Transition-Metal-Free One-Pot Synthesis of Fused Benzofuranamines and Benzo[b]thiophenamines.

A series of benzofuran and benzo[b]thiophen derivatives was synthesized via a transition-metal-free one-pot process at room temperature. This one-pot protocol enables the synthesis of compounds with high reaction efficiency, mild conditions, simple methods, and a wide-ranging substrate scope. Regioselective five-membered heterocycles were constructed in good-to-excellent yields.

A Direct Method for Synthesis of Quinoxalines and Quinazolinones Using Epoxides as Alkyl Precursor.

An iodine-mediated one-pot synthesis of pyrrolo/indolo [1,2-a]quinoxalines and quinazolin-4-one via utilizing epoxides as alkyl precursors under metal-free conditions has been described. Both 1-(2-aminophenyl)-pyrrole and 2-aminobenzamide could be applied to this protocol. A total of 33 desired products were obtained with moderate to good yields. This methodology was suitable for wide-scale preparation and the obtained products could be further modified into promising pharmaceutically active reagents.

Synthesis and Performance Testing of Maleic Anhydride-Ene Monomers Multicomponent Co-Polymers as Pour Point Depressant for Crude Oil.

To address the issue of pipeline blockage caused by the formation of waxy deposits inside pipelines, hindering the flow of petroleum in the Shengli oilfield, eight new-style polyacrylic acid pour point depressants (PPD) for Shengli crude oil were prepared by maleic anhydride and ene monomers with different polar and aromatic pendant chains. The synthesized Pour Point Depressants were characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), gel permeation chromatography (GPC), and polarizing optical microscopy (POM). The results were promising and demonstrated that any type of pour point depressant exhibited excellent performance on high-pour-point crude oil. The reduction in pour-point after additive addition was largely dependent on the polymer structure. Notably, polymers containing long alkyl side chains and aromatic units displayed the most impressive performance, capable of depressing the pour point by 12 °C.

Regioselective Synthesis of N-Vinyl Pyrazoles from Vinyl Sulfonium Salts with Diazo Compounds.

Herein, we develop a base-promoted regioselective synthesis of N-vinyl pyrazoles from vinyl sulfonium salts with diazo compounds. This metal-free synthetic protocol provides an efficient and practical approach to diverse N-vinyl pyrazoles in good to excellent yields under mild conditions. The reaction appears to experience a [3 + 2] annulation of vinyl sulfonium salts and diazo anions rather than diazo compounds, followed by N-vinylation.

Oxidant-Free Electrochemical Direct Oxidative Benzyl Alcohols to Benzyl Aldehydes Using Three-Dimensional Printing PPAR Polyoxometalate.

The oxidation of benzyl alcohols is an important reaction in organic synthesis. Traditional methods for benzyl alcohol oxidation have not been widely utilized due to the use of significant amounts of precious metals and environmentally unfriendly reagents. In recent years, electrocatalytic oxidation has gained significant attention, particularly electrochemical anodic oxidation, which offers a sustainable alternative for oxidation without the need for external oxidants or reducing agents. Here, a copper monosubstituted phosphotungstate-based polyacrylate resins (Cu-LPOMs@PPAR) catalyst has been fabricated with immobilization and recyclability using 3D printing technology that can be successfully applied in the electrocatalytic oxidation of benzyl alcohol to benzaldehyde, achieving atom economy and reducing pollution. In this protocol, we obtain benzaldehyde in good yields with excellent functional group toleration under metal-free and oxidant-free conditions. This strategy could provide a new avenue for heterogeneous catalysts in application for enhancing the efficiency and selectivity of electrocatalytic oxidation processes.

Efficient interlayer confined nitrate reduction reaction and oxygen generation enabled by interlayer expansion.

