Laser-Scribed Battery Electrodes for Ultrafast Zinc-Ion Energy Storage.

Aqueous Zn batteries are promising for large-scale energy storage applications but are plagued by the lack of high-performance cathode materials that enable high specific capacity, ultrafast charging, and outstanding cycling stability. In this work, we design a laser-scribed nano-vanadium oxide (LNVO) cathode that can simultaneously achieve these properties. Our material stores charge through Faradaic redox reactions on/near the surface at fast rates owing to the small grain size (2-6 nm) of vanadium oxide and interpenetrating three-dimensional (3D) graphene network, displaying a surface-controlled capacity contribution (90%-98%). Multiple characterization techniques unambiguously reveal that zinc and hydronium ions co-insert with minimal LNVO lattice change upon cycling. As a result, we demonstrate that a high specific capacity of 553 mAh g-1 can be achieved by the LNVO/Zn system at 0.1 A g-1 , and an impressive 264 mAh g-1 capacity can be retained at 100 A g-1 with a 10 s charge/discharge cycle, showing excellent rate capability. The LNVO/Zn is also capable of reaching >90% capacity retention after 3,000 cycles at a high rate of 30 A g-1, as well as achieving both high energy (369 Wh kg-1) and power densities (56,306 W kg-1). Moreover, the LNVO cathode retains its excellent cycling performance when integrated into quasi-solid-state pouch cells, further demonstrating mechanical stability and its potential for practical application in wearable and grid-scale applications. This article is protected by copyright. All rights reserved.

A nanoengineered vanadium oxide composite as a high-performance anode for aqueous Li-ion hybrid batteries.

Aqueous lithium-ion batteries (LIBs) have received increasing attention as a promising solution for stationary energy storage systems due to their low environmental impact, non-flammability and low cost. Despite recent progress in electrolyte development and cathode manufacturing, the lack of anode materials with high specific capacity presents difficult challenges for a wide range of applications. In this study, we propose a novel synthetic strategy to fabricate a pseudocapacitive V2O5/graphene composite as a highly functional anode material for aqueous LIBs. The designed synthesis combines a fast laser-scribing step with controlled calcination to tune the morphology and oxidation state of the electrochemically active vanadium oxide species while obtaining a highly conductive graphene scaffold. The optimized V2O5/graphene anode shows an outstanding specific capacity of 158 mA h g-1 in three-electrode measurements. When the V2O5/graphene anode is paired with an LiMn2O4 cathode, the charge storage mechanism of the full cell is revealed to be dominantly surface-controlled, resulting in remarkable rate performance. Specifically, the full cell can reach a specific capacity of 151 and 107 mA h (g anode)-1 at C/6 and 3C, respectively. Moreover, this hybrid battery can achieve a high power density and an energy density of 650 W kg-1 at 15.6 W h kg-1 and 81.5 W h kg-1 at 13.6 W kg-1, respectively, outperforming most aqueous LIBs reported in the literature. This innovative strategy provides a pathway to incorporate pseudocapacitive electrodes for improving aqueous lithium-ion storage systems, enabling safe operation of large-scale energy storage without compromising their electrochemical performance.

Reprecipitation: A Rapid Synthesis of Micro-Sized Silicon-Graphene Composites for Long-lasting Lithium-Ion Batteries.

Silicon microparticles (SiMPs) have gained significant attention as a lithium-ion battery anode material due to their 10 times higher theoretical capacity compared to conventional graphite anodes as well as their much lower production cost than silicon nanoparticles (SiNPs). However, SiMPs have suffered from poorer cycle life relative to SiNPs because their larger size makes them more susceptible to volume changes during charging and discharging. Creating a wrapping structure in which SiMPs are enveloped by carbon layers has proven to be an effective strategy to significantly improve the cycling performance of SiMPs. However, the synthesis processes are complex and time-/energy-consuming and therefore not scalable. In this study, a wrapping structure is created by using a simple, rapid, and scalable "modified reprecipitation method". Graphene oxide (GO) and SiMP dispersion in tetrahydrofuran is injected into n-hexane, in which GO and SiMP by themselves cannot disperse. GO and SiMP therefore aggregate and precipitate immediately after injection to form a wrapping structure. The resulting SiMP/GO film is laser scribed to reduce GO to a laser-scribed graphene (LSG). Simultaneously, SiOx and SiC protection layers form on the SiMPs through the laser process, which alleviates severe volume change. Owing to these desirable characteristics, the modified reprecipitation method successfully doubles the cycle life of SiMP/graphene composites compared to the simple physically mixing method (50.2% vs. 24.0% retention at the 100th cycle). The modified reprecipitation method opens a new synthetic strategy for SiMP/carbon composites.

