RESUMEN
OBJECTIVE: Many methods of acetabular reconstruction with total hip arthroplasty (THA) for Crowe type II and III adult developmental dysplasia of the hip (DDH) acetabular bone defect have been implemented clinically. However, there was no study comparing the results of integrated acetabular prosthesis (IAP) with bone grafting (BG). This study aims to investigate the efficacy of IAP and BG for acetabular reconstruction in Crowe type II and III DDH. METHODS: The clinical data of 45 patients with unilateral Crowe type II and III DDH who underwent THA from January 2020 to January 2023 were retrospectively analyzed. The patients were divided into two groups: 25 patients using 3D-printed IAP (IAP group) and 20 patients using BG (BG group). The operation time and intraoperative blood loss were recorded. The clinical outcomes were assessed by Harris Hip Score (HHS) and full weight-bearing time. The radiological outcomes were evaluated by the radiological examination. Accordingly, intraoperative and postoperative complications were observed as well. The data between the two groups were compared by independent sample t-tests and the Mann-Whitney U rank sum test. RESULTS: There were no significant differences between the two groups in Harris Hip Score (HHS) (preoperative, 6 months postoperative, and the last follow-up), leg length discrepancy (LLD), cup inclination, cup anteversion, vertical center of rotation (V-COR), horizontal center of rotation (H-COR) (p > 0.05). The mean HHS in the IAP group was higher than in the BG group at 1 and 3 months postoperative (p < 0.001). The mean surgical time and blood loss in the IAP group were less than in the BG group (p < 0.001). The mean full weight-bearing time in the IAP group was shorter than in the BG group (p < 0.01). No complications were observed in either group during the follow-up period. CONCLUSION: IAP and BG have similar radiographic outcomes and long-term clinical efficacy in THA for Crowe type II and III DDH, but the IAP technique has higher surgical safety and facilitates the recovery of hip joint function, which is worthy of clinical promotion.
RESUMEN
The joint prosthesis plays a vital role in the outcome of total hip arthroplasty. The key factors that determine the performance of joint prostheses are the materials used and the structural design of the prosthesis. This study aimed to fabricate a porous tantalum (Ta) hip prosthesis using selective laser melting (SLM) technology. The feasibility of SLM Ta use in hip prosthesis was verified by studying its chemical composition, metallographic structure and mechanical properties. In vitro experiments proved that SLM Ta exhibited better biological activities in promoting osteogenesis and inhibiting inflammation than SLM Ti6Al4V. Then, the topological optimization design of the femoral stem of the SLM Ta hip prosthesis was carried out by finite element simulation, and the fatigue performance of the optimized prosthesis was tested to verify the biomechanical safety of the prosthesis. A porous Ta acetabulum cup was also designed and fabricated using SLM. Its mechanical properties were then studied. Finally, clinical trials were conducted to verify the clinical efficacy of the SLM Ta hip prosthesis. The porous structure could reduce the weight of the prosthesis and stress shielding and avoid bone resorption around the prosthesis. In addition, anti-infection drugs can also be loaded into the pores for infection treatment. The acetabular cup can be custom-designed based on the severity of bone loss on the acetabular side, and the integrated acetabular cup can repair the acetabular bone defect while achieving the function of the acetabular cup.
RESUMEN
Porous tantalum scaffolds offer a high degree of biocompatibility and have a low friction coefficient. In addition, their biomimetic porous structure and mechanical properties, which closely resemble human bone tissue, make them a popular area of research in the field of bone defect repair. With the rapid advancement of additive manufacturing, 3D-printed porous tantalum scaffolds have increasingly emerged in recent years, offering exceptional design flexibility, as well as facilitating the fabrication of intricate geometries and complex pore structures that similar to human anatomy. This review provides a comprehensive description of the techniques, procedures, and specific parameters involved in the 3D printing of porous tantalum scaffolds. Concurrently, the review provides a summary of the mechanical properties, osteogenesis and antibacterial properties of porous tantalum scaffolds. The use of surface modification techniques and the drug carriers can enhance the characteristics of porous tantalum scaffolds. Accordingly, the review discusses the application of these porous tantalum materials in clinical settings. Multiple studies have demonstrated that 3D-printed porous tantalum scaffolds exhibit exceptional corrosion resistance, biocompatibility, and osteogenic properties. As a result, they are considered highly suitable biomaterials for repairing bone defects. Despite the rapid development of 3D-printed porous tantalum scaffolds, they still encounter challenges and issues when used as bone defect implants in clinical applications. Ultimately, a concise overview of the primary challenges faced by 3D-printed porous tantalum scaffolds is offered, and corresponding insights to promote further exploration and advancement in this domain are presented.
