Roux-en-Y Gastric Bypass Improves Insulin Sensitivity in Obese Rats with Type 2 Diabetes Mellitus by Regulating the Grin3a/AMPK Signal Axis in Hypothalamic Arcuate Nucleus.

Objective: The objective of this study was to explore the effects and related mechanisms of Roux-en-Y gastric bypass (RYGB) on insulin sensitivity in obese rats with type 2 diabetes mellitus (T2DM). Methods: The obese T2DM rat model was constructed by feeding a high-fat diet and injecting streptozotocin (STZ), and treated with RYGB. Grin3a shRNA was injected into the bilateral hypothalamic arcuate nucleus (ARC) to knockdown the Grin3a expression on T2DM rats. Eight weeks after operation, the body weight, fasting blood glucose (FBG), fasting serum insulin (FSI), homeostatic model assessment of insulin resistance (HOMA-IR), and plasma triglyceride (TG) levels were assessed. Hematoxylin & eosin (H&E) staining was adopted to observe the white adipose tissue (WAT) of rats. Western blot and qRT-PCR were used to detect the expression of Grin3a, adenosine 5' monophosphate-activated protein kinase (AMPK) and p-AMPK in ARC of rats. Later, the plasmid over-expressing or knocking down Grin3a was transfected into differentiated 3T3-L1 adipocytes, and the TG level and the formation of lipid droplets in adipocyte were assessed by TG kit and oil red O staining. The expression of lipogenic transcription factors in cells was detected by qRT-PCR. Results: RYGB reduced FBG, FSI, HOMA-IR and plasma TG levels in T2DM rats while increasing Grin3a expression and p-AMPK/AMPK ratio in ARC. Knockdown of Grin3a not only reversed the decrease of FBG, FSI, HOMA-IR and plasma TG levels in T2DM rats induced by RYGB, but also reversed the up-regulation of p-AMPK/AMPK ratio in ARC affected by RYGB. Moreover, knocking down Grin3a significantly increased the TG level, promoted the formation of lipid droplets and up-regulated the expressions of lipogenic transcription factors in adipocytes. Conclusion: RYGB improved the insulin sensitivity, reduced the plasma TG level and lessens the fat accumulation in obese T2DM rats by regulating the Grin3a/AMPK signal in ARC.

The Association of lncRNA and mRNA Changes in Adipose Tissue with Improved Insulin Resistance in Type 2 Obese Diabetes Mellitus Rats after Roux-en-Y Gastric Bypass.

Objective: Roux-en-Y gastric bypass (RYGB) has shown good effects in improving obesity and type II diabetes mellitus (T2DM), but the underlying mechanisms remain unclear. This study explored the changes of related lncRNAs, mRNAs, and signaling pathways in white adipose tissue of T2DM rats after RYGB based on RNA-Seq sequencing, with the aim to provide a theoretical basis for RYGB treatment. Methods: T2DM rat models were established by continuous feeding with a high-fat diet and injection of streptozotocin (STZ), after which they underwent RYGB or sham surgery. After the surgery, their body weight was measured weekly. Their fasting blood glucose (FBG) and fasting serum insulin (FSI) were also measured. A homeostasis model assessment of insulin resistance (HOMA-IR) was calculated at weeks 0, 8, and 12. Besides, white adipose tissue of T2DM rats was collected for RNA-Seq sequencing and validated by qRT-PCR. A series of bioinformatics analyses, such as differential expression genes (DEGs) screening, was performed. GO and KEGG functional enrichment analysis and protein-protein interaction (PPI) network construction were conducted based on the sequencing data. Results: RYGB surgery could significantly inhibit the weight growth rate and decrease the FBG, FSI, and HOMA-IR of T2DM rats. Bioinformatics analysis of RNA sequencing (RNA-Seq) results revealed that 87 DE- lncRNAs (49 upregulated and 38 downregulated) and 1,824 DEGs (896 upregulated and 928 downregulated) were present in between the RYGB group and Sham group. GO and KEGG analysis showed that the target genes of DEGs and differentially expressed lncRNAs (DE-lncRNAs) were mainly associated with amino acid metabolism, fatty acid metabolism, channel activity, and other processes. In addition, the PPI network diagram also displayed that genes such as Fasn, Grin3a, and Nog could be key genes playing a role after RYGB. qRT-PCR showed that the expression level of Grin3a in the RYGB group was significantly increased compared with the Sham group, while the expression of Fasn and Nog was significantly decreased, which was consistent with the sequencing results. Conclusion: Using RNA-Seq sequencing, this study revealed the changes of related lncRNAs, mRNAs, and signaling pathways in the white adipose tissue of T2DM rats after RYGB and identified Fasn, Grin3a, and Nog as potential key genes to function after RYGB.

In Situ CVD Derived Co-N-C Composite as Highly Efficient Cathode for Flexible Li-O2 Batteries.

