Waveguide-integrated twisted bilayer graphene photodetectors.

Graphene photodetectors have exhibited high bandwidth and capability of being integrated with silicon photonics (SiPh), holding promise for future optical communication devices. However, they usually suffer from a low photoresponsivity due to weak optical absorption. In this work, we have implemented SiPh-integrated twisted bilayer graphene (tBLG) detectors and reported a responsivity of 0.65 A W-1 for telecom wavelength 1,550 nm. The high responsivity enables a 3-dB bandwidth of >65 GHz and a high data stream rate of 50 Gbit s-1. Such high responsivity is attributed to the enhanced optical absorption, which is facilitated by van Hove singularities in the band structure of high-mobility tBLG with 4.1o twist angle. The uniform performance of the fabricated photodetector arrays demonstrates a fascinating prospect of large-area tBLG as a material candidate for heterogeneous integration with SiPh.

Polyacrylonitrile as an Efficient Transfer Medium for Wafer-Scale Transfer of Graphene.

The disparity between growth substrates and application-specific substrates can be mediated by reliable graphene transfer, the lack of which currently strongly hinders the graphene applications. Conventionally, the removal of soft polymers, that support the graphene during the transfer, would contaminate graphene surface, produce cracks, and leave unprotected graphene surface sensitive to airborne contaminations. In this work, it is found that polyacrylonitrile (PAN) can function as polymer medium for transferring wafer-size graphene, and encapsulating layer to deliver high-performance graphene devices. Therefore, PAN, that is compatible with device fabrication, does not need to be removed for subsequent applications. The crack-free transfer of 4 in. graphene onto SiO2/Si wafers, and the wafer-scale fabrication of graphene-based field-effect transistor arrays with no observed clear doping, uniformly high carrier mobility (≈11 000 cm2 V-1 s-1), and long-term stability at room temperature, are achieved. This work presents new concept for designing the transfer process of 2D materials, in which multifunctional polymer can be retained, and offers a reliable method for fabricating wafer-scale devices of 2D materials with outstanding performance.

Enhanced Electrorheological Performance of Core-Shell-Structured Polymerized Ionic Liquid@Doubly Polymerized Ionic Liquid Microspheres Prepared via Evaporation-Assisted Dispersion Polymerization.

A polymerized ionic liquid (PIL) provides a platform for the development of a high-performance water-free polyelectrolyte-based electrorheological fluid (ERF) because of the presence of large-size hydrophobic ion pairs. However, the large-size hydrophobic ion pairs also easily result in a low glass-transition temperature of an ordinary linear PIL, and consequently, the PIL-based ERF has to be subject to a high leaking current density and a narrow working temperature range. In this paper, we prepared a kind of core-shell-structured polymerized ionic liquid@doubly polymerized ionic liquid (PIL@D-PIL) microsphere with a linear PIL as the core and a physically cross-linked D-PIL as the shell via an evaporation-assisted dispersion polymerization method. The core-shell structure of the sample was observed by scanning electron microscopy and transmission electron microscopy. The thermal properties of the sample were tested by differential scanning calorimetery and thermogravimetric analysis. The ER effect and dielectric polarization of PIL@D-PIL microspheres when dispersed in an insulating nonpolar liquid were studied by a rheometer and dielectric spectroscopy. It shows that the glass-transition temperature and thermal stability of a PIL increased after coating with the D-PIL shell. Under electric fields, the ERF of the PIL@D-PIL microspheres exhibits a significantly reduced leaking current density and an enhanced operating temperature range compared to the ERF of single-PIL microspheres. The PIL@D-PIL microspheres can still maintain good ER effect even if the temperature is higher than the glass-transition point of the PIL core due to the protection of the D-PIL shell.

High Moisture-Barrier Performance of Double-Layer Graphene Enabled by Conformal and Clean Transfer.

