparation of nanocomposite acrylate coating agents for binder-free dry coating of 100 µm-sized drug-containing particles and their coating performance.

For binder-free dry particulate coating to prepare controlled-release micron-sized particles, we designed nanocomposite coating agents with the intention to form a core-shell structure composed of two types of acrylic polymers with different glass transition temperatures (Tg) and evaluated their coating performance. A series of nanocomposite acrylic latexes synthesized by emulsion polymerization was freeze-dried after salting-out to create the powder form. An ion-exchange resin loaded with diclofenac sodium (DS, a model drug) (IER-DS) with a median diameter of approximately 100 µm was used as the core particle. Dry coating of the IER-DS with nanocomposite coating agents was carried out using a laboratory-made coating apparatus assisted with mild-intensity vibration and zirconia bead impaction. The coated particles were cured by heating at a temperature 20 °C higher than the Tg for 12 h to complete the film-forming process. It was found that the highest coating efficiency (more than 70%) and a remarkably prolonged release period of the drug (the time required for 50% release reached approximately 12 h) could be achieved when nanocomposite coating agents with a soft polymeric core (Tg = 30 °C) and a hard polymeric shell (Tg = 80 °C) were applied. In contrast, nanocomposite coating agents with a combination of a hard polymeric core and a soft polymeric shell resulted in lower coating efficiency. These results demonstrate that nanocomposite polymeric coating agents composed of a soft core and a hard shell are effective for the production of drug-loaded microparticles with a prolonged release function by a binder-free dry-coating process.

Lactoferrin Ameliorates Dry Eye Disease Potentially through Enhancement of Short-Chain Fatty Acid Production by Gut Microbiota in Mice.

Lactoferrin is a glycoprotein found at high concentrations within exocrine secretions, including tears. Low levels of lactoferrin have been implicated in the loss of tear secretion and ageing. Furthermore, lactoferrin possesses a range of functionalities, including anti-inflammatory properties and the ability to modulate the gut microbiota. Expanding evidence demonstrates a crucial role of the gut microbiota in immune regulation and development. The specific composition of bacterial species of the gut has a profound influence on local and systemic inflammation, leading to a protective capacity against a number of inflammatory diseases, potentially by the induction of regulatory immune cells. In this study, we demonstrated that oral administration of lactoferrin maintains tear secretion in a restraint and desiccating stress induced mouse model of dry eye disease. Furthermore, we revealed that lactoferrin induces the reduction of inflammatory cytokines, modulates gut microbiota, and induces short-chain fatty acid production. Whereas, the antibiotic vancomycin abrogates the effects of lactoferrin on dry eye disease and significantly reduces short-chain fatty acid concentrations. Therefore, this protective effect of LF against a mice model of DED may be explained by our observations of an altered gut microbiota and an enhanced production of immunomodulatory short-chain fatty acids.

Complete Genome Sequence of Adlercreutzia equolifaciens subsp. celatus DSM 18785.

Adlercreutzia equolifaciens subsp. celatus DSM 18785 was isolated from the cecal contents of a rat and is an obligately anaerobic equol-producing bacterium. Here, we report the finished and annotated genome sequence of this organism, which has a genome size of 2,929,991 bp and a G+C content of 63.2%.

Crystallographic evaluation of the conformation of quetiapine included in ß-cyclodextrin.

Single-crystal X-ray diffraction and theoretical calculations were conducted for insights into the ß-cyclodextrin (ß-CD)-quetiapine inclusion complex structure. ß-CD and quetiapine form a host-guest inclusion complex at a ratio of 2:1 in which the ß-CD molecules form head-to-head dimers with their secondary hydroxyl groups linked by multiple hydrogen bonds. Quetiapine is totally contained within the ß-CD cavity and exhibits two kinds of disorder (parts 1 and 2) in opposite directions in the ß-CD complex. To clarify the mobility of the guest molecule in the ß-CD cavity, theoretical molecular conformational calculations, crystal optimization and crystal energy calculations were conducted using CONFLEX software. The results of theoretical molecular conformation calculations showed that the mobility of quetiapine is restricted because its tricyclic structure is covered by ß-CD. The results of crystal energy calculations indicated that the conformation of disorder part 1, which has high occupancy, was more stable.

Optimization of ionic liquid-incorporated PLGA nanoparticles for treatment of biofilm infections.

