Simple and sensitive determination of Cr (III), Cu (II) and Pb (II) in tea infusions using AgNPs-modified resin combined with laser-induced breakdown spectroscopy.

The detection of heavy metals in tea infusions is important because of the potential health risks associated with their consumption. Existing highly sensitive detection methods pose challenges because they are complicated and time-consuming. In this study, we developed an innovative and simple method using Ag nanoparticles-modified resin (AgNPs-MR) for pre-enrichment prior to laser-induced breakdown spectroscopy for the simultaneous analysis of Cr (III), Cu (II), and Pb (II) in tea infusions. Signal enhancement using AgNPs-MR resulted in amplification with limits of detection of 0.22 µg L-1 for Cr (III), 0.33 µg L-1 for Cu (II), and 1.25 µg L-1 for Pb (II). Quantitative analyses of these ions in infusions of black tea from various brands yielded recoveries ranging from 83.3% to 114.5%. This method is effective as a direct and highly sensitive technique for precisely quantifying trace concentrations of heavy metals in tea infusions.

Long-range infrared absorption spectroscopy and fast mass spectrometry for rapid online measurements of volatile organic compounds from black tea fermentation.

Fermentation is the key process to determine the quality of black tea. Traditional physical and chemical analyses are time consuming, it cannot meet the needs of online monitoring. The existing rapid testing techniques cannot determine the specific volatile organic compounds (VOCs) produced at different stages of fermentation, resulting in poor model transferability; therefore, the current degree of black tea fermentation mainly relies on the sensory judgment of tea makers. This study used proton transfer reaction mass spectrometry (PTR-MS) and fourier transform infrared spectroscopy (FTIR) combined with different injection methods to collect VOCs of the samples, the rule of change of specific VOCs was clarified, and the extreme learning machine (ELM) model was established after principal component analysis (PCA), the prediction accuracy reached 95% and 100%, respectively. Finally, different application scenarios of the two technologies in the actual production of black tea are discussed based on their respective advantages.

Research on the Detection Method of Organic Matter in Tea Garden Soil Based on Image Information and Hyperspectral Data Fusion.

Soil organic matter is an important component that reflects soil fertility and promotes plant growth. The soil of typical Chinese tea plantations was used as the research object in this work, and by combining soil hyperspectral data and image texture characteristics, a quantitative prediction model of soil organic matter based on machine vision and hyperspectral imaging technology was built. Three methods, standard normalized variate (SNV), multisource scattering correction (MSC), and smoothing, were first used to preprocess the spectra. After that, random frog (RF), variable combination population analysis (VCPA), and variable combination population analysis and iterative retained information variable (VCPA-IRIV) algorithms were used to extract the characteristic bands. Finally, the quantitative prediction model of nonlinear support vector regression (SVR) and linear partial least squares regression (PLSR) for soil organic matter was established by combining nine color features and five texture features of hyperspectral images. The outcomes demonstrate that, in comparison to single spectral data, fusion data may greatly increase the performance of the prediction model, with MSC + VCPA-IRIV + SVR (R2C = 0.995, R2P = 0.986, RPD = 8.155) being the optimal approach combination. This work offers excellent justification for more investigation into nondestructive methods for determining the amount of organic matter in soil.

[Development and clinical application of a new reduction device for the treatment of tibial plateau fracture under arthroscopic monitoring].

