The effect of mix-milling with P2O5 on cellulose physicochemical properties responsible for increased glucose yield.

Breaking the recalcitrant structure of native crystalline cellulose is an energy demanding rate liming step in the production of glucose from cellulosic biomass. Mix-milling of lignocellulosic substrates (with P2O5) dramatically increased glucose yield. In this work, the changes of physicochemical characteristics (morphology, structure, degree of polymerization (DP), solubility) of cellulose during mix-milling (with P2O5) are correlated with glucose yield in the subsequent chemical hydrolysis process. The mix-milling enables highly efficient breakdown of cellulose I crystalline to smaller amorphous particles with low DP, which is recrystallized into cellulose II structure after water-wetting. As a result, the mix-milled cellulose (MMC) shows higher hydrolysis reactivity than that of single-milled cellulose (SMC). The results showed that small particle size, low DP, higher solubility and cellulose II content are correlated with the hydrolysis reactivity of cellulose.

Mechanistic understanding of humin formation in the conversion of glucose and fructose to 5-hydroxymethylfurfural in [BMIM]Cl ionic liquid.

Humin formation is one of the key issues that hinders economical 5-HMF production from hexose sugars such as glucose and fructose. In this work, the mechanism of humin formation in glucose/fructose conversion to HMF was studied in an ionic liquid system (1-butyl-3-methylimidazolium chloride, [BMIM]Cl) with CrCl3 as the catalyst. Elemental analysis, XRD, FT-IR, and TEM were applied to study the molecular structure and morphology of the solid humins. The possible intermediates to form solid humins were investigated by HPLC-MS. We synthesized furanic model compounds that mimic the experimentally identified humin intermediates to investigate the mechanism of humin growth at an early stage. The results showed that a furan compound bearing a hydroxymethyl and an electron-donating group was unstable due to three types of reactions: (1) bimolecular ether formation reactions; (2) intermolecular addition reaction; (3) furan ring opening reaction with water. The stability of a furan compound in [BMIM]Cl was increased when the hydroxymethyl group of a furan compound was protected by a methyl group, and the stability was further enhanced with an additional electron-withdrawing group (such as an aldehyde group) on the furan ring. Protecting the hydroxymethyl group of 5-HMF with a methyl group allows easy separation of the products from the [BMIM]Cl solvent through extraction.

Genesis of electron deficient Pt1(0) in PDMS-PEG aggregates.

While numerous single atoms stabilized by support surfaces have been reported, the synthesis of in-situ reduced discrete metal atoms weakly coordinated and stabilized in liquid media is a more challenging goal. We report the genesis of mononuclear electron deficient Pt1(0) by reducing H2PtCl6 in liquid polydimethylsiloxane-polyethylene glycol (PDMS-PEG) (Pt1@PDMS-PEG). UV-Vis, far-IR, and X-ray photoelectron spectroscopies evidence the reduction of H2PtCl6. CO infrared, and 195Pt and 13C NMR spectroscopies provide strong evidence of Pt1(0), existing as a pseudo-octahedral structure of (R1OR2)2Pt(0)Cl2H2 (R1 and R2 are H, C, or Si groups accordingly). The weakly coordinated (R1OR2)2Pt(0)Cl2H2 structure and electron deficient Pt1(0) have been validated by comparing experimental and DFT calculated 195Pt NMR spectra. The H+ in protic state and the Cl- together resemble HCl as the weak coordination. Neutralization by a base causes the formation of Pt nanoparticles. The Pt1@PDMS-PEG shows ultrahigh activity in olefin hydrosilylation with excellent terminal adducts selectivity.

Structural Dependence and Spectroscopic Evidence of Methane Dissolution in Ionic Liquids.

