Brain network functional connectivity changes in long illness duration chronic schizophrenia.

Introduction: Chronic schizophrenia has a course of 5 years or more and has a widespread abnormalities in brain functional connectivity. This study aimed to find characteristic functional and structural changes in a long illness duration chronic schizophrenia (10 years or more). Methods: Thirty-six patients with a long illness duration chronic schizophrenia and 38 healthy controls were analyzed by independent component analysis of brain network functional connectivity. Correlation analysis with clinical duration was performed on six resting state networks: auditory network, default mode network, dorsal attention network, fronto-parietal network, somatomotor network, and visual network. Results: The differences in the resting state network between the two groups revealed that patients exhibited enhanced inter-network connections between default mode network and multiple brain networks, while the inter-network connections between somatomotor network, default mode network and visual network were reduced. In patients, functional connectivity of Cuneus_L was negatively correlated with illness duration. Furthermore, receiver operating characteristic curve of functional connectivity showed that changes in Thalamus_L, Rectus_L, Frontal_Mid_R, and Cerebelum_9_L may indicate a longer illness duration chronic schizophrenia. Discussion: In our study, we also confirmed that the course of disease is significantly associated with specific brain regions, and the changes in specific brain regions may indicate that chronic schizophrenia has a course of 10 years or more.

Clinical value of contrast-enhanced ultrasound versus conventional ultrasound in biopsy of focal liver lesions.

BACKGROUND: Focal liver lesions (FLLs) are a common form of liver disease, and identifying accurate pathological types is required to guide treatment and evaluate prognosis. PURPOSE: To compare and analyze the application effect of contrast-enhanced ultrasound (CEUS) and conventional ultrasound (US) in the clinical diagnosis of focal liver lesions. MATERIAL AND METHODS: A retrospective analysis was performed on 682 patients with space-occupying liver lesions admitted to our hospital between December 2015 and August 2021. Of these, 280 underwent CEUS-guided biopsies and 402 underwent conventional US biopsies, with the results of each biopsy subsequently compared between the two groups. The success rate and accuracy of the biopsies and their relationship with different pathological features were also analyzed. RESULTS: The success rate, sensitivity, diagnostic accuracy, positive predictive value, and negative predictive value of the CEUS group were significantly higher than those of the US group (P < 0.05). Lesion size accuracy in the CEUS group was significantly higher than that in the US group (89.29% vs. 40.55%; P < 0.05). Lesion type accuracy in the CEUS group was significantly higher than that in the US group (86.49% vs. 43.59%), and the difference between the two groups was statistically significant (P < 0.05). The logistic regression analysis indicated that malignant lesions, lesions ≥5 cm, and lesions ≤1 cm were independent factors affecting the success rate of the puncture procedure (P < 0.05). CONCLUSION: The sensitivity, specificity, and diagnostic accuracy of lesion size and type in the CEUS group were higher than those in the US group.

Multimechanism biological profiling of tetrahydro-ß-carboline analogues as selective HDAC6 inhibitors for the treatment of Alzheimer's disease.

With the intensive research on the pathogenesis of Alzheimer's disease (AD), inhibition of HDAC6 appears to be a potential therapeutic approach for AD. In this paper, a series of tetrahydro-ß-carboline derivatives with hydroxamic acid group were fast synthesized. Among all, the most potent 15 selectively inhibited HDAC6 with IC50 of 15.2 nM and markedly increased acetylated alpha-tubulin levels. In cellular assay, 15 showed excellent neurotrophic effect by increasing the expression of GAP43 and Beta-3 tubulin markers. Besides, 15 showed neuroprotective effects in PC12 or SH-SY5Y cells against H2O2 and 6-OHDA injury through activation of Nrf2, catalase and Prx II, and significantly reduced H2O2-induced reactive oxygen species (ROS) production. In vivo, 15 significantly attenuated zebrafish anxiety-like behaviour and memory deficits in a SCOP-induced zebrafish model of AD. To sum up, multifunctional 15 might be a good lead to develop novel tetrahydrocarboline-based agents for the treatment of AD.

Multiphase Symbiotic Engineered Elastic Ceramic-Carbon Aerogels with Advanced Thermal Protection in Extreme Oxidative Environments.

