Prussian blue analogue assisted formation of iron doped CoNiSe2 nanosheet arrays for efficient oxygen evolution reaction.

Electrochemical water splitting is a promising approach to produce hydrogen gas, but sluggish four-electron transfer of the oxygen evolution reaction (OER) severely limits the overall energy conversion efficiency of water splitting. Herein, as an excellent OER electrocatalyst, a technique of synthesizing Fe doped CoNiSe2 nanosheet (Fe-CoNiSe2) whole series using CoFe prussian blue analog produced by Co-ZIF-L reaction as a template is proposed here. The introduction of iron ions promotes the redistribution of the cobalt-nickel charge density, which enhances the OER kinetics. In view of the abovementioned points, Fe-CoNiSe2/NF has excellent activity, electrocatalytic properties and excellent stability in alkaline media, which only demands a lower overpotential of 244 mV and 271 mV to deliver a current density of 10 mA cm-2 and 50 mA cm-2, respectively. The material also exhibits excellent stability for at least 24 h during the OER process. This work may provide some new insights into the assembly of advanced and highly-active materials for a variety of other energy conversion applications.

Effects of novel functionalized magnesium phosphate monomers on the flame retardancy and mechanical properties of polyethylene terephthalate copolymers.

In this study, inorganic magnesium hydroxide (MH) was modified by three phosphoric acids respectively to obtain three different novel functionalized monomers. The chemical structure and morphology of (Pn-MH) were analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Further, functional monomers were introduced into the PET main chain structure. A new type of high-performance co-polyesters was successfully prepared. The specific structure of P1-MH-PET was characterized by 1H NMR spectroscopy. Thermal stability of Pn-MH-PETs was analyzed by thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). The flame retardant properties were evaluated by limiting oxygen index (LOI), vertical combustion test (UL-94) and cone calorimeter. The results show that the thermal stability and flame retardant properties of 5%Pn-MH-PETs are greatly improved. Among them, the best performance is 5%P1-MH-PET, LOI is 32.5%, UL-94 test reached V-0 grade. Compared with neat PET, the peak heat release rate (PHRR), peak smoke release rate (PSPR), carbon dioxide release rate (CO2PR) and carbon monoxide release rate (COPR) decreased by 57.0%, 38.1%, 54.6% and 57.3%, respectively. Fortunately, the mechanical properties of 5%P3-MH-PET were also improved.

Preparation and fertilizer retention/anti-leakage performances of superabsorbent composite based on hydroxypropyl methyl cellulose.

To reduce the preparation cost of superabsorbent composites (SACs) and improve the water and fertilizer retention properties of soil, hydroxypropyl methylcellulose grafted with acrylic acid, polyaspartic acid and palygorskite (HPMC-g-P(AA-co-PASP)/ATP) was synthesized by aqueous solution polymerization and used to reduce of preventing water leakage in soil. The structure, surface morphology and thermal stability of the optimized SACs were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy and thermal gravimetric analysis. Under optimum synthesis conditions, the maximum equilibrium absorption of SACs was 1785 g·g-1, 254 g·g-1, 138 g·g-1 in deionized water, tap water and NaCl solution (0.9 wt%) respectively. Application of the SACs to soils increased their water holding and water retention capacities. In addition, the reduced leaching of added urea and low water permeability of the treated soils indicated that the SACs has the potential for applications in future sustainable agriculture.

Preparation of a novel functionalized magnesium-based curing agent as an intrinsic flame retardant for epoxy resin.

In this study, a novel organic-inorganic hybrid flame retardant 10-(1,4-dicarboxylic acid magnesium salt)-9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DMMH) was synthesized via neutralization and addition reaction of maleic acid, magnesium hydroxide and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO), and subsequently used in an intrinsic flame retardant epoxy resin. The chemical structure and morphology of DMMH were analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Further, the prepared DMMH was combined with ammonium polyphosphate (APP) to form an intumescent flame retardant system. The thermal stability and flame retardance were evaluated by thermogravimetric analysis (TG), UL-94 vertical burning test, limiting oxygen index (LOI) and cone calorimetry. It was observed that the addition of 1.7% DMMH and 5.3% APP led EP-7 to acquire UL-94 V-0 rating, with the limiting oxygen index of 26.0%. As compared with pure EP, the peak heat release rate, total heat release, smoke production rate and total smoke production of the sample was noted to decrease by 54.5%, 35.1%, 43.6% and 38.1%, respectively. In addition, the introduction of DMMH did not negatively impact the mechanical properties of the epoxy resin.