High methane dissolution capacity in a liquid is important for methane storage and transformation. In this work, methane solubility in different ionic liquids (ILs) was studied and was found associated with IL's structural and physical properties. In imidazolium-based ILs, ILs containing C-F and long alkyl chain showed high methane solubility mainly due to lower surface tension and molar density. Reducing the surface tension of solvent by adding 0.16 mol of trimethyl-1-propanaminium iodide (FC-134) with respect to [Bmim][NTf2] increased methane solubility by 39.3%. In situ high-pressure attenuated total reflection Fourier transform infrared spectroscopic results indicated a reversible process of methane dissolution in the ILs. The antisymmetric C-H stretching band of dissolved methane in ILs showed highly prominent rotational-vibrational bands with high intensity and narrow half-peak width compared to gaseous methane. Induced interaction between methane and IL resulted in increased dipole variation strength and reduced methane molecular symmetry. The constant antisymmetric C-H stretching peak at 3016.85 cm-1 revealed an unconstrained methane rotation in the stable physical and chemical environment of IL. Methane insertion into the IL's intranetwork space needs activation energy to overcome the interaction of cation-anion network. Kinetic analysis of methane in [Bmim][NTf2] and [Bmim][HSO4] at different temperatures indicated that methane dissolution in these two ILs was a reversible first-order and very weak endothermic process and that methane dissolution required high activation energy in ILs with stronger cation-anion interaction.

Synthesis of Bis(hydroxylmethylfurfuryl)amine Monomers from 5-Hydroxymethylfurfural.

We report the synthesis of bis(hydroxylmethylfurfuryl)amine (BHMFA) from 5-hydroxymethylfurfural (5-HMF) by reacting 5-HMF with primary amines in the presence of homogeneous Ru(II) catalysts having sterically strained ligands. BHMFA is a group of furan-based monomers that offer great potential to form functional biopolymers with tunable properties. A range of primary amines, such as aliphatic and benzyl amines, are readily converted with 5-HMF to form the corresponding BHMFA in good yields. The reaction proceeds through reductive amination of 5-HMF with primary amine to form secondary amine, followed by reductive amination of 5-HMF with in situ generated secondary amine to produce BHMFA.

Lignocellulosic ethanol production by starch-base industrial yeast under PEG detoxification.

Cellulosic ethanol production from lignocellulosic biomass offers a sustainable solution for transition from fossil based fuels to renewable alternatives. However, a few long-standing technical challenges remain to be addressed in the development of an economically viable fermentation process from lignocellulose. Such challenges include the needs to improve yeast tolerance to toxic inhibitory compounds and to achieve high fermentation efficiency with minimum detoxification steps after a simple biomass pretreatment. Here we report an in-situ detoxification strategy by PEG exo-protection of an industrial dry yeast (starch-base). The exo-protected yeast cells displayed remarkably boosted vitality with high tolerance to toxic inhibitory compounds, and with largely improved ethanol productivity from crude hydrolysate derived from a pretreated lignocellulose. The PEG chemical exo-protection makes the industrial S. cerevisiae yeast directly applicable for the production of cellulosic ethanol with substantially improved productivity and yield, without of the need to use genetically modified microorganisms.

[The influence of different alkaline pH conditions on Enterococcus faecalis in planktonic and biofilm mode].

PURPOSE: To study the influence of different pH conditions on Enterococcus faecalis(E. faecalis) in planktonic and biofilm mode. METHODS: E. faecalis were prepared in planktonic and biofilm mode and cultured in TSB mediums 2 hours at pH 7,8,9,10,11 and 12. MTT assays were applied to evaluate the survival rate of bacterial cells in different pH value. SAS 6.12 software package was used for statistical analysis. RESULTS: Mild alkaline mediums (pH7-9) had no effect on cell vitality of E. faecalis and high alkaline condition (pH>10) led to significant declines of survival rate of cells. The biofilm cells of E. faecalis were more alkaline tolerant than corresponding planktonic cells. CONCLUSION: Biofilm formation is an important step in the development of alkaline tolerance of E. faecalis.

Low-temperature heat capacities of 1-alkyl-3-methylimidazolium bis(oxalato)borate ionic liquids and the influence of anion structural characteristics on thermodynamic properties.