Elastic aerogels can dissipate aerodynamic forces and thermal stresses by reversible slipping or deforming to avoid sudden failure caused by stress concentration, making them the most promising candidates for thermal protection in aerospace applications. However, existing elastic aerogels face difficulties achieving reliable protection above 1500 °C in aerobic environments due to their poor thermomechanical stability and significantly increased thermal conductivity at elevated temperatures. Here, a multiphase sequence and multiscale structural engineering strategy is proposed to synthesize mullite-carbon hybrid nanofibrous aerogels. The heterogeneous symbiotic effect between components simultaneously inhibits ceramic crystalline coarsening and carbon thermal etching, thus ensuring the thermal stability of the nanofiber building blocks. Efficient load transfer and high interfacial thermal resistance at crystalline-amorphous phase boundaries on the microscopic scale, coupled with mesoscale lamellar cellular and locally closed-pore structures, achieve rapid stress dissipation and thermal energy attenuation in aerogels. This robust thermal protection material system is compatible with ultralight density (30 mg cm-3), reversible compression strain of 60%, extraordinary thermomechanical stability (up to 1600 °C in oxidative environments), and ultralow thermal conductivity (50.58 mW m-1 K-1 at 300 °C), offering new options and possibilities to cope with the harsh operating environments faced by space exploration.

The influence of parents' education anxiety on children's learning anxiety: the mediating role of parenting style and the moderating effect of extracurricular tutoring.

Introduction: This study investigates the intricate relationship between parents' education anxiety and children's learning anxiety, examining the mediating role of parenting style and the moderating effect of extracurricular tutoring. Methods: Utilizing data from the "Survey of Parents and Students in Primary and Secondary Schools," the study employs stratified sampling (n = 3,298) and various psychological scales to measure education anxiety, parenting styles, and extracurricular tutoring. Results: This study reveals that parents' education anxiety significantly influences children's learning anxiety, with a notable positive correlation (r = 0.301**). Parenting styles particularly rejection and overprotection style increase this anxiety, while emotional warmth style decreases it. Academic tutoring serves as a moderator, reducing the impact of parental anxiety on children's learning anxiety (ß = -0.033, p < 0.05). Discussion: The study underscores the importance of addressing internal family dynamics to alleviate education anxiety. It advocates for a balanced approach to tutoring, emphasizing the benefits of arts and sports activities in reducing learning anxiety. Parents should be encouraged to adopt emotionally warm parenting styles and to engage their children in a variety of extracurricular activities.

Lung tumor discrimination by deep neural network model CanDo via DNA methylation in bronchial lavage.

Bronchoscopic-assisted discrimination of lung tumors presents challenges, especially in cases with contraindications or inaccessible lesions. Through meta-analysis and validation using the HumanMethylation450 database, this study identified methylation markers for molecular discrimination in lung tumors and designed a sequencing panel. DNA samples from 118 bronchial washing fluid (BWF) specimens underwent enrichment via multiplex PCR before targeted methylation sequencing. The Recursive Feature Elimination Cross-Validation and deep neural network algorithm established the CanDo classification model, which incorporated 11 methylation features (including 8 specific to the TBR1 gene), demonstrating a sensitivity of 98.6% and specificity of 97.8%. In contrast, bronchoscopic rapid on-site evaluation (bronchoscopic-ROSE) had lower sensitivity (87.7%) and specificity (80%). Further validation in 33 individuals confirmed CanDo's discriminatory potential, particularly in challenging cases for bronchoscopic-ROSE due to pathological complexity. CanDo serves as a valuable complement to bronchoscopy for the discriminatory diagnosis and stratified management of lung tumors utilizing BWF specimens.

Two-Dimensional Piezoelectric Nanofibrous Webs by Self-Polarized Assembly for High-Performance PM0.3 Filtration.