A Rapid, Scalable Laser-Scribing Process to Prepare Si/Graphene Composites for Lithium-Ion Batteries.

Silicon has gained significant attention as a lithium-ion battery anode material due to its high theoretical capacity compared to conventional graphite. Unfortunately, silicon anodes suffer from poor cycling performance caused by their extreme volume change during lithiation and de-lithiation. Compositing silicon particles with 2D carbon materials, such as graphene, can help mitigate this problem. However, an unaddressed challenge remains: a simple, inexpensive synthesis of Si/graphene composites. Here, a one-step laser-scribing method is proposed as a straightforward, rapid (≈3 min), scalable, and less-energy-consuming (≈5 W for a few minutes under air) process to prepare Si/laser-scribed graphene (LSG) composites. In this research, two types of Si particles, Si nanoparticles (SiNPs) and Si microparticles (SiMPs), are used. The rate performance is improved after laser scribing: SiNP/LSG retains 827.6 mAh g-1 at 2.0 A gSi+C -1 , while SiNP/GO (before laser scribing) retains only 463.8 mAh g-1 . This can be attributed to the fast ion transport within the well-exfoliated 3D graphene network formed by laser scribing. The cyclability is also improved: SiNP/LSG retains 88.3% capacity after 100 cycles at 2.0 A gSi+C -1 , while SiNP/GO retains only 57.0%. The same trend is found for SiMPs: the SiMP/LSG shows better rate and cycling performance than SiMP/GO composites.

Understanding the Degradation Mechanisms of Conducting Polymer Supercapacitors.

Conducting polymers like polyaniline (PANI) are promising pseudocapacitive electrode materials, yet experience instability in cycling performance. Since polymers often degrade into oligomers, short chain length anilines have been developed to improve the cycling stability of PANI-based supercapacitors. However, the capacitance degradation mechanisms of aniline oligomer-based materials have not been systematically investigated and are little understood. Herein, two composite electrodes based on aniline trimers (AT) and carbon nanotubes (CNTs) are studied as model systems and evaluated at both pre-cycling and post-cycling states through physicochemical and electrochemical characterizations. The favorable effect of covalent bonding between AT and CNTs is confirmed to enhance cycling stability by preventing the detachment of aniline trimer and preserving the electrode microstructure throughout the charge/discharge cycling process. In addition, higher porosity has a positive effect on electron/ion transfer and the adaptation to volumetric changes, resulting in higher conductivity and extended cycle life. This work provides insights into the mechanism of enhanced cycling stability of aniline oligomers, indicating design features for aniline oligomer electrode materials to improve their electrochemical performance.

Labile Coordination Interphase for Regulating Lean Ion Dynamics in Reversible Zn Batteries.

Rechargeability in zinc (Zn) batteries is limited by anode irreversibility. The practical lean electrolytes exacerbate the issue, compromising the cost benefits of zinc batteries for large-scale energy storage. In this study, a zinc-coordinated interphase is developed to avoid chemical corrosion and stabilize zinc anodes. The interphase promotes Zn2+ ions to selectively bind with histidine and carboxylate ligands, creating a coordination environment with high affinity and fast diffusion due to thermodynamic stability and kinetic lability. Experiments and simulations indicate that interphase regulates dendrite-free electrodeposition and reduces side reactions. Implementing such labile coordination interphase results in increased cycling at 20 mA cm-2 and high reversibility of dendrite-free zinc plating/stripping for over 200 hours. A Zn||LiMn2 O4 cell with 74.7 mWh g-1 energy density and 99.7% Coulombic efficiency after 500 cycles realized enhanced reversibility using the labile coordination interphase. A lean-electrolyte full cell using only 10 µL mAh-1 electrolyte is also demonstrated with an elongated lifespan of 100 cycles, five times longer than bare Zn anodes. The cell offers a higher energy density than most existing aqueous batteries. This study presents a proof-of-concept design for low-electrolyte, high-energy-density batteries by modulating coordination interphases on Zn anodes.