Ionic liquids (ILs) containing imidazolium cations have a number of useful properties, such as high permeability to cells, high antimicrobial activity, and good biocompatibility. With the aid of ILs, transdermal delivery, solubilization of poorly soluble drugs were developed and therapeutic effects were improved. In this work, 1­butyl­3­methylimidazolium hexafluorophosphate-incorporated, chitosan-modified, submicron-sized poly(dl­lactide­co­glycolide) (PLGA) nanoparticles (NPs) were prepared using the emulsion solvent diffusion method for the treatment of biofilm infections. Prepared IL-incorporated PLGA NPs using surfactants such as Tween-80 and poloxamer-188 showed a high antibacterial activity to the bacterial cells under the biofilm. Additionally, antibacterial mechanism of IL-incorporated PLGA NPs was revealed by annular dark field scanning transmission electron microscopy combined a simple sample pretreatment method. We established a drug delivery system using IL-incorporated PLGA NPs to enhance the potential of polymeric nanocarriers for treating biofilm infections.

Evaluation of Tumor Tissue Fixation Effects of Formulation Modified Mohs Pastes in Mice and Their Water-Absorbing Properties.

Mohs paste (MP) is a hospital preparation containing zinc hydrochloride and zinc oxide starch. It is a topical medication used to fixate tissues for the removal of inoperable skin tumors and the management of hemorrhage and exudates, and to prevent foul odor resulting from secondary infections. However, it has problems, such as changes in hardness and viscoelasticity with time and liquefaction by exudate. It has been reported that the modified MP with D-sorbitol (S-MP) and the modified MP using the cellulose instead of starch (C-MP) have excellent physicochemical stability and better handling than original MP (O-MP). In this study, the effect of prescription improvement of MP on the pharmacological effect was examined with reference to water absorbing property, and its tumor tissue invasion fixation depth as an indicator. In the S-MP and C-MP, the amounts of water absorption did not differ significantly from those in the O-MP. The hardness of S-MP was decreased and liquefied like O-MP after absorbing water. In contrast, C-MP retained its form even after water absorption. The subcutaneous tumors in mice treated with modified MP formulations were measured for invasion fixation depth at 6 and 24 h after application. And the tissue status was observed using computed tomography. In all MPs, invasion fixation depth increased depending on application time. S-MP and O-MP depths did not differ significantly. The invasion depths of the C-MP significantly increased compared with those in the O-MP. These results suggest that C-MP had a high tissue fixation rate.

Analysis of mineral apposition rates during alveolar bone regeneration over three weeks following transfer of BMP-2/7 gene via in vivo electroporation

Alveolar bone is not spontaneously regenerated following trauma or periodontitis. We previously proposed an animal model for new alveolar bone regeneration therapy based on the non-viral BMP-2/7 gene expression vector and in vivo electroporation, which induced the formation of new alveolar bone over the course of a week. Here, we analysed alveolar bone during a period of three weeks following gene transfer to periodontal tissue. Non-viral plasmid vector pCAGGS-BMP-2/7 or pCAGGS control was injected into palatal periodontal tissue of the first molar of the rat maxilla and immediately electroporated with 32 pulses of 50 V for 50 msec. Over the following three weeks, rats were double bone-stained by calcein and tetracycline every three days and mineral apposition rates (MAR) were measured. Double bone-staining revealed that MAR of alveolar bone was as similar level three days before BMP-2/7 gene transfer as three days after gene transfer. However, from 3 to 6 days, 6 to 9 days, 9 to 12 days, 12 to 15 days, 15 to 18 days, and 18 to 20 days after, MARs were significantly higher than prior to gene transfer. Our proposed gene therapy for alveolar bone regeneration combining non-viral BMP-2/7 gene expression vector and in vivo electroporation could increase alveolar bone regeneration potential in the targeted area for up to three weeks.

[Clinical Application of Basic Research on Mohs' Paste to Meet Medical Needs].

　Mohs' paste (MP), which is widely used in medical services as a specific hospital preparation, has been considered to have demerits, such as increased hardness after preparation and marked adhesiveness. However, factors associated with variations in its physical properties have not yet been clarified. Therefore, we conducted studies to clarify the physicochemical phenomena influencing such variations, and also examined prescription drug designs of MP preparations that are difficult to use clinically due to the above-mentioned demerits, with a view to improving their usability. Furthermore, with cooperation from the director of the Department of Palliative Care and Maintenance Therapy and certified wound ostomy and continence (WOC) nurses of Yokohama Minami Kyousai Hospital, we clinically applied an improved form of MP I. We also examined the effects of an improved MP II (designed as a stable formulation) in mice. This is an example of the clinical application of basic research to design a new clinical formulation in order to meet medical needs.

Improvement in the water solubility of drugs with a solid dispersion system by spray drying and hot-melt extrusion with using the amphiphilic polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer and d-mannitol.