Particulate matter (PM) pollution has posed a serious threat to public health, especially the global spread of infectious diseases. Most existing air filtration materials are still subjected to a compromise between removal efficiency and air permeability on account of their stacking bulk structures. Here, we proposed a self-polarized assembly technique to create two-dimensional piezoelectric nanofibrous webs (PNWs) directly from polymer solutions. The strategy involves droplets deforming into ultrathin liquid films by inertial flow, liquid films evolving into web-like architectures by instantaneous phase inversion, and enhanced dipole alignment by cluster electrostatics. The assembled continuous webs exhibit integrated structural superiorities of nanoscale diameters (∼20 nm) of the internal fibers and through pores (∼100 nm). Combined with the wind-driven electrostatic property derived from the enhanced piezoelectricity, the PNW filter shows high efficiency (99.48%) and low air resistance (34 Pa) against PM0.3 as well as high transparency (84%), superlight weight (0.7 g m-2), and long-term stable service life. This creation of such versatile nanomaterials may offer insight into the design and upgrading of high-performance filters.

Lanthanide Inorganic Nanoparticles Enhance Semiconducting Polymer Nanoparticles Afterglow Luminescence for In Vivo Afterglow/Magnetic Resonance Imaging.

Dual/multimodal imaging strategies are increasingly recognized for their potential to provide comprehensive diagnostic insights in cancer imaging by harnessing complementary data. This study presents an innovative probe that capitalizes on the synergistic benefits of afterglow luminescence and magnetic resonance imaging (MRI), effectively eliminating autofluorescence interference and delivering a superior signal-to-noise ratio. Additionally, it facilitates deep tissue penetration and enables noninvasive imaging. Despite the advantages, only a limited number of probes have demonstrated the capability to simultaneously enhance afterglow luminescence and achieve high-resolution MRI and afterglow imaging. Herein, we introduce a cutting-edge imaging platform based on semiconducting polymer nanoparticles (PFODBT) integrated with NaYF4@NaGdF4 (Y@Gd@PFO-SPNs), which can directly amplify afterglow luminescence and generate MRI and afterglow signals in tumor tissues. The proposed mechanism involves lanthanide nanoparticles producing singlet oxygen (1O2) upon white light irradiation, which subsequently oxidizes PFODBT, thereby intensifying afterglow luminescence. This innovative platform paves the way for the development of high signal-to-background ratio imaging modalities, promising noninvasive diagnostics for cancer.

Efficacy and safety of bismuth quadruple regimens containing minocycline and vonoprazan for eradication of Helicobacter pylori: Real-world evidence.

Background and Aim: To evaluate the efficacy and safety of minocycline, vonoprazan, amoxicillin, and bismuth quadruple therapy for Helicobacter pylori (H. pylori) treatment. Methods: From August 2022 to May 2023, clinical data were collected from patients who received H. pylori eradication treatment at West China Fourth Hospital, Sichuan University. One group received the MVAB regimen (amoxicillin, minocycline, vonoprazan, and colloidal bismuth pectin), while another group received the FOAB regimen (amoxicillin, furazolidone, omeprazole, and colloidal bismuth pectin), both administered for 14 days. Follow-up assessments of safety and compliance were conducted within 1 week after treatment completion. One and a half months after treatment, the success of eradication was evaluated using the urea breath test. Results: For the MVAB regimen as a first-line treatment, the eradication rate was 90.1% (127/141, 95% CI: 85.1-95.1%) in the ITT analysis and 93.4% (127/136, 95% CI: 89.2-97.6%) in the PP analysis as a first-line treatment. As a second-line treatment, the eradication rate was 91.3% (21/23, 95% CI: 78.8-103.8%) in both analyses. For the FOAB regimen as a first-line treatment, the eradication rate was 98.0% (50/51, 95% CI: 94.1-101.2%) in the ITT analysis and 100% (50/50, 95% CI: 100%) in the PP analysis. As a second-line treatment, the eradication rate was 100% (6/6, 95% CI: 100%) in both analyses. Moreover, there was no significant difference in the incidence of adverse events between the two groups (MVAB regimen: 5.5% and FOAB regimen: 8.8%; P > 0.05). Conclusions: The MVAB regimen could indeed be a viable alternative treatment option to conventional therapies.

A highly selective and sensitive rhodamine B-based chemosensor for Sn4+ in water-bearing and biomaging and biosensing in zebrafish.