Asunto(s)
Materiales Biocompatibles , Sustitutos de Huesos , Huesos , Osteogénesis , Impresión Tridimensional , Tantalio , Ingeniería de Tejidos , Andamios del Tejido , Tantalio/química , Andamios del Tejido/química , Porosidad , Humanos , Materiales Biocompatibles/química , Ingeniería de Tejidos/métodos , Animales , Sustitutos de Huesos/química , Ensayo de Materiales , Regeneración ÓseaRESUMEN
Objective: This study aimed to evaluate the biomechanical effectiveness of 3D-printed integrated acetabular prosthesis (IAP) and modular acetabular prosthesis (MAP) in reconstructing the acetabulum for patients with Crowe III developmental dysplasia of the hip (DDH). The results of this study can provide a theoretical foundation for the treatment of Crowe III DDH in total hip arthroplasty (THA). Methods: Finite element (FE) analysis models were created to reconstruct Crowe III DDH acetabular defects using IAP and MAP. The contact stress and relative micromotion between the acetabular prosthesis and the host bone were analyzed by gradually loading in three increments (210 N, 2100 N, and 4200 N). In addition, five patients with Crowe III DDH who underwent IAP acetabular reconstruction were observed. Results: At the same load, the peak values of IAP contact stress and relative micromotion were lower than those of MAP acetabular reconstruction. Under jogging load, the MAP metal augment's peak stress exceeded porous tantalum yield strength, and the risk of prosthesis fracture was higher. The peak stress in the bone interface in contact with the MAP during walking and jogging was higher than that in the cancellous bone, while that of IAP was higher than that of the cancellous bone only under jogging load, so the risk of MAP cancellous bone failure was greater. Under jogging load, the relative micromotion of the MAP reconstruction acetabular implant was 45.2 µm, which was not conducive to bone growth, while under three different loads, the relative micromotion of the IAP acetabular implant was 1.5-11.2 µm, all <40 µm, which was beneficial to bone growth. Five patients with IAP acetabular reconstruction were followed up for 11.8 ± 3.4 months, and the Harris score of the last follow-up was 85.4 ± 5.5. The imaging results showed good stability of all prostheses with no adverse conditions observed. Conclusion: Compared with acetabular reconstruction with MAP, IAP has a lower risk of loosening and fracture, as well as a better long-term stability. The application of IAP is an ideal acetabular reconstruction method for Crowe III DDH.
RESUMEN
BACKGROUND: Orthotopic cardiac xenotransplantation has seen substantial advancement in the last years and the initiation of a clinical pilot study is close. However, donor organ overgrowth has been a major hurdle for preclinical experiments, resulting in loss of function and the decease of the recipient. A better understanding of the pathogenesis of organ overgrowth after xenotransplantation is necessary before clinical application. METHODS: Hearts from genetically modified ( GGTA1-KO , hCD46/hTBM transgenic) juvenile pigs were orthotopically transplanted into male baboons. Group I (control, n = 3) received immunosuppression based on costimulation blockade, group II (growth inhibition, n = 9) was additionally treated with mechanistic target of rapamycin inhibitor, antihypertensive medication, and fast corticoid tapering. Thyroid hormones and insulin-like growth factor 1 were measured before transplantation and before euthanasia, left ventricular (LV) growth was assessed by echocardiography, and hemodynamic data were recorded via a wireless implant. RESULTS: Insulin-like growth factor 1 was higher in baboons than in donor piglets but dropped to porcine levels at the end of the experiments in group I. LV mass increase was 10-fold faster in group I than in group II. This increase was caused by nonphysiological LV wall enlargement. Additionally, pressure gradients between LV and the ascending aorta developed, and signs of dynamic left ventricular outflow tract (LVOT) obstruction appeared. CONCLUSIONS: After orthotopic xenotransplantation in baboon recipients, untreated porcine hearts showed rapidly progressing concentric hypertrophy with dynamic LVOT obstruction, mimicking hypertrophic obstructive cardiomyopathy in humans. Antihypertensive and antiproliferative drugs reduced growth rate and inhibited LVOT obstruction, thereby preventing loss of function.