A simple route to functionalized porous carbon foams from carbon nanodots for metal-free pseudocapacitors.

The development of potent pseudocapacitive charge storage materials has emerged as an effective solution for closing the gap between high-energy density batteries and high-power density and long-lasting electrical double-layer capacitors. Sulfonyl compounds are ideal candidates owing to their rapid and reversible redox reactions. However, structural instability and low electrical conductivity hinder their practical application as electrode materials. This work addresses these challenges using a fast and clean laser process to interconnect sulfonated carbon nanodots into functionalized porous carbon frameworks. In this bottom-up approach, the resulting laser-converted three-dimensional (3D) turbostratic carbon foams serve as high-surface-area, conductive scaffolds for redox-active sulfonyl groups. This design enables efficient faradaic processes using pendant sulfonyl groups, leading to a high specific capacitance of 157.6 F g-1 due to the fast reversible redox reactions of sulfonyl moieties. Even at 20 A g-1, the capacitance remained at 78.4% due to the uniform distribution of redox-active sites on the graphitic domains. Additionally, the 3D-tsSC300 electrode showed remarkable cycling stability of >15 000 cycles. The dominant capacitive processes and kinetics were analysed using extensive electrochemical characterizations. Furthermore, we successfully used 3D-tsSC300 in flexible solid-state supercapacitors, achieving a high specific capacitance of up to 17.4 mF cm-2 and retaining 91.6% of the initial capacitance after 20 000 cycles of charge and discharge coupled with 90° bending tests. Additionally, an as-assembled flexible all-solid-state symmetric supercapacitor exhibits a high energy density of 12.6 mW h cm-3 at a high power density of 766.2 W cm-3, both normalized by the volumes of the full device, which is comparable or better than state-of-the-art commercial pseudocapacitors and hybrid capacitors. The integrated supercapacitor provides a wide potential window of 2.0 V using a serial circuit, showing great promise for metal-free energy storage devices.

Sensitive dynamics of brain cognitive networks and its resource constraints.

It is well known that brain functions are closely related to the synchronization of brain networks, but the underlying mechanisms are still not completely understood. To study this problem, we here focus on the synchronization of cognitive networks, in contrast to that of a global brain network, as individual brain functions are in fact performed by different cognitive networks but not the global network. In detail, we consider four different levels of brain networks and two approaches, i.e., either with or without resource constraints. For the case of without resource constraints, we find that global brain networks have fundamentally different behaviors from that of the cognitive networks; i.e., the former has a continuous synchronization transition, while the latter shows a novel transition of oscillatory synchronization. This feature of oscillation comes from the sparse links among the communities of cognitive networks, resulting in coupling sensitive dynamics of brain cognitive networks. While for the case of resource constraints, we find that at the global level, the synchronization transition becomes explosive, in contrast to the continuous synchronization for the case of without resource constraints. At the level of cognitive networks, the transition also becomes explosive and the coupling sensitivity is significantly reduced, thus guaranteeing the robustness and fast switch of brain functions. Moreover, a brief theoretical analysis is provided.

AI-Guided Computing Insights into a Thermostat Monitoring Neonatal Intensive Care Unit (NICU).

