RESUMEN
Calcium oxalate (CaOx) is known to grow on organic matrices and is often associated with the formation of kidney stones. Therefore, it is crucial to understand the nucleation and growth mechanisms. This study investigates the role of electrospun polycaprolactone (PCL)-loaded zarzaparrilla (ZP) (Herreria stellata) in the electrocrystallization (EC) of CaOx. Electrospinning (ES) was used to prepare PCL meshes with random (R) and aligned (A) fiber orientations. CaOx particles were grown directly on conductive tin indium oxide (ITO) glass modified with electrospun ZP-loaded PCL meshes by EC. The CaOx crystals after EC were measured by chronopotentiometry (CP), optical microscopy (OM), scanning electron microscopy (SEM), and X-ray diffraction (XRD), which showed that the ZP additive and PCL fiber orientations are key factors for CaOx nucleation.
RESUMEN
The conformational changes of poly(maleic anhydride-alt-styrene) (PSMA) modified with different amino acids (PSMA-Aa) were studied in an aqueous medium as a function of ionic strength and pH. The specific viscosity of PSMA-Aa decreased with increasing salt concentration due to a more compact conformation. There was a decrease in surface tension with increasing concentrations of the modified polyelectrolyte having a greater effect for the PSMA modified with l-phenylalanine at pH 7.0, demonstrating a greater surface-active character. The conformational changes were also confirmed by molecular dynamics studies, indicating that PSMA-Aa exhibits a compact structure at pH 4.0 and a more extended structure at pH 7.0. On the other hand, the conformational changes of PSMA-Aa were related to its biological response, where the higher surface-active character of the PSMA modified with l-phenylalanine correlates very well with the higher hemolytic activity observed in red blood cells, in which the surface-active capacity supports lytic potency in erythrocytes. The cytocompatibility assays indicated that there were no significant cytotoxic effects of the PSMA-Aa. Additionally, in solvent-accessible surface area studies, it was shown that the carboxylate groups of the PSMA modified with l-phenylalanine are more exposed to the solvent at pH 7.0 and high salt concentrations, which correlates with lower fluorescence intensity, reflecting a loss of mitochondrial membrane potential. It is concluded that the study of the conformational changes in PE modified with amino acids is essential for their use as biomaterials and relevant to understanding the possible effects of PE modified with amino acids in biological systems.
Asunto(s)
Aminoácidos , Anhídridos Maleicos , Humanos , Anhídridos Maleicos/química , Poliestirenos/química , Agua , Fenilalanina , Hemólisis , SolventesRESUMEN
The electrical properties of nanocomposites based on polyetherimide (PEI) filled with reduced graphene oxide (rGO) and a graphene oxide hybrid material obtained from graphene oxide grafted with poly(monomethyl itaconate) (PMMI) modified with barium titanate nanoparticles (BTN) getting (GO-g-PMMI/BTN) were studied. The results indicated that the nanocomposite filled with GO-g-PMMI/BTN had almost the same electrical conductivity as PEI (1 × 10-11 S/cm). However, the nanocomposite containing 10 wt.% rGO and 10 wt.% GO-g-PMMI/BTN as fillers showed an electrical conductivity in the order of 1 × 10-7 S/cm. This electrical conductivity is higher than that obtained for nanocomposites filled with 10% rGO (1 × 10-8 S/cm). The combination of rGO and GO-g-PMMI/BTN as filler materials generates a synergistic effect within the polymeric matrix of the nanocomposite favoring the increase in the electrical conductivity of the system.
RESUMEN
Crystallization occurs widely in living organisms where different organs could associate with the calcification process, such as the formation of calcium oxalate (CaOx) calculi in the urinary tract. However, the pathogenesis and the role of an inhibitor in the pathological processes involved in urolithiasis is poorly understood. Therefore, the use of phytic acid (PA) as an inhibitor for the organic fibrillar matrix is a novel approach to inhibit the formation of pathological CaOx crystals. Herein, electrospun polymer fiber meshes of polycaprolactone (PCL) with random (R) and aligned (A) fiber orientations containing PA were prepared by electrospinning, and their role as a 3D organic template in in vitro CaOx crystallization was investigated. CaOx crystals were generated on conductive tin indium oxide (ITO)-modified glass with R-PCL and A-PCL fibers in the presence of PA through an electrocrystallization (EC) procedure. This study provides a simple electrochemical approach to evaluate the role of PA as an inhibitor in the nucleation of pathological CaOx crystals. The resulting CaOx crystals were analyzed by chrono-potentiometry, optical microscopy (OM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). We found that PA and the fiber orientations are key factors in the nucleation and crystal growth of CaOx, achieving the stabilization of healthy CaOx crystal and the inhibition of the pathological crystal form.