Graphene films that can theoretically block almost all molecules have emerged as promising candidate materials for moisture barrier films in the applications of organic photonic devices and gas storage. However, the current barrier performance of graphene films does not reach the ideal value. Here, we reveal that the interlayer distance of the large-area stacked multilayer graphene is the key factor that suppresses water permeation. We show that by minimizing the gap between the two monolayers, the water vapor transmission rate of double-layer graphene can be as low as 5 × 10-3 g/(m2 d) over an A4-sized region. The high barrier performance was achieved by the absence of interfacial contamination and conformal contact between graphene layers during layer-by-layer transfer. Our work reveals the moisture permeation mechanism through graphene layers, and with this approach, we can tailor the interlayer coupling of manually stacked two-dimensional materials for new physics and applications.

Fast synthesis of large-area bilayer graphene film on Cu.

Bilayer graphene (BLG) is intriguing for its unique properties and potential applications in electronics, photonics, and mechanics. However, the chemical vapor deposition synthesis of large-area high-quality bilayer graphene on Cu is suffering from a low growth rate and limited bilayer coverage. Herein, we demonstrate the fast synthesis of meter-sized bilayer graphene film on commercial polycrystalline Cu foils by introducing trace CO2 during high-temperature growth. Continuous bilayer graphene with a high ratio of AB-stacking structure can be obtained within 20 min, which exhibits enhanced mechanical strength, uniform transmittance, and low sheet resistance in large area. Moreover, 96 and 100% AB-stacking structures were achieved in bilayer graphene grown on single-crystal Cu(111) foil and ultraflat single-crystal Cu(111)/sapphire substrates, respectively. The AB-stacking bilayer graphene exhibits tunable bandgap and performs well in photodetection. This work provides important insights into the growth mechanism and the mass production of large-area high-quality BLG on Cu.

Single-crystalline van der Waals layered dielectric with high dielectric constant.

The scaling of silicon-based transistors at sub-ten-nanometre technology nodes faces challenges such as interface imperfection and gate current leakage for an ultrathin silicon channel1,2. For next-generation nanoelectronics, high-mobility two-dimensional (2D) layered semiconductors with an atomic thickness and dangling-bond-free surfaces are expected as channel materials to achieve smaller channel sizes, less interfacial scattering and more efficient gate-field penetration1,2. However, further progress towards 2D electronics is hindered by factors such as the lack of a high dielectric constant (κ) dielectric with an atomically flat and dangling-bond-free surface3,4. Here, we report a facile synthesis of a single-crystalline high-κ (κ of roughly 16.5) van der Waals layered dielectric Bi2SeO5. The centimetre-scale single crystal of Bi2SeO5 can be efficiently exfoliated to an atomically flat nanosheet as large as 250 × 200 µm2 and as thin as monolayer. With these Bi2SeO5 nanosheets as dielectric and encapsulation layers, 2D materials such as Bi2O2Se, MoS2 and graphene show improved electronic performances. For example, in 2D Bi2O2Se, the quantum Hall effect is observed and the carrier mobility reaches 470,000 cm2 V-1 s-1 at 1.8 K. Our finding expands the realm of dielectric and opens up a new possibility for lowering the gate voltage and power consumption in 2D electronics and integrated circuits.

Enhanced Electrorheological Polishing Efficiency of Alumina-Doped Titanium Dioxide Particles.

Electrorheological (ER) polishing is a novel polishing technology having flexible and tunable characteristics. At present, ER polishing uses ER particles to drive abrasive particles to polish the material surface. Under the action of high-speed centrifugation, the abrasive particles are easily separated from ER particles due to their significantly different ER effect, and this can easily cause the degradation of polishing ability. In this work, alumina-doped titanium dioxide ER polishing particles were developed via a sol-gel method. As a classical abrasive, alumina has higher hardness and can improve the ER effect of titanium dioxide by doping. Thus, alumina-doped titanium dioxide particles simultaneously possess high ER effect and high hardness. No phase separation appears in the polishing process and the result shows that alumina-doped titanium dioxide has a good polishing efficiency for materials with Mohs hardness of 3 and below.

