Dimensional and Doping Engineering of Chiral Perovskites with Enhanced Spin Selectivity for Green Emissive Spin Light-Emitting Diodes.

Chiral perovskites play a pivotal role in spintronics and optoelectronic systems attributed to their chiral-induced spin selectivity (CISS) effect. Specifically, they allow for spin-polarized charge transport in spin light-emitting diodes (LEDs), yielding circularly polarized electroluminescence at room temperature without external magnetic fields. However, chiral lead bromide-based perovskites have yet to achieve high-performance green emissive spin-LEDs, owing to limited CISS effects and charge transport. Herein, we employ dimensional regulation and Sn2+-doping to optimize chiral bromide-based perovskite architecture for green emissive spin-LEDs. The optimized (PEA)x(S/R-PRDA)2-xSn0.1Pb0.9Br4 chiral perovskite film exhibits an enhanced CISS effect, higher hole mobility, and better energy level alignment with the emissive layer. These improvements allow us to fabricate green emissive spin-LEDs with an external quantum efficiency (EQE) of 5.7% and an asymmetry factor |gCP-EL| of 1.1 × 10-3. This work highlights the importance of tailored perovskite architectures and doping strategies in advancing spintronics for optoelectronic applications.

Short-branched alkyl sulfobetaine-passivated CsPbBr3 nanocrystals for efficient green light emitting diodes.

Inorganic cesium lead bromide nanocrystals (CsPbBr3 NCs) hold promising prospects for high performance green light-emitting diodes (LEDs) due to their exceptional color purity and high luminescence efficiency. However, the common ligands employed for passivating these indispensable NCs, such as long-chain organic ligands like oleic acid and oleylamine (OA/OAm), display highly dynamic binding and electronic insulating issues, thereby resulting in a low efficiency of the as-fabricated LEDs. Herein, we report a new zwitterionic short-branched alkyl sulfobetaine ligand, namely trioctyl(propyl-3-sulfonate) ammonium betaine (TOAB), to in situ passivate CsPbBr3 NCs via a feasible one-step solution synthesis, enabling efficiency improvement of CsPbBr3 NC-based LEDs. The zwitterionic TOAB ligand not only strengthened the surface passivation of CsPbBr3 NCs with a high photoluminescence quantum yield (PLQY) of 97%, but also enhanced the carrier transport in the fabricated CsPbBr3 NC thin films due to the short-branched alkyl design. Consequently, CsPbBr3 NCs passivated with TOAB achieved a green LED with an external quantum efficiency (EQE) of 7.3% and a maximum luminance of 5716 cd m-2, surpassing those of LEDs based on insulating long-chain ligand-passivated NCs. Our work provides an effective surface passivation ligand design to enhance the performance of CsPbBr3 NC-based LEDs.

Mitigating halide ion migration by resurfacing lead halide perovskite nanocrystals for stable light-emitting diodes.

Lead halide perovskite nanocrystals are promising for next-generation high-definition displays, especially in light of their tunable bandgaps, high color purities, and high carrier mobility. Within the past few years, the external quantum efficiency of perovskite nanocrystal-based light-emitting diodes has progressed rapidly, reaching the standard for commercial applications. However, the low operational stability of these perovskite nanocrystal-based light-emitting diodes remains a crucial issue for their industrial development. Recent experimental evidence indicates that the migration of ionic species is the primary factor giving rise to the performance degradation of perovskite nanocrystal-based light-emitting diodes, and ion migration is closely related to the defects on the surface of perovskite nanocrystals and at the grain boundaries of their thin films. In this review, we focus on the central idea of surface reconstruction of perovskite nanocrystals, discuss the influence of surface defects on halide ion migration, and summarize recent advances in resurfacing perovskite nanocrystal strategies toward mitigating halide ion migration to improve the stability of the as-fabricated light-emitting diode devices. From the perspective of perovskite nanocrystal resurfacing, we set out a promising research direction for improving both the spectral and operational stability of perovskite nanocrystal-based light-emitting diodes.

Pseudohalogen Resurfaced CsPbBr3 Nanocrystals for Bright, Efficient, and Stable Green-Light-Emitting Diodes.