In any healthcare setting, it is important to monitor and control airflow and ventilation with a thermostat. Computational fluid dynamics (CFD) simulations can be carried out to investigate the airflow and heat transfer taking place inside a neonatal intensive care unit (NICU). In this present study, the NICU is modeled based on the realistic dimensions of a single-patient room in compliance with the appropriate square footage allocated per incubator. The physics of flow in NICU is predicted based on the Navier-Stokes conservation equations for an incompressible flow, according to suitable thermophysical characteristics of the climate. The results show sensible flow structures and heat transfer as expected from any indoor climate with this configuration. Furthermore, machine learning (ML) in an artificial intelligence (AI) model has been adopted to take the important geometric parameter values as input from our CFD settings. The model provides accurate predictions of the thermal performance (i.e., temperature evaluation) associated with that design in real time. Besides the geometric parameters, there are three thermophysical variables of interest: the mass flow rate (i.e., inlet velocity), the heat flux of the radiator (i.e., heat source), and the temperature gradient caused by the convection. These thermophysical variables have significantly recovered the physics of convective flows and enhanced the heat transfer throughout the incubator. Importantly, the AI model is not only trained to improve the turbulence modeling but also to capture the large temperature gradient occurring between the infant and surrounding air. These physics-informed (Pi) computing insights make the AI model more general by reproducing the flow of fluid and heat transfer with high levels of numerical accuracy. It can be concluded that AI can aid in dealing with large datasets such as those produced in NICU, and in turn, ML can identify patterns in data and help with the sensor readings in health care.

Phase frustration induced remote synchronization.

Remote synchronization (RS) may take an important role in brain functioning and its study has attracted much attention in recent years. So far, most studies of RS are focused on the Stuart-Landau oscillators with mean-field coupling. However, realistic cases may have more complicated couplings and behaviors, such as the brain networks. To make the study of RS a substantial progress toward realistic situations, we here present a model of RS with phase frustration and show that RS can be induced for those systems where no RS exists when there is no phase frustration. By numerical simulations on both the Stuart-Landau and Kuramoto oscillators, we find that the optimal range of RS depends on the match of phase frustrations between the hub and leaf nodes and a fixed relationship of this match is figured out. While for the non-optimal range of RS, we find that RS exists only in a linear band between the phase frustrations of the hub and leaf nodes. A brief theoretical analysis is provided to explain these results.

Characterisation and Identification of Individual Intact Goat Muscle Samples (Capra sp.) Using a Portable Near-Infrared Spectrometer and Chemometrics.

Adulterated, poor-quality, and unsafe foods, including meat, are still major issues for both the food industry and consumers, which have driven efforts to find alternative technologies to detect these challenges. This study evaluated the use of a portable near-infrared (NIR) instrument, combined with chemometrics, to identify and classify individual-intact fresh goat muscle samples. Fresh goat carcasses (n = 35; 19 to 21.7 Kg LW) from different animals (age, breeds, sex) were used and separated into different commercial cuts. Thus, the longissimus thoracis et lumborum, biceps femoris, semimembranosus, semitendinosus, supraspinatus, and infraspinatus muscles were removed and scanned (900-1600 nm) using a portable NIR instrument. Differences in the NIR spectra of the muscles were observed at wavelengths of around 976 nm, 1180 nm, and 1430 nm, associated with water and fat content (e.g., intramuscular fat). The classification of individual muscle samples was achieved by linear discriminant analysis (LDA) with acceptable accuracies (68-94%) using the second-derivative NIR spectra. The results indicated that NIR spectroscopy could be used to identify individual goat muscles.

circBIRC6 contributes to the development of non-small cell lung cancer via regulating microRNA-217/amyloid beta precursor protein binding protein 2 axis.

