Advanced Optical Information Encryption Enabled by Polychromatic and Stimuli-Responsive Luminescence of Sb-Doped Double Perovskites.

The smart materials with multi-color and stimuli-responsive luminescence are very promising for next generation of optical information encryption and anti-counterfeiting, but these materials are still scarce. Herein, a multi-level information encryption strategy is developed based on the polychromatic emission of Sb-doped double perovskite powders (SDPPs). Cs2NaInCl6:Sb, Cs2KInCl6:Sb, and Cs2AgInCl6:Sb synthesized through coprecipitation methods exhibit broadband emissions with bright blue, cyan, and orange colors, respectively. The information transmitted by specific SDPP is encrypted when different SDPPs are mixed. The confidential information can be decrypted by selecting the corresponding narrowband filter. Then, an encrypted quick response (QR) code with improved security is demonstrated based on this multi-channel selection strategy. Moreover, the three types of SDPPs exhibit three different water-triggered luminescence switching behaviors. The confidential information represented by Cs2NaInCl6:Sb can be erased/recovered through a simple water spray/drying. Whereas, the information collected from the green channel is permanently erased by moisture, which fundamentally avoids information leakage. Therefore, different encryption schemes can be designed to meet a variety of encryption requirements. The multicolor and stimuli-responsive luminescence greatly enrich the flexibility of optical information encryption, which leaps the level of security and confidentiality.

Spatio-temporal evolution and its policy influencing factors of agricultural land-use efficiency under carbon emission constraint in mainland China.

In the context of the vision to reach peak carbon dioxide emissions before 2030 and achieve carbon neutrality before 2060, Mainland China's agricultural development will face strict carbon constraints. This paper analyzes the agricultural land-use efficiency of Mainland China's agriculture under carbon emission constraint from 1996 to 2020, based on the unexpected super SBM (Slack-based measure)-Undesirable DEA, Malmquist index model, and quartile division-GIS method. The results show that: from 1996 to 2020, the agricultural output value per land and grain output per land show an upward trend, and the agricultural carbon emissions per land of most provinces show an increasing trend and larger emissions. The agricultural land-use efficiency in Mainland China rises first and then decreases, and technological progress is the decisive path to improving the agricultural land-use efficiency in Mainland China. The average MI in the prominent grain-selling area during 1996-2020 was as high as 1.071, which was significantly higher than that in the prominent grain-producing area (1.039) and the balance area (1.030). The improvement of agricultural land-use efficiency is mostly due to technological progress, but the instability of technical input and management in land use. To improve agricultural land-use efficiency in Mainland China, we should pay attention to the precise policy formulation of low-carbon and high-quality development and strengthen government investment in the difference between space resource endowment and development status.

The relationship between skeletal muscle mass and exercise capacity in patients undergoing hemodialysis: An exploratory secondary-analysis.

BACKGROUND: Protein-energy wasting is commonly observed in patients undergoing hemodialysis, leading to reduced muscle mass and, in severe cases, sarcopenia, which significantly impacts the patients' quality of life and clinical outcomes. Exercise interventions are frequently employed to address muscle loss in these patients. However, the relationship between exercise capacity and skeletal muscle mass in this context remains uncertain. In this study, researchers conducted a series of body composition analysis and exercise capacity test to explore the relationship between exercise capacity and skeletal muscle mass. METHODS: This study recruited 32 patients undergoing hemodialysis and analyzed their demographic and clinical parameters. To assess aerobic exercise capacity, the incremental shuttle walking test (ISWT) was conducted, while the handgrip strength test was used to evaluate muscle strength. The patients' body compositions were assessed using the Fresenius Body Composition Monitor, and the appendicular skeletal muscle was scanned using a GE Healthcare Lunar iDXA scanner. Three sequential linear models were employed to model the relationship between ISWT and skeletal muscle mass. Model 1 regressed ISWT against gender and age; Model 2 added handgrip strength, fat tissue index, and Davies comorbidity scores as additional predictors; and Model 3 further included the appendicular skeletal muscle index (appendicular skeletal muscle/height). FINDINGS: After controlling for age and gender (Model 1: R2 = 0.373), and subsequently including handgrip strength, fat tissue index, and Davies comorbidity score effects (Model 2: R2 = 0.581), the impact of appendicular skeletal muscle on ISWT was found to be non-significant (Model 3: R2 = 0.600). CONCLUSION: There was no significant correlation observed between exercise capacity and skeletal muscle mass in patients undergoing hemodialysis, indicating the factors influencing exercise capacity in this patient population are complex and that increasing skeletal muscle mass may not necessarily involve solely addressing the improvement of exercise capacity.

