An ultrasensitive solid-state electrochemiluminescence sensor based on Ni-MOF@Ru(bpy)32+ and Au NPs@TiO2 for determination of permethrin.

The novel TiO2 and Ni-MOF materials were synthesized and utilized for the detection of permethrin (PET). A highly sensitive solid-state electrochemiluminescence (ECL) sensor was developed based on Ni-MOF@Ru(bpy)32+ and Au NPs@TiO2. In this sensing platform, Ru(bpy)32+-Tripropyl Amine (TPrA) was used as a luminescent signal, Ni-MOF acted as a carrier to carry more luminescent reagents Ru(bpy)32+. Au NPs acted as promoters facilitated electron transport and TiO2 could further enhance the luminescence intensity of the system by synergistical interaction with Au NPs. The possible mechanisms of signal amplification were investigated. The ECL intensity decreased significantly with increasing PET concentration, enabling the determination of PET amount through the observation of the change in ECL signal intensity (ΔI). Under optimal experimental conditions, the linear range of PET concentration from 1.0 × 10-11 mol L-1 to 1.0 × 10-6 mol L-1, with a detection limit of 3.3 × 10-12 mol L-1 (3S/N). This method was successfully applied to determine PET in various vegetable samples.

A molecule-imprinted electrochemiluminescence sensor based on CdS@MWCNTs for ultrasensitive detection of fenpropathrin.

A molecularly-imprinted electrochemiluminescence sensor was constructed for the determination of fenpropathrin (FPT) by molecular imprinting technology. In this sensing platform, the introduction of CdS@MWCNTs significantly enhanced the initial ECL signal of the luminol-O2 system. Specifically, MWCNTs was used as a carrier to adsorb more CdS, in which CdS acted as a co-reaction promoter for luminescence. Molecularly imprinted polymer (MIP) containing specific recognition sites of FPT was used as the material for selective recognition. With increasing amount of FPT the ECL signal decreased. Under the optimum conditions, the ECL response was linearly related to the logarithm of FPT concentration. The developed ECL sensor allowed for sensitive determination of FPT and exhibited a wide linear range from 1.0 × 10- 10 mol L- 1 to 1.0 × 10- 6 mol L- 1. The limit of detection was 3.3 × 10- 11 mol L- 1 (S/N = 3). It can be used for the detection of FPT in vegetable samples.

Ultrasensitive solid-state electrochemiluminescence sensor based on lotus root shaped carbon fiber, CdSe QDs and Fe3O4 synergically amplify Ru(bpy)32+ luminophore signal for detection of cyfluthrin.

An efficient and innovative electrochemiluminescence (ECL) sensor was developed for trace detection of cyfluthrin. The sensor utilized materials such as lotus root shaped carbon fiber (Co CNFs), cadmium selenide quantum dots (CdSe QDs), and Fe3O4 to amplify Ru(bpy)32+ signals. Co CNFs, with its large specific surface area and porosity, served the purpose of not only enhancing the stability of the sensor by fixing CdSe QDs and Ru(bpy)32+ on the Co CNFs/GCE, but also facilitating electron transfer. CdSe QDs was involved in the luminescence reaction and collaborated with Ru(bpy)32+ to enhance the sensor's sensitivity, while Fe3O4 promoted electron transfer in the system due to its large surface area. The solid-state ECL sensor achieved satisfactory signal under the synergistic action of these components. The ECL signal of the sensor was quenched by cyfluthrin, and a favorable linear relationship was observed between the sensor and cyfluthrin in the concentration range 1 × 10-12 to 1 × 10-6 M. The detection limit of the sensor was 3.3 × 10-13 M (S/N = 3). The utilization of lotus root shaped carbon fiber, CdSe QDs, and Fe3O4 in the Ru(bpy)32+ system demonstrated a synergistic effect for cyfluthrin detection, presenting a new approach for the rapid determination analysis of pesticide residues in foods.