BACKGROUND: Circular RNAs (circRNAs) are considered to be important regulators in cancer biology. In this study, we focused on the effect of circRNA baculoviral inhibitor of apoptosis protein (IAP) repeat containing 6 (circBIRC6) on non-small cell lung cancer (NSCLC) progression. METHODS: The NSCLC and adjacent non-tumor tissues were collected at Shanghai Ninth People's Hospital. Quantitative real-time polymerase chain reaction was conducted for assessing the levels of circBIRC6, amyloid beta precursor protein binding protein 2 (APPBP2) messenger RNA (mRNA), baculoviral IAP repeat containing 6 mRNA (BIRC6), and microRNA-217 (miR-217). Western blot assay was adopted for measuring the protein levels of APPBP2, E-cadherin, N-cadherin, and vimentin. Colony formation assay, transwell assay, and flow cytometry analysis were utilized for evaluating cell colony formation, metastasis, and apoptosis. Dualluciferase reporter assay and RNA immunoprecipitation assay were carried out to determine the interaction between miR-217 and circBIRC6 and APPBP2 in NSCLC tissues. The murine xenograft model assay was used to investigate the function of circBIRC6 in tumor formation in vivo. Differences were analyzed via Student's t test or one-way analysis of variance. Pearson's correlation coefficient analysis was used to analyze linear correlation. RESULTS: CircBIRC6 was overexpressed in NSCLC tissues and cells. Knockdown of circBIRC6 repressed the colony formation and metastasis and facilitated apoptosis of NSCLC cells in vitro and restrained tumorigenesis in vivo. Mechanically, circBIRC6 functioned as miR-217 sponge to promote APPBP2 expression in NSCLC cells. MiR-217 inhibition rescued circBIRC6 knockdown-mediated effects on NSCLC cell colony formation, metastasis, and apoptosis. Overexpression of miR-217 inhibited the malignant phenotypes of NSCLC cells, while the effects were abrogated by elevating APPBP2. CONCLUSIONS: CircBIRC6 aggravated NSCLC cell progression by elevating APPBP2 via sponging miR-217, which might provide a fresh perspective on NSCLC therapy.

Theoretical prediction on photoelectric and supramolecular properties of benzoquinone-tetrathiafulvalene macrocyclic molecules.

Benzoquinone has the ability to serve as an electron acceptor, and tetrathiafulvalene has the ability to serve as an electron donor. Based on the facts above, this work creatively cycles the benzoquinone unit and the tetrathiafulvalene unit alternately into macrocyclic molecules, the cyclopolymers of benzoquinone-tetrafluorene (C[n]QTTF, n = 3~6). To explore their structure and properties, the M06-2X functional of density functional theory (DFT) with 6-311g(d) basis set was used to optimize the ground-state structures of C[n]QTTF. Based on the stable configurations of the ground states, the electronic structure property is analyzed systematically. The results show that these macrocyclic molecules have excellent electron transport capability and electrochemical activity. Then, the electron absorption spectra of each system are carried out by using time-dependent density functional theory (TD-DFT) at the M062X/6-311+G(d) level. It turns out that their maximum absorption wavelengths are all in the visible range. Further calculation suggests that C[n]QTTF can also be characterized with one-dimensional self-assembly, double-walled assembly, and the host-guest inclusion performance, based on which it gains a variety of supramolecular structures. In summary, the benzoquinone-tetrafluorofurene macrocyclic molecules predicted by DFT calculations may be of assistance to the potential applications in organic electronics and supramolecular chemistry.

Comprehensive analysis of tumor microenvironment and identification of an immune signature to predict the prognosis and immunotherapeutic response in lung squamous cell carcinoma.

BACKGROUND: Tumor mutation burden (TMB) and immune microenvironment are important determinants of prognosis and immunotherapeutic efficacy for cancer patients. The aim of the present study was to develop an immune signature to effectively predict prognosis and immunotherapeutic response in patients with lung squamous cell carcinoma (LUSC). METHODS: TMB and immune microenvironment characteristics were comprehensively analyzed by multi-omics data in LUSC. The immune signature was further constructed and validated in multiple independent datasets by LASSO Cox regression analysis. Next, the value of immune signature in predicting the response of immunotherapy was evaluated. Finally, the possible mechanism of immune signature was also investigated. RESULTS: A novel immune signature based on 5 genes was constructed and validated to predict the prognosis of LUSC patients. These genes were filamin-C, Rho family GTPase 1, interleukin 4-induced gene-1, transglutaminase 2, and prostaglandin I2 synthase. High-risk patients had significantly poorer survival than low-risk patients. A nomogram was also developed based on the immune signature and tumor stage, which showed good application. Furthermore, we found that the immune signature had a significant correlation with immune checkpoint, microsatellite instability, tumor infiltrating lymphocytes, cytotoxic activity scores, and T-cell-inflamed score, suggesting low-risk patients are more likely to benefit from immunotherapy. Finally, functional enrichment and pathway analyses revealed several significantly enriched immune-related biological processes and metabolic pathways. CONCLUSIONS: In the present study, we developed a novel immune signature that could predict prognosis and immunotherapeutic response in LUSC patients. The results not only help identify LUSC patients with poor survival, but also increase our understanding of the immune microenvironment and immunotherapy in LUSC.