OBJECTIVE: To develop a reduction device for the arthroscopy-assisted treatment of tibial plateau fracture and explore its clinical efficacy. METHODS: From May 2018 to September 2019, 21 patients with tibial plateau fracture were treated, including 17 males and 4 females. Their ages ranged from 18 to 55 years old with an average of (38.6±8.7) years old. There were 5 cases of Schatzker typeⅡand 16 cases of Schatzker type Ⅲ. The self-designed reductor combined with arthroscope was used for auxiliary reduction and fixation(minimally invasive percutaneous plate osteosynthesis). The efficacy was analyzed by observing the operation time, blood loss, fracture healing time and knee function(HSS and IKDC scoring criteria). RESULTS: All the 21 patients were followed up for 8 to 24 with an average of(14.0±3.1) months. The operative time ranged from 70 to 95 min with an average of(81.7±7.6)min, incision length ranged from 4 to 7 cm with an average of(5.3±0.9) cm, intraoperative blood loss ranged from 20 to 50 ml with an average of(35.3±5.2) ml, postoperative weight-bearing time ranged from 30 to 50 d with an average of(35.1±9.2) d, fracture healing time ranged from 65 to 90 d with an average of(75.0±4.4) d, and complications were 0 cases, respectively. The fracture was well healed and no screw plate fracture was observed. The knee function scores of HSS and IKDC 18 months after operation were significantly higher than those before operation(P<0.05). CONCLUSION: The custom-made reduction tool for the arthroscopic management of tibial plateau fracture is reasonable in design and simple in operation. The specific reduction tool could effectively reduce the fracture, and shorten the fixation time with minimally invasive procedure.

Detection of volatile organic compounds in adulterated tea using Fourier transform infrared spectroscopy and Proton-transfer-reaction mass spectrometry.

Aroma is a key factor used to evaluate tea quality. Illegal traders usually add essence to expired or substandard tea to improve its aroma so as to gain more profit. Traditional physical and chemical testing methods are time-consuming and costly. Furthermore, rapid detection techniques, such as near-infrared spectroscopy and machine vision, can only be used to detect adulterated powdered solid essences in tea. In this study, proton-transfer reaction mass spectrometry (PTR-MS) and Fourier-transform infrared spectroscopy (FTIR) were employed to detect volatile organic compounds (VOCs) in samples, and rapid detection of different tea adulterated liquid essence was achieved. The prediction accuracies of PTR-MS and FTIR reached over 0.941 and 0.957, respectively, and the minimum detection limits were lower than the actual used values in both. In this study, the different application scenarios of the two technologies are discussed based on their performance characteristics.

Rapid identification of artificial fragrant rice based on volatile organic compounds: From PTR-MS to FTIR.

The volatile organic compounds (VOCs) released from foods can reflect their internal properties. Artificial fragrant rice (AFR) is a fraudulent food product in which the flavor of low-quality rice is artificially enhanced by addition of essence. In this study, proton-transfer reaction mass spectrometry, long optical path gas phase FTIR spectroscopy and fiber optic evanescent wave were used to analyze the characteristic mass-charge ratios signal and infrared fingerprint signal of four essence which may be used to make AFR, and the prepared AFR samples with different essence levels (0.001 %-0.3 %) were used to verify the detection performance of the detection methods. The results show that the three detection methods effectively identified AFR containing the minimum recommended dose of essence (≥0.1 %, w/w). The above detection methods can provide detection results in real time without complex sample pretreatment and provide options as rapid screening methods for food regulatory authorities to identify AFR.

Moisture content monitoring in withering leaves during black tea processing based on electronic eye and near infrared spectroscopy.

Monitoring the moisture content of withering leaves in black tea manufacturing remains a difficult task because the external and internal information of withering leaves cannot be simultaneously obtained. In this study, the spectral data and the color/texture information of withering leaves were obtained using near infrared spectroscopy (NIRS) and electronic eye (E-eye), respectively, and then fused to predict the moisture content. Subsequently, the low- and middle-level fusion strategy combined with support vector regression (SVR) was applied to detect the moisture level of withering leaves. In the middle-level fusion strategy, the principal component analysis (PCA) and random frog (RF) were employed to compress the variables and select effective information, respectively. The middle-level-RF (cutoff line = 0.8) displayed the best performance because this model used fewer variables and still achieved a satisfactory result, with 0.9883 and 5.5596 for the correlation coefficient of the prediction set (Rp) and relative percent deviation (RPD), respectively. Hence, our study demonstrated that the proposed data fusion strategy could accurately predict the moisture content during the withering process.