A novel colorimetric-fluorescent dual-mode chemosensor (JT5) based on rhodamine B has been produced for monitoring Sn4+ in the DMSO/H2O (4:1, v/v) medium. It has high sensitivity, a low detection limit, a short response time (1 s) and high stability, and can still be maintained after two weeks with the red dual fluorescence/ colorimetric response. Enhancement of red fluorescence (591 nm) and red colorimetric (567 nm) response of JT5 by Sn4+ addition. The electrostatic potential of the sensor JT5 molecule was simulated to speculate on the sensing mechanism, and the IR, mass spectrometry and 1H NMR titration were utilized to further demonstrate that JT5 was coordinated to Sn4+ with a 1:1 type, the rhodamine spironolactam ring of JT5 opens up to form a penta-membered ring with Sn4+, meanwhile, its system may have chelation enhanced fluorescence (CHEF) effect. In addition, theoretical calculations were carried out to give the energy gaps of JT5 and [JT5 + Sn4+] as well as to simulate the electronic properties of the maximal absorption peaks. Notably, the sensor JT5 was successfully applied to monitoring Sn4+ in zebrafish, and the JT5-loaded filter paper provided a solid-state platform for detecting Sn4+ by both naked eye and fluorescent methods. In summary, this work contributes to monitoring Sn4+ in organisms and solid-state materials and promotes understanding of Sn4+ functions in biological systems, environments, and solid-state materials.

Ratiometric emission of Tb(III)-functionalized Cd-based layered MOFs for portable visual detection of trace amounts of diquat in apples, potatoes and corn.

Diquat (DQ) is a typical bipyridine herbicide widely used to control weeds in fields and orchards. The severe toxicity of diquat poses a serious threat to the environment and human health. Metal-organic frameworks (MOFs) have received widespread attention due to their unique physical and chemical properties and applications in the detection of toxic and harmful substances. In this work, a two-dimensional (2D) Tb(III) functionalized MOF Tb(III)@1 (1 = [Cd(HTATB)(bimb)]n·H2O (Cd-MOF), H3TATB = 4,4',4″-triazine-2,4,6-tribenzoicacid, bimb = 1,4-bis((1H-imidazol-1-yl)methyl)benzene) has been prepared and characterized. Tb(III)@1 has excellent optical properties and high water and chemical stability. After the Tb(III) is fixed by the uncoordinated -COO- in the 1 framework, Tb(III)@1 emits the typical green fluorescence of the lanthanide ion Tb(III) through the "antenna effect". It is worth noting that Tb(III)@1 can be used as a dual emission fluorescence chemical sensor for the ratio fluorescence detection of pesticide DQ, exhibiting a relatively low detection limit of 0.06 nM and a wide detection range of 0-50 nM. After the addition of DQ, a rapid color change of Tb(III)@1 fluorescence from green to blue was observed due to the combined effects of IFE, FRET and dynamic quenching. Therefore, a simple test paper box has been designed for direct on-site determination of pesticide DQ. In addition, the developed sensor has been successfully applied to the detection of DQ in real samples (fruits a Yin-Xia Sun and Bo-Tao Ji contributed equally to this work and should be considered co-first authors.nd vegetables) with satisfactory results. The results indicate that the probe developed in this study has broad application prospects in both real sample detection and actual on-site testing.

Based on the prognosis model of immunogenes, the prognosis model was constructed to predict the invasion of immune genes and immune cells related to primary liver cancer and its experimental validation.