MicroRNA­92a promotes non­small cell lung cancer cell growth by targeting tumor suppressor gene FBXW7.

MicroRNA (miRNA/miR)­92a has been identified as being significantly downregulated in non­small cell lung cancer (NSCLC) tissues using a miRNA array. However, its biological function and molecular mechanisms in NSCLC have not been fully elucidated. The aim of the present study was to determine the role of miR­92a in NSCLC and the mechanisms by which it affects NSCLC cells. The expression levels of miR­92a in NSCLC tissues and cell lines were analyzed using reverse transcription­quantitative PCR. Cell viability and cell apoptosis were determined using an MTT assay and flow cytometry, respectively. It was observed that miR­92a was significantly upregulated in NSCLC tissues and cell lines. Inhibition of miR­92a significantly suppressed viability of NSCLC cells, with concomitant downregulation of key proliferative genes, such as proliferating cell nuclear antigen and Ki­67. miR­92a downregulation induced apoptosis of NSCLC cells, as evidenced by flow cytometry and apoptosis­related protein detection. Luciferase assays confirmed that miR­92a could directly bind to the 3'­untranslated region of tumor suppressor F­box/WD repeat­containing protein 7 (FBXW7) and suppress its translation. Furthermore, small interfering RNA­mediated FBXW7 inhibition partially attenuated the tumor suppressive effect of an miR­92a inhibitor on NSCLC cells. Collectively, these findings demonstrated that miR­92a might function as an oncogene in NSCLC by regulating FBXW7. In conclusion, miR­92a could serve as a potential therapeutic target in NSCLC treatment.

Kinetic Studies on Radical Scavenging Activity of Kaempferol Decreased by Sn(II) Binding.

Sn(II) binds to kaempferol (HKaem, 3,4',5,7-tetrahydroxy-2-(4-hydroxyphenyl)-4H-1-benzopyran-4-one) at the 3,4-site forming [Sn(II)(Kaem)2] complex in ethanol. DPPH• scavenging efficiency of HKaem is dramatically decreased by SnCl2 coordination due to formation of acid inhibiting deprotonation of HKaem as ligands and thus reduces the radical scavenging activity of the complex via a sequential proton-loss electron transfer (SPLET) mechanism. Moderate decreases in the radical scavenging of HKaem are observed by Sn(CH3COO)2 coordination and by contact between Sn and HKaem, in agreement with the increase in the oxidation potential of the complex compared to HKaem, leading to a decrease in antioxidant efficiency for fruits and vegetables with Sn as package materials.

Alkaline earth metal ion coordination increases the radical scavenging efficiency of kaempferol.

Flavonoids are used as natural additives and antioxidants in foods, and after coordination to metal ions, as drug candidates, depending on the flavonoid structure. The rate of radical scavenging of the ubiquitous plant flavonoid kaempferol (3,5,7,4'-tetrahydroxyflavone, Kaem) was found to be significantly enhanced by coordination of Mg(ii), Ca(ii), Sr(ii), and Ba(ii) ions, whereas the radical scavenging rate of apigenin (5,7,4'-trihydroxyflavone, Api) was almost unaffected by alkaline earth metal (AEM) ions, as studied for short-lived ß-carotene radical cations (ß-Car˙+) formed by laser flash photolysis in chloroform/ethanol (7 : 3) and for the semi-stable 2,2-diphenyl-1-picrylhydrazyl radical, DPPH˙, in ethanol at 25 °C. A 1 : 1 Mg(ii)-Kaem complex was found to be in equilibrium with a 1 : 2 Mg(ii)-Kaem2 complex, while for Ca(ii), Sr(ii) and Ba(ii), only 1 : 2 AEM(ii)-Kaem complexes were detected, where all complexes showed 3-hydroxyl and 4-carbonyl coordination and stability constants of higher than 109 L2 mol-2. The 1 : 2 Ca(ii)-Kaem2 complex had the highest second order rate constant for both ß-Car˙+ (5 × 108 L mol-1 s-1) and DPPH˙ radical (3 × 105 L mol-1 s-1) scavenging, which can be attributed to the optimal combination of the stronger electron withdrawing capability of the (n - 1)d orbital in the heavier AEM ions and their spatially asymmetrical structures in 1 : 2 AEM-Kaem complexes with metal ion coordination of the least steric hindrance of two perpendicular flavone backbones as ligands in the Ca(ii) complex, as shown by density functional theory calculations.