Electrorheological Effect of Suspensions of Polyaniline Nanoparticles with Different Morphologies.

Polyaniline (PANI) nanospheres, nanofibers, and nanoplates were prepared using the oxidative polymerization method. Scanning electron microscopy (SEM) was used to observe the three morphologies of PANI, and their structure was tested using infrared spectroscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. The influence of particle morphology on the electrorheological (ER) effect was studied through rheological experiments and molecular dynamics (MD) simulation. The experimental and simulation results indicate that without applying an electric field, the nanofibers easily form a three-dimensional network structure in the suspension, resulting in yield stress. The three-dimensional network structure of the nanoplate suspension becomes weaker and the PANI nanosphere suspension lacks the ability to form a three-dimensional network structure. After applying an electric field, under the same condition, the yield stress and electric field-induced shear stress increment of PANI nanofibers are the highest, followed by nanoplates, and those of PANI nanospheres are the lowest. This indicates that the ER effect increases with the increase in particle morphology anisotropy. Through three-dimensional visual simulation analysis, it can be concluded that the enhanced ER effect associated with increased particle anisotropy can be attributed to improved stability in the ER chain structure.

Dual-Drug Nanosystem: Etoposide Prodrug and Cisplatin Coloaded Nanostructured Lipid Carriers for Lung Cancer Therapy.

Purpose: Cisplatin (CDDP) and etoposide (Etp) are recommended first-line therapy for lung cancer. Nanostructured lipid carriers (NLCs) are engineered to deliver drugs for lung cancer treatment. In the present study, NLCs were applied to coload an Etp prodrug (EtpP) and CDDP. Methods: The Etp prodrug was synthesized by linking the phenolic hydroxyl group of Etp with polyethylene glycol (PEG). EtpP and CDDP coencapsulated NLCs (EtpP-CDDP NLCs) were prepared using film ultrasound. Cytotoxicity of drugs and drug-containing NLCs was assessed by evaluating cell viability using MTT assays. In vivo antitumor efficiency of EtpP-CDDP NLCs was evaluated on lung cancer-bearing xenografts. Results: EtpP-CDDP NLCs showed a uniformly spherical morphology with a size of 176.8±4.9 nm and -potential of -31.9±3.2 mV. Cellular uptake efficiency of EtpP-CDDP NLCs was 57.4%±3.9% on A549/DDP cells. EtpP-CDDP NLCs exhibited more sustained plasma retention, the highest drug distribution in tumors, and the highest tumor-inhibition rates in lung tumor-bearing mice. Conclusion: EtpP-CDDP NLCs improved tumor-cell uptake, cytotoxicity, and tumor-inhibition efficiency, and could be used as a promising drug-delivery system for lung cancer combination therapy.

Increased Lipids in Chlamydomonas reinhardtii by Multiple Regulations of DOF, LACS2, and CIS1.

Microalgal lipids are essential for biofuel and dietary supplement production. Lipid engineering for higher production has been studied for years. However, due to the complexity of lipid metabolism, single-gene engineering gradually encounters bottlenecks. Multiple gene regulation is more beneficial to boosting lipid accumulation and further clarifying the complex regulatory mechanism of lipid biosynthesis in the homeostasis of lipids, carbohydrates, and protein metabolism. Here, three lipid-related genes, DOF, LACS2, and CIS, were co-regulated in Chlamydomonas reinhartii by two circles of transformation to overexpress DOF and knock down LACS2 and CIS simultaneously. With the multiple regulations of these genes, the intracellular lipids and FA content increased by 142% and 52%, respectively, compared with CC849, whereas the starch and protein contents decreased by 45% and 24%. Transcriptomic analysis showed that genes in TAG and FA biosynthesis were up-regulated, and genes in starch and protein metabolism were down-regulated. This revealed that more carbon precursor fluxes from starch and protein metabolism were redirected towards lipid synthesis pathways. These results showed that regulating genes in various metabolisms contributed to carbon flux redirection and significantly improved intracellular lipids, demonstrating the potential of multiple gene regulation strategies and providing possible candidates for lipid overproduction in microalgae.