Enhancing the Cycle Performance of Lithium-Sulfur Batteries by Coating the Separator with a Cation-Selective Polymer Layer.

Lithium-sulfur batteries are believed to possess the feasibility to power electric vehicles in the future ascribed to the competitive energy density. However, soluble polysulfides continuously shuttle between the sulfur electrode and lithium anode across the separator, which dramatically impairs the battery's capacity. Herein, the surface of a polypropylene separator (PP film) is successfully modified with a delicately designed cation-selective polymer layer to suppress the transport of polysulfides. In principle, since bis-sulfonimide anions groups on the backbone of the polymer are immobilized, only cations can pass through the polymer layer. Furthermore, plenty of ethoxy chains in the polymer can facilitate lithium-ion mobility. Consequently, in addition to obstructing the movement of negatively charged polysulfides by the electrostatic repulsive force of fixed anions, the coated multi-functional layer on the PP film also guarantees the smooth conduction of lithium ions. The investigations demonstrate that the battery with the pristine PP film only delivers 228.5 mAh g-1 after 300 cycles at 2 C with a high capacity fading rate of 60.9 %. By contrast, the polymer-coated sample can release 409.4 mAh g-1 under the identical test condition and the capacity fading rate sharply declines to 43.2 %, illustrating superior cycle performance.

Development of ANN-Based Warpage Prediction Model for FCCSP via Subdomain Sampling and Taguchi Hyperparameter Optimization.

This study aims to establish an accurate prediction model using artificial neural networks (ANNs) to effectively and efficiently predict the process-induced warpage of a flip-chip chip-scale package (FCCSP). To enhance model performance, a novel subdomain-based sampling strategy and Taguchi hyperparameter optimization are proposed in the ANN algorithm. To simulate the warpage behavior the FCCSP during fabrication, a process modeling approach is proposed, where the viscoelastic behavior of the epoxy molding compound is included, in which the viscoelastic properties are determined using dynamic mechanical measurement. In addition, the temperature-dependent thermal-mechanical properties of the materials in the FCCSP are assessed through thermal-mechanical analysis and dynamic mechanical analysis. The modeled warpage results are verified by the warpage measurement. Next, warpage parametric analysis is performed to identify the key factors most affecting warpage behavior for use in the construction of the warpage prediction model. Moreover, the advantages of the proposed sampling and hyperparameter tuning approaches are proved by comparing with other existing models, and the validity of the developed ANN-based deep learning warpage prediction model is demonstrated through a validation dataset.

Two-dimensional lateral anatase-rutile TiO2 phase junctions with oxygen vacancies for robust photoelectrochemical water splitting.

Exploiting the photoelectrode materials with broad solar light response, high-efficient separation of photogenerated charges and abundant active sites is extremely vital yet enormously challenging. Herein, an innovative two-dimensional (2D) lateral anatase-rutile TiO2 phase junctions with controllable oxygen vacancies perpendicularly aligned on Ti mesh is presented. Our experimental observations and theoretical calculations corroborate explicitly that the 2D lateral phase junctions together with three-dimensional arrays not only exhibit the high-efficient photogenerated charges separation guaranteed by the build-in electric field at the side-to-side interface, but also furnish enriching active sites. Moreover, the interfacial oxygen vacancies generate new defect energy levels and serve as electron donors, hence extending visible light response and further accelerating the separation and transfer of photogenerated charges. Profiting from these merits, the optimized photoelectrode yield a pronounced photocurrent density of 1.2 mA/cm2 at 1.23 V vs. RHE with Faradic efficiency of 100%, which is approximately 2.4 times larger than that of pristine 2D TiO2 nanosheets. Furthermore, the incident photon to current conversion efficiency (IPCE) of the optimized photoelectrode is also boosted within both ultraviolet and visible light regions. This research is envisioned deliver the new insight in developing the novel 2D lateral phase junctions for PEC applications.