Electrochemiluminescent assay based on Co-MOF and TiO2 for determination of bisphenol A.

An electrochemiluminescence (ECL) sensor for determining bisphenol A (BPA) was prepared based on titanium dioxide (TiO2) and Co-MOF. TiO2 is a co-reaction promoter that amplifies the ECL signal in the Ru(bpy)32+-trinpropylamine (TPrA) system. When the electrode is modified with Co-MOF the ECL signal is significantly enhanced. This is because Co-MOF can not only be used as a co-reaction accelerator but also as a carrier to adsorb more luminescent substances. Possible mechanisms for amplifying the original signal through the synergistic action of the two substances are investigated. The ECL strength decreases with increasing concentrations of BPA, and the amount of BPA can be determined by the change in ECL signal strength (ΔI). Under optimal experimental conditions, the linear range of BPA was 2.0 × 10-10 to 2.0 × 10-5 M, with a determination limit of 6.7 × 10-11 M (3σ/m). The relative standard deviation (RSD) of the signal for ten consecutive measurements was 1.5%. The sensor can be used to detect BPA in bottled samples with recoveries of 96 to 105%.

Electrospun nanofibers containing CdTe@ZnNi-MOF for electrochemiluminescent determination of chlorpyrifos.

Electrospun nanofibers containing CdTe@ZnNi-metal-organic frameworks (CdTe@ZnNi-MOF NFs) were used for the first time in luminol-O2 electrochemiluminescence (ECL) system to construct ECL sensor for chlorpyrifos (CPF) detection. Firstly, CdTe@ZnNi-MOF NFs obtained by blending method was used to modify the surface of a glassy carbon electrode, and then, the proposed solid-state ECL sensor was constructed by dropping luminol onto the surface of nanofiber benefiting from chitosan (CTS) viscosity. CdTe@ZnNi-MOF NFs with its large surface area and porosity can be used not only as luminol carrier but also as co-reaction promoter of the ECL system. The ECL sensor obtained satisfactory results in weakly alkaline solution under the synergistic action of CdTe@ZnNi-MOF NFs and luminol. The constructed ECL sensor can effectively detect CPF in the range 1.0 × 10-14-1.0 × 10-9 M, and the detection limit was 6.23 × 10-17 M (3σ/m). The constructed sensor was simple and sensitive, and can be used for the determination of CPF in vegetable samples. It not only broadened the application of MOFs in the field of ECL but also provided a new idea for expanding the application of the luminol-O2 system.

An electrochemiluminescence sensor for sensitive detection of malathion based on g-C3N4-CdTe composite nanomaterials.

A self-enhanced electrochemical luminescence (ECL) composite material g-C3N4-CdTe QDs was prepared. The combination of g-C3N4 and CdTe QDs can amplify the ECL signal and improve the stability. Based on this discovery, g-C3N4-CdTe QDs and acetylcholine esterase (AChE) were used to construct an ECL sensor for organophosphorus pesticides (OP) detection. The sensor showed a strong initial ECL signal in PBS containing S2O82-. It is because that g-C3N4 not only acts as a co-reaction promoter to amplify the ECL signal of the CdTe QDs/S2O82- system but also acts as a carrier with large specific surface area to adsorb more CdTe QDs and improve the sensitivity of the sensor. The reaction of AChE and acetylthiocholine (ATCl) was hindered by organophosphorus pesticides (OPs). The ECL signal was enhanced by the addition of OPs, and a linear relationship was displayed between the increasing value and the concentration of malathion. A good linear range from 2.52 × 10-13 to 2.52 × 10-8 mol L-1 was obtained and the limit of detection was 8.4 × 10-14 mol L-1 under optimized experimental conditions. The results indicated that the sensor had promising applications for the detection of OPs in vegetable samples.

Degradation characteristics of p-nitrophenol and atenolol by carbon nitride modified by graphene quantum dots.