Integrated wafer-scale ultra-flat graphene by gradient surface energy modulation.

The integration of large-scale two-dimensional (2D) materials onto semiconductor wafers is highly desirable for advanced electronic devices, but challenges such as transfer-related crack, contamination, wrinkle and doping remain. Here, we developed a generic method by gradient surface energy modulation, leading to a reliable adhesion and release of graphene onto target wafers. The as-obtained wafer-scale graphene exhibited a damage-free, clean, and ultra-flat surface with negligible doping, resulting in uniform sheet resistance with only ~6% deviation. The as-transferred graphene on SiO2/Si exhibited high carrier mobility reaching up ~10,000 cm2 V-1 s-1, with quantum Hall effect (QHE) observed at room temperature. Fractional quantum Hall effect (FQHE) appeared at 1.7 K after encapsulation by h-BN, yielding ultra-high mobility of ~280,000 cm2 V-1 s-1. Integrated wafer-scale graphene thermal emitters exhibited significant broadband emission in near-infrared (NIR) spectrum. Overall, the proposed methodology is promising for future integration of wafer-scale 2D materials in advanced electronics and optoelectronics.

Mesoscopic sliding ferroelectricity enabled photovoltaic random access memory for material-level artificial vision system.

Intelligent materials with adaptive response to external stimulation lay foundation to integrate functional systems at the material level. Here, with experimental observation and numerical simulation, we report a delicate nano-electro-mechanical-opto-system naturally embedded in individual multiwall tungsten disulfide nanotubes, which generates a distinct form of in-plane van der Waals sliding ferroelectricity from the unique combination of superlubricity and piezoelectricity. The sliding ferroelectricity enables programmable photovoltaic effect using the multiwall tungsten disulfide nanotube as photovoltaic random-access memory. A complete "four-in-one" artificial vision system that synchronously achieves full functions of detecting, processing, memorizing, and powering is integrated into the nanotube devices. Both labeled supervised learning and unlabeled reinforcement learning algorithms are executable in the artificial vision system to achieve self-driven image recognition. This work provides a distinct strategy to create ferroelectricity in van der Waals materials, and demonstrates how intelligent materials can push electronic system integration at the material level.

Enhancing the quantum yield of singlet oxygen: photocatalytic degradation of mustard gas simulant 2-chloroethyl ethyl sulfide catalyzed by a hybrid of polyhydroxyl aluminum cations and porphyrin anions.

By combining the anionic salt meso-tetra(4-carboxyphenyl)porphyrin (TCPP4-) and the Keggin polyoxometalate cation cluster [Al13O4(OH)24(H2O)12]7+ via a simple ion-exchange method, a hybrid (C48H26N4O8)[Al13O4(OH)24(H2O)12]2(OH)10·18H2O (Al13-TCPP) was prepared and thoroughly characterized as a prototype of polyoxometalate-porphyrin hybrids for the photocatalytic degradation of the mustard gas simulant 2-chloroethyl ethyl sulfide (CEES). The experimental results showed that the catalytic degradation rate of CEES in the presence of Al13-TCPP reached 96.16 and 99.01% in 180 and 90 min in methanol and methanol-water solvent mixture (v/v = 1 : 1), respectively. The reaction followed first-order reaction kinetics, and the half-life and kinetic constant in methanol and solvent mixture were 39.8 min, -0.017 min-1 and 14.7 min, -0.047 min-1. Mechanism analysis indicated that under visible light irradiation in air, CEES was degraded through a combination of oxidation and alcoholysis/hydrolysis in methanol and the methanol-water solvent mixture. The superoxide radical (O2˙-) and singlet molecular oxygen (1O2) generated by Al13-TCPP selectively oxidized CEES into a non-toxic sulfoxide. The singlet oxygen capture experiments showed that Al13-TCPP (Φ = 0.236) had a higher quantum yield of singlet oxygen generation than H4TCPP (Φ = 0.135) under visible light irradiation in air. The material Al13-TCPP has good reusability, and the degradation rate of CEES can still reach 98.37% after being recycled five times.