A Real-Time Detection Method of Hg2+ in Drinking Water via Portable Biosensor: Using a Smartphone as a Low-Cost Micro-Spectrometer to Read the Colorimetric Signals.

This paper reported a real-time detection strategy for Hg2+ inspired by the visible spectrophotometer that used a smartphone as a low-cost micro-spectrometer. In combination with the smartphone's camera and optical accessories, the phone's built-in software can process the received light band image and then read out the spectral data in real time. The sensor was also used to detect gold nanoparticles with an LOD of 0.14 µM, which are widely used in colorimetric biosensors. Ultimately, a gold nanoparticles-glutathione (AuNPs-GSH) conjugate was used as a probe to detect Hg2+ in water with an LOD of 1.2 nM and was applied successfully to natural mineral water, pure water, tap water, and river water samples.

Research on moisture content detection method during green tea processing based on machine vision and near-infrared spectroscopy technology.

Moisture content is an important indicator that affects green tea processing. In this study, taking Chuyeqi tea as the research object, a quantitative prediction model of the changes in moisture content during the processing of green tea was constructed based on machine vision and near-infrared spectroscopy technology. First, collect the spectrum and image information in the process of spreading, fixation, first-drying, carding, and second-drying. The competitive adaptive reweighted sampling (CARS) method is then used to extract the characteristic wavelengths in the spectrum, and the image's 9 color features and 6 texture features are combined to establish linear PLSR and nonlinear SVR prediction models by fusing the data information from the two sensors. The results show that, when compared to single data, the PLSR and SVR models based on low-level data fusion do not effectively improve the model's prediction accuracy, but rather produce poor prediction results. In contrast, the PLSR and SVR models established by middle-level data fusion have improved the prediction accuracy of moisture content in green tea processing. Among them, the established SVR model has the best effect. The correlation coefficient of the calibration set (Rc) and the root mean square error of calibration (RMSEC) are 0.9804 and 0.0425, respectively, the correlation coefficient of the prediction set (Rp) and the root mean square error of prediction (RMSEP) are 0.9777 and 0.0490 respectively, and the relative percent deviation is 4.5002. The results show that the middle data fusion based on machine vision and near-infrared spectroscopy technology can effectively predict the moisture content in the processing of green tea, which has important guiding significance for overcoming the low prediction accuracy of a single sensor.

Nondestructive Testing and Visualization of Catechin Content in Black Tea Fermentation Using Hyperspectral Imaging.

Catechin is a major reactive substance involved in black tea fermentation. It has a determinant effect on the final quality and taste of made teas. In this study, we applied hyperspectral technology with the chemometrics method and used different pretreatment and variable filtering algorithms to reduce noise interference. After reduction of the spectral data dimensions by principal component analysis (PCA), an optimal prediction model for catechin content was constructed, followed by visual analysis of catechin content when fermenting leaves for different periods of time. The results showed that zero mean normalization (Z-score), multiplicative scatter correction (MSC), and standard normal variate (SNV) can effectively improve model accuracy; while the shuffled frog leaping algorithm (SFLA), the variable combination population analysis genetic algorithm (VCPA-GA), and variable combination population analysis iteratively retaining informative variables (VCPA-IRIV) can significantly reduce spectral data and enhance the calculation speed of the model. We found that nonlinear models performed better than linear ones. The prediction accuracy for the total amount of catechins and for epicatechin gallate (ECG) of the extreme learning machine (ELM), based on optimal variables, reached 0.989 and 0.994, respectively, and the prediction accuracy for EGC, C, EC, and EGCG of the content support vector regression (SVR) models reached 0.972, 0.993, 0.990, and 0.994, respectively. The optimal model offers accurate prediction, and visual analysis can determine the distribution of the catechin content when fermenting leaves for different fermentation periods. The findings provide significant reference material for intelligent digital assessment of black tea during processing.