RESUMEN
Hydrothermal carbonization (HTC) for the recovery of phosphorus (P) from biomass wastes has attracted considerable attention, while migration of P to the liquid phase greatly weakened P recovery efficiency and elevated the environmental risk. Therefore, a systematic scheme was proposed in this work to accomplish the complete reclamation of P from wetland plant (Ceratophyllum demersum) through coupling liquid-recirculated HTC mediated by H2O or H2SO4 with precipitation, and the migration and speciation of P during this process was determined by P K-edge X-ray absorption near edge structure, 31P nuclear magnetic resonance, and the modified sequential extraction. The P concentration in the liquid phase increased with the recirculation of HTC process water, and reached up to 550.6 mg L-1. >98.1 % of P in the recirculated liquid products was recovered in the forms of hydroxyapatite and struvite with the HTC mediums of H2O and H2SO4, respectively, without the addition of exogenous metals. In addition to the production of P compounds, P-enriched hydrochar was simultaneously obtained during this process. The HTC medium and liquid recirculation had profound impact on the hydrochar characteristics and the transformation of P. Hydroxyapatite and magnesium phosphate were the dominant P species in the hydrochars derived from H2O-mediated HTC, while FePO4 and other Ca-P species [Ca3(PO4)2 and Ca(H2PO4)2] dominated the P compounds in the H2SO4-mediated hydrochar. These results suggest that coupling liquid-recirculated HTC and precipitation could be a promising strategy for P reclamation, which could provide new insights into the P recovery from biomass waste.
RESUMEN
Membrane filtration is a mainstream method for landfill leachate treatment, leaving the landfill leachate membrane concentrates (LLMCs) a high-toxicity residue. Conventional LLMCs disposal technology shows specific challenges due to the low biodegradability, high inorganic salts, and high heavy metal ions content of LLMCs. Therefore, it is necessary to degrade LLMCs with a more suitable technology. In this study, a special method was proposed to convert some organic chemicals into valuable compounds by aqueous phase reforming (APR). Ni-based catalysts (Ni//La2O3, Ni/CeO2, Ni/MgO, and Ni/Al2O3) were prepared to investigate the effect of different supports on the APR of LLMCs. APR performed outstanding characteristics in the decrease of chemical oxygen demand (COD) and total organic carbon (TOC), the degradation of macromolecules, and the removal of heavy metal ions in the aqueous phase. In addition, H2 was generated which is beneficial for energy compensating during the APR process. The best-performing catalyst (Ni/Al2O3) was selected to investigate the effects of reaction temperature, reaction time, and catalyst addition on product distribution. The optimal H2 selectivity (44.71%) and H2 production (11.63 mmol/g COD) were obtained at 250 °C with 2 g Ni/Al2O3 usage for 1 h. This paper provided a new perspective on the disposal of LLMCs, which will degrade pollutants efficiently.
RESUMEN
Oily sludge (OS) is a kind of hazardous waste generated from the petrochemical industry. Currently, pyrolysis has been widely applied for OS disposal, while low-oil content (<5 wt%) OS still lacks novel technology to achieve efficient resource utilization and harmful substances immobilization. In this study, a kind of OS-based geopolymer was developed by OS and ground granulated blast furnace slag (GGBS). The results showed that in geopolymer with 30 wt% OS, the content of total petroleum hydrocarbons (TPHs) decreased by 82%, Zn achieved 100% stabilization, and the 28 d compressive strength could still reach 32.8 MPa. The appropriate oil content filled the pores and cracks in geopolymer matrix. The constructed model compounds further elucidated the hydration mechanisms of OS-geopolymer. The nucleation effect of crude oil and micro-aggregate effect of minerals jointly improved the polymerization degree of C-(A)-S-H gels. OS promoted the transformation of [SiO4]4- monomers into C-(A)-S-H unbranched middle groups and three-dimensional networks, thereby efficiently stabilizing harmful substances. Sustainability analysis showed that OS-based geopolymer had good environmental and economic benefits. Overall, this work provides theoretical guidance for the green transformation of OS in the construction field.