To promote the development of high energy Li-O2 batteries, it is important to design and construct a suitable and effective oxygen-breathing cathode. Herein, activated cobalt-nitrogen-doped carbon nanotube/carbon nanofiber composites (Co-N-CNT/CNF) as the effective cathodes for Li-O2 batteries are prepared by in situ chemical vapor deposition (CVD). The unique architecture of these electrodes facilitates the rapid oxygen diffusion and electrolyte penetration. Meanwhile, the nitrogen-doped carbon nanotube/carbon nanofiber (N-CNT/CNF) and Co/CoNx serve as reaction sites to promote the formation/decomposition of discharge product. Li-O2 batteries with Co-N-CNT/CNF cathodes exhibit superior electrochemical performance in terms of a positive discharge plateau (2.81 V) and a low charge overpotential (0.61 V). Besides, Li-O2 batteries also present a high discharge capacity (11512.4 mAh g-1 at 100 mA g-1 ), and a long cycle life (130 cycles). Meanwhile, the Co-N-CNT/CNF cathode also has an excellent flexibility, thus the assembled flexible battery with Co-N-CNT/CNF can work normally and hold a wonderful capacity rate under various bending conditions.

A Water-/Fireproof Flexible Lithium-Oxygen Battery Achieved by Synergy of Novel Architecture and Multifunctional Separator.

To meet the increasing demands for portable and flexible devices in a rapidly developing society, it is urgently required to develop highly safe and flexible electrochemical energy-storage systems. Flexible lithium-oxygen batteries with high theoretical specific energy density are promising candidates; however, the conventional half-open structure design prevents it from working properly under water or fire conditions. Herein, as a proof-of-concept experiment, a highly safe flexible lithium-oxygen battery achieved by the synergy of a vital multifunctional structure design and a unique composite separator is proposed and fabricated. The structure can effectively prevent the invasion of water from the environment and combustion, which is further significantly consolidated with the help of a polyimide and poly(vinylidene fluoride-co-hexafluoropropylene) composite separator, which holds good water resistance, thermal stability, and ionic conductivity. Unexpectedly, the obtained lithium-oxygen battery exhibits superior flexibility, water resistance, thermal resistance, and cycling stability (up to 218 cycles; at a high current of 1 mA and capacity of 4 mA h). This novel water/fireproof, flexible lithium-oxygen battery is a promising candidate to power underwater flexible electronics.

Nanoengineered Ultralight and Robust All-Metal Cathode for High-Capacity, Stable Lithium-Oxygen Batteries.

The successful development of Li-O2 battery technology depends on resolving the issue of cathode corrosion by the discharge product (Li2O2) and/or by the intermediates (LiO2) generated during cell cycling. As an important step toward this goal, we report for the first time the nanoporous Ni with a nanoengineered AuNi alloy surface directly attached to Ni foam as a new all-metal cathode system. Compared with other noncarbonaceous cathodes, the Li-O2 cell with an all-metal cathode is capable of operation with ultrahigh specific capacity (22,551 mAh g-1 at a current density of 1.0 A g-1) and long-term life (286 cycles). Furthermore, compared with the popularly used carbon cathode, the new all-metal cathode is advantageous because it does not show measurable reactivity toward Li2O2 and/or LiO2. As a result, extensive cyclability (40 cycles) with 87.7% Li2O2 formation and decomposition was obtained. These superior properties are explained by the enhanced solvation-mediated formation of the discharge products as well as the tailored properties of the all-metal cathode, including intrinsic chemical stability, high specific surface area, highly porous structure, high conductivity, and superior mechanical stability.

Transformation of Rusty Stainless-Steel Meshes into Stable, Low-Cost, and Binder-Free Cathodes for High-Performance Potassium-Ion Batteries.

To recycle rusty stainless-steel meshes (RSSM) and meet the urgent requirement of developing high-performance cathodes for potassium-ion batteries (KIB), we demonstrate a new strategy to fabricate flexible binder-free KIB electrodes via transformation of the corrosion layer of RSSM into compact stack-layers of Prussian blue (PB) nanocubes (PB@SSM). When further coated with reduced graphite oxide (RGO) to enhance electric conductivity and structural stability, the low-cost, stable, and binder-free RGO@PB@SSM cathode exhibits excellent electrochemical performances for KIB, including high capacity (96.8 mAh g-1 ), high discharge voltage (3.3 V), high rate capability (1000 mA g-1 ; 42 % capacity retention), and outstanding cycle stability (305 cycles; 75.1 % capacity retention).

Decorating Waste Cloth via Industrial Wastewater for Tube-Type Flexible and Wearable Sodium-Ion Batteries.

To turn waste into treasure, a facile and cost-effective strategy is developed to revive electroless nickel plating wastewater and cotton-textile waste toward a novel electrode substrate. Based on the substrate, a binder-free PB@GO@NTC electrode is obtained, which exhibits superior electrochemical performance. Moreover, for the first time, a novel tube-type flexible and wearable sodium-ion battery is successfully fabricated.

Ultrathin, Lightweight, and Wearable Li-O2 Battery with High Robustness and Gravimetric/Volumetric Energy Density.