Electrochemically converting nitrate ions back to ammonia can not only eliminate water pollution but also obtain valuable ammonia without a serious carbon footprint, and is thus deemed as an efficient supplement to the traditional Haber-Bosch process. Currently reported catalysts can achieve a single electrode reaction in the electrochemical nitrate reduction reaction. However, the bifunctionality of a single catalyst for both cathodic and anodic reactions has not yet been reported. Herein, we report Fe-doped layered α-Ni(OH)2 with expanded interlayer spacing as an efficient bifunctional catalyst for the nitrate reduction reaction and oxygen evolution reaction. The expanded interlayer spacing facilitates in situ electrochemical potassium ion intercalation between layers. In situ Raman spectroscopy characterization confirms that both the nitrate reduction reaction and oxygen evolution reaction are confined between layers and are triggered by the accumulation of potassium ions. The obtained α-Ni0.881Fe0.119(OH)2 nanosheets deliver an ammonia yield rate of 8.1 mol gcat.-1 h-1 with a NO3--to-NH3 faradaic efficiency of 97.5% at the cathode. The overpotential of oxygen generation at 10 mA cm-2 is reduced to 254 mV at the anode. As a bifunctional catalyst in overall electrolysis, the current density of α-Ni0.881Fe0.119(OH)2 reaches 24.8 mA cm-2 at a voltage of 2.0 V and performs continuously for 50 h with a current retention of 80.2%.

"One-Pot" CuCl2-Mediated Condensation/C-S Bond Coupling Reactions to Synthesize Dibenzothiazepines by Bi-Functional-Reagent N, N'-Dimethylethane-1,2-Diamine.

The efficient "One-pot" CuCl2-catalyzed C-S bond coupling reactions were developed for the synthesis of dibenzo[b,f][1,4]thiazepines and 11-methy-ldibenzo[b,f][1,4]thiazepines via 2-iodobenzaldehydes/2-iodoacetophenones with 2-aminobenzenethiols/2,2'-disulfanediyldianilines by using bifunctional-reagent N, N'-dimethylethane-1,2-diamine (DMEDA), which worked as ligand and reductant. The reactions were compatible with a range of substrates to give the corresponding products in moderate to excellent yields.

Metal- and oxidant-free electrochemically promoted oxidative coupling of amines.

The selective oxidation of amines into imines is a priority research topic in organic synthesis and has attracted much attention over the past few decades. However, the oxidation of amines generally suffers from the drawback of transition-metal, even noble-metal catalysts. Thus, the strategy of metal- and oxidant-free selective synthesis of imines is highly desirable yet largely unmet. This paper unravels a metal-free and external oxidant-free electrochemical strategy for the oxidative coupling methodology of amines. This general transformation is compatible with various functional amines and led to functionalized imines in moderate to satisfactory yields.

Simultaneous removal of NOx and SO2 with H2O2 over silica sulfuric acid catalyst synthesized from fly ash.

Considering that the utilization of fly ash in the removal of flue gas pollutants not only provide a way of high value-added utilization of fly ash, but also greatly reduce the cost of removing flue gas pollutant, the synthesis of silica sulfuric acid catalyst from fly ash and its application in simultaneous removal of NOx and SO2 with H2O2 were investigated in this work. Circulating fluidized bed boiler (CFB) fly ash and pulverized coal boiler (PC) fly ash were selected as raw material to prepare silica sulfuric acid catalyst by H2SO4 activation. PC fly ash was difficult to be activated by H2SO4 due to its dense structure, while CFB fly ash could be treated with H2SO4 to promote dealumination, thereby increasing the silica content. Moreover, the -SO3H withdrawing groups were detected on the silica surface by XPS and Py-FTIR technologies, indicating the formation of silica sulfuric acid. Silica sulfuric acid showed higher activity in catalyzing the NO oxidation by H2O2, and a possible reaction mechanism was proposed. Combined with alkali absorption, 99% SO2 and 92% NOx removal efficiencies can be achieved. The effects of activation conditions such as activation temperature, activation time and calcination temperature and removal experimental parameters such as H2O2 concentration, SO2 concentration and simulated flue gas temperature on the catalytic performance were studied. Finally, the catalyst was not found to be deactivated for ten hours in the stability test.

The roles of Brønsted acidity in low-temperature catalytic oxidation of NO over acidic zeolites with H2O2.

