The role of perceptual processing in the oddball effect revealed by the Thatcher illusion.

When a novel stimulus (oddball) appears after repeated presentation of an identical stimulus, the oddball is perceived to last longer than the repeated stimuli, a phenomenon known as the oddball effect. We investigated whether the perceptual or physical differences between the repeated and oddball stimuli are more important for the oddball effect. To manipulate the perceptual difference while keeping their physical visual features constant, we used the Thatcher illusion, in which an inversion of a face hinders recognition of distortion in its facial features. We found that the Thatcherized face presented after repeated presentation of an intact face induced a stronger oddball effect when the faces were upright than when they were inverted (Experiment 1). However, the difference in the oddball effect between face orientations was not observed when the intact face was presented as the oddball after repeated presentation of a Thatcherized face (Experiment 2). These results were replicated when participants performed both the intact-repeated and Thatcherized-repeated conditions in a single experiment (Experiment 3). Two control experiments confirmed that the repeated presentation of the preceding stimuli is necessary for the difference in duration distortion to occur (Experiments 4 and 5). The results suggest the considerable role of perceptual processing in the oddball effect. We discuss the discrepancy in the results between the intact-repeated and Thatcherized-repeated conditions in terms of predictive coding.

Face adaptation induces duration distortion of subsequent face stimuli in a face category-specific manner.

Studies have shown that duration perception depends on several visual processes. However, the stages of visual processes that contribute to duration perception remain unclear. This study examined the effects of categorical differences in face adaptation on perceived duration. In all the experiments, we compared the perceived durations of human, monkey, and cat faces (comparison stimuli) after adapting to a human face. Results revealed that the human comparison stimuli were perceived shorter than the monkey and cat comparison stimuli (categorical face adaptation on duration perception [CFAD]). The difference between the face categories disappeared when the adapting stimulus was rendered unrecognizable by phase scrambling, indicating that adaptation to low-level visual properties cannot fully account for the CFAD effect. Furthermore, CFAD was preserved but attenuated when the adapting stimulus was inverted or a 1,000-ms interval was inserted before the comparison stimuli, which implied that CFAD occurred as long as the adapting stimulus was perceived as a face and not simply based on conceptual category processes. These findings indicate that face adaptation affects perceived duration in a category-specific manner (the CFAD effect) and highlights the involvement of visual categorical processes in duration perception.

Double-Layered Perovskite Oxyfluoride Cathodes with High Capacity Involving O-O Bond Formation for Fluoride-Ion Batteries.

Developing electrochemical high-energy storage systems is of crucial importance toward a green and sustainable energy supply. A promising candidate is fluoride-ion batteries (FIBs), which can deliver a much higher volumetric energy density than lithium-ion batteries. However, typical metal fluoride cathodes with conversion-type reactions cause a low-rate capability. Recently, layered perovskite oxides and oxyfluorides, such as LaSrMnO4 and Sr3Fe2O5F2, have been reported to exhibit relatively high rate performance and cycle stability compared to typical metal fluoride cathodes with conversion-type reactions, but their discharge capacities (∼118 mA h/g) are lower than those of typical cathodes used in lithium-ion batteries. Here, we show that double-layered perovskite oxyfluoride La1.2Sr1.8Mn2O7-δF2 exhibits (de) intercalation of two fluoride ions to rock-salt slabs and further (de) intercalation of excess fluoride ions to the perovskite layer, leading to a reversible capacity of 200 mA h/g. The additional fluoride-ion intercalation leads to the formation of O-O bond in the structure for charge compensation (i.e., anion redox). These results highlight the layered perovskite oxyfluorides as a new class of active materials for the construction of high-performance FIBs.

How many categories are there in crossmodal correspondences? A study based on exploratory factor analysis.