Background: Primary liver cancer (PLC) is a prevalent malignancy of the digestive system characterized by insidious symptom onset and a generally poor prognosis. Recent studies have highlighted a significant correlation between the initiation and prognosis of liver cancer and the immune function of PLC patients. Purpose: Revealing the expression of PLC-related immune genes and the characteristics of immune cell infiltration provides assistance for the analysis of clinical pathological parameters and prognosis of PLC patients. Methods: PLC-related differentially expressed genes (DEGs) with a median absolute deviation (MAD > 0.5) were identified from TCGA and GEO databases. These DEGs were intersected with immune-related genes (IRGs) from the ImmPort database to obtain PLC-related IRGs. The method of constructing a prognostic model through immune-related gene pairs (IRGPs) is used to obtain IRGPs and conduct the selection of central immune genes. The central immune genes obtained from the selection of IRGPs are validated in PLC. Subsequently, the relative proportions of 22 types of immune cells in different immune risk groups are evaluated, and the differential characteristics of PLC-related immune cells are verified through animal experiments. Results: Through database screening and the construction of an IRGP prognosis model, 84 pairs of IRGPs (P < 0.001) were ultimately obtained. Analysis of these 84 IRGPs revealed 11 central immune genes related to PLC, showing differential expression in liver cancer tissues compared to normal liver tissues. Results from the CiberSort platform indicate differential expression of immune cells such as naive B cells, macrophages, and neutrophils in different immune risk groups. Animal experiments demonstrated altered immune cell proportions in H22 tumor-bearing mice, validating findings from peripheral blood and spleen homogenate analyses. Conclusion: Our study successfully predicted and validated PLC-related IRGs and immune cells, suggesting their potential as prognostic indicators and therapeutic targets for PLC.

Prenatal ultrasound findings and clinical outcomes of uniparental disomy: a retrospective study.

BACKGROUND: Uniparental disomy is the inheritance of a homologous chromosome pair or part of homologous chromosomes from only one parent. However, the clinical significance of uniparental disomy and the difference among the prognosis of involvement of different chromosomes remain unclear. OBJECTIVE: To assess the associated prenatal ultrasound presentations and clinical outcomes of uniparental disomy on different chromosomes and to analyze the relationship between prenatal ultrasound markers and clinical outcomes. STUDY DESIGN: We retrospectively analyzed data from fetuses with uniparental disomy diagnosed using chromosome microarray analysis with the Affymetrix CytoScan HD array at our institution between January 2013 and September 2022. The relationship between prenatal ultrasound findings, the involved chromosome(s), and clinical outcomes was evaluated. RESULTS: During the study period, 36 fetuses with uniparental disomy were diagnosed, and two cases were excluded for non-available postnatal data. Finally, 34 fetuses were included in our study, of which 30 (88.2%) had uniparental disomy occurring on a single chromosome, while four (11.8%) were identified with uniparental disomy on different chromosomes. The most frequently involved chromosomes were chromosomes 16, X and 2, which presented in 8 (23.5%), 5 (14.7%) and 4 (11.8%), respectively. Prenatal ultrasound abnormalities were detected in 21 fetuses, with the most common category being multiple abnormalities (12 (57.1%)). Fetal growth restriction was identified in 14 (41.2%) fetuses, all of which coexisted with other abnormal findings. The rate of adverse perinatal outcomes in patients with uniparental disomy and fetal abnormalities was significantly higher than those without abnormalities (76.2% versus 15.4%, P = 0.002). The incidence of fetal or neonatal death was significantly higher in fetuses with fetal growth restriction than those without (85.7% versus 30.0%, P = 0.004). CONCLUSIONS: The prognosis of fetuses with uniparental disomy combined with fetal abnormalities, especially fetal growth restriction, was much poorer than those without.

Effects of processing methods on the aroma of Poria cocos and its changing regulations during processing.

Poria cocos is a natural source of fungal food raw materials. Processing method is a key effecting the aroma of Poria cocos. In this study, the aroma compounds of Poria cocos products processed using sweating-low-temperature drying (SW-LD), sweating-high-temperature drying (SW-HD), steaming-low-temperature drying (ST-LD), and steaming-high-temperature drying (ST-HD) were compared by headspace solid-phase microextraction (HS-SPME) combined with gas chromatography-mass spectrometry (GC-MS), and the changes in aroma compounds of Poria cocos products during processing were analyzed. GC-MS analysis showed SW-HD product had highest content of aroma compounds. Aroma activity value (OAV) analysis indicated that 9 aroma compounds contributed to the overall aroma of Poria cocos. Among 9 compounds of Poria cocos, 1-octen-3-ol, hexanal, nonanal, octanal, trans-2-octenal, and heptanal contributed to mushroom, refreshing, sweet and fatty characters. In addition, the aroma compound changes during the processing were analyzed, revealing that steaming and sweating were the key processes affecting the aroma of Poria cocos products. The findings of this study provide valuable theoretical guidance for the development of Poria cocos processing technology.