Photocatalysis is a promising technology for wastewater treatment. It is of great significance to find catalysts with high photoactivity. In this paper, a catalyst with high photocatalytic degradation efficiency to organic wastewater, carbon nitride modified by graphene quantum dots (SCN-GQDX), is prepared by supramolecular self-assembly thermal polycondensation method and doping graphene quantum dots (GQDs). The results show that SCN-GQD0.5 has the best catalytic performance, and its photocatalytic degradation efficiency to organic pollutants can reach 86% and still remains above 83% after five cycles, which shows the modified carbon nitride has high catalytic efficiency and stability. In a word, SCN-GQDX is a highly efficient, non-toxic and stable photocatalyst for organic pollutants in wastewater.

Motor Imagery EEG Classification Based on Decision Tree Framework and Riemannian Geometry.

This paper proposes a novel classification framework and a novel data reduction method to distinguish multiclass motor imagery (MI) electroencephalography (EEG) for brain computer interface (BCI) based on the manifold of covariance matrices in a Riemannian perspective. For method 1, a subject-specific decision tree (SSDT) framework with filter geodesic minimum distance to Riemannian mean (FGMDRM) is designed to identify MI tasks and reduce the classification error in the nonseparable region of FGMDRM. Method 2 includes a feature extraction algorithm and a classification algorithm. The feature extraction algorithm combines semisupervised joint mutual information (semi-JMI) with general discriminate analysis (GDA), namely, SJGDA, to reduce the dimension of vectors in the Riemannian tangent plane. And the classification algorithm replaces the FGMDRM in method 1 with k-nearest neighbor (KNN), named SSDT-KNN. By applying method 2 on BCI competition IV dataset 2a, the kappa value has been improved from 0.57 to 0.607 compared to the winner of dataset 2a. And method 2 also obtains high recognition rate on the other two datasets.

Radiation-Induced Bystander Effects in A549 Cells Exposed to 6 MV X-rays.

The aim of the study is to explore the bystander effects in A549 cells that have been exposed to 6MV X-ray. Control group, irradiated group, irradiated conditioned medium (ICM)-received group, and fresh medium group were designed in this study. A549 cells in the logarithmic growth phase were irradiated with 6MV X-ray at 0, 0.5, 1, 1.5, and 2. In ICM-received group, post-irradiation A549 cells were cultured for 3 h and were transferred into non-irradiated A549 cells for further cultivation. Clone forming test was applied to detect the survival fraction of cells. Annexin V-FITC/PI double-staining assay was used to detect the apoptosis of A549 cells 24, 48, 72, and 96 h after 2-Gy 6MV X-ray irradiation, and the curves of apoptosis were drawn. The changes in the cell cycles 4, 48, 72, and 96 h after 2-Gy 6MV X-ray irradiation were detected using PI staining flow cytometry. With the increase of irradiation dose, the survival fraction of A549 cells after the application of 0.5 Gy irradiation was decreasing continuously. In comparison to the control group, the apoptosis rate of the ICM-received group was increased in a time-dependent pattern, with the highest apoptosis rate observed at 72 h (p < 0.05). Cell count in G2/M stages was obviously increased compared with that of the control group (p < 0.05), with the highest count observed at 72 h, after which G2/M stage arrest was diminished. ICM can cause apparent A549 cell damage, indicating that 6MV X-ray irradiation can induce bystander effect on A549 cells, which reaches a peak at 72 h.

Hypoxia induces BMP-2 expression via ILK, Akt, mTOR, and HIF-1 pathways in osteoblasts.