Copper(II) Coordination and Translocation in Luteolin and Effect on Radical Scavenging.

Luteolin differs as a radical scavenger dramatically from apigenin in response to Cu(II) coordination despite a minor structural difference. Coordination of Cu(II) increases the radical scavenging efficiency of luteolin, especially at low pH, while decreases the efficiency of apigenin at both low and higher pH as studied by ABTS•+ radical scavenging. Luteolin forms a 1:1 complex with Cu(II) binding to 4-carbonyl and 5-phenol for pH <6 and to 3',4'-catechol for pH >6. Apigenin forms a 1:2 complex independent of pH coordinated to 4-carbonyl and 5-hydroxylyl. Cu(II) coordinated to luteolin, as studied by pH jump stopped-flow, translocates with rate constants of 11.1 ± 0.3 s-1 from 4,5 to 3',4' sites and 1.0 ± 0.1 s-1 from 3',4' to 4,5 sites independent of Cu(II) concentration, pointing toward the dissociation of Cu(II) from an intermediate with two Cu(II) coordination as rate determining. 3',4'-Catechol is suggested to be a switch for Cu(II) translocation with deprotonation initiating 4,5 to 3',4' translocation and protonation initiating 3',4' to 4,5 translocation. For dicoordinated apigenin, the coordination symmetry balances an electron withdrawal effect of Cu(II) resulting in a decrease of phenol acidity and less radical scavenging efficiency compared to parent apigenin. Compared to that of parent luteolin, the radical scavenging rate of both 4,5 and 3',4' Cu(II)-coordinated luteolin is enhanced through increased phenol acidity by electron withdrawal by Cu(II), as confirmed by density functional theory (DFT) calculations. Coordination and translocation of Cu(II) accordingly increases the antioxidant activity of luteolin at pH approaching the physiological level and is discovered as a novel class of natural molecular machinery derived from plant polyphenols, which seems to be of importance for protection against oxidative stress.

Application of 460 nm visible light for the elimination of Candida albicans in vitro and in vivo.

The aim of the present study was to investigate the eradicating effects of 460 nm blue light (BL) on Candida albicans in vitro and in C. albicans­infected skin wounds in a mouse model. In the present study, the antifungal effects of irradiation with BL on C. albicans in vitro and in vivo were investigated. C. albicans colonies and cell numbers were investigated using the spread plate method and flow cytometry respectively following treatment with BL irradiation. In order to determine whether BL can eradicate C. albicans cells within biofilms, an in vitro C. albicans biofilm model was established, and the effect of BL was subsequently investigated using a confocal laser scanning microscope and a Live/Dead staining kit. Furthermore, a mouse skin wound infection model infected with C. albicans was established. Wound healing rates and histological examinations were determined 0, 3, 7, 10 and 14 days post­wounding. The results revealed that C. albicans was eradicated by BL in a dose­dependent manner, with a minimum fluence of 60 J/cm2. Irradiation with BL almost completely eradicated C. albicans when the light fluence was 240 J/cm2. C. albicans inside biofilms was also eradicated and biofilms were destroyed following BL irradiation at 240 J/cm2. In addition, BL was revealed to significantly suppress C. albicans infection in vivo. Irradiation with BL promoted the wound healing of C. albicans infected­skin wounds in a mouse model. In conclusion, the results of the present study demonstrated that 460 nm BL may eradicate planktonic and biofilm C. albicans in vitro, and represents a novel therapeutic strategy for the treatment of C. albicans infections in vivo.