RESUMEN
This work consists of studying the influence of two thermally reduced graphene oxides (TRGOs), containing oxygen levels of 15.8% and 8.9%, as fillers on the barrier properties of thermoplastic polyurethane (TPU) nanocomposites prepared by melt-mixing processes. The oxygen contents of the TRGOs were obtained by carrying out the thermal reduction of graphene oxide (GO) at 600 °C and 1000 °C, respectively. The presence and contents of oxygen in the TRGO samples were determined by XPS and their structural differences were determined by using X-ray diffraction analysis and Raman spectroscopy. In spite of the decrease of the elongation at break of the nanocomposites, the Young modulus was increased by up to 320% with the addition of TRGO. The barrier properties of the nanocomposites were enhanced as was evidenced by the decrease of the permeability to oxygen, which reached levels as low as -46.1%.
RESUMEN
Electrospun meshes (EM) composed of natural and synthetic polymers with randomly or aligned fibers orientations containing 0.5% or 1% of thermally reduced graphene oxide (TrGO) were prepared by electrospinning (ES), and their hyperthermia properties were evaluated. EM loaded with and without TrGO were irradiated using near infrared radiation (NIR) at 808 nm by varying the distance and electric potential recorded at 30 s. Morphological, spectroscopic, and thermal aspects of EM samples were analyzed by using SEM-EDS, Raman and X-ray photoelectron (XPS) spectroscopies, X-ray diffraction (XRD), and NIR radiation response. We found that the composite EM made of polyvinyl alcohol (PVA), natural rubber (NR), and arabic gum (AG) containing TrGO showed improved hyperthermia properties compared to EM without TrGO, reaching an average temperature range of 42-52 °C. We also found that the distribution of TrGO in the EM depends on the orientation of the fibers. These results allow infering that EM loaded with TrGO as a NIR-active thermal inducer could be an excellent candidate for hyperthermia applications in photothermal therapy.
RESUMEN
Poly(monomethyl itaconate) is outstanding because it is a glassy and dielectric polymer obtained from sustainable feedstock. Consequently, the study of the properties of its nanocomposites has gained importance. Herein, the electrical properties of nanocomposites based on poly(monomethyl itaconate) and functionalized few-layer graphene oxide (FGO) in the presence and absence of lithium ions (Li+) are studied. Not only did the electrical conductivities of the nanocomposites present values as high as 10-5 Scm-1, but also the dielectric permittivity of nanocomposites with (FGO) content lower than the percolation threshold was twice that of the pristine polymer, without presenting a drastic increase of the loss tangent. By contrast, nanocomposites containing Li+ ions presented significant increases of the permittivity with concomitant increases of the loss tangent. Moreover, it was determined that the presence of Li+ ions influenced the charge transport in the composites because of its ionic nature.
RESUMEN
Itaconic acid (IA) is an organic acid produced by the fermentation of sugars with aspergillus. It has been identified as one of the top 12 building-block chemicals. Here, we report the use of IA as a possible substitute to petroleum-based compatibilizers in polymer composite. We applied this study to thermoplastic elastomers based on styrene copolymers, since they are commonly used in blends and composites. Poly(styrene-b-ethylene-butylene-b-styrene) (SEBS) was grafted with 2.6 wt.% of itaconic acid (SEBS-g-IA) prepared by a reactive melt-mixing process, and was subsequently used to prepare composites filled with BaTiO3.). IA was successfully grafted as demonstrated by FTIR and XRD. SEBS-g-IA composites presented better mechanical properties, achieving an increase of Young modulus up to 80% compared with the neat polymer. This was ascribed to better dispersion and compatibility with the filler. Additionally, SEBS-g-IA showed increased dielectric permittivity, i.e., showed increased polarity, which indicates that it could potentially be used as a modifier for specialized polymers.