Asunto(s)
Trasplante de Corazón , Obstrucción del Flujo de Salida Ventricular Izquierda , Humanos , Animales , Masculino , Porcinos , Xenoinjertos , Trasplante Heterólogo/métodos , Papio , Factor I del Crecimiento Similar a la Insulina , Antihipertensivos , Proyectos Piloto , Hipertrofia Ventricular Izquierda , Trasplante de Corazón/efectos adversos , Trasplante de Corazón/métodosRESUMEN
OBJECTIVE: The treatment of acetabular defects is one of the most difficult challenges of revision of total hip arthroplasty (RTHA), and tantalum is regarded as a promising bone substitute material. This study aims to investigate the effectiveness of 3D printed acetabular augment used in RTHA for the treatment of acetabular bone defect. METHODS: A retrospective analysis of the clinical data of seven patients who had undergone RTHA was carried out using 3D printed acetabular augment from January 2017 to December 2018. The CT data of the patients were exported to Mimics 21.0 software (Materialise, Leuven, Belgium), and the acetabular bone defect augment were designed, printed and then implanted during operation. The postoperative Harris score, visual analogue scale (VAS) score and prosthesis position were observed to evaluate the clinical outcome. A I-test was used for preoperative and postoperative comparison of the paired-design dataset. RESULTS: A firm attachment of the bone augment to the acetabulum during operation without any complications was found during the follow-up time 2.8-4.3 years. The VAS score of all patients was found 6.9 ± 1.4 before operation and was 0.7 ± 0.7 at the last follow-up (P ≤ 0.001), and the Harris hip scores, were 31.9 ± 10.3 and 73.3 ± 12.8 before operation, and at the last follow-up (P ≤ 0.001), respectively. Moreover, no loosening sign between the bone defect augment and the acetabulum was observed during the entire implantation period. CONCLUSION: 3D printed acetabular augment is effective in reconstructing the acetabulum following an acetabular bone defect revision, which enhances the hip joint function and eventually makes a satisfactory stable prosthetic.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Prótesis de Cadera , Humanos , Acetábulo/cirugía , Tantalio , Estudios Retrospectivos , Reoperación , Impresión Tridimensional , Falla de Prótesis , Estudios de Seguimiento , Resultado del TratamientoRESUMEN
Objective: To summarize the characteristics and biomechanical research progress of common acetabular reconstruction techniques in patients with Crowe type â ¡ and â ¢ developmental dysplasia of the hip (DDH) undergoing total hip arthroplasty (THA), and provide references for selecting appropriate acetabular reconstruction techniques for clinical treatment of Crowe type â ¡ and â ¢ DDH. Methods: The domestic and foreign relevant literature on biomechanics of acetabular reconstruction with Crowe type â ¡ and â ¢ DDH was reviewed, and the research progress was summarized. Results: At present, there are many acetabular reconstruction techniques in Crowe type â ¡ and â ¢ DDH patients undergoing THA, with their own characteristics due to structural and biomechanical differences. The acetabular roof reconstruction technique enables the acetabular cup prosthesis to obtain satisfactory initial stability, increases the acetabular bone reserve, and provides a bone mass basis for the possible secondary revision. The medial protrusio technique (MPT) reduces the stress in the weight-bearing area of the hip joint and the wear of the prosthesis, and increases the service life of the prosthesis. Small acetabulum cup technique enables shallow small acetabulum to match suitable acetabulum cup to obtain ideal cup coverage, but small acetabulum cup also increases the stress per unit area of acetabulum cup, which is not conducive to the long-term effectiveness. The rotation center up-shifting technique increases the initial stability of the cup. Conclusion: Currently, there is no detailed standard guidance for the selection of acetabular reconstruction in THA with Crowe type â ¡ and â ¢ DDH, and the appropriate acetabular reconstruction technique should be selected according to the different types of DDH.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Displasia del Desarrollo de la Cadera , Luxación Congénita de la Cadera , Prótesis de Cadera , Humanos , Acetábulo/cirugía , Luxación Congénita de la Cadera/cirugía , Displasia del Desarrollo de la Cadera/complicaciones , Displasia del Desarrollo de la Cadera/cirugía , Articulación de la Cadera/cirugía , Artroplastia de Reemplazo de Cadera/métodos , Resultado del Tratamiento , Estudios RetrospectivosRESUMEN