RESUMEN
Highly active biochar has great application potential in heterogeneous catalysis and adsorptive processes. The complexity of carbonization process makes it difficult to construct target active sites. This work put forward a reactive descriptor based on pyrolysis parameters and intrinsic composition of biomass. Results show that the model showed better predictive performance for C-C/C=C (R2 = 0.85), C=O (R2 = 0.85) and defect (R2 = 0.91) sites. The SHapley Additive exPlanation analysis shows that the pyrolysis parameters and the higher heating values are equally important for the active sites. The predictive performance and guiding role of the descriptor were validated by experiments. The descriptors proposed in this study integrated significant advantages of simplicity and easy accessibility, which would break the bottleneck of accurate construction of active sites and provide a theoretical basis for high-value resource utilization of biomass.
Asunto(s)
Carbón Orgánico , Carbón Orgánico/química , Adsorción , Catálisis , Biomasa , PirólisisRESUMEN
With the rapid advancement of photopolymerization-based 3D printing technology, the volume of PCW has experienced a sharp increase. The potential environmental ramifications of PCW disposal demand careful consideration, especially given its current practice of being incineration alongside MSW. In this study, the TG-MS/FTIR system was carried out to probe the thermogravimetric characteristics and volatile byproducts during combustion. Various product compositions resulting from different mixing ratios of PCW incineration with MSW were investigated. It was observed that fluorene (C13H10) and triphenylene (C18H12) produced by PCW combustion 0.52 mg/g and 0.43 mg/g respectively, which are twice as abundant as those generated from normal plastic. When PCW incineration along with MSW, compounds such as naphthalene (C10H8), cyclohexane (C6H12), and heptane (C7H16) were generated in concentrations of 1.25 mg/g, 1.05 mg/g, and 0.95 mg/g respectively, which are at least twice as much as with MSW incineration alone. The incineration of PCW with rubber and textiles resulted in the production of 2.34 mg/g to 3.76 mg/g more PAHs compared to PCW combustion alone. The incineration of PCW with paper resulted in the production of 3.12 mg/g to 5.15 mg/g more heptane, nonane, cyclohexane, pyrene, and anthracene than PCW combustion alone. Incineration of PCW with wood proved to be the cleanest method, with product contents primarily below 0.10 mg/g. When incinerated with food residues or normal plastic, most of the product content remained below 0.05 mg/g. Considering the environmental pollution resulting from PCW combustion, the disposal of PCW warrants careful consideration and management.
Asunto(s)
Incineración , Hidrocarburos Policíclicos Aromáticos , Impresión Tridimensional , Incineración/métodos , Hidrocarburos Policíclicos Aromáticos/análisis , Eliminación de Residuos/métodos , Fluorenos/química , Contaminantes Ambientales/análisisRESUMEN
Cleanliness has been paramount for municipal solid waste incineration (MSWI) systems. In recent years, the rapid advancement of intelligent technologies has fostered unprecedented opportunities for enhancing the cleanliness of MSWI systems. This paper offers a review and analysis of cutting-edge intelligent technologies in MSWI, which include process monitoring, intelligent algorithms, combustion control, flue gas treatment, and particulate control. The objective is to summarize current applications of these techniques and to forecast future directions. Regarding process monitoring, intelligent image analysis has facilitated real-time tracking of combustion conditions. For intelligent algorithms, machine learning models have shown advantages in accurately forecasting key process parameters and pollutant concentrations. In terms of combustion control, intelligent systems have achieved consistent prediction and regulation of temperature, oxygen content, and other parameters. Intelligent monitoring and forecasting of carbon monoxide and dioxins for flue gas treatment have exhibited satisfactory performance. Concerning particulate control, multi-objective optimization facilitates the sustainable utilization of fly ash. Despite remarkable progress, challenges remain in improving process stability and monitoring instrumentation of intelligent MSWI technologies. By systematically summarizing current applications, this timely review offers valuable insights into the future upgrade of intelligent MSWI systems.