Lead halide perovskite nanocrystals (LHP NCs) are regarded as promising emitters for next-generation ultrahigh-definition displays due to their high color purity and wide color gamut. Recently, the external quantum efficiency (EQE) of LHP NC based light-emitting diodes (PNC LEDs) has been rapidly improved to a level required by practical applications. However, the poor operational stability of the device, caused by halide ion migration at the grain boundary of LHP NC thin films, remains a great challenge. Herein, we report a resurfacing strategy via pseudohalogen ions to mitigate detrimental halide ion migration, aiming to stabilize PNC LEDs. We employ a thiocyanate solution processed post-treatment method to efficiently resurface CsPbBr3 NCs and demonstrate that the thiocyanate ions can effectively inhibit bromide ion migration in LHP NC thin films. Owing to thiocyanate resurfacing, we fabricated LEDs with a high EQE of 17.3%, a maximum brightness of 48000 cd m-2, and an excellent operation half-life time.

A LaCl3-based lithium superionic conductor compatible with lithium metal.

Inorganic superionic conductors possess high ionic conductivity and excellent thermal stability but their poor interfacial compatibility with lithium metal electrodes precludes application in all-solid-state lithium metal batteries1,2. Here we report a LaCl3-based lithium superionic conductor possessing excellent interfacial compatibility with lithium metal electrodes. In contrast to a Li3MCl6 (M = Y, In, Sc and Ho) electrolyte lattice3-6, the UCl3-type LaCl3 lattice has large, one-dimensional channels for rapid Li+ conduction, interconnected by La vacancies via Ta doping and resulting in a three-dimensional Li+ migration network. The optimized Li0.388Ta0.238La0.475Cl3 electrolyte exhibits Li+ conductivity of 3.02 mS cm-1 at 30 °C and a low activation energy of 0.197 eV. It also generates a gradient interfacial passivation layer to stabilize the Li metal electrode for long-term cycling of a Li-Li symmetric cell (1 mAh cm-2) for more than 5,000 h. When directly coupled with an uncoated LiNi0.5Co0.2Mn0.3O2 cathode and bare Li metal anode, the Li0.388Ta0.238La0.475Cl3 electrolyte enables a solid battery to run for more than 100 cycles with a cutoff voltage of 4.35 V and areal capacity of more than 1 mAh cm-2. We also demonstrate rapid Li+ conduction in lanthanide metal chlorides (LnCl3; Ln = La, Ce, Nd, Sm and Gd), suggesting that the LnCl3 solid electrolyte system could provide further developments in conductivity and utility.

Planar defect-free pure red perovskite light-emitting diodes via metastable phase crystallization.

Solution-processable all-inorganic CsPbI3-xBrx perovskite holds great potential for pure red light-emitting diodes. However, the widely existing defects in this mixed halide perovskite markedly limit the efficiency and stability of present light-emitting diode devices. We here identify that intragrain Ruddlesden-Popper planar defects are primary forms of such defects in the CsPbI3-xBrx thin film owing to the lattice strain caused by inhomogeneous halogen ion distribution. To eliminate these defects, we develop a stepwise metastable phase crystallization strategy to minimize the CsPbI3-xBrx perovskite lattice strain, which brings planar defect-free CsPbI3-xBrx thin film with improved radiative recombination, narrowed emission band, and enhanced spectral stability. Using these high-quality thin films, we fabricate spectrally stable pure red perovskite light-emitting diodes, showing 17.8% external quantum efficiency and 9000 candela meter-2 brightness with color coordinates required by Rec. 2020.

Thermochromic Phosphors Based on One-Dimensional Ionic Copper-Iodine Chains Showing Solid-State Photoluminescence Efficiency Exceeding 99 .

Thermochromic phosphors are intriguing materials for realizing thermochromic behaviors of light-emitting diodes. Here a highly luminescent and stable thermochromic phosphor based on one-dimensional Cu4 I6 (4-dimethylamino-1-ethylpyridinium)2 is reported. This unique ionic copper-iodine chain-based hybrid exhibits near-unity photoluminescence efficiency owing to the through-space charge-transfer character of relevant electronic transitions. More importantly, an alternative mechanism of thermochromic phosphorescence was unraveled, supported by a first principles simulation of concerted copper atom migration in the copper-iodine chain. Furthermore, we successfully fabricate a bright thermochromic light-emitting diode using this Cu4 I6 (4-dimethylamino-1-ethylpyridinium)2 thermochromic phosphor. Our reported flexible ionic copper-iodine chain-based thermochromic luminescent material represents a new type of cost-effective functional phosphor.

α-BaF2 Nanoparticle Substrate-Enabled γ-CsPbI3 Heteroepitaxial Growth for Efficient and Bright Deep-Red Light-Emitting Diodes.