Humans naturally associate stimulus features of one sensory modality with those of other modalities, such as associating bright light with high-pitched tones. This phenomenon is called crossmodal correspondence and is found between various stimulus features, and has been suggested to be categorized into several types. However, it is not yet clear whether there are differences in the underlying mechanism between the different kinds of correspondences. This study used exploratory factor analysis to address this question. Through an online experiment platform, we asked Japanese adult participants (Experiment 1: N = 178, Experiment 2: N = 160) to rate the degree of correspondence between two auditory and five visual features. The results of two experiments revealed that two factors underlie the subjective judgments of the audiovisual crossmodal correspondences: One factor was composed of correspondences whose auditory and visual features can be expressed in common Japanese terms, such as the loudness-size and pitch-vertical position correspondences, and another factor was composed of correspondences whose features have no linguistic similarities, such as pitch-brightness and pitch-shape correspondences. These results confirm that there are at least two types of crossmodal correspondences that are likely to differ in terms of language mediation.

Improving the Cyclic Reversibility of Layered Li-Rich Cathodes by Combining Oxygen Vacancies and Surface Fluorination.

Layered-type Li-rich cathode materials have attracted significant attention for next-generation Li-ion batteries, but the advantage of their high capacity is eclipsed by their poor reversibility upon cycling. Irreversible oxygen redox activity and surface degradation have been deemed as the root cause and direct cause for their poor performance, respectively. We attempted to suppress surface degradation by inserting fluoride ions up to some depth on the surface. By fluorination with NH4HF2 after introducing a significant amount of oxygen vacancies in layered Li1.2Ni0.2Co0.2Mn0.4O2 by using CaH2 as a reducing agent, the reversible capacity reached 268 mAh/g, and the capacity retention after 100 cycles was about 99%. The scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS) technique revealed that, in contrast to directly fluorinated samples, our materials exhibit deeper fluorine signals besides surface signals, and hard X-ray photoelectron spectroscopy (HAXPES) patterns show ionic and covalent fluorine coordination. These results indicate that the combination of oxygen deficiency introduction and surface fluorination allows some F- ions to occupy near-surface oxygen vacancy sites rather than forming only a LiF layer on the surface, suggesting a new strategy to modify cathode materials for lithium-ion batteries.

Investigating Degradation Mechanisms in PtCo Alloy Catalysts: The Role of Co Content and a Pt-Rich Shell Using Operando High-Energy Resolution Fluorescence Detection X-ray Absorption Spectroscopy.

Low Pt-based alloy catalysts are regarded as an efficient strategy in achieving high activity for the oxygen reduction reaction (ORR) in proton-exchange membrane fuel cells (PEMFCs). However, the desired durability for the low Pt-based catalysts, such as the Pt1Co3 catalyst, has still been considered a great challenge for PEMFCs. In this study, we investigate sub-2.5 nm PtxCoy alloy catalysts with varying Co content and Pt1Co3@Pt core-shell (CS) nanostructure catalysts obtained through a simple displacement reaction. The Pt1Co3@Pt_H catalysts showed a high mass activity (MA) of 1.46 A/mgPt at 0.9 V and 14% MA loss after 10k accelerated degradation test (ADT) cycles, which suggested the improved stability compared with Pt1Co3 catalysts (52% MA loss). To clarify the degradation mechanism, operando high-energy resolution fluorescence detection X-ray absorption spectroscopy (XAS) was applied in addition to conventional advanced measurement techniques, including operando conventional XAS, to analyze the electronic state and structure changes during operation potentials. We found that introducing Co improves the catalysts' activity mainly from the strain effect, but an excessive amount of Co leads to increased Pt-oxidation, which accelerates the degradation of the catalysts. The Pt1Co3@Pt_H catalyst shows high tolerance to Pt-oxidation, benefiting both the stability and activity. Our findings demonstrate an in-depth understanding of the degradation mechanism and the importance of designing PtCo CS nanostructures with optimal Co content for enhanced performance in PEMFCs.

Catheter-associated Mycobacterium intracellulare biofilm infection in C3HeB/FeJ mice.