The aim of this study was to prepare and characterize solid dispersion particles with a novel amphiphilic polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer, as a water-soluble carrier. Solid dispersion particles were prepared by hot-melt extrusion and spray drying. Indomethacin (IMC) was used as a model comprising drugs with low solubility in water and d-mannitol (MAN) was used as an excipient. The physicochemical properties of prepared particles were characterized by scanning electron microscopy, thermal analysis, powder X-ray diffraction (PXRD) analysis, FTIR spectra analysis, and drug release studies. Stability studies were also conducted under stress conditions at 40°C, 75% relative humidity. We found that dissolution behavior of the original drug crystal could be improved by solid dispersion with the polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer. The PXRD pattern and thermal analysis indicated that the solid dispersion prepared with the polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer and IMC was in an amorphous state. FTIR spectra analysis indicated that the interaction manner between the polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer and IMC may differ with the preparation method and formulation of solid dispersions. Stability studies proved that the amorphous state of IMC in solid dispersion particles was preserved under stress conditions for more than two weeks.

Non-surgical model for alveolar bone regeneration by bone morphogenetic protein-2/7 gene therapy.

BACKGROUND: Alveolar bone is a critical tissue for tooth retention; however, once alveolar bone is lost, it may not spontaneously regenerate. Currently, bone grafts or artificial bone is commonly used for alveolar bone regeneration therapy. However, these therapies require surgical procedures, which present risks, particularly in elderly patients. Therefore, development of alveolar bone regeneration techniques that do not require surgical procedures is critical. It is well known that stem cells present in the periosteal and periodontal ligament may be induced to differentiate into osteogenic cells. This study hypothesizes that transfer of the bone morphogenetic protein-2/7 (BMP-2/7) gene into periodontal tissues via in vivo electroporation induces exogenous BMP production and causes stem cells in periodontal tissues to differentiate into osteogenic cells, enabling generation of new alveolar bone. METHOD: The BMP-2/7 gene expression vector was introduced via electroporation into the target site in periodontal tissues of the first molar of rat maxillae. RESULTS: Exogenous BMP-2 and -7 were detected in the target areas, and growth of new alveolar bone tissue was observed 5 days after gene transfer. On day 7, new alveolar bone tissues were found to connect to the original bone tissues. Moreover, mineral apposition rates of the alveolar bone after BMP-2/7 gene transfer were significantly higher than those in the control group after LacZ gene transfer. CONCLUSION: The present findings indicate that a combination of the BMP-2/7 non-viral vector and in vivo electroporation represents a promising non-surgical option for alveolar bone regeneration therapy.

SEM imaging of the stimulatory response of RAW264.7 cells against Porphyromonas gingivalis using a simple technique employing new conductive materials.

In the medical biology, it is essential to understand not only biological morphology but also the interaction between biological materials and agents. To study these, electron microscopy (EM) is often utilized. However, sample preparation techniques for EM require a high level of skill and a considerable time. Here, we conducted EM using a simple technique employing a conductive liquid, BEL-1, and compared the results with another simple technique employing an ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4 ]). BEL-1 was used for sample pretreatment, and the morphologies of the mouse RAW 264.7 cell line, Porphyromonas gingivalis, and the RAW 264.7 cell line were stimulated via co-incubation with P. gingivalis and observed using field emission scanning EM (FE-SEM). In the present study, the inflammation-induced system of P. gingivalis was successfully established. FE-SEM results revealed the fine morphology of the RAW 264.7 cell line and P. gingivalis and confirmed a morphological change in the RAW 264.7 cell line caused by P. gingivalis stimulation. Using the developed sample preparation technique employing BEL-1, high-contrast and high-resolution observations of deformable biological materials were conducted without any difficulty or the necessity for complicated technique. This morphological information and the developed techniques can contribute to reveal the interaction between biological materials and agents and thereby accelerate drug formulation and disease treatment. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1280-1285, 2018.

Determination of cell fate in skeletal muscle following BMP gene transfer by in vivo electroporation.

We previously developed a novel method for gene transfer, which combined a non-viral gene expression vector with transcutaneous in vivo electroporation. We applied this method to transfer the bone morphogenetic protein (BMP) gene and induce ectopic bone formation in rat skeletal muscles. At present, it remains unclear which types of cells can differentiate into osteogenic cells after BMP gene transfer by in vivo electroporation. Two types of stem cells in skeletal muscle can differentiate into osteogenic cells: muscle-derived stem cells, and bone marrow-derived stem cells in the blood. In the present study, we transferred the BMP gene into rat skeletal muscles. We then stained tissues for several muscle-derived stem cell markers (e.g., Pax7, M-cadherin), muscle regeneration-related markers (e.g., Myod1, myogenin), and an inflammatory cell marker (CD68) to follow cell differentiation over time. Our results indicate that, in the absence of BMP, the cell population undergoes muscle regeneration, whereas in its presence, it can differentiate into osteogenic cells. Commitment towards either muscle regeneration or induction of ectopic bone formation appears to occur five to seven days after BMP gene transfer.