All-inorganic CsPbI3 perovskite is attractive for deep-red light-emitting diodes (LEDs) because of its excellent carrier mobility, high color purity, and solution processability. However, the high phase transition energy barrier of optically active CsPbI3 black phase hinders the fabrication of efficient and bright LEDs. Here, we report a novel α-BaF2 nanoparticle substrate-promoted solution-processable heteroepitaxial growth to overcome this hindrance and obtain high-quality optically active γ-CsPbI3 thin films, achieving efficient and bright deep-red LEDs. We unravel that the highly exposed planes on the α-BaF2 nanoparticle-based heteroepitaxial growth substrate have a 99.5% lattice matching degree with the (110) planes of γ-CsPbI3. This ultrahigh lattice matching degree initiates solution-processed interfacial strain-free epitaxial growth of low-defect and highly oriented γ-CsPbI3 thin films on the substrate. The obtained γ-CsPbI3 thin films are uniform, smooth, and highly luminescent, based on which we fabricate efficient and bright deep-red LEDs with a high peak external quantum efficiency of 14.1% and a record luminance of 1325 cd m-2.

High Color Purity and Efficient Green Light-Emitting Diode Using Perovskite Nanocrystals with the Size Overly Exceeding Bohr Exciton Diameter.

Lead halide perovskite nanocrystals (PNCs) are emerging as promising light emitters to be actively explored for high color purity and efficient light-emitting diodes. However, the most reported lead halide perovskite nanocrystal light-emitting diodes (PNCLEDs) encountered issues of emission line width broadening and operation voltage elevating caused by the quantum confinement effect. Here, we report a new type of PNCLED using large-size CsPbBr3 PNCs overly exceeding the Bohr exciton diameter, achieving ultranarrow emission line width and rapid brightness rise around the turn-on voltage. We adopt calcium-tributylphosphine oxide hybrid ligand passivation to produce highly dispersed large-size colloidal CsPbBr3 PNCs with a weak size confinement effect and also high photoluminescence quantum yield (∼85%). Utilizing these large-size PNCs as emitters, we manifest that the detrimental effects caused by the quantum confinement effect can be avoided in the device, thereby realizing the highest color purity in green PNCLED, with a narrow full width at half-maximum of 16.4 nm and a high corrected maximum external quantum efficiency of 17.85%. Moreover, the operation half-life time of the large-size PNCLED is 5-fold of that based on smaller-size PNCs. Our work provides a new avenue for improving the performance of PNCLEDs based on unconventional large-size effects.

Spectrally Stable and Efficient Pure Red CsPbI3 Quantum Dot Light-Emitting Diodes Enabled by Sequential Ligand Post-Treatment Strategy.

Metal halide perovskites are promising semiconductors for next-generation light-emitting diodes (LEDs) due to their high luminance, excellent color purity, and handily tunable band gap. However, it remains a great challenge to develop perovskite LEDs (PeLEDs) with pure red emission at the wavelength of 630 nm. Herein, we report a spectrally stable and efficient pure red PeLED by employing sequential ligand post-treated CsPbI3 quantum dots (QDs). The synthesized CsPbI3 QDs with a size of ∼5 nm are treated in sequential steps using the ligands of 1-hydroxy-3-phenylpropan-2-aminium iodide (HPAI) and tributylsulfonium iodide (TBSI), respectively. The CsPbI3 QD films exhibit improved optoelectronic properties, which enables the fabrication of a pure red PeLED with a peak external quantum efficiency (EQE) of 6.4% and a stable EL emission centered at the wavelength of 630 nm. Our reported sequential ligand post-treatment strategy opens a new route to improve the stability and efficiency of PeLEDs based on QDs.

Chiral Phosphine-Copper Iodide Hybrid Cluster Assemblies for Circularly Polarized Luminescence.

Chiral chromophores and their ordered assemblies are intriguing for yielding circularly polarized luminescence (CPL) and exploring intrinsic structure-light emission relationships. With the extensively studied chiral organic molecules and inorganic nanoparticle assemblies for the amplified CPL, the assemblies of copper halide hybrid clusters have attracted intensive attention due to their potential efficient CPL. Here, we report robust chiral phosphine-copper iodide hybrid clusters and their layered assemblies in crystalline states for amplified CPL. We reveal that the intermolecular interactions endow the clusters with the capability of assembling into chiral crystalline CPL materials, including hexagonal platelet-shaped microcrystals (glum ≈ 9.5 × 10-3) and highly oriented crystalline films (glum ≈ 5 × 10-3). Owing to the high crystalline feature of the thin film, we demonstrate an electroluminescent device with bright electroluminescence (1200 cd m-2).