Iron ion irradiated Bi2Te3 nanosheets with defects and regulated hydrophilicity to enhance the hydrogen evolution reaction.

The introduction of defects can enhance the active sites on transition metal dichalcogenides, which can cause changes in crystal structures, and then lead to a change in the original catalytic performance. Herein, an efficient method of introducing defects was reported. In this method, high-energy iron ions were irradiated on the surface of Bi2Te3 nanosheets by ion irradiation technology, which resulted in the generation of a variety of defects. Compared to the original Bi2Te3 nanosheets, the Bi2Te3 nanosheets irradiated by iron ions showed significant improvement in the hydrogen evolution reaction performance in acidic solution. After the iron ion irradiation, the electric double layer capacitance of the Bi2Te3 nanosheets increased significantly, which indicated an increase in the number of active sites on the surface of Bi2Te3. Analysis of high-resolution transmission electron microscopy images reveals the occurrence of various defects on the surface of Bi2Te3 after the iron ion irradiation, which increased the active sites. Moreover, the conductivity of the iron ion-irradiated Bi2Te3 nanosheets was also significantly improved. It is noteworthy that iron ion irradiation changed the characteristic of the Bi2Te3 surface from hydrophobic to hydrophilic, which facilitated the release of hydrogen bubbles from the catalyst surface and exposed the active sites in time. At the same time, the damage caused by the large bubbles to the electrode material could be avoided, and the stability of the material was improved. This efficient iron ion irradiation method provides an innovative idea for the design of other high-efficient catalysts.

Phosphorus-doped CoTe2/C nanoparticles create new Co-P active sites to promote the hydrogen evolution reaction.

Doping has been widely recognized as an effective method for adjusting the performance of electrocatalysts. It can cause changes in the electronic structure of substances. Thereby, it can affect the intrinsic catalytic performance. Herein, we report a facile doping method in which phosphorus can be simultaneously doped into both CoTe2 and C. In the acidic solution, the hydrogen evolution reaction (HER) performance of the obtained P-CoTe2/C nanoparticles was significantly improved compared with that of undoped nanoparticles. At a current density of 10 mA cm-2, the overpotential decreased from 430 mV to 159 mV. Density functional theory (DFT) calculations show that phosphorus doping can produce new high activity Co-P catalytic sites. In addition, phosphorus can be doped into the carbon in the composite at the same time, which enhances the electrical conductivity of the composite. Moreover, in the process of calcination and doping, the electric double layer capacitance (Cdl) of the composite is significantly increased, which helps in exposing more active sites. This work has developed a multi-effect doping method that simultaneously increases the intrinsic activity, conductivity and active sites of the material. This method provides a new strategy for the performance regulation of other electrocatalysts.

Biomimetic chitosan-graft-polypeptides for improved adhesion in tissue and metal.

Inspired by the mussel foot protein and chitosan-based macromolecular adhesives, a series of chitosan-graft-polypeptides were synthesized by ring-opening polymerization of three N-carboxyanhydrides (NCAs) - 3,4-dihydroxyphenylalanine-N-carboxyanhydride (DOPA-NCA), cysteine-NCA (Cys-NCA) and arginine-NCA (Arg-NCA) - using partial-NH2-protected chitosan as an initiator. These copolymers demonstrated good biodegradability and low cytotoxicity. The results of lap-shear adhesion test showed that the maximum lap-shear adhesion strength on the porcine skin and aluminum sheet were 195.97 ± 21.1 kPa and 3080 ± 320 kPa, respectively, and the maximum tensile adhesion strength on bone was 642.70 ± 61.1 kPa. The rat experiment in vivo showed that these copolymers exhibited good hemostatic performance and can promote the healing of skin wound and bone fracture. It is expected that thesecopolymeric adhesives will have broad applications in hemostasis and soft tissue adhesions.