A Breathable Fibrous Membrane with Coaxially Heterogeneous Conductive Networks toward Personal Thermal Management and Electromagnetic Interference Shielding.

The expeditious growth of wearable electronic devices has boomed the development of versatile smart textiles for personal health-related applications. In practice, integrated high-performance systems still face challenges of compromised breathability, high cost, and complicated manufacturing processes. Herein, a breathable fibrous membrane with dual-driven heating and electromagnetic interference (EMI) shielding performance is developed through a facile process of electrospinning followed by targeted conformal deposition. The approach constructs a robust hierarchically coaxial heterostructure consisting of elastic polymers as supportive "core" and dual-conductive components of polypyrrole and copper sulfide (CuS) nanosheets as continuous "sheath" at the fiber level. The CuS nanosheets with metal-like electrical conductivity demonstrate the promising potential to substitute the expensive conductive nano-materials with a complex fabricating process. The as-prepared fibrous membrane exhibits high electrical conductivity (70.38 S cm-1), exceptional active heating effects, including solar heating (saturation temperature of 69.7 °C at 1 sun) and Joule heating (75.2 °C at 2.9 V), and impressive EMI shielding performance (50.11 dB in the X-band), coupled with favorable air permeability (161.4 mm s-1 at 200 Pa) and efficient water vapor transmittance (118.9 g m-2 h). This work opens up a new avenue to fabricate versatile wearable devices for personal thermal management and health protection.

Correlation between Combined Urinary Metal Exposure and Grip Strength under Three Statistical Models: A Cross-sectional Study in Rural Guangxi.

Objective: This study aimed to investigate the potential relationship between urinary metals copper (Cu), arsenic (As), strontium (Sr), barium (Ba), iron (Fe), lead (Pb) and manganese (Mn) and grip strength. Methods: We used linear regression models, quantile g-computation and Bayesian kernel machine regression (BKMR) to assess the relationship between metals and grip strength. Results: In the multimetal linear regression, Cu (ß = -2.119), As (ß = -1.318), Sr (ß = -2.480), Ba (ß = 0.781), Fe (ß = 1.130) and Mn (ß = -0.404) were significantly correlated with grip strength ( P < 0.05). The results of the quantile g-computation showed that the risk of occurrence of grip strength reduction was -1.007 (95% confidence interval: -1.362, -0.652; P < 0.001) when each quartile of the mixture of the seven metals was increased. Bayesian kernel function regression model analysis showed that mixtures of the seven metals had a negative overall effect on grip strength, with Cu, As and Sr being negatively associated with grip strength levels. In the total population, potential interactions were observed between As and Mn and between Cu and Mn ( P interactions of 0.003 and 0.018, respectively). Conclusion: In summary, this study suggests that combined exposure to metal mixtures is negatively associated with grip strength. Cu, Sr and As were negatively correlated with grip strength levels, and there were potential interactions between As and Mn and between Cu and Mn.

Identification and validation of serum metabolite biomarkers for endometrial cancer diagnosis.

Endometrial cancer (EC) stands as the most prevalent gynecological tumor in women worldwide. Notably, differentiation diagnosis of abnormity detected by ultrasound findings (e.g., thickened endometrium or mass in the uterine cavity) is essential and remains challenging in clinical practice. Herein, we identified a metabolic biomarker panel for differentiation diagnosis of EC using machine learning of high-performance serum metabolic fingerprints (SMFs) and validated the biological function. We first recorded the high-performance SMFs of 191 EC and 204 Non-EC subjects via particle-enhanced laser desorption/ionization mass spectrometry (PELDI-MS). Then, we achieved an area-under-the-curve (AUC) of 0.957-0.968 for EC diagnosis through machine learning of high-performance SMFs, outperforming the clinical biomarker of cancer antigen 125 (CA-125, AUC of 0.610-0.684, p < 0.05). Finally, we identified a metabolic biomarker panel of glutamine, glucose, and cholesterol linoleate with an AUC of 0.901-0.902 and validated the biological function in vitro. Therefore, our work would facilitate the development of novel diagnostic biomarkers for EC in clinics.