Non-tuberculosis mycobacterial (NTM) diseases are steadily increasing in prevalence and mortality worldwide. Mycobacterium avium and M. intracellulare, the two major pathogens of NTM diseases, are resistant to antibiotics, and chlorine, necessitating their capacity to survive in natural environments (e.g. soil and rivers) and disinfected municipal water. They can also form biofilms on artificial surfaces to provide a protective barrier and habitat for bacilli, which can cause refractory systemic disseminated NTM disease. Therefore, preventing biofilm formation by these pathogens is crucial; however, not many in vivo experimental systems and studies on NTM biofilm infection are available. This study develops a mouse model of catheter-associated systemic disseminated disease caused by M. intracellulare that reproduces the pathophysiology of catheter-associated infections observed in patients undergoing peritoneal dialysis. In addition, the bioluminescence system enabled noninvasive visualization of the amount and distribution of bacilli in vivo and conveniently examine the efficacy of antimicrobials. Furthermore, the cellulose-based biofilms, which were extensively formed in the tissue surrounding the catheter insertion site, reduced drug therapy effectiveness. Overall, this study provides insights into the cause of the drug resistance of NTM and may guide the development of new therapies for NTM diseases.

Unique Li deposition behavior in Li3PS4 solid electrolyte observed via operando X-ray computed tomography.

The problem of lithium dendrites must be addressed for practical lithium metal all-solid-state batteries. Herein, three-dimensional morphological changes within Li3PS4 electrolyte away from the anode were observed using operando X-ray computed tomography. We revealed that the electronic conduction of decomposition and the electrolyte/void interface cause the lithium deposition within the Li3PS4.

WormTensor: a clustering method for time-series whole-brain activity data from C. elegans.

BACKGROUND: In the field of neuroscience, neural modules and circuits that control biological functions have been found throughout entire neural networks. Correlations in neural activity can be used to identify such neural modules. Recent technological advances enable us to measure whole-brain neural activity with single-cell resolution in several species including [Formula: see text]. Because current neural activity data in C. elegans contain many missing data points, it is necessary to merge results from as many animals as possible to obtain more reliable functional modules. RESULTS: In this work, we developed a new time-series clustering method, WormTensor, to identify functional modules using whole-brain activity data from C. elegans. WormTensor uses a distance measure, modified shape-based distance to account for the lags and the mutual inhibition of cell-cell interactions and applies the tensor decomposition algorithm multi-view clustering based on matrix integration using the higher orthogonal iteration of tensors (HOOI) algorithm (MC-MI-HOOI), which can estimate both the weight to account for the reliability of data from each animal and the clusters that are common across animals. CONCLUSION: We applied the method to 24 individual C. elegans and successfully found some known functional modules. Compared with a widely used consensus clustering method to aggregate multiple clustering results, WormTensor showed higher silhouette coefficients. Our simulation also showed that WormTensor is robust to contamination from noisy data. WormTensor is freely available as an R/CRAN package https://cran.r-project.org/web/packages/WormTensor .

Protection Against Absorption Passivation on Platinum by a Nitrogen-Doped Carbon Shell for Enhanced Oxygen Reduction Reaction.

In polymer electrolyte type fuel cells, the platinum-based catalysts are applied for the oxygen reduction reaction. However, the specific adsorption from the sulfo group in perfluorosulfonic acid ionomers has been considered to passivate the active sites of the platinum. Herein, we present platinum catalysts covered by an ultrathin two-dimensional nitrogen-doped carbon shell (CNx) layer to protect the platinum from the specific adsorption of perfluorosulfonic acid ionomers. Such coated catalysts were obtained by the facile polydopamine coating method, which is available to tune the thickness of the carbon shell by tuning the polymerization time. The coated catalysts that possess a CNx with a thickness of 1.5 nm demonstrated superior ORR activity and comparable oxygen diffusivity when compared to the commercial Pt/C. These results were supported by the changes in the electronic statements observed in the X-ray photoelectron spectroscopy (XPS) and CO stripping analyses. Furthermore, the oxygen coverage, CO displacement charge, and operando X-ray absorption spectroscopy (XAS) tests were employed to identify the protection effect of CNx in coated catalysts compared with the Pt/C catalysts. In summary, the CNx could not only suppress the oxide species generation but also prevent the specific adsorption of the sulfo group in the ionomer.

Potassium-rich antiperovskites K3HTe and K3FTe and their structural relation to lithium and sodium counterparts.