With continuous developments in additive manufacturing technology, tantalum (Ta) metal has been manufactured into orthopaedic implants with a variety of forms, properties and uses by three-dimensional printing. Based on extensive research in recent years, the design, processing and performance aspects of this new orthopaedic implant material have been greatly improved. Besides the bionic porous structure and mechanical characteristics that are similar to human bone tissue, porous tantalum is considered to be a viable bone repair material due to its outstanding corrosion resistance, biocompatibility, bone integration and bone conductivity. Numerous in vitro, in vivo, and clinical studies have been carried out in order to analyse the safety and efficacy of these implants in orthopaedic applications. This study reviews the most recent advances in manufacturing, characteristics and clinical application of porous tantalum materials.
RESUMEN
BACKGROUND: Successful preclinical transplantations of porcine hearts into baboon recipients are required before commencing clinical trials. Despite years of research, over half of the orthotopic cardiac xenografts were lost during the first 48 hours after transplantation, primarily caused by perioperative cardiac xenograft dysfunction (PCXD). To decrease the rate of PCXD, we adopted a preservation technique of cold non-ischemic perfusion for our ongoing pig-to-baboon cardiac xenotransplantation project. METHODS: Fourteen orthotopic cardiac xenotransplantation experiments were carried out with genetically modified juvenile pigs (GGTA1- KO/hCD46/hTBM) as donors and captive-bred baboons as recipients. Organ preservation was compared according to the two techniques applied: cold static ischemic cardioplegia (IC; n = 5) and cold non-ischemic continuous perfusion (CP; n = 9) with an oxygenated albumin-containing hyperoncotic cardioplegic solution containing nutrients, erythrocytes and hormones. Prior to surgery, we measured serum levels of preformed anti-non-Gal-antibodies. During surgery, hemodynamic parameters were monitored with transpulmonary thermodilution. Central venous blood gas analyses were taken at regular intervals to estimate oxygen extraction, as well as lactate production. After surgery, we measured troponine T and serum parameters of the recipient's kidney, liver and coagulation functions. RESULTS: In porcine grafts preserved with IC, we found significantly depressed systolic cardiac function after transplantation which did not recover despite increasing inotropic support. Postoperative oxygen extraction and lactate production were significantly increased. Troponin T, creatinine, aspartate aminotransferase levels were pathologically high, whereas prothrombin ratios were abnormally low. In three of five IC experiments, PCXD developed within 24 hours. By contrast, all nine hearts preserved with CP retained fully preserved systolic function, none showed any signs of PCXD. Oxygen extraction was within normal ranges; serum lactate as well as parameters of organ functions were only mildly elevated. Preformed anti-non-Gal-antibodies were similar in recipients receiving grafts from either IC or CP preservation. CONCLUSIONS: While standard ischemic cardioplegia solutions have been used with great success in human allotransplantation over many years, our data indicate that they are insufficient for preservation of porcine hearts transplanted into baboons: Ischemic storage caused severe impairment of cardiac function and decreased tissue oxygen supply, leading to multi-organ failure in more than half of the xenotransplantation experiments. In contrast, cold non-ischemic heart preservation with continuous perfusion reliably prevented early graft failure. Consistent survival in the perioperative phase is a prerequisite for preclinical long-term results after cardiac xenotransplantation.