Sympathetic nerve-enteroendocrine L cell communication modulates GLP-1 release, brain glucose utilization, and cognitive function.

Glucose homeostasis is controlled by brain-gut communications. Yet our understanding of the neuron-gut interface in the glucoregulatory system remains incomplete. Here, we find that sympathetic nerves elevate postprandial blood glucose but restrict brain glucose utilization by repressing the release of glucagon-like peptide-1 (GLP-1) from enteroendocrine L cells. Sympathetic nerves are in close apposition with the L cells. Importantly, sympathetic denervation or intestinal deletion of the adrenergic receptor α2 (Adra2a) augments postprandial GLP-1 secretion, leading to reduced blood glucose levels and increased brain glucose uptake. Conversely, sympathetic activation shows the opposite effects. At the cellular level, adrenergic signaling suppresses calcium flux to limit GLP-1 secretion upon sugar ingestion. Consequently, abrogation of adrenergic signal results in a significant improvement in learning and memory ability. Together, our results reveal a sympathetic nerve-enteroendocrine unit in constraining GLP-1 secretion, thus providing a therapeutic nexus of mobilizing endogenous GLP-1 for glucose management and cognitive improvement.

Multiscale Interpenetrated/Interconnected Network Design Confers All-Carbon Aerogels with Unprecedented Thermomechanical Properties for Thermal Insulation under Extreme Environments.

With ultralight weight, low thermal conductivity, and extraordinary high-temperature resistance, carbon aerogels hold tremendous potential against severe thermal threats encountered by hypersonic vehicles during the in-orbit operation and re-entry process. However, current 3D aerogels are plagued by irreconcilable contradictions between adiabatic and mechanical performance due to monotonicity of the building blocks or uncontrollable assembly behavior. Herein, a spatially confined assembly strategy of multiscale low-dimensional nanocarbons is reported to decouple the stress and heat transfer. The nanofiber framework, a basis for transferring the loading strain, is covered by a continuous thin-film-like layer formed by the aggregation of nanoparticles, which in combination serve as the fundamental structural units for generating an elastic behavior while yielding compartments in aerogels to suppress the gaseous fluid thermal diffusion within distinct partitions. The resulting all-carbon aerogels with a hierarchical cellular structure and quasi-closed cell walls achieve the best thermomechanical and insulation trade-off, exhibiting flyweight density (24 mg cm-3 ), temperature-constant compressibility (-196-1600 °C), and a low thermal conductivity of 0.04 829 W m-1 K-1 at 300 °C. This strategy provides a remarkable thermal protection material in hostile environments for future aerospace exploration.

Direct synthesis of ultralight, elastic, high-temperature insulation N-doped TiO2 ceramic nanofibrous sponges via conjugate electrospinning.

The design of three-dimensional ceramic nanofibrous materials with high-temperature insulation and flame-retardant characteristics is of significant interest due to the effectively improved mechanical properties. However, achieving a pure ceramic monolith with ultra-low density, high elasticity and toughness remains a great challenge. Herein, a low-cost, scalable strategy to fabricate ultralight and mechanically robust N-doped TiO2 ceramic nanofibrous sponges with a continuous stratified structure by conjugate electrospinning is reported. Remarkably, the introduction of dopamine into the precursor nanofibers is engineered, which realizes the nitrogen doping to inhibit the TiO2 grain growth, endowing single nanofibers with a smoother, less defective surface. Besides, the self-polymerization process of dopamine allows the construction of bonding points between nanofibers and optimizes the distribution of inorganic micelles on polymer templates. Moreover, a rotating disk receiving device under different rotating speeds is designed to obtain N-doped TiO2 sponges with various interlamellar spacings, further affecting the maximum compressive deformation capacity. The resulting ceramic sponges, consisting of fluffy crosslinked nanofiber layers, possess low densities of 12-45 mg cm-3, which can quickly recover under a large strain of 80% and have only 9.2% plastic deformation after 100 compression cycles. In addition, the sponge also exhibits a temperature-invariant superelasticity at 25-800 °C and a low heat conductivity of 0.0285 W m-1 K-1, with an outstanding thermal insulation property, making it an ideal insulation material for high-temperature or harsh conditions.