It has been shown that hypoxia stimulation regulates bone formation, maintenance, and repair. Bone morphogenetic protein (BMP) plays important roles in osteoblastic differentiation and bone formation. However, the effects of hypoxia exposure on BMP-2 expression in cultured osteoblasts are largely unknown. Here we found that hypoxia stimulation increased mRNA and protein levels of BMP-2 by qPCR, Western blot and ELISA assay in osteoblastic cells MG-63, hFOB and bone marrow stromal cells M2-10B4. Integrin-linked kinase (ILK) inhibitor (KP-392), Akt inhibitor (1L-6-hydroxymethyl-chiro-inositol-2-[(R)-2-O-methyl-3-O-octadecylcarbonate]) or mammalian target of rapamycin (mTOR) inhibitor (rapamycin) inhibited the potentiating action of hypoxia. Exposure to hypoxia increased the kinase activity of ILK and phosphorylation of Akt and mTOR. Furthermore, hypoxia also increased the stability and activity of HIF-1 protein. The binding of HIF-1alpha to the HRE elements after exposure to hypoxia was measured by EMSA assay. Moreover, the use of pharmacological inhibitors or genetic inhibition revealed that both ILK/Akt and mTOR signaling pathway were potentially required for hypoxia-induced HIF-1alpha activation and subsequent BMP-2 up-regulation. Taken together, our results provide evidence that hypoxia enhances BMP-2 expression in osteoblasts by an HIF-1alpha-dependent mechanism involving the activation of ILK/Akt and mTOR pathways.

Glial cell-derived neurotrophic factor increases migration of human chondrosarcoma cells via ERK and NF-kappaB pathways.

Invasion of tumor cells is the primary cause of therapeutic failure in the treatment of malignant chondrosarcomas. Glial cell-derived neurotrophic factor (GDNF) plays a crucial role in migration and metastasis of human cancer cells. Integrins are the major adhesive molecules in mammalian cells. Here we found that GDNF directed the migration and increased cell surface expression of alphav and beta3 integrin in human chondrosarcoma cells. Pretreated of JJ012 cells with MAPK kinase (MEK) inhibitors PD98059 or U0126 inhibited the GDNF-mediated migration and integrin expression. Stimulation of cells with GDNF increased the phosphorylation of MEK and extracellular signal-regulating kinase (ERK). In addition, NF-kappaB inhibitor (PDTC) or IkappaB protease inhibitor (TPCK) also inhibited GDNF-mediated cells migration and integrin up-regulation. Stimulation of cells with GDNF induced IkappaB kinase (IKKalpha/beta) phosphorylation, IkappaB phosphorylation, p65 Ser(536) phosphorylation, and kappaB-luciferase activity. Furthermore, the GDNF-mediated increasing of kappaB-luciferase activity was inhibited by PD98059, U0126, PDTC and TPCK or MEK, ERK, IKKalpha, and IKKbeta mutants. Taken together, these results suggest that the GDNF acts through MEK/ERK, which in turn activates IKKalpha/beta and NF-kappaB, resulting in the activations of alphavbeta3 integrin and contributing the migration of human chondrosarcoma cells.

Leptin enhances cell migration in human chondrosarcoma cells through OBRl leptin receptor.

Leptin, an adipocyte-derived cytokine that is closely associated with obesity, has recently been shown to be involved in carcinogenesis and cancer progression. Integrins are the major adhesive molecules in mammalian cells and have been associated with metastasis of cancer cells. In this study, we found that leptin increased the migration and the expression of alphavbeta3 integrin in human chondrosarcoma cells. We also found that human chondrosarcoma tissues and chondrosarcoma cell lines had significant expression of the long form (OBRl) leptin receptor, which was higher than that in normal cartilage and human primary chondrocyte. Leptin-mediated migration and integrin upregulation were attenuated by OBRl receptor antisense oligonucleotide. Activations of insulin receptor substrate (IRS)-1, phosphatidylinositol 3-kinase (PI3K), Akt and nuclear factor-kappaB (NF-kappaB) pathways after leptin treatment were demonstrated, and leptin-induced expression of integrin and migration activity was inhibited by the specific inhibitor, small-interfering RNA and mutant of IRS-1, PI3K, Akt and NF-kappaB cascades. Taken together, our results indicated that leptin enhances the migration of chondrosarcoma cells by increasing alphavbeta3 integrin expression through the OBR1/IRS-1/PI3K/Akt/NF-kappaB signal transduction pathway.