Hierarchical Interconnected NiMoN with Large Specific Surface Area and High Mechanical Strength for Efficient and Stable Alkaline Water/Seawater Hydrogen Evolution.

NiMo-based nanostructures are among the most active hydrogen evolution reaction (HER) catalysts under an alkaline environment due to their strong water dissociation ability. However, these nanostructures are vulnerable to the destructive effects of H2 production, especially at industry-standard current densities. Therefore, developing a strategy to improve their mechanical strength while maintaining or even further increasing the activity of these nanocatalysts is of great interest to both the research and industrial communities. Here, a hierarchical interconnected NiMoN (HW-NiMoN-2h) with a nanorod-nanowire morphology was synthesized based on a rational combination of hydrothermal and water bath processes. HW-NiMoN-2h is found to exhibit excellent HER activity due to the accomodation of abundant active sites on its hierarchical morphology, in which nanowires connect free-standing nanorods, concurrently strengthening its structural stability to withstand H2 production at 1 A cm-2. Seawater is an attractive feedstock for water electrolysis since H2 generation and water desalination can be addressed simultaneously in a single process. The HER performance of HW-NiMoN-2h in alkaline seawater suggests that the presence of Na+ ions interferes with the reation kinetics, thus lowering its activity slightly. However, benefiting from its hierarchical and interconnected characteristics, HW-NiMoN-2h is found to deliver outstanding HER activity of 1 A cm-2 at 130 mV overpotential and to exhibit excellent stability at 1 A cm-2 over 70 h in 1 M KOH seawater.

Retention and Turnover of Social Workers in China: Experimental Evidence from Beijing.

PURPOSE: The aim of this study was to identify the critical factors that influenced the turnover and retention of social workers and to propose strategies for enhancing professional social work teams. METHOD: A discrete-choice experiment (DCE) method was employed to approach to assess social workers' preferences regarding both income-related and non-income-related factors affecting their willingness to remain or leave their positions. RESULTS: Both income-related and non-income-related measures significantly affected social workers' the willingness to retain in their roles. Specifically, increasing the base salary had a stronger effect compared to performance pay. Among the non-income factors, providing career development opportunities had the strongest effect, followed by improving management, while honors had the weakest effect. Furthermore, it was observed that the effects of these improvements varied depending on the social workers' backgrounds and the types of social work clubs they were associated with. For instance, promoting career development was found to be more effective in well-developed clubs, while income incentives appeared to be more impactful in less developed clubs. DISCUSSION AND CONCLUSION: The study highlighted the importance of both income-related measures and non-income factors in addressing the issue of turnover and promoting stability within professional social work teams. Additionally, the observed heterogeneity in the effects of these improvements emphasized the need for tailored retention strategies that consider the diverse backgrounds of social workers and the specific organizational contexts they operate in.

Ultra-High Sensitivity and Temperature-Insensitive Optical Fiber Strain Sensor Based on Dual Air Cavities.

This study proposed an all-fiber Fabry-Perot interferometer (FPI) strain sensor with two miniature bubble cavities. The device was fabricated by writing two axial, mutually close short-line structures via femtosecond laser pulse illumination to induce a refractive index modified area in the core of a single-mode fiber (SMF). Subsequently, the gap between the two short lines was discharged with a fusion splicer, resulting in the formation of two adjacent bubbles simultaneously in a standard SMF. When measured directly, the strain sensitivity of dual air cavities is 2.4 pm/µÎµ, the same as that of a single bubble. The measurement range for a single bubble is 802.14 µÎµ, while the measurement range for a double bubble is 1734.15 µÎµ. Analysis of the envelope shows that the device possesses a strain sensitivity of up to 32.3 pm/µÎµ, which is 13.5 times higher than that of a single air cavity. Moreover, with a maximum temperature sensitivity of only 0.91 pm/°C, the temperature cross sensitivity could be neglected. As the device is based on the internal structure inside the optical fiber, its robustness could be guarantee. The device is simple to prepare, highly sensitive, and has wide application prospects in the field of strain measurement.