Bright and Near-Unity Polarized Light Emission Enabled by Highly Luminescent Cu2I2-Dimer Cluster-Based Hybrid Materials.

As one fundamental property of light, polarization has a huge impact in quantum optics and optoelectronics through light-matter interactions. However, the bright and near-unity polarized light emissions in the visible range by solid crystalline materials are scantly realized. Here, we report well-defined quasi two-dimensional (2D) hybrid crystals based on the linear alignment of Cu2I2-dimer/bidentate ligand hybrid clusters for achieving bright and near-unity linearly polarized light emissions. Using first-principle calculations, we demonstrate that the superaligned transition dipole moments are the key for the observed excellent polarized light emissions. To further enhance the photoluminescence (PL) polarization degree, we fabricate Cu2I2-dimer-based hybrid nanobelts, which display high PL quantum yield (up to 64%) and ultrahigh PL polarization degree (∼0.99). Our reported copper iodine cluster-based luminescent hybrid materials for bright and highly polarized light emissions will have great potential for future quantum optics applications.

Modulation of Metal Halide Structural Units for Light Emission.

ConspectusWith the development of solid-state lighting technology, efficient light sources that combine high brightness, wide range, and good stability are in high demand for next-generation lighting and displays. Metal halides are emerging as promising luminescent materials due to their versatility for desirable light emission manipulations. This is because the optical activity of the metal halide material depends on the metal halide structural unit and the organic ions or coordinated organic ligands. The different assembly of metal halide units and organic parts can enable versatile light emissions, such as lead halide perovskites (LHPs) and copper halide-organic hybrids. Impressively, the external quantum efficiency of the LHP based light-emitting diodes (LEDs) has improved significantly from 0.1% to over 20% in just five years. With this great progress, the structural lability and toxicity of the LHPs are now the critical issues that need to be addressed for practical applications. These issues are mainly rooted in the intrinsic lead composition and low formation energy crystal structure of the widely adopted LHPs. Thus, the modulation of the structure and composition of the basic metal halide structural units is considered a rational strategy to address these issues.In this Account, we will present a general material design using metal halide structural units as basic building blocks to build up metal halide luminescent materials for solid-state lighting devices. Following this route, we will emphasize the modulation of metal halide structural units to tackle the existing challenges in lead halides, including the instability of crystalline structure, ion migration, and the presence of toxic lead. Considering basic components in structural units, we will highlight ionic engineering in LHPs via ion doping, substitution, and modification to enhance the crystal structural stability and suppress ion migration. To replace toxic lead, we will introduce recent advances in the modulation of lead-free halide structural units by active ion doping and organic ligand coordination to fabricate highly luminescent materials. Finally, we will present future strategies of metal halide structural unit modulation for solid-state light emissions. We hope this Account will provide new insights for designing metal halide materials from the viewpoint of the modulation of the basic building blocks and inspire future studies of advanced metal halide materials for solid-state light emitting applications.

Feeding of pea leafminer larvae simultaneously activates jasmonic and salicylic acid pathways in plants to release a terpenoid for indirect defense.

The pea leafminer, Liriomyza huidobrensis, is an important pest species affecting ornamental crops worldwide. Plant damage consists of oviposition and feeding punctures created by female adult flies as well as larva-bored mines in leaf mesophyll tissues. How plants indirectly defend themselves from these two types of leafminer damage has not been sufficiently investigated. In this study, we compared the indirect defense responses of bean plants infested by either female adults or larvae. Puncturing of leaves by adults released green leaf volatiles and terpenoids, while larval feeding caused plants to additionally emit methyl salicylate and (E,E)-4,8,12-trimethyl-1,3,7,11-tridecatetraene (TMTT). Puncturing of plants by female adults induced increases in jasmonic acid (JA) and JA-related gene expressions but reduced the expressions of salicylic acid (SA)-related genes. In contrast, JA and SA and their-related gene expression levels were increased significantly by larval feeding. The exogenous application of JA+SA significantly triggered TMTT emission, thereby significantly inducing the orientation behavior of parasitoids. Our study has confirmed that larval feeding can trigger TMTT emission through the activation of both JA and SA pathways to attract parasitoids; however, TMTT alone is less attractive than the complete blend of volatiles released by infested plants.

Suppressing Auger Recombination in Cesium Lead Bromide Perovskite Nanocrystal Film for Bright Light-Emitting Diodes.