RESUMEN
Multiwalled carbon nanotubes (MWCNTs) are interesting high-tech nanomaterials. MWCNTs oxidized and functionalized with itaconic acid and monomethylitaconate were demonstrated to be efficient additives for controlling nucleation of calcium carbonate (CaCO3) via gas diffusion (GD) in classical as well as nonclassical crystallization, yielding aragonite and truncated calcite. For the first time, all amorphous calcium carbonate (ACC) proto-structures, such as proto calcite-ACC, proto vaterite-ACC and proto aragonite-ACC, were synthesized via prenucleation cluster (PNC) intermediates and stabilized at room temperature. The MWCNTs also showed concentration-dependent nucleation promotion and inhibition similar to biomolecules in nature. Incorporation of fluorescein-5-thiosemicarbazide (5-FTSC) dye-labeled MWCNTs into the CaCO3 lattice resulted in fluorescent hybrid nanosized CaCO3. We demonstrate that functionalized MWCNTs offer a good alternative for controlled selective crystallization and for understanding an inorganic mineralization process.
RESUMEN
The fluorination of two types of graphene oxides conducted by an easy and scalable deoxyfluorination reaction is reported. This reaction was carried out using diethylaminodifluorosulfinium tetrafluoroborate, a stable compound and an efficient reagent for replacing oxygenated functional groups of graphene oxide by fluoride. The graphene oxide produced by the Hummers' method (GOH) showed lower reactivity than that produced by the Brodie's method (GOB). X-ray photoelectron spectroscopy indicated that the highest fluorination degree achieved was 4.7â¯at.% when GOB was used, and the CF character corresponds to semi-ionic bonds. Additionally, a partial reduction of GO was concomitant with the functionalization reaction. The deoxyfluorination reaction changed the crystalline structure of GO, favoring the reconstruction of Csp2 structure of the graphene lattice and reducing the number of stacked layers. The fluorination led to the modification of the electronic band structure of this material, increasing the band gap from 2.05â¯eV for GOB to 3.88â¯eV for fluorinated GOB, while for GOH the low flurionation led to a slight increase of the band gap, from 3.48â¯eV to 3.57â¯eV.
RESUMEN
Thymol nanoemulsions were produced by spontaneous emulsification, ultrasound, and a combination of both methods. The best result in terms of size and polydispersion was spontaneous emulsification where thymol was efficiently encapsulated, the nanoemulsions inhibited Botrytis cinerea at 110â¯ppm of thymol. A 10% dilution of this nanoemulsion in water was used to prepare quinoa-chitosan films. The film microstructure was porous and heterogeneous. The tensile strength of the film was significantly lower but its mean elongation at break was similar to that of the control film. The water vapour permeability was similar to that of the control film. The effect of nanoemulsion-thymol-quinoa protein/chitosan coating on mould growth in inoculated cherry tomatoes was evaluated. Compared with control samples (tomatoes without coating and those coated with quinoa protein/chitosan), tomatoes with this coating and inoculated with B. cinerea showed a significant decrease in fungal growth after 7â¯days at 5⯰C.
Asunto(s)
Antifúngicos/farmacología , Chenopodium quinoa/química , Embalaje de Alimentos/métodos , Solanum lycopersicum/efectos de los fármacos , Timol/química , Antifúngicos/química , Botrytis/efectos de los fármacos , Quitosano/química , Emulsiones/química , Microbiología de Alimentos , Solanum lycopersicum/microbiología , Nanoestructuras/química , Permeabilidad , Proteínas de Plantas/química , Timol/farmacología , Agua/químicaRESUMEN
The numerous hydroxyl groups available in cyclodextrins are active sites that can form different types of linkages. They can be crosslinked with one another, or they can be derivatized to produce monomers that can form linear or branched networks. Moreover, they can form inclusion complexes with polymers and different substrates, modifying their physicochemical properties. This review shows the different applications using polymers with cyclodextrins, either by forming inclusion complexes, ternary complexes, networks, or molecularly imprinted polymers (MIPs). On one hand, the use of cyclodextrins enhances the properties of each polymer, and on the other the use of polymers decreases the amount of cyclodextrins required in different formulations. Both cyclodextrins and polymers contribute synergistically in several applications such as pharmacological, nutritional, environmental, and other industrial fields. The use of polymers based on cyclodextrins is a low cost easy to use potential tool with great future prospects.