Impact of endoscopic thoracic R4 sympathicotomy combined with R3 ramicotomy for primary palmar hyperhidrosis.

Background: Endoscopic thoracoscopic sympathectomy (ETS) is the preferred method for treating primary palmar hyperhidrosis (PPH) that bears the risk of compensatory hyperhidrosis (CH) following surgery. The current study aims to evaluate the effectiveness and safety of an innovative surgical procedure of ETS. Methods: A survey of the clinical data of 109 patients with PPH who underwent ETS in our department from May 2018 to August 2021 was retrospectively conducted. The patients were organized into two groups. Group A underwent R4 sympathicotomy combined with R3 ramicotomy. Group B underwent R3 sympathicotomy. Patients were followed up to evaluate the safety, effectiveness and the incidence of postoperative CH of the modified surgical approach. Results: A total of 102 patients completed follow-up, and seven of the total enrolled patients were lost to follow-up, with a loss rate of 6% (7/109). Among these, Group A constitutes 54 cases, group B constitutes 48 cases, and the mean follow-up was 14 months (interquartile range 12-23 months). There was no statistically difference in surgical safety, postoperative efficacy, and postoperative quality of life (QoL) score between group A and group B (p > 0.05). The score of the psychological assessment was higher (p = 0.004) in group A (14.15 ± 2.06) compared to group B (13.30 ± 1.86). The incidence of CH in group A was lower than in group B (p = 0.019). Conclusion: R4 sympathicotomy combined with R3 ramicotomy is safe and effective for PPH treatment, along with a reduced incidence of postoperative CH rate and improved postoperative psychological satisfaction.

[Association between early-life factors and pubertal timing in girls]. / ç”Ÿå‘½æ—©æœŸå› ç´ ä¸Žå¥³ç”Ÿé’æ˜¥å‘åŠ¨æ—¶ç›¸çš„å ³è”åˆ†æž.

OBJECTIVES: To study the association between early-life factors (including birth weight, method of birth, gestational age, and history of gestational metabolic disorders) and pubertal timing in girls. METHODS: The stratified cluster sampling method was used to select the girls in grades 2-3 and 7-8 from three primary schools and three middle schools in Guangzhou, China from March to December, 2019, and breast development was examined for all girls. A questionnaire survey was performed to collect the information on early-life factors. The multivariate logistic regression model was used to evaluate the association of gestational metabolic disorders, birth weight, method of birth, and gestational age with pubertal timing in girls. The Bootstrap method was used to assess the mediation effect of body mass index (BMI) (Z score) between high birth weight (≥4 000 g) and pubertal timing. RESULTS: A total of 1 665 girls were enrolled, among whom 280 (16.82%) were judged to have early pubertal timing. The multivariate logistic regression analysis showed that high birth weight was associated with the increased risk of early pubertal timing (OR=2.12, 95%CI: 1.19-3.66, P=0.008). Nevertheless, no significant association was observed between other early-life factors and pubertal timing (P>0.05). The OR for the mediation effect of BMI (Z score) between high birth weight and early pubertal timing was 1.25 (95%CI: 1.09-1.47), accounting for 29.33% of the total effect of high birth weight on early pubertal timing. CONCLUSIONS: High birth weight is associated with the increased risk of early pubertal timing in girls, and overweight/obesity may play a partial mediating role in the association between high birth weight and early pubertal timing in girls.

Prognostic value of NOX2 as a potential biomarker for lung adenocarcinoma using TCGA and clinical validation.