Unlike perovskite oxides, antiperovskites M3HCh and M3FCh (M = Li, Na; Ch = S, Se, Te) mostly retain their ideal cubic structure over a wide range of compositions owing to anionic size flexibility and low-energy phonon modes that promote their ionic conductivity. In this study, we show the synthesis of potassium-based antiperovskites K3HTe and K3FTe and discuss the structural features in comparison with lithium and sodium analogues. It is shown experimentally and theoretically that both compounds maintain a cubic symmetry and can be prepared at ambient pressure, in contrast to most of the reported M3HCh and M3FCh which require high pressure synthesis. A systematic comparison of a series of cubic M3HTe and M3FTe (M = Li, Na, K) revealed that telluride anions contract in the order of K, Na, Li, with a pronounced contraction in the Li system. This result can be understood in terms of the difference in charge density of alkali metal ions as well as the size flexibility of Ch anions, contributing to the stability of the cubic symmetry.

Identification of CUL4A-DDB1-WDFY1 as an E3 ubiquitin ligase complex involved in initiation of lysophagy.

Macroautophagy is a bulk degradation system in which double membrane-bound structures called autophagosomes to deliver cytosolic materials to lysosomes. Autophagy promotes cellular homeostasis by selectively recognizing and sequestering specific targets, such as damaged organelles, protein aggregates, and invading bacteria, termed selective autophagy. We previously reported a type of selective autophagy, lysophagy, which helps clear damaged lysosomes. Damaged lysosomes become ubiquitinated and recruit autophagic machinery. Proteomic studies using transfection reagent-coated beads and further evaluations reveal that a CUL4A-DDB1-WDFY1 E3 ubiquitin ligase complex is essential to initiate lysophagy and clear damaged lysosomes. Moreover, we show that LAMP2 is ubiquitinated by the CUL4A E3 ligase complex as a substrate on damaged lysosomes. These results reveal how cells selectively tag damaged lysosomes to initiate autophagy for the clearance of lysosomes.

Changes in face category induce stronger duration distortion in the temporal oddball paradigm.

A novel stimulus embedded in a sequence of repeated stimuli is often perceived to be longer in duration. Studies have indicated the involvement of repetition suppression in this duration distortion, but it remains unclear which processing stages are important. The present study examined whether high-level visual category processing contributes to the oddball's duration distortion. In Experiment 1, we presented a novel face image in either human, monkey, or cat category after a repetition of an identical human face image in the temporal oddball paradigm. We found that the duration distortion of the last stimulus increased when the face changed across different categories, than when it changed within the same category. However, the effect of category change disappeared when globally scrambled and locally scrambled face images were used in Experiments 2 and 3, respectively, suggesting that the difference in duration distortion cannot be attributed to low-level visual properties of the images. Furthermore, in Experiment 4, we again used intact face images and found that category changes can influence the duration distortion even when a series of different human faces was presented before the last stimulus. These findings indicate that high-level visual category processing plays an important role in the duration distortion of oddballs. This study supports the idea that visual processing at higher visual stages is involved in duration perception. (219 words).

Suppression of Charge Recombination by Auxiliary Atoms in Photoinduced Charge Separation Dynamics with Mn Oxides: A Theoretical Study.

Charge separation is one of the most crucial processes in photochemical dynamics of energy conversion, widely observed ranging from water splitting in photosystem II (PSII) of plants to photoinduced oxidation reduction processes. Several basic principles, with respect to charge separation, are known, each of which suffers inherent charge recombination channels that suppress the separation efficiency. We found a charge separation mechanism in the photoinduced excited-state proton transfer dynamics from Mn oxides to organic acceptors. This mechanism is referred to as coupled proton and electron wave-packet transfer (CPEWT), which is essentially a synchronous transfer of electron wave-packets and protons through mutually different spatial channels to separated destinations passing through nonadiabatic regions, such as conical intersections, and avoided crossings. CPEWT also applies to collision-induced ground-state water splitting dynamics catalyzed by Mn4CaO5 cluster. For the present photoinduced charge separation dynamics by Mn oxides, we identified a dynamical mechanism of charge recombination. It takes place by passing across nonadiabatic regions, which are different from those for charge separations and lead to the excited states of the initial state before photoabsorption. This article is an overview of our work on photoinduced charge separation and associated charge recombination with an additional study. After reviewing the basic mechanisms of charge separation and recombination, we herein studied substituent effects on the suppression of such charge recombination by doping auxiliary atoms. Our illustrative systems are X-Mn(OH)2 tied to N-methylformamidine, with X=OH, Be(OH)3, Mg(OH)3, Ca(OH)3, Sr(OH)3 along with Al(OH)4 and Zn(OH)3. We found that the competence of suppression of charge recombination depends significantly on the substituents. The present study should serve as a useful guiding principle in designing the relevant photocatalysts.