RESUMEN
Malignant invasive Erigeron canadensis, as a typical lignocellulosic biomass, is a formidable challenge for sustainable and efficient resource utilization, however nanobubble water (NBW) coupled with anaerobic digestion furnishes a prospective strategy with superior environmental and economic effectiveness. In this study, influence mechanism of various O2-NBW addition times on methanogenic performance of E. canadensis during anaerobic digestion were performed to achieve the optimal pollution-free energy conversion. Results showed that supplementation of O2-NBW in digestion system could significantly enhance the methane production by 10.70-16.17%, while the maximum cumulative methane production reached 343.18 mL g-1 VS in the case of one-time O2-NBW addition on day 0. Furthermore, addition of O2-NBW was conducive to an increase of 2-90% in the activities of dehydrogenase, α-glucosidase and coenzyme F420. Simultaneously, both facultative bacteria and methanogenic archaea were enriched as well, further indicating that O2-NBW might be responsible for facilitating hydrolytic acidification and methanogenesis. Based on Kyoto Encyclopedia of Genes and Genomes (KEGG) cluster analysis, provision of O2-NBW enhanced the metabolism of carbohydrate and amino acid, translation as well as membrane transport of bacteria and archaea. This study might offer the theoretical guidance and novel insights for efficient recovery of energy from lignocellulosic biomass on account of O2-NBW adhibition in anaerobic digestion system, progressing tenor of carbon-neutral vision.
Asunto(s)
Erigeron , Anaerobiosis , Agua , Bacterias , Archaea , Suplementos Dietéticos , Metano , Reactores Biológicos , Aguas del Alcantarillado/químicaRESUMEN
Biochar is a promising sorbent for Cd removal from water, while the disposal of the exhausted Cd-enriched biochar remains a challenge. In this study, pyrolysis was employed to treat the exhausted biochar under N2 and CO2 atmospheres at 600-900 °C, and the fate of Cd during pyrolysis and characteristics of high-valued products were determined. The results indicated that higher temperature and CO2 atmosphere favored the volatilization of Cd. Based on the toxicity characteristic leaching procedure (TCLP) results, the pyrolysis treatment under both atmospheres enhanced the stability of Cd, and the leached Cd concentration of regenerated biochar obtained at high temperatures (>800 °C) was lower than 1 mg/L. Compared with the pristine biochar, the regenerated biochar demonstrated higher carbon content and pH, whereas the contents of oxygen and hydrogen declined, and exhibited promising sorption properties (35.79 mg/g). The atmosphere played an important role in modifying biochar properties and syngas composition. The N2 atmosphere facilitated CH4 production, whereas the CO2 atmosphere increased the proportion of CO. These results implied that pyrolysis can be a valuable and environmental-friendly strategy for the treatment and reuse of exhausted biochar sorbent.
Asunto(s)
Cadmio , Pirólisis , Dióxido de Carbono , Carbón Orgánico/químicaRESUMEN
Heterogeneity of pyrolytic parameters in municipal solid waste (MSW) significantly hinders its waste-to-energy efficiency. So far, hardly any light has been shed on current pyrolytic heterogeneity conditions or feasible pyrolytic homogeneity enhancement approaches of MSW. Accordingly, pyrolytic properties (Ea and logA) of 130 MSW samples in 6 categories were collected from literature. A kinetic parameters clustering-based sorting strategy for MSW was proposed. A so-called C index was established to compare their sorting performance for Ea and logA against two traditional sorting strategies (substance categorization and density clustering). Results showed that the proposed sorting strategies outperformed the traditional ones in pyrolytic homogeneity enhancement, where the optimal C_Ea and C_logA reached 1578.30 kJ/mol and 93.11 -log min. Among investigated clustering methods, k-means clustering outperformed hierarchical clustering, which could be attributed to its adaptability to the sample structure. Future perspectives involving data set expansion, model framework development, and downstream technologies matching were also discussed. The index C established in this study can be used to evaluate other clustering models.