Preparation and Enhanced Photocatalytic Properties of 3D Nanoarchitectural ZnO Hollow Spheres with Porous Shells.

By using ginkgo leaves (GL) as template and Zn(CH3COO)2∙2H2O as Zn source, a series of ZnO samples with special morphology were prepared via a template-assisted two-steps method without adding any other additives. The degradation of the dye MB was used to evaluate the photocatalytic property of the as-prepared samples. The results showed that when a proper amount of the template was used, a 3D nanoarchitectural ZnO hollow sphere with porous sphere shell assembled by well-distributed nanoparticles was obtained and its photocatalytic activity was much higher than that of ZnO nanoparticles. The special morphology of the sample was herein considered to be very helpful for highly efficient adsorption and activation of reactant molecules by multi-times adsorption-desorption-adsorption, efficient absorption of irradiation light by repeated absorption-reflection-absorption, and efficient separation of the photogenerated e--h⁺ pairs. In addition, the formation of 3D structure of sample ZnO was also discussed.

Mussel-Inspired Thermoresponsive Polypeptide-Pluronic Copolymers for Versatile Surgical Adhesives and Hemostasis.

Inspired by marine mussel adhesive proteins, polymers with catechol side groups have been extensively explored in industrial and academic research. Here, Pluronic L-31 alcoholate ions were used as the initiator to prepare a series of polypeptide-Pluronic-polypeptide triblock copolymers via ring-opening polymerization of l-DOPA-N-carboxyanhydride (DOPA-NCA), l-arginine-NCA (Arg-NCA), l-cysteine-NCA (Cys-NCA), and ε-N-acryloyl lysine-NCA (Ac-Lys-NCA). These copolymers demonstrated good biodegradability, biocompatibility, and thermoresponsive properties. Adhesion tests using porcine skin and bone as adherends demonstrated lap-shear adhesion strengths up to 106 kPa and tensile adhesion strengths up to 675 kPa. The antibleeding activity and tissue adhesive ability were evaluated using a rat model. These polypeptide-Pluronic copolymer glues showed superior hemostatic properties and superior effects in wound healing and osteotomy gaps. Complete healing of skin incisions and remodeling of osteotomy gaps were observed in all rats after 14 and 60 days, respectively. These copolymers have potential uses as tissue adhesives, antibleeding, and tissue engineering materials.

AIE-Active Tetraphenylethylene Cross-Linked N-Isopropylacrylamide Polymer: A Long-Term Fluorescent Cellular Tracker.

There is a great demand to understand cell transplantation, migration, division, fusion, and lysis. Correspondingly, illuminant object-labeled bioprobes have been employed as long-term cellular tracers, which could provide valuable insights into detecting these biological processes. In this work, we designed and synthesized a fluorescent polymer, which was comprised of hydrophilic N-isopropylacrylamide polymers as matrix and a hydrophobic tetraphenylethene (TPE) unit as AIE-active cross-linkers (DDBV). It was found that when the feed molar ratio of N-isopropylacrylamides to cross-linkers was 22:1, the produced polymers demonstrated the desirable LCST at 37.5 °C. And also, the temperature sensitivity of polymers could induce phase transfer within a narrow window (32-38 °C). Meanwhile, phase transfer was able to lead the florescent response. And thus, we concluded that two responses occur when one stimulus is input. Therefore, the new cross-linker of DDBV rendered a new performance from PNIPAm and a new chance to create new materials. Moreover, the resulted polymers demonstrated very good biocompatibility with living A549 human lung adenocarcinoma cells and L929 mouse fibroblast cells, respectively. Both of these cells retained very active viabilities in the concentration range of 7.8-125 µL/mg of polymers. Notably, P[(NIPAm)22-(DDBV)1] (P6) could be readily internalized by living cells with a noninvasive manner. The cellular staining by the fluorescent polymer is so indelible that it enables cell tracing for at least 10 passages.