Lung adenocarcinoma (LUAD) is associated with high morbidity and mortality; therefore, effective biomarkers are essential. In recent years, a rapid increase in the efficiency of high­throughput sequencing technologies and the continuous improvement of comprehensive online databases have facilitated the study of the genomic changes that affect tumor progression, including the identification of tumor biomarkers. Therefore, the identification of genes that may affect the progression and prognosis of LUAD is necessary. In the present study, the CIBERSORT and ESTIMATE bioinformatics packages were used to evaluate data from The Cancer Genome Atlas, including assessment of the proportion of tumor­infiltrating immune cells in the tumor microenvironment, Cox regression analysis of differentially expressed genes and cross analysis of protein­protein interaction networks. Myeloid cell NADPH oxidase isoform 2 (NOX2), an indispensable gene in the immune system, was demonstrated to serve a vital role in LUAD pathogenesis. Western blotting and immunohistochemistry confirmed that, at the protein level, NOX2 expression was increased in normal cells compared with cancer cells. Furthermore, reverse transcription­quantitative PCR results at the mRNA level were consistent with these results, which confirmed that the abundance of NOX2 was significantly reduced in LUAD patients. NOX2 may be used as a novel marker and an independent prognostic indicator of LUAD. Its potential function was enriched in tumor immune and metabolic signaling pathways, which could provide clues for the study of the signaling pathways and molecular networks related to the disease progression of LUAD, which would be helpful for the assessment of prognosis in the clinical setting.

Exploring the role of protein DJ-1 in quality of pale, soft and exudative (PSE) and red, firm and non-exudative (RFN) pork during post-mortem aging.

The purpose of this study was to investigate the changes of oxidative attributes, protein DJ-1 expression, oxidized form (oxDJ-1), and cellular localization in RFN and PSE pork meat during the post-mortem aging. The longissimus thoracis of RFN and PSE groups were collected and classified by determination of pH, color and purge loss and then aged for 1, 3 and 7 d at 4 °C postmortem. Results showed that the content of DJ-1 and oxDJ-1 was continuously increased during 7 d of postmortem aging. A relatively higher protein DJ-1, oxDJ-1, oxygen reactive species and disulfide bond contents were found in PSE meat in comparison to RFN meat. Immunostaining showed that protein DJ-1 was located in cytoplasm, membrane and some nucleus of muscle cells. DJ-1 was shown to correlate with meat quality and oxidative attributes, suggesting a regulatory role in resisting oxidative stress and meat quality formation during post-mortem aging.

Association of body composition with pubertal timing in children and adolescents from Guangzhou, China.

Objective: An ongoing debate surrounds the relationship between body composition and pubertal timing, in particular for boys. This cross-sectional study aimed to investigate the association of body composition with pubertal timing among children and adolescents. Methods: A total of 1,493 boys and 1,261 girls who entered puberty were enrolled in Guangzhou, China. Tanner stages were evaluated by examination of breast development for girls and testicular volume for boys. Fat mass (FM) and fat-free mass (FFM) were determined by bioelectrical impedance analysis. Parameters for body composition were transformed into age-and gender-specific Z-scores. The association of body composition with pubertal timing was examined using multinomial logistic regression with inverse probability weighting (IPW) based on the propensity score. Results: For boys, IPW analysis showed Z-scores of body fat percentage (BF%) and FM index (FMI) were negatively associated with early puberty (OR = 0.75, 95% CI = 0.64-0.87; OR = 0.74, 95% CI = 0.63-0.88). As for girls, in contrast to boys, positive associations were seen between BF% and FMI with early puberty (OR = 1.39, 95% CI = 1.19-1.64; OR = 1.59, 95% CI = 1.33-1.90). With respect to appendicular skeletal muscle mass index (ASMI), there was a positive association with early puberty and a negative one with late puberty in boys (OR = 1.26, 95% CI = 1.07-1.49; OR = 0.82, 95% CI = 0.69-0.99). Conclusion: There is a positive association of FM with early puberty for girls while negative for boys. FFM yields a positive association with early puberty and a negative one with late puberty in boys, but not in girls. Our findings highlight the gender differences in the connection between body composition and pubertal onset.

Prevalence of left iliac vein compression in an asymptomatic population and patients with left iliofemoral deep vein thrombosis: A multicenter cross-sectional study in southern China.