Large-area transfer of two-dimensional materials free of cracks, contamination and wrinkles via controllable conformal contact.

The availability of graphene and other two-dimensional (2D) materials on a wide range of substrates forms the basis for large-area applications, such as graphene integration with silicon-based technologies, which requires graphene on silicon with outperforming carrier mobilities. However, 2D materials were only produced on limited archetypal substrates by chemical vapor deposition approaches. Reliable after-growth transfer techniques, that do not produce cracks, contamination, and wrinkles, are critical for layering 2D materials onto arbitrary substrates. Here we show that, by incorporating oxhydryl groups-containing volatile molecules, the supporting films can be deformed under heat to achieve a controllable conformal contact, enabling the large-area transfer of 2D films without cracks, contamination, and wrinkles. The resulting conformity with enhanced adhesion facilitates the direct delamination of supporting films from graphene, providing ultraclean surfaces and carrier mobilities up to 1,420,000 cm2 V-1 s-1 at 4 K.

Linearity of a silicon-based graphene electro-absorption modulator.

A silicon-based graphene modulator, holding the advantages of high modulation efficiency, high speed, and being ultra-compact, is regarded as a promising candidate for next-generation communication networks. Although the properties involved for optical communications have been widely studied, very few works evaluate the performance required for the microwave scenarios. Here, for the first time, to the best of our knowledge, the linearity of silicon-based graphene electro-absorption modulator (EAM) is analyzed and experimentally characterized through spurious free dynamic range (SFDR) with 82.5 dB·Hz1/2 and 100.3 dB·Hz2/3. Further calculations reveal that a higher SFDR value could be achieved through optimizing the bias voltage. Variations of capacitor structural parameters have little influence on the linearity. Such performance leads to the first, to the best of our knowledge, demonstration of a Gbps-level pulse-amplitude 4-level modulation scheme (PAM-4) eye diagram in a silicon-based graphene modulator.

Progress in Preparation of Sea Urchin-like Micro-/Nanoparticles.

Urchin-like microparticles/nanoparticles assembled from radial nanorods have a good appearance and high specific surface area, providing more exposed active sites and shortening the diffusion path of photoexcited carriers from the interior to the surface. The interfacial interaction and physical and chemical properties of the materials can be improved by the interfacial porous network induced by interlacing nano-branches. In addition, multiple reflections of the layered microstructure can absorb more incident light and improve the photocatalytic performance. Therefore, the synthesis and functionalization of three-dimensional urchin-like nanostructures with controllable size, shape, and hierarchy have attracted extensive attention. This review aims to provide an overview to summarize the structures, mechanism, and application of urchin-like microparticles/nanoparticles derived from diverse synthesis methods and decoration types. Firstly, the synthesis methods of solid urchin-like micro-/nanoparticles are listed, with emphasis on the hydrothermal/solvothermal method and the reaction mechanism of several typical examples. Subsequently, the preparation method of composite urchin-like micro-/nanoparticles is described from the perspective of coating and doping. Then, the research progress of urchin-like hollow microspheres is reviewed from the perspective of the step-by-step method and synchronous method, and the formation mechanism of forming urchin-like hollow microspheres is discussed. Finally, the application progress of sea urchin-like particles in the fields of photocatalysis, electrochemistry, electromagnetic wave absorption, electrorheological, and gas sensors is summarized.

Tunable and giant valley-selective Hall effect in gapped bilayer graphene.