Asunto(s)
Pirólisis , Residuos Sólidos , Análisis por Conglomerados , Cinética , TecnologíaRESUMEN
Staphylococcus aureus (S. aureus) is a leading cause of bacteremia and blood stream infections. Methicillin-resistant S. aureus (MRSA) that first appeared in 1961 often caused hospital-acquired infections (HAIs) and community-acquired infections (CAIs) and was associated with high mortality rate. Accurate and rapid point-of-care testing (POCT) of MRSA is crucial for clinical management and treatment of MRSA infections, as well as the prevention and control of HAIs and CAIs. Here, we reported a novel extraction-free dual HiFi-LAMP assay for discriminative detection of methicillin-susceptible S. aureus and MRSA. The dual HiFi-LAMP assay can detect 30 copies/reaction of nuc and mecA genes with detection limits of 147 and 158 copies per 25 µL reaction, respectively. A retrospective clinical evaluation with 107 clinical S. aureus isolates showed both sensitivity and specificity of 100%. A prospective clinical evaluation with 35 clinical samples revealed a specificity of 100% and a sensitivity of 92.3%. The dual HiFi-LAMP assay can detect almost all S. aureus samples (141/142; 99.3%) within 20 min, implying that the entire HiFi-LAMP assay (including sample process) can be completed within 40 min, extremely significantly shorter than 3-5 days by the traditional clinical microbial culture and antibiotic susceptibility testing. The novel extraction-free dual HiFi-LAMP assay can be used as a robust POCT tool to promote precise diagnosis and treatment of MRSA infections in hospitals and to facilitate surveillance of MRSA at hospital and community settings.IMPORTANCEMethicillin-resistant Staphylococcus aureus (MRSA) was associated with high mortality rate and listed as a "priority pathogen" by the World Health Organization. Accurate and rapid point-of-care testing (POCT) of MRSA is critically required for clinical management and treatment of MRSA infections. Some previous LAMP-based POCT assays for MRSA might be questionable due to their low specificity and the lack of appropriate evaluation directly using clinical samples. Furthermore, they are relatively tedious and time-consuming because they require DNA extraction and lack multiplex detection capacity. Here, we reported a novel extraction-free dual HiFi-LAMP assay for discriminative detection of MRSA and methicillin-susceptible S. aureus. The assay has high specificity and sensitivity and can be completed within 40 min. Clinical evaluation with real clinical samples and clinical isolates showed excellent performance with 100% specificity and 92.3%-100% sensitivity. The novel extraction-free assay may be a robust POCT tool to promote precise diagnosis of MRSA infections and facilitate surveillance of MRSA at hospital and community settings.
Asunto(s)
Infección Hospitalaria , Staphylococcus aureus Resistente a Meticilina , Técnicas de Diagnóstico Molecular , Técnicas de Amplificación de Ácido Nucleico , Infecciones Estafilocócicas , Humanos , Staphylococcus aureus Resistente a Meticilina/genética , Meticilina , Staphylococcus aureus/genética , Estudios Prospectivos , Estudios Retrospectivos , Proteínas Bacterianas/genética , Infecciones Estafilocócicas/diagnóstico , Infecciones Estafilocócicas/epidemiología , Antibacterianos/farmacología , Antibacterianos/uso terapéutico , Pruebas de Sensibilidad MicrobianaRESUMEN
Excavated waste is a byproduct of microbial decomposition and fermentation following landfill disposal. The effective management and utilization of excavated waste offer broad prospects for environmental and resource protection, as well as economic growth. While current research predominantly focuses on plastics in landfills, the physico-chemical properties of excavated waste over extended landfilling time remain unclear. This study aimed to address this gap by excavating waste from a landfill in Tianjin, China, with a maximum landfilling time of 18 years. The findings revealed that, compared to municipal solid waste (MSW), the excavated waste exhibited increased calorific value, ash content, and fixed carbon content after screening the landfill-mined-soil-like-fine fraction. The average calorific value of the excavated waste could reach 57.8 MJ/kg. Additionally, the oxygen content in the excavated combustible waste exceeded that of MSW, increasing from 25.59 % to 34.22 %. This phenomenon is potentially linked to the oxidation of attached soil impurities and waste. The study identified polyethylene (PE), polypropylene (PP), expanded polystyrene (EPS), polyethylene terephthalate (PET), and wood as the primary combustible components. Notably, the excavated waste exhibited a significant decrease in surface gloss, adopting a rough texture with apparent holes, potentially attributed to the acidification and corrosion of organic matter during fermentation. Nevertheless, the breaking of molecular bonds could also contribute to waste fragmentation. Furthermore, an increase in landfilling time resulted in a more pronounced decrease in mechanical properties. For instance, the failure load of PE decreased from 15.61 N to 6.46 N, and PET reduced from 884.83 N to 186.56 N. The chemical composition of excavated waste has changed, with -OH and CO observed in PE with an 18-year landfilling time. In conclusion, these results provide a theoretical foundation for the recycling of excavated waste and contribute to the advancement of waste management and recycling technologies.