OBJECTIVE: Population-based epidemiological data on left common iliac vein (LCIV) compression is scarce. This study aimed to investigate the prevalence of LCIV compression in an asymptomatic population and patients with left iliofemoral deep vein thrombosis (IF-DVT). MATERIALS AND METHODS: Nonprobability sampling method was used in this multicenter cross-sectional study. The minimum diameter of LCIV and right common iliac vein minimum were measured. The percentage of LCIV compression (LCIV-CP) was calculated. Compression severity (CS) was classified as mild (CP ≤ 50%), moderate (50% < CP ≤ 70%), and severe (CP > 70%). RESULTS: In all, 896 subjects constituted the asymptomatic population and 93 patients constituted the IF-DVT population. In the asymptomatic population, LCIV-CP ranged from 1.1% to 89.9% (mean 44.0%), and people with mild, moderate, and severe CS accounted for 62.3%, 28.2%, and 9.5%, respectively. In the IF-DVT population, the mean LCIV-CP was 71.1% (range 42.2%-95.2%), and patients with severe CS accounted for 75.3%. Gender and age differences in LCIV-CP and CS distribution were observed in the asymptomatic population. Females, the young- and middle-aged group had higher LCIV-CPs. In the population with moderate-severe CS, the middle-aged group accounted for a larger proportion. Middle-aged females comprised the highest percentage of patients with moderate or severe CS. Sex and age affected the LCIV-CP and CS distribution. No gender and age differences were observed in the IF-DVT population. CONCLUSIONS: LCIV compression is common in population. Middle-aged females are the predominant population with moderate-severe compression. Overlapping of LCIV-CP in the asymptomatic and IF-DVT population is significant and other risk factors should be integrated into the consideration when assessing the risk of IF-DVT secondary to LCIV compression.

Electronic Structure Regulation of Nickel Phosphide for Efficient Overall Water Splitting.

Rational design and fabrication of efficient and low-cost catalysts for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are crucial for hydrogen production from water electrolysis. Herein, we report heteroatom Fe-incorporated Ni5P4 (Fe-NiP) as an excellent bifunctional catalyst for overall water splitting. Density functional theory (DFT) calculations reveal that heteroatom Fe effectively steers the electronic structure of Ni5P4, which optimizes the hydrogen adsorption behavior. Additionally, the hierarchical conductive framework of Fe-NiP contributes to abundant active sites. Thus, the Fe-NiP catalyst shows robust performance with enhanced intrinsic catalytic activity. As a good bifunctional catalyst, it demands low overpotentials of 144 and 223 mV to deliver a current density of 10 mA cm-2 for HER and OER, respectively. Considering the good bifunctional activity, an outstanding electrolyzer has been successfully assembled, which is superior to the benchmark of a RuO2(+)//Pt/C(-) electrolyzer. This study sheds light on steering the electronic structure of electrocatalysts through a heteroatom modulation strategy.

Effect of nitric oxide treatment on pork meat quality, microstructure, and total bacterial count during postmortem aging.

In this paper, the potential effect of nitric oxide (NO) on improving the fresh meat quality of pork was primarily investigated by treatment of longissimus thoracis (LT) with 0, 20, 40, 60, 80 µL/L NO gas within 6 h post-slaughter. After the NO treatments were completed, the pork chops were vacuum-packaged and stored at 4 °C for 1, 4, and 7 d. Compared with the control group, NO treatment enhanced ultimate pH and a* value, and decreased the total bacterial count. The meat treated with 40 and 60 µL/L NO presented higher water holding capacity (WHC), lower shear force and meat hardness with more unconsolidated muscle cell structure. Though 80 µL/L NO treatment achieved better color and microbial attributes, it had a negative effect on WHC and tenderness. Our data suggest that NO treatment is able to improve pork meat quality in a dose-dependent manner.

Capsaicin Prevents Contrast-Associated Acute Kidney Injury through Activation of Nrf2 in Mice.