Berry curvature is analogous to magnetic field but in momentum space and is commonly present in materials with nontrivial quantum geometry. It endows Bloch electrons with transverse anomalous velocities to produce Hall-like currents even in the absence of a magnetic field. We report the direct observation of in situ tunable valley-selective Hall effect (VSHE), where inversion symmetry, and thus the geometric phase of electrons, is controllable by an out-of-plane electric field. We use high-quality bilayer graphene with an intrinsic and tunable bandgap, illuminated by circularly polarized midinfrared light, and confirm that the observed Hall voltage arises from an optically induced valley population. Compared with molybdenum disulfide (MoS2), we find orders of magnitude larger VSHE, attributed to the inverse scaling of the Berry curvature with bandgap. By monitoring the valley-selective Hall conductivity, we study the Berry curvature's evolution with bandgap. This in situ manipulation of VSHE paves the way for topological and quantum geometric optoelectronic devices, such as more robust switches and detectors.

High-Performance 3D Vertically Oriented Graphene Photodetector Using a Floating Indium Tin Oxide Channel.

Vertically oriented graphene (VG), owing to its sharp edges, non-stacking morphology, and high surface-to-volume ratio structure, is promising as a consummate material for the application of photoelectric detection. However, owing to high defect and fast photocarrier recombination, VG-absorption-based detectors inherently suffer from poor responsivity, severely limiting their viability for light detection. Herein, we report a high-performance photodetector based on a VG/indium tin oxide (ITO) composite structure, where the VG layer serves as the light absorption layer while ITO works as the carrier conduction channel, thus achieving the broadband and high response nature of a photodetector. Under the illumination of infrared light, photoinduced carriers generated in VG could transfer to the floating ITO layer, which makes them separate and diffuse to electrodes quickly, finally realizing large photocurrent detectivity. This kind of composite structure photodetector possesses a room temperature photoresponsivity as high as ~0.7 A/W at a wavelength of 980 nm, and it still maintains an acceptable performance at temperatures as low as 87 K. In addition, a response time of 5.8 s is observed, ~10 s faster than VG photodetectors. Owing to the unique three-dimensional morphology structure of the as-prepared VG, the photoresponsivity of the VG/ITO composite photodetector also presented selectivity of incidence angles. These findings demonstrate that our novel composite structure VG device is attractive and promising in highly sensitive, fast, and broadband photodetection technology.

Electrorheological Fluids of GO/Graphene-Based Nanoplates.

Due to their unique anisotropic morphology and properties, graphene-based materials have received extensive attention in the field of smart materials. Recent studies show that graphene-based materials have potential application as a dispersed phase to develop high-performance electrorheological (ER) fluids, a kind of smart suspension whose viscosity and viscoelastic properties can be adjusted by external electric fields. However, pure graphene is not suitable for use as the dispersed phase of ER fluids due to the electric short circuit caused by its high electrical conductivity under electric fields. However, graphene oxide (GO) and graphene-based composites are suitable for use as the dispersed phase of ER fluids and show significantly enhanced property. In this review, we look critically at the latest developments of ER fluids based on GO and graphene-based composites, including their preparation, electrically tunable ER property, and dispersed stability. The mechanism behind enhanced ER property is discussed according to dielectric spectrum analysis. Finally, we also propose the remaining challenges and possible developments for the future outlook in this field.

Inorganic Reinforced Poly(ionic liquid) Microcapsules: Confined Cooling-Assisted Phase Separation Self-Assembly and Enhanced Electroresponsive Properties.

A simple preparation of inorganic reinforced poly(ionic liquid) (PIL) microcapsules by combining dispersion polymerization and confined cooling-assisted phase separation self-assembly is reported. Silane coupling agent-modified PIL microbeads are first prepared by dispersion polymerization. Then, the microbeads are dissolved in a theta solvent composed of good solvent and non-solvent to form hollow SiOx microcapsules at a relatively high temperature. Finally, the solution is cooled to induce the nucleation and growth of dissolved PIL chains on the inner and outer surface of hollow SiOx microcapsules to form inorganic reinforced microcapsules with asymmetric PIL/SiOx /PIL sandwich-like shell. The morphology of microcapsules can be controlled by adjusting PIL concentration and cooling rate. The inorganic reinforced microcapsules show enhanced suspended stability and electroresponsive characteristic when used as the dispersed phase of smart suspensions.