RESUMEN
The loss of active components, weak acid resistance, and low recover efficiency of common Ca-based catalysts limited its further development and application. In this study, to effectively produce biodiesel from waste cooking oil (WCO), a green and recyclable magnetic acid-base bifunctional CoFe/biochar/CaO catalyst was prepared from sargassum and river snail shell waste via hydrothermal method. The catalysts' structure and properties were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), CO2/NH3 temperature programmed desorption (CO2/NH3 TPD), etc., The prepared catalyst mainly consisted of the carbon skeleton, CoFe alloy, and CaO. CoFe alloy provided catalyst's ferromagnetism for magnetic separation as well as acid sites for transesterification of WCO. Ca and other metal species with nanoscale (â¼5.64 nm) were dispersively anchored on sargassum biochar surface, thereby leading to good catalytic activity (99.21% biodiesel yield) and stability (91.70% biodiesel yield after the 5th cycle). In addition, response surface methodology-Box-Behnken design (RSM-BBD) revealed the optimal operational conditions were 16:1 methanol/oil molar ratio, 3 wt% catalyst dosage, 73 °C for 157 min. The maximum biodiesel yield predicted value was 98.29% and the experimental value was 99.21%, indicating good satisfaction of the established model. Moreover, the quality of WCO biodiesel met the ASTM D6751 standards. This study benefits magnetic waste-derived acid-base bifunctional catalysts for the disposal of WCO towards sustainable biodiesel production.
Asunto(s)
Biocombustibles , Carbón Orgánico , Aceites de Plantas , Aceites de Plantas/química , Biocombustibles/análisis , Dióxido de Carbono , Esterificación , Culinaria , Catálisis , Aleaciones , Fenómenos MagnéticosRESUMEN
ETHNOPHARMACOLOGICAL RELEVANCE: Qingjin Huatan Decoction (QJHTT) consists of 11 herbal medicines: Scutellaria baicalensis Georgi, Gardenia jasminoides J. Ellis, Platycodon grandiflorus (Jacq.) A. DC., Ophiopogon japonicus (Thunb.) Ker Gawl., Morus alba L., Fritillaria thunbergii Miq., Anemarrhena asphodeloides Bunge, Trichosanthes kirilowii Maxim., Citrus reticulata Blanco, Poria cocos (Schw.) Wolf, and Glycyrrhiza uralensis Fisch. As a traditional Chinese medicinal formula, QJHTT has been used for more than 400 years in China. It has shown promising results in treating influenza A virus (IAV) pneumonia. AIM OF THE STUDY: To elusive the specific pharmacological constituents and mechanisms underlying its anti-IAV pneumonia effects. MATERIALS AND METHODS: The components in QJHTT were analyzed through the use of a serum pharmacology-based ultra high-performance liquid chromatography Q- Exactive Orbitrap mass spectrometry (UHPLC-Q Exactive Orbitrap-MS) method. Simultaneously, the dynamic changes in IAV-infected mouse lung viral load, lung index, and expression of lung inflammation factors were monitored by qRT-PCR. RESULTS: We successfully identified 152 chemical components within QJHTT, along with 59 absorbed chemical prototype constituents found in the serum of mice treated with QJHTT. 43.45% of these chemical components and 43.10% of the prototype constituents were derived from the monarch drugs, namely Huangqin and Zhizi, aligning perfectly with traditional Chinese medicine theory. Notably, our analysis led to the discovery of 14 compounds within QJHTT for the first time, three of which were absorbed into the bloodstream. Simultaneously, we observed that QJHTT not only reduced the viral load but also modulated the expression of inflammation factors in the lung tissue including TNF-α, IL-1ß, IL-4, IL-6, IFN-γ, and IL17A. A time-effect analysis further revealed that QJHTT intervention effectively suppressed the peak of inflammatory responses, demonstrating a robust anti-IAV pneumonia effect. CONCLUSIONS: We comprehensively analyzed the pharmacological material basis of QJHTT by a highly sensitive and high-resolution UHPLC-Q Exactive Orbitrap-MS method, and demonstrated its efficacy in combating IAV pneumonia by reducing lung viral load and inflammatory factors. This study has significant importance for elucidating the pharmacological basis and pharmacological mechanism of QJHTT in combating IAV pneumonia.