Bimetallic Nanozyme: A Credible Tag for In Situ-Catalyzed Reporter Deposition in the Lateral Flow Immunoassay for Ultrasensitive Cancer Diagnosis.

The lateral flow immunoassay (LFIA) is a sought-after point-of-care testing platform, yet the insufficient sensitivity of the LFIA limits its application in the detection of tumor biomarkers. Here, a colorimetric signal amplification method, bimetallic nanozyme-mediated in situ-catalyzed reporter deposition (BN-ISCRD), was designed for ultrasensitive cancer diagnosis. The bimetallic nanozyme used, palladium@iridium core-shell nanoparticles (Pd@Ir NPs), had ultrahigh enzyme-like activity, which was further explained by the electron transfer of Pd@Ir NPs and the change in the Gibbs free energy during catalysis through density functional theory calculations. With gastric cancer biomarkers pepsinogen I and pepsinogen II as model targets, this assay could achieve a cutoff value of 10 pg/mL, which was 200-fold lower than that without signal enhancement. The assay was applied to correctly identify 8 positive and 28 negative clinical samples. Overall, this BN-ISCRD-based LFIA showed great merits and potential in the application of ultrasensitive disease diagnosis.

Visual and Electrochemical Detection of let-7a: A Tumor Suppressor and Biomarker.

Let-7a, a type of low-expressed microRNAs in cancer cells, has been investigated as a promising biomarker and therapeutic target for tumor suppression. Developing simple and sensitive detection methods for let-7a is important for cancer diagnosis and treatment. In this work, the hybridization chain reaction (HCR) was initiated by let-7a via two hairpin primers (H1 and H2). After the HCR, the remaining hairpin H1 was further detected by lateral flow assay (LFA) and electrochemical impedance spectroscopy. For LFA, biotin-modified H1(bio-H1) and free H2 were used for HCR. With the decrease of let-7a concentration, the color of T line gradually increased. As for electrochemical methods, the H1'-AuNP-modified electrode was used for detection of bio-H1 based on the difference of impedance (ΔRct) detected without and with different concentrations of let-7a participating in the HCR. This method could detect let-7a in the range of 10.0 fM and 1.0 nM with detection limits of 4.2 fM.

Mitochondria: promising organelle targets for cancer diagnosis and treatment.

Mitochondria, the energy supply factories for cell-life activities, play important roles in controlling epigenetics, differentiation and initiation, and the execution of apoptosis. These functions of the mitochondria contribute to cell adaptation to challenging microenvironment conditions. In past decades, mitochondrial malfunction has been revealed to be closely related to the occurrence and development of a variety of human disorders, including cancer and multiple neurodegenerative diseases. The disturbance of the mitochondrial genome (mtDNA) or mitochondrial vital functions, e.g., the production of adenosine triphosphate (ATP) and the generation of reactive oxygen species (ROS), can potentially be involved in disease pathogenesis. Recent research has shown that the precise monitoring of mitochondrial environments can provide potential directions for cancer diagnosis. Furthermore, mitochondrial-targeted cancer treatment exhibits unparalleled superiority for enhanced tumor therapy. Therefore, in this review, we focus on mitochondrial-based cancer diagnosis via monitoring mitochondrial respiration or mitophagy. Current approaches using mitochondrial-based cancer treatments, including targeting mitochondrial ATP, mitochondrial membrane permeability, and mitochondrial ROS levels and mtDNA, are also summarized. This review will provide insights into mitochondrial-mediated tumor monitoring and mitochondrial-based therapy.

A reusable capacitive immunosensor for detection of Salmonella spp. based on grafted ethylene diamine and self-assembled gold nanoparticle monolayers.

Fabrication of a novel capacitive immunosensor based on grafted ethylene diamine and self-assembled gold nanoparticle monolayer on glassy carbon electrode for the detection of Salmonella spp. is described for the first time. In the present study, the Salmonella spp. monoclonal antibodies (denoted as McAbs) was immobilized on gold nanoparticles. Interaction of McAbs and Salmonella spp. was detected directly using the electrochemical impedance spectroscopy (EIS) technique. The experimental results showed that the concentration of antigen was measured through the relative change in capacitance in the corresponding specific binding of Salmonella spp. and McAbs. Under the optimized conditions, the relative changes in capacitance were proportional to the logarithmic values of Salmonella spp. concentrations in the range of 1.0 x 10(2) to 1.0 x 10(5) CFU mL(-1) (r = 0.991) with the detection limit of 1.0 x 10(2) CFU mL(-1). The stability of proposed immunosensor could be estimated by determining the relative change in capacitance, which remained almost the same in two months and decreased gradually to 85.3% of initial value after four months' storage. The used immunosensor could be regenerated repeatedly by immersing in glycine-HCl buffer solution (pH 2.8). Finally, the proposed immunosensor was successfully used for the detection of Salmonella spp. in lab-processed commercial pork samples.

Monolithic silica xerogel capillary column for separations in capillary LC and pressurized CEC.