All-inorganic cesium lead halide perovskite colloidal nanocrystals are attractive for next-generation light-emitting diodes because of their high color purity, but the nonradiative Auger recombination in perovskite nanocrystal film limits the efficiency and brightness of the fabricated devices. Here, we introduce a surface-engineering process to exchange the original long-chain oleic acid/oleylamine ligands by the cerium-tributylphosphine oxide hybrid ligands to suppress nonradiative Auger recombination in CsPbBr3 NC film for bright and low-efficiency roll-off light-emitting diodes. Using ultrafast transient absorption and time-resolved photoluminescence spectroscopy, we demonstrate that the hybrid ligand passivation can efficiently remove surface trap states to enhance radiative recombination and homogenize the exciton concentration to suppress nonradiative Auger recombination in the CsPbBr3 nanocrystal thin film. Consequently, we fabricate a light-emitting diode with efficient charge injection into the CsPbBr3 nanocrystal emitting layer, achieving a pronounced improvement of electroluminescence with an external quantum efficiency from 5.5% to 9.1%. More importantly, the efficiency roll-off characteristics of high-brightness light-emitting diodes is effectively mitigated. Our reported hybrid ligand passivation suppressed Auger recombination strategy shows a great potential for fabricating high-brightness cesium lead halide perovskite light-emitting diodes.

Highly Luminescent Copper Iodide Cluster Based Inks with Photoluminescence Quantum Efficiency Exceeding 98.

Highly luminescent inks are desirable for various applications such as decorative coating, art painting, and anticounterfeiting, to name a few. However, present inks display low photoluminescent efficiency requiring a strong excitation light to make them glow. Here, we report a highly luminescent ink based on the copper-iodide/1-Propyl-1,4-diazabicyclo[2.2.2]octan-1-ium (Cu4I6(pr-ted)2) hybrid cluster with a quantum efficiency exceeding 98%. Under the interaction between the Cu4I6(pr-ted)2 hybrid cluster and polyvinylpyrrolidone (PVP), the highly luminescent Cu4I6(pr-ted)2/PVP ink can be facilely prepared via the one-pot solution synthesis. The obtained ink exhibits strong green light emission that originates from the efficient phosphorescence of Cu4I6(pr-ted)2 nanocrystals. Attractively, the ink displays high conversion efficiency for the ultraviolet light to bright green light emission due to its wide Stokes shift, implying great potential for anticounterfeiting and luminescent solar concentrator coating.

Potassium Bromide Surface Passivation on CsPbI3-xBrx Nanocrystals for Efficient and Stable Pure Red Perovskite Light-Emitting Diodes.

All-inorganic lead halide perovskite nanocrystals (NCs) are potential candidates for fabricating high-performance light-emitting diodes (LEDs) owing to their precisely tunable bandgaps, high photoluminescence (PL) efficiency, and excellent color purities. However, the performance of pure red (630-640 nm) all-inorganic perovskite LEDs is still limited by the halide segregation-induced instability of the electroluminescence (EL) of mixed halide CsPbI3-xBrx NCs. Herein, we report an effective approach to improving the EL stability of pure red all-inorganic CsPbI3-xBrx NC-based LEDs via the passivation of potassium bromide on NCs. By adding potassium oleate to the reaction system, we obtained potassium bromide surface-passivated (KBr-passivated) CsPbI3-xBrx NCs with pure red PL emission and a photoluminescence quantum yield (PLQY) exceeding 90%. We determine that most potassium ions present on the surface of NCs bind with bromide ions and thus demonstrate that potassium bromide surface passivation of NCs can both improve the PL stability and inhibit the halide segregation of NCs. Using KBr-passivated CsPbI3-xBrx NCs as an emitting layer, we fabricated stable and pure red perovskite LEDs with emission at 637 nm, showing a maximum brightness of 2671 cd m-2, maximum external quantum efficiency of 3.55%, and good EL stability. The proposed KBr-passivated NC strategy will open a new avenue for fabricating efficient, stable, and tunable pure color perovskite NC LEDs.

Metal Halide Perovskite Supercrystals: Gold-Bromide Complex Triggered Assembly of CsPbBr3 Nanocubes.