A case of double inferior vena cava with the connection to sacral venous plexus.

Double inferior vena cava (IVC) is known as a variation in which the additional IVC is found on the left side of the abdominal aorta. Their developmental process has been well documented, but the venous development around the lumbosacral region is controversial. In the present double IVC case, the left IVC entered the left renal vein at the L2 level, and the renal veins on each side flowed into the right IVC at the L1 level. The internal and external iliac veins were merged at the S1 level on each side. Besides, a venous communication (3-mm-width) was found horizontally between the internal iliac veins near their origin at the S1 level. It had also an extra narrow branch (1-mm-width), which ran obliquely upward and reached the left IVC at the level of L5. The median sacral artery (MSA) ran at the ventral side of the horizontal communication but at the dorsal side of its extra oblique branch. These results suggest that the oblique branch is a remnant of the anastomosis between the right and left posterior cardinal veins. Furthermore, the horizontal vein corresponds to the sacral venous plexus, suggesting that the anastomosis can be formed between the IVC and sacral venous plexus.

Psychological burden of attention-deficit/hyperactivity disorder traits on medical workers under the COVID-19 outbreak: a cross-sectional web-based questionnaire survey.

OBJECTIVES: There are numerous reports on the psychological burden of medical workers after the COVID-19 outbreak; however, no study has examined the influence of developmental characteristics on the mental health of medical workers. The objective of this study was to examine whether the developmental characteristics of medical workers are associated with anxiety and depression after the COVID-19 outbreak. DESIGN: We conducted an online cross-sectional questionnaire survey in October 2020. PARTICIPANTS AND SETTING: The data of 640 medical workers were analysed. The questionnaire included items on sociodemographic data, changes in their life after the COVID-19 outbreak and symptoms of depression, anxiety, attention-deficit/hyperactivity disorder (ADHD) traits and autism spectrum disorder traits. MAIN OUTCOMES: Depression symptoms were assessed by the Patient Health Questionnaire-9 and anxiety symptoms were assessed by the Generalised Anxiety Disorder-7. A series of hierarchical multiple regression analyses were performed to test the effects of developmental characteristics on depression and anxiety symptoms after controlling for sociodemographic factors and changes in participants' lives after the COVID-19 outbreak. RESULTS: Increases in physical and psychological burden were observed in 49.1% and 78.3% of the subjects, respectively. The results of a multiple regression analysis showed that ADHD traits were significantly associated with both depression (ß=0.390, p<0.001) and anxiety (ß=0.426, p<0.001). Autistic traits were significantly associated with depression (ß=0.069, p<0.05) but not anxiety. Increased physical and psychological burden, being female, medical workers other than physicians and nurses, fear of COVID-19 and experience of discrimination were also significantly associated with both depression and anxiety. CONCLUSION: Globally, the burden on medical workers increased. This study suggested that medical workers with higher ADHD traits may need special attention during the COVID-19 pandemic.

Local orientation of chains at crystal/amorphous interfaces buried in isotactic polypropylene thin films.

A better understanding of the aggregation states of polymer chains in thin films is of pivotal importance for developing thin film polymer devices in addition to its inherent scientific interest. Here we report the preferential orientation of the crystalline lamellae for isotactic polypropylene (iPP) in spin-coated films by grazing incidence of wide-angle X-ray diffraction in conjunction with sum frequency generation vibrational spectroscopy, which provides information on the local conformation of chains at crystal/amorphous interfaces buried in a thin film. The crystalline orientation of iPP, which formed cross-hatched lamellae induced by lamellar branching, altered from a mixture of edge-on and face-on mother lamellae to preferential face-on mother lamellae with decreasing thickness. The orientation of methyl groups at the crystal/amorphous interfaces in the interior region of the iPP films changed, accompanied by a change in the lamellar orientation.

Changes in pulse waveforms in response to intraocular pressure elevation determined by laser speckle flowgraphy in healthy subjects.