Capsaicin, a transient receptor potential vanilloid 1 channel agonist, possesses antioxidative properties through activating nuclear factor-erythroid 2-related factor 2 (Nrf2). As oxidative stress is a major contributor to the development of contrast-associated acute kidney injury (CA-AKI), we investigated the protective effect of capsaicin against CA-AKI via Nrf2. C57BL/6J mice were treated with dehydration and iodixanol to establish the model of CA-AKI. For pretreatment, capsaicin (0.3 mg/kg) was given via intraperitoneal injection one hour before iodixanol injection. Nrf2-specific siRNA was given through the tail vein to knock down Nrf2. The CA-AKI mouse model had remarkable mitochondrial fragmentation and dysfunction and apoptosis of tubular cells, overproduction of superoxide in renal tubules, increased renal malondialdehyde, tubular epithelial cell injury, and renal dysfunction. Importantly, pretreatment with capsaicin significantly ameliorated tubular cell injury and renal dysfunction with decreased superoxide, renal malondialdehyde, and apoptotic tubular cells and improved mitochondrial morphology and function in the CA-AKI mouse model. The expression of Nrf2 was increased in the kidney from the CA-AKI mouse model and was further enhanced by capsaicin. Administration of siRNA through the tail vein successfully decreased Nrf2 expression in the kidney, and knockdown of Nrf2 by siRNA abolished the beneficial effects of capsaicin on CA-AKI. The present study demonstrated a protective effect of capsaicin pretreatment against CA-AKI via Nrf2.

Improvement strategies for quality defects and oxidation of pale, soft and exudative (PSE)-like chicken meat: effects of domestic cooking and core temperature.

This study compared the quality, oxidation, and microstructure of high-market-share PSE-like chicken meat (PSE) after domestic cooking with those of normal chicken meat (NOR). Cooking techniques included steaming (ST), boiling (BO), roasting (RO), and microwaving (MV) at 60, 70, and 80 °C. The results indicated that PSE-induced chicken breasts were of poor quality, with significantly higher cooking loss rates (NOR: 22.1% vs. PSE: 26.2%) and shear force (NOR: 50.4 N vs. PSE: 69.2 N) than normal chicken meat. In addition, PSE-like chicken meat showed higher oxidative sensitivity and more severe muscle fiber structure damage. Among the four cooking techniques, RO increased meat toughness (NOR: 78.5 N vs. PSE: 98.3 N) and intensified excessive protein oxidation and aggregation in PSE chicken breast most significantly, manifested by the increased malondialdehyde (NOR: 0.46 vs. PSE: 0.57, mg kg-1 meat) and carbonyl (NOR: 11.2 vs. PSE: 13.4, nmol mg-1 protein), reduced tryptophan and thiols (NOR: 41.3 vs. PSE: 33.7, nmol mg-1 protein), and prominent protein cross-linking such as Schiff bases and disulfide bonds during heat treatment (p < 0.05). BO was the second most destructive technique, while MV caused the least impact (p > 0.05). Principal component analysis indicated a correlation between oxidative damage and meat quality, which was attributed to variations of the PSE and normal samples by BO, RO, and ST treatments. Thus, MV is suggested to be a promising and effective cooking method in reducing the differences in quality and oxidation attributes between PSE and normal chicken meat.

Structural characterizations on the degradation of 2D organic-inorganic hybrid perovskites and its enlightenment to improved stability.

Despite the demonstrated high-efficiency of solar cells and light-emitting devices based on two-dimensional (2D) perovskites, intrinsic stability of the 2D perovskites is yet far from satisfactory. In this work, we find the 2D (BA)2PbI4perovskite crystals rapidly degrade in the ambient conditions and the photoluminescence (PL) nearly completely quenches in 6 d. Moreover, the PL shoulder band due to defects and absorption band of PbI2gradually rise during degradation, suggesting the precipitation of PbI2. Besides, rod structures are observed in the degraded crystals, which are attributed to the formation of one-dimensional (1D) (BA)3PbI5perovskites. And the degradation can be largely retarded by decreasing the humidity during storage. Therefore, a chemical reaction for the degradation of (BA)2PbI4is proposed, revealing the interactions between water molecules and undercoordinated defects are very critical for understanding the degradation. Enlightened by these findings, dimethyl itaconate (DI) treatment is developed to passivate the defects and block the intrusion of moisture to improve the stability of the (BA)2PbI4. After storage in the ambient environment for 16 d, the DI treated (BA)2PbI4only shows a slight surface degradation without formation of any nanorod-like structures, and the PL intensity retains about 70%. Therefore, our systematic study provides a comprehensive understanding on the degradation dynamics of 2D perovskites, which will promote future development of intrinsically stable 2D perovskites.