Two chelated orthoborate ionic liquids (ILs), 1-butyl-3-methylimidazolium bis(oxalato)borate ([Bmim][BOB]) and 1-hexyl-3-methylimidazolium bis(oxalato)borate ([Hmim][BOB]), were prepared and characterized. Their thermodynamic properties were studied using adiabatic calorimetry and differential scanning calorimetry (DSC). The thermodynamic properties of the two ILs were evaluated and compared with each other, and then with those of other [Bmim] type ILs. The results clearly indicate that for a given cation (or anion) and at a certain temperature, the more atoms in the anion (or cation), the higher the heat capacity; the higher glass-transition temperatures of [BOB] type ILs than others are mainly caused by the higher symmetry of the orthoborate anion structure. It is suggested that a high content of strong electronegative atoms and C(n) or C(nv) (n = 1,2,3,…,∞) point group symmetry in the anion are favorable for the design and synthesis of room temperature ILs with a wide liquid range.

Chelated orthoborate ionic liquid as a reactant for the synthesis of a new cobalt borophosphate containing extra-large 16-ring channels.

1-Ethyl-3-methylimidazolium bis(oxalato)borate ([Emim][BOB]), a room-temperature ionic liquid, has been prepared and used for the first time to develop new borate-containing material. A new open-framework cobalt borophosphate, (NH(4))(7)Co(4)(H(2)O)[B(2)P(4)O(15)(OH)(2)](2)[H(2)PO(4)][HPO(4)], with peanut shaped extra-large 16-ring channels has been obtained.

[RP-HPLC determination of tiliroside in Daphne genkwa].

OBJECTIVE: To determine the contents of tiliroside [kaempferol 3-O-beta-D-(6 " -p-coumaroyl) glucopyranoside] in the Daphne genkwa. METHOD: The separation was performed on ZORBAX XDB C18 column (4.6 mm x 250 mm, 5 microm), using acetonitrile and water/acetic acid mixture (1,000/1) (gradient elution: 0-18 min, 26 : 74; 18-33 min, 80 : 20) as mobile phase with the rate of 1.0 mL x min(-1) at 25 degrees C, the wavelength for measurement was 310 nm. RESULT: The linearity was in the range of 0.1-5.0 microg (n=6), and the correlation coefficient was 0.9999. The average recovery for compound tiliroside was 101.50% (RSD 0.90%) (n=6). CONCLUSION: This method is accurate, reliable and reproducible to determine tiliroside in the D. genkwa.

[Quantitative evaluation of residual endodontic microorganisms after mechanical root canal preparation different chemical preparations by real-time PCR].

PURPOSE: To establish a quick, sensitive method for quantifying root canal flora and investigate the effects of different root canal preparations on the pathogenic bacteria at RNA level. METHODS: A total of 24 single-rooted teeth with chronic apical periodontitis were selected and prepared using 3% H2O2 combined with 1% NaClO, EDTA combined with 3% H(2)O(2),1% NaClO, respectively,the samples were taken before and after root canal preparation. After isolation of total RNA from the root canal samples, cDNA was synthesized by reverse transcription, and detected by real-time PCR. The data were analyzed with SAS 6.12 software package. RESULTS: The number of bacteria in the root canal reduced dramatically after mechanical preparation and irrigated using 3% H(2)O(2) and 1% NaClO(P<0.01). Further combined with EDTA, its effect was better than that of simply irrigated using 3% H(2)O(2) and 1% NaClO(P<0.05). CONCLUSIONS: Real-time PCR can be employed in the identification of bacteria flora in the root canal, both methods of root canal preparation can effectively reduce the number of bacteria flora.

[Quantitive study of interleukin 1beta in periapical exudates of chronic periapical periodontitis in the course of root canal therapy].

PURPOSE: To evaluate the relationship between IL-1beta and clinical findings of chronic apical periodontitis and to explore the function of IL-1beta during the endodontic interappointment flare-ups. METHODS: Periapical exudates samples were obtained from 19 teeth suffering from endodontic flare-ups after root canal preparation and 20 teeth without any symptoms and signs at the second visit after root canal preparation. The levels of IL-1beta were determined by ELISA and the data was analyzed by SAS6.12 software package. RESULTS: Significantly higher levels of IL-1beta were found in periapical exudates from teeth suffering from endodontic flare-ups than that before canal preparation(P<0.001). The mean IL-1beta levels significantly decreased following the endodontic therapy if there were no symptom at the second visit (P<0.001). CONCLUSION: The level of IL-1beta in the exudates of root canals were related with the exist of infection which might take an active part in the occurrence of endodontic interappointment flare-up.