Monolithic capillary columns were prepared by the reaction of a mixture of potassium silicate solution and formamide. The surface of the monolith was coated with a thin film formed by a sol-gel method to increase the surface area of the monolith and simultaneously covered with C8 as stationary phase for reversed-phase separation. The morphology of the monolithic column was investigated by SEM. Monolithic columns prepared in this manner showed high permeability and can be operated in capillary LC (CLC) mode at a pressure of 20 psi. PAHs were used to evaluate the separation performance of the stationary phase using CLC and pressurized CEC (pCEC). Efficiencies of 20 000 and 28 000 plates per meter for naphthalene were obtained in CLC and pCEC modes, respectively. Improvement in column efficiency and reduction in analysis time over CLC and improvement in operation facility and separation selectivity over CLC were found using pCEC mode.

Open-tubular gas chromatography using capillary coated with octadecylamine-capped gold nanoparticles.

The octadecylamine-capped gold nanoparticles (ODA-Au-NPs) were prepared and directly used to coat the capillary wall. The hydrophobic coating acted as the stationary phase for open-tubular gas chromatography (OTGC). The ODA-Au-NPs can be adsorbed tightly onto the inner surface of fused silica capillary column via electrostatic interaction and enhanced interaction of van der Waals between gold nanoparticles and the capillary wall. Thus, the modification of the inner surface of capillary column by ODA-Au-NPs can be achieved simply by flushing the capillary with a solution of ODA-Au-NPs and the resulted ODA-Au-NPs coating is very stable. No perceptible degradation in the ODA-Au-NPs-based separation was observed after approximately 1900 sample runs. This type of columns also provided excellent chromatographic performances: high number of theoretical plates, outstanding run-to-run and column-to-column reproducibility, and high selectivity for a wide range of test mixtures. An efficiency of 2474 theoretical plates per meter for chlorobenzene was obtained on an ODA-Au-NPs-modified 1.6 m x 100 microm i.d. fused silica capillary column.

The simultaneous separation and determination of six flavonoids and troxerutin in rat urine and chicken plasma by reversed-phase high-performance liquid chromatography with ultraviolet-visible detection.

The method of high-performance liquid chromatography (HPLC) with UV-vis detection was used and validated for the simultaneous determination of six flavonoids (puerarin, rutin, morin, luteolin, quercetin, kaempferol) and troxerutin in rat urine and chicken plasma. Chromatographic separation was performed using a VP-ODS column (150 mm x 4.6 mm, 5.0 microm) maintained at 35.0 degrees C. The mobile phase was a mixture of water, methanol and acetic acid (57:43:1, v/v/v, pH 3.0) at the flow rate of 0.8 mL/min. Six flavonoids and troxerutin were analyzed simultaneously with good separation. On optimum conditions, calibration curves were found to be linear with the ranges of 0.10-70.00 microg/mL (puerarin, rutin, morin, luteolin, quercetin, kaempferol) and 0.50-350.00 microg/mL (troxerutin). The detection limits were 0.010-0.050 microg/mL. The method was validated for accuracy and precision, and it was successfully applied to determine drug concentrations in rat urine and chicken plasma samples from rat and chicken that had been orally administered with six flavonoids and troxerutin.

Trace measurement of phenothiazine drugs in tablets by micellar-enhanced fluorophotometric method.

It was found that in buffer solution of pH 7.0, the addition of sodium dodecyl sulfate (SDS) to the solution of phenothiazine drugs, such as chlorpromazine, promethazine and trifluoperazine, showed a remarkable enhancement of their fluorescence intensity. A further study proved that the phenothiazine drugs can be determined by fluorophotometric method in micellar system. Under optimal conditions, there was a good linear relationship between fluorescence intensity and phenothiazine compounds concentration, and the detection limit of 3.0 x 10(-8) M chlorpromazine, 3.0 x 10(-8) M promethazine and 1.5 x 10(-8) M trifluoperazine (S/N=3) were also obtained. This method has been used to determine phenothiazine drugs in tablets with satisfactory results.

Electrochemically deposited chitosan hydrogel for horseradish peroxidase immobilization through gold nanoparticles self-assembly.

A new strategy for immobilization of horseradish peroxidase (HRP) has been presented by self-assembling gold nanoparticles on chitosan hydrogel modified Au electrode. From a mildly acidic chitosan solution, a chitosan film is electrochemically deposited on Au electrode surface via a negative voltage bias. This process is accompanied by the hydrogen evolution reaction, and the released hydrogen gas made the deposited chitosan film with porous structure, which facilitates the assembly of gold nanoparticles and HRP. The resulting substrates were characterized by atomic force microscopy (AFM) and electrochemical impedance spectroscopy (EIS). The immobilized HRP displayed an excellent catalytic property to the reduction of H2O2 in the presence of methylene blue mediator. The resulting biosensor (HRP-modified electrode) showed a wide dynamic range of 8.0 microM-15 mM H2O2, and the linear ranges were 8.0 microM-0.12 mM and 0.50-12 mM, with a detection limit of 2.4 microM estimated at a signal-to-noise ratio of 3. Moreover, the biosensor remained about 85% of its original sensitivity after four weeks' storage.