Asunto(s)
Ciclodextrinas/química , Sistemas de Liberación de Medicamentos , Humanos , Impresión MolecularRESUMEN
Bionanocomposites based on ceramic nanoparticles and a biodegradable porous matrix represent a promising strategy for bone repair applications. The preparation and bioactive properties of bionanocomposites based on hydroxyapatite (nHA) and bioactive glass (nBG) nanoparticles were presented. nHA and nBG were synthesized with nanometric particle size using sol-gel/precipitation methods. Composite scaffolds were prepared by incorporating nHA and nBG into a porous alginate (ALG) matrix at different particle loads. The ability of the bionanocomposites to induce the crystallization of the apatite phase from simulated body fluid (SBF) was systematically evaluated using X-ray diffraction (XRD), scanning electron microscopy with energy dispersive X-ray analysis, and Fourier transform infrared spectroscopy. Both nHA/ALG and nBG/ALG composites were shown to notably accelerate the process of crystallization and growth of the apatite phase on the scaffold surfaces. For short immersion times in SBF, nBG (25%)-based nanocomposites induced a higher degree of apatite crystallization than nHA (25%)-based nanocomposites, probably due to the more reactive nature of the BG particles. Through a reinforcement effect, the nanoparticles also improve the mechanical properties and stability in SBF of the polymer scaffold matrix. In addition, in vitro biocompatibility tests demonstrated that osteoblast cells are viable and adhere well on the surface of the bionanocomposites. These results indicate that nHA- and nBG-based bionanocomposites present potential properties for bone repair applications, particularly oriented to accelerate the bone mineralization process.
Asunto(s)
Alginatos/farmacología , Sustitutos de Huesos/farmacología , Calcificación Fisiológica/efectos de los fármacos , Durapatita/farmacología , Vidrio , Nanocompuestos , Nanopartículas , Alginatos/química , Regeneración Ósea/efectos de los fármacos , Sustitutos de Huesos/química , Línea Celular Tumoral , Durapatita/química , Ácido Glucurónico/química , Ácido Glucurónico/farmacología , Ácidos Hexurónicos/química , Ácidos Hexurónicos/farmacología , Humanos , Ensayo de Materiales , Difracción de Rayos XRESUMEN
The effect of chitosan as internal or external coating on the mesalamine (5-ASA) release from calcium alginate microparticles (CaAl) was studied, and a delayed release of 5-ASA system intended for colonic drug delivery was developed. The external chitosan coating was developed by immersion of wetted CaAl in chitosan solution and the internal coating by mixing 5-ASA with chitosan solution and drying before the preparation of CaAl. Both systems were coated with Acryl-EZE® using combined fluid bed coating and immersion procedure. The results showed that in phosphate medium (pH 7.5), chitosan as 5-ASA coating promotes a quick erosion process accelerating drug release, but chitosan as external coating (CaAlCS) does not increase the T (50) value compared with the microparticles without chitosan (CaAl). Chitosan as internal or external coating was not effective to avoid the quick 5-ASA release in acidic medium (pH 1.2). The presence of ß-glucosidase enzymes increases significantly the 5-ASA release for CaAl, while no effect was observed with chitosan as internal or external coating. Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray data revealed that 5-ASA did not form a solid solution but was dispersed in the microparticles. The Acryl-EZE® coating of microparticles was effective because all the formulations showed a low release, less than 15%, of 5-ASA in acid medium at pH 1.2. Significant differences in the percentage of 5-ASA released between formulations were observed in phosphate buffer at pH 6.0. In phosphate buffer at pH 7.2, all the formulations released 100% of 5-ASA.
Asunto(s)
Alginatos/química , Ácidos Aminosalicílicos/química , Cápsulas , Materiales Biocompatibles Revestidos/química , Cistina/análogos & derivados , Preparaciones de Acción Retardada/química , Composición de Medicamentos/métodos , Implantes de Medicamentos/química , Ácidos Aminosalicílicos/administración & dosificación , Cistina/administración & dosificación , Cistina/química , Difusión , Ácido Glucurónico/química , Ácidos Hexurónicos/químicaRESUMEN
The aim of this work was to develop a procedure for encapsulation of diltiazem HCl by spray coagulation. Factors affecting the formulations such as the effect of NaCl on the solubility of diltiazem in alginate solution, surface tension, pH, viscosity of the coagulation medium, and the effect of drug load on drug release were studied. The drug load was increased substantially from 10 up to 320 mg/mL by adding 1.2% w/v NaCl in 1% w/v alginate solution. More stable microcapsules were obtained at pH 4.6 (acetate buffer) than at a pH 2.8 (lactic acid), and the microencapsulation process was favored by the type of chitosan that produced low turbidity and viscosity in the coagulation medium. A dose of 50 mg/mL of diltiazem HCl, 1.2% w/v NaCl, and chitosan CS allowed higher amount of drug to be encapsulated. The high water solubility of diltiazem HCl leads to fast release from the microcapsules.