An ultrathin, lightweight, and wearable Li-O2 battery with a novel segmented structure is first fabricated by employing a "break up the whole into parts" strategy. Superior battery performance including low overpotential, high specific capacity, good rate capability, excellent cycle stability, and high gravimetric/volumetric energy density (294.68 Wh kg-1 /274.06 Wh L-1 ) is successfully achieved even under repeatedly various deformation.

Macroporous Interconnected Hollow Carbon Nanofibers Inspired by Golden-Toad Eggs toward a Binder-Free, High-Rate, and Flexible Electrode.

Inspired by the favorable structure and shape of golden-toad eggs, a self-standing macroporous active carbon fiber electrode is designed and fabricated via a facile and scalable strategy. After being decorated with ruthenium oxide, it endows Li-O2 batteries with superior electrochemical performances.

An alginate-based platform for cancer stem cell research.

UNLABELLED: As the primary determinants of the clinical behaviors of human cancers, the discovery of cancer stem cells (CSCs) represents an ideal target for novel anti-cancer therapies (Kievit et al., 2014). Notably, CSCs are difficult to propagate in vitro, which severely restricts the study of CSC biology and the development of therapeutic agents. Emerging evidence indicates that CSCs rely on a niche that controls their differentiation and proliferation, as is the case with normal stem cells (NSCs). Replicating the in vivo CSC microenvironment in vitro using three-dimensional (3D) porous scaffolds can provide means to effectively generate CSCs, thus enabling the discovery of CSC biology. This paper presents our study on a novel alginate-based platform for mimicking the CSC niche to promote CSC proliferation and enrichment. In this study, we used a versatile mouse 4T1 breast cancer model to independently evaluate the matrix parameters of a CSC niche - including the material's mechanical properties, cytokine immobilization, and the composition of the extracellular matrix's (ECM's) molecular impact - on CSC proliferation and enrichment. On this basis, the optimal stiffness and concentration of hyaluronic acid (HA), as well as epidermal growth factor and basic fibroblast growth factor immobilization, were identified to establish the platform for mimicking the 4T1 breast CSCs (4T1 CSCs) niche. The 4T1 CSCs obtained from the platform show increased expression of the genes involved in breast CSC and NSC, as compared to general 2D or 3D culture, and 4T1 CSCs were also demonstrated to have the ability to quickly form a subcutaneous tumor in homologous Balb/c mice in vivo. In addition, the platform can be adjusted according to different parameters for CSC screening. Our results indicate that our platform offers a simple and efficient means to isolate and enrich CSCs in vitro, which can help researchers better understand CSC biology and thus develop more effective therapeutic agents to treat cancer. STATEMENT OF SIGNIFICANCE: As the primary determinants of the clinical behaviors of human cancers, the discovery of cancer stem cells (CSCs) represents an ideal target for novel anti-cancer therapies. However, CSCs are difficult to propagate in vitro, which severely restricts the study of CSC biology and the development of therapeutic agents. Emerging evidence indicates that CSCs rely on a niche that controls their differentiation and proliferation, as is the case with normal stem cells (NSCs). Replicating the in vivo CSC microenvironment in vitro using three-dimensional (3D) porous scaffolds can provide means to effectively generate CSCs, thus enabling the discovery of CSC biology. In our study, a novel alginate-based platform were developed for mimicking the CSC niche to promote CSC proliferation and enrichment.

Flexible and Foldable Li-O2 Battery Based on Paper-Ink Cathode.

A flexible freestanding air cathode inspired by traditional Chinese calligraphy art is built. When this novel electrode is employed as both a new concept cathode and current collector, to replace conventional rigid and bulky counterparts, a highly flexible and foldable Li-O2 battery with excellent mechanical strength and superior electrochemical performance is obtained.

Artificial Protection Film on Lithium Metal Anode toward Long-Cycle-Life Lithium-Oxygen Batteries.

An artificial while very stable solid electrolyte interphase film is formed on lithium metal using an electrochemical strategy. When this protected Li anode is first used in a Li-O2 battery, the film formed on the anode can effectively suppress the parasitic reactions on the Li anode/electrolyte interface and significantly enhance the cycling stability of the Li-O2 battery.

Comparative study of apoptosis-related gene loci in human, mouse and rat genomes.

Many genes are involved in mammalian cell apoptosis pathway. These apoptosis genes often contain characteristic functional domains, and can be classified into at least 15 functional groups, according to previous reports. Using an integrated bioinformatics platform for motif or domain search from three public mammalian proteomes (International Protein Index database for human, mouse, and rat), we systematically cataloged all of the proteins involved in mammalian apoptosis pathway. By localizing those proteins onto the genomes, we obtained a gene locus centric apoptosis gene catalog for human, mouse and rat. Further phylogenetic analysis showed that most of the apoptosis related gene loci are conserved among these three mammals. Interestingly, about one-third of apoptosis gene loci form gene clusters on mammal chromosomes, and exist in the three species, which indicated that mammalian apoptosis gene orders are also conserved. In addition, some tandem duplicated gene loci were revealed by comparing gene loci clusters in the three species. All data produced in this work were stored in a relational database and may be viewed at http://pcas.cbi.pku.edu.cn/database/apd.php.