In this study, low-temperature catalytic NO oxidation with H2O2 over Na- and H-exchanged Y and ZSM-5 zeolites was investigated at 140 °C which is the average exhaust temperature of coal-fired power plant. Fast catalytic NO oxidation rates were observed over H-zeolites, and catalytic activity was proportional to the amount of Brønsted acid sites. HZSM-5 and HY zeolites show 65% and 95% NO removal efficiency, respectively, but the catalytic stability of HY was lower than HZM-5 due to partial dealumination during the reaction. In-situ DRIFTS analysis showed that NO+ species coordinated at framework sites played a direct role in the catalytic NO oxidation. Moreover, the possible reaction pathway was proposed to elucidate the mechanism of NO oxidation with H2O2 catalyzed over Brønsted acid sites. The effect of reaction temperature, H2O2 concentration, H2O2 flow and SO2 concentration on NO oxidation were investigated over H-zeolites. The experimental results indicated that the NO removal efficiency was increased with the increase of H2O2 concentration, but decreased with the increase of SO2 concentration. The NO removal efficiency first increased and then decreased with the increase of H2O2 flow and reaction temperature.

Design and Synthesis of a Novel Banana-Shaped Functional Molecule via Double Cross-Coupling.

A novel banana-shaped molecule using 2,8-Dimethyl-6H,12H-5,11-methanodibenzo [b,f] [1,5]diazocine (Tröger's base) as bent-core was synthesized via double Carbon-Carbon cross-coupling reaction. The double Sonogashira cross-coupling reaction was optimized by using Pd(PPh3)2Cl2 as catalyst, CuI as cocatalyst and diisopropylamine as base in place of triethylamine. The structure of this compound was confirmed by ¹H-NMR, 13C-NMR, Fourier transform infrared (FT-IR) spectroscopy and mass spectrometry.

AIBN-Promoted Synthesis of Bibenzo[ b][1,4]thiazines by the Condensation of 2,2'-Dithiodianiline with Methyl Aryl Ketones.

A series of bibenzo[ b][1,4]thiazines with various functional groups has been synthesized by a free-radical condensation reaction. Bibenzo[ b][1,4]thiazines were obtained in moderate to good yield (up to 85%) through a one-step reaction of readily available 2,2'-dithiodianiline and methyl aryl ketones with AIBN as radical initiator in HOAc. Bibenzo[ b][1,4]thiazines exhibit diversiform solid-state packing.

Copper- and Palladium-Catalyzed Cross-Coupling Reactions for the Synthesis of N-Fused Benzo[4,5]imidazo[2,1-b]thiazole Derivatives via Substituted trans-1,2-Diiodoalkenes, 1H-Benzo[d]imidazole-2-thiols, and Halobenzenes.

Two transition metal (Cu and Pd)-catalyzed C-S, C-N, and C-C bond cross-coupling reactions for the preparation of N-fused benzo[4,5]imidazo[2,1-b]thiazole derivatives were developed. A variety of 3-substituted and 2,3-disubstituted benzo[4,5]imidazo[2,1-b]thiazoles were efficiently and conveniently synthesized from the coupling reaction via trans-1,2-diiodoalkenes, 1H-benzo[d]imidazole-2-thiols, and halobenzenes in moderate to excellent yields.

Transition metal-free one-pot synthesis of fused 1,4-thiazepin-5(4H)-ones and theoretical study of the S-N type smiles rearrangement process.

A series of 1,4-thiazepin-5(4H)-one derivatives were synthesized via a transition metal-free one-pot Smiles rearrangement process at room temperature. Regioselective seven-membered heterocycles were constructed in good to excellent yields. To gain an in-depth understanding of the S-N type Smiles rearrangement mechanism, a theoretical study was also performed by quantum chemistry calculations.

One-pot synthesis of benzo[4,5]imidazo[1,2-a]quinazoline derivatives via facile transition-metal-free tandem process.

A one-pot transition metal-free method for synthesizing benzo[4,5]imidazo[1,2-a]quinazoline and imidazo[1,2-a]quinazoline derivatives has been developed. The approach is widely applicable to 2-fluoro-, 2-chloro-, 2-bromo- and 2-nitro-substituted aryl aldehyde and ketone substrates. The fluorescence properties of target compounds were studied.

A transition metal-free tandem process to pyridazinopyrido[3,2-f][1,4]thiazepine-diones via Smiles rearrangement.

A transition metal-free methodology for the synthesis of pyridazinopyrido[3,2-f][1,4]thiazepine-diones was studied. The construction of this tricyclic system went through a one-pot coupling/Smiles rearrangement/cyclization process. The high yields of pure products were obtained through simple recrystallization.