Asunto(s)
Alginatos/química , Quitosano/química , Diltiazem/química , Composición de Medicamentos , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Concentración de Iones de Hidrógeno , Solubilidad , Espectroscopía Infrarroja por Transformada de Fourier , Tensión Superficial , ViscosidadRESUMEN
The aim of this work was to develop prolonged diltiazem hydrochloride release matrices based on alginate-gelatin mixtures and establish the drug release mechanism. The erosion, swelling, and dissolution behavior of the tablets in different medium were evaluated. The different polyelectrolyte behavior and gel strength between type A Gelatin and type B Gelatin would explain the different swelling, erosion and dissolution behavior in the media with sudden pH change. The similar dissolution behavior in the pH, which simulates the physiological pH through the gastrointestinal tract, should be explained because the same main species for gelatin A and Gelatin B would be present in this media.
Asunto(s)
Alginatos/química , Diltiazem/química , Gelatina/química , Química Farmacéutica , Preparaciones de Acción Retardada , Electrólitos , Hidrogeles , Concentración de Iones de Hidrógeno , Cinética , Solubilidad , Solventes/química , Comprimidos , Factores de TiempoRESUMEN
The biopolymer chitosan was chemically modified by grafting polyacrylamide or polyacrylic acid in a homogeneous aqueous phase using potassium persulfate (KPS) as redox initiator system in the presence of N,N-methylene-bis-acrylamide as a crosslinking agent. The influence of the grafted chitosan on calcium salts crystallization in vitro was studied using the sitting-drop method. By using polyacrylamide grafted chitosan as substrate, rosette-like CaSO4 crystals were observed. This was originated by the presence of sulfate coming from the initiator KPS. By comparing crystallization on pure chitosan and on grafted chitosan, a dramatic influence of the grafted polymer on the crystalline habit of both salts was observed. Substrates prepared by combining sulfate with chitosan or sulfate with polyacrylamide did not produce similar CaSO4 morphologies. Moreover, small spheres or donut-shaped CaCO3 crystals on polyacrylic acid grafted chitosan were generated. The particular morphology of CaCO3 crystals depends also on other synthetic parameters such as the molecular weight of the chitosan sample and the KPS concentration.
Asunto(s)
Resinas Acrílicas/química , Carbonato de Calcio/química , Quitosano/química , Cristalización , Microscopía Electrónica de Rastreo , Compuestos de Potasio/química , Sulfatos/químicaRESUMEN
The aim of this work was to evaluate the possibility of using mixtures and/or polyelectrolyte complexes from both chitosan-alginate and chitosan-carrageenan as prolonged drug release systems. Different dissolution profiles were obtained by changing the polymer matrix system (chitosan-alginate or chitosan-carrageenan) and the method used to include these polymers into the formulation (physical mixture or polyelectrolyte complex). Drug dissolution profiles from the matrices have been discussed by considering the swelling behavior of the polymers used. The swelling behavior of the chitosan-carrageenan and chitosan-alginate systems was analyzed by using the Hopfenberg model which permits to separate the diffusional contribution, kf, from the relaxational contribution, kr, involved in solvent penetration/sorption in glassy polymers. The chitosan-alginate system is better than the chitosan-carrageenan system as prolonged drug release matrix because the drug release is controlled at low percentage of the polymers in the formulation, the mean dissolution time is high, and different dissolution profiles could be obtained by changing the mode of inclusion of the polymers. Good agreement between td and kf/kr values for the system chitosan-alginate was found, which means that the swelling behavior of the polymers controlled the drug release from the matrix. In the case of the system chitosan-carrageenan, the high capacity of carrageenan promotes the entry of water into the tablet and therefore the main mechanism of drug release would be the disintegration instead of the swelling of the matrix.