BACKGROUND: The influences of intraocular pressure (IOP) elevations on the pulse waveform in the optic nerve head (ONH) were evaluated using laser speckle flowgraphy (LSFG) in normal subjects. METHODS: This prospective cross-sectional study was conducted at the Nagoya University Hospital. An ophthalmodynamometer was pressed on the sclera to increase the IOP by 20 mmHg or 30 mmHg for 1 min (experiment 1, 16 subjects) and by 30 mmHg for 10 min (experiment 2, 10 subjects). The mean blur rate (MBR) and the eight pulse waveform parameters determined using LSFG were measured before, immediately after and during an IOP elevation, and after the IOP returned to the baseline pressure. RESULTS: A significant elevation in the IOP and a significant reduction in the ocular perfusion pressure (OPP) were found after applying the ophthalmodynamometer (both, P < 0.001). The blowout score (BOS) reduced significantly (P < 0.001), and the flow acceleration index (FAI; P < 0.01) and resistivity index (RI; P < 0.001) increased significantly immediately after increasing the IOP by 20 or 30 mmHg (experiment 1). The BOS reduced significantly (P < 0.001), and the FAI (P < 0.01) and RI (P < 0.001) increased significantly after the IOP elevation by 30 mmHg in both experiment 2 and 1. However, the BOS and RI recovered significantly at time 10 compared to that in time 0 (immediately after IOP elevation) during the 10-min IOP elevation (P < 0.001 and P = 0.008, respectively). CONCLUSIONS: In conclusion, the BOS, FAI, and RI of the pulse waveforms changed significantly with an acute elevation in the IOP. The change should be related to the larger difference between the maximum and minimum MBRs during the IOP elevation.

Rate-Determining Process at Electrode/Electrolyte Interfaces for All-Solid-State Fluoride-Ion Batteries.

Developing high-performance solid electrolytes that are operable at room temperature is one of the toughest challenges related to all-solid-state fluoride-ion batteries (FIBs). In this study, tetragonal ß-Pb0.78Sn1.22F4, a promising solid electrolyte material for mild-temperature applications, was modified through annealing under various atmospheres using thin-film models. The annealed samples exhibited preferential growth and enhanced ionic conductivities. The rate-determining factor for electrode/electrolyte interface reactions in all-solid-state FIBs was also investigated by comparing ß-Pb0.78Sn1.22F4 with representative fluoride-ion- and lithium-ion-conductive materials, namely, LaF3, CeF3, and Li7La3Zr2O12. The overall rate constant of the interfacial reaction, k0, which included both mass and charge transfers, was determined using chronoamperometric measurements and Allen-Hickling simulations. Arrhenius-type correlations between k0 and temperature indicated that activation energies calculated from k0 and ionic conductivities (σion) were highly consistent. The results indicated that the mass transfer (electrolyte-side fluoride-ion conduction) should be the rate-determining process at the electrode/electrolyte interface. ß-Pb0.78Sn1.22F4, with a large σion value, had a larger k0 value than Li7La3Zr2O12. Therefore, it is hoped that the development of high-conductivity solid electrolytes can lead to all-solid-state FIBs with superior rate capabilities similar to those of all-solid-state Li-ion batteries.

Impact of the Composition of Alcohol/Water Dispersion on the Proton Transport and Morphology of Cast Perfluorinated Sulfonic Acid Ionomer Thin Films.

The dispersion of perfluorinated sulfonic acid ionomers in catalyst inks is an important factor that controls the performance of catalyst layers in membrane electrode assemblies of polymer electrolyte fuel cells. Herein, the effects of water/alcohol compositions on the morphological properties and proton transport are examined by grazing incidence small-angle X-ray scattering, grazing incidence wide-angle X-ray scattering, and electrochemical impedance spectroscopy. The thin films cast by a high water/alcohol ratio Nafion dispersion have high proton conductivity and well-defined hydrophilic/hydrophobic phase separation, which indicates that the proton conductivity and morphology of the Nafion thin films are strongly influenced by the state of dispersion. This finding is expected to further understand the morphology and proton transport properties of Nafion thin films with different water/alcohol ratios, which has implications for the performance of the Pt/Nafion interface.