Using nanocrystals as "artificial atoms" to construct supercrystals is an interesting process to explore the stacking style of nanoscale building blocks and corresponding collective properties. Various types of semiconducting supercrystals have been constructed via the assembly of nanocrystals driven by the entropic, electrostatic, or van der Waals interactions. We report a new type of metal halide perovskite supercrystals via the gold-bromide complex triggered assembly of newly emerged attractive CsPbBr3 nanocubes. Through introducing gold-bromide (Au-Br) complexes into CsPbBr3 nanocubes suspension, the self-assembly process of CsPbBr3 nanocubes to form supercrystals was investigated with the different amount of Au-Br complexes added to the suspensions, which indicates that the driven force of the formation of CsPbBr3 supercrystals included the van der Waals interactions among carbon chains and electrostatic interactions between Au-Br complexes and surfactants. Accordingly, the optical properties change with the assembly of CsPbBr3 nanocubes and the variation of mesoscale structures of supercrystals with heating treatment was revealed as well, demonstrating the ionic characteristics of CsPbBr3 nanocrystals. The fabricated CsPbBr3 supercrystal presents a novel type of semiconducting supercrystals that will open an avenue for the assembly of ionic nanocrystals.

Attitudes Toward Advance Directives Among Patients and Their Family Members in China.

OBJECTIVES: Chinese people are generally unfamiliar with the concept of advance care planning or advance directives (ACP/ADs), which raises dilemmas in life-support choice and can even affect clinical decision making. To understand and address the issues involved better, we investigated the awareness of ACP/ADs in China, as well as people's attitudes toward medical autonomy and end-of-life care. DESIGN: A multicenter cross-sectional survey, conducted from August 1 to December 31, 2016. SETTING: Twenty-five hospitals located in 15 different provinces throughout mainland China. PARTICIPANTS: Pairs of adult patients without dementia or malignancies, and a family member. MEASUREMENTS: Participants self-filled anonymous questionnaires, and the data collected were analyzed to relate patients' sociodemographic characteristics to their awareness of ACP/ADs and attitudes to health care autonomy and end-of-life care. RESULTS: Among 1084 patients who completed the questionnaire, 415 (38.3%) had heard about ACP/ADs. Having been informed about ACP/ADs, 995 (91.8%) were willing to find out their true health status and decide for themselves; 549 (50.6%) wanted to institute ACP/ADs. Regarding end-of-life care, 473 (43.6%) chose Do Not Resuscitate, and 435 (40.1%) wished to forgo life-support treatment if irreversibly moribund. Patients predominantly (481, 44.4%) chose general hospital as their preferred place to spend their last days of life; only 114 (10.5%) favored a special hospice facility. Patients' main concerns during end-of-life care were symptom control (35.1%), followed by functional maintenance and quality of life (29.8%), and prolonging life (18.9%). More highly educated patients had significantly greater awareness of ACP/ADs than less well educated ones (χ2 = 59.22, P < .001) and were more willing to find out the truth for themselves (χ2 = 58.30, P ≤ .001) and make medical decisions in advance (χ2 = 55.92, P < .001). Younger patients were also more willing than older ones to know the truth (χ2 = 38.23, P = .001) and make medical decisions in advance (χ2 = 18.42, P = .018), and were also more likely to wish to die at home (χ2 = 96.25, P < .001). Only 212 patients' family members (19.6%) wanted life-support treatment for themselves if irreversibly moribund, whereas 592 (54.6%) would want their relative to receive such procedures in the same circumstances; a similar discrepancy was evident for end-of-life invasive treatment (18.3% vs 42.7%). CONCLUSIONS: Awareness about ACP/ADs in China is still low. Providing culturally sensitive knowledge, education, and communication regarding ACP/ADs is a feasible first step to promoting this sociomedical practice.

Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance.

Lithium metal is one of the most attractive anode materials for next-generation lithium batteries due to its high specific capacity and low electrochemical potential. However, the poor cycling performance and serious safety hazards, caused by the growth of dendritic and mossy lithium, has long hindered the application of lithium metal based batteries. Herein, we reported a rational design of free-standing Cu nanowire (CuNW) network to suppress the growth of dendritic lithium via accommodating the lithium metal in three-dimensional (3D) nanostructures. We demonstrated that as high as 7.5 mA h cm(-2) of lithium can be plated into the free-standing copper nanowire (CuNW) current collector without the growth of dendritic lithium. The lithium metal anode based on the CuNW exhibited high Coulombic efficiency (average 98.6% during 200 cycles) and outstanding rate performance owing to the suppression of lithium dendrite growth and high conductivity of CuNW network. Our results demonstrate that the rational nanostructural design of current collector could be a promising strategy to improve the performance of lithium metal anode enabling its application in next-generation lithium-metal based batteries.