Asunto(s)
Trasplante de Corazón , Animales , Xenoinjertos , Papio , Perfusión , Porcinos , Trasplante HeterólogoRESUMEN
BACKGROUND: The demand for donated human hearts far exceeds the number available. Xenotransplantation of genetically modified porcine organs provides an alternative. In 2000, an Advisory Board of the International Society for Heart and Lung Transplantation set the benchmark for commencing clinical cardiac xenotransplantation as consistent 60% survival of non-human primates after life-supporting porcine heart transplantations. Recently, we reported the stepwise optimization of pig-to-baboon orthotopic cardiac xenotransplantation finally resulting in consistent success, with 4 recipients surviving 90 (nâ¯=â¯2), 182, and 195 days. Here, we report on 4 additional recipients, supporting the efficacy of our procedure. RESULTS: The first 2 additional recipients succumbed to porcine cytomegalovirus (PCMV) infections on Days 15 and 27, respectively. In 2 further experiments, PCMV infections were successfully avoided, and 3-months survival was achieved. Throughout all the long-term experiments, heart, liver, and renal functions remained within normal ranges. Post-mortem cardiac diameters were slightly increased when compared with that at the time of transplantation but with no detrimental effect. There were no signs of thrombotic microangiopathy. The current regimen enabled the prolonged survival and function of orthotopic cardiac xenografts in altogether 6 of 8 baboons, of which 4 were now added. These results exceed the threshold set by the Advisory Board of the International Society for Heart and Lung Transplantation. CONCLUSIONS: The results of our current and previous experimental cardiac xenotransplantations together fulfill for the first time the pre-clinical efficacy suggestions. PCMV-positive donor animals must be avoided.
Asunto(s)
Rechazo de Injerto/etiología , Trasplante de Corazón/métodos , Donantes de Tejidos , Animales , Supervivencia de Injerto , Humanos , Porcinos , Trasplante HeterólogoRESUMEN
Professor ZHANG Ren's clinical experience of acupuncture for glaucoma is summarized. Professor ZHANG believes that key pathogenesis of glaucoma is stagnation of qi and blood in the eyes, obstruction of xuanfu in the eyes, and obstruction of meridians. The treatment should focus on the eye, with smoothing the liver and keeping functional state of six-fu as priority; he also emphasizes the acupoint selection based on the combination of disease differentiation and syndrome differentiation, and pays attention to the application of acupuncture method of promoting qi circulation and inducting qi movement. Professor ZHANG proposes that the patients should be treated according to different types, and stresses the importance of using comprehensive treatment and emotional adjustment method, as well as early intervention, long-term adherence and regular treatment.
Asunto(s)
Terapia por Acupuntura , Glaucoma , Meridianos , Puntos de Acupuntura , Glaucoma/terapia , Humanos , Masculino , SíndromeRESUMEN
Needle retention is an important step in the acupuncture procedure. How to optimize scientifically the duration of needle retention according to individual case has been considered in the medical circle. In this paper, by collecting the literatures on needle retention from the early Qin dynasty to the contemporary time, the evolution of the needle retention from a short duration to a long one with the productivity improvement was elaborated. On the base of the views of the medical scholars of all dynasties, it was concluded that the ultimate purpose of needle retention is to improve the effects of acupuncture on the premise of ensuring the safety of acupuncture. Hence, the clinical physician should optimize the duration of needle retention cautiously in compliance with the tolerance of patient so as to save the time cost of both physician and patient, avoid the occurrence of tolerable effect of acupuncture and reduce the potential safety hazard of acupuncture induced by the long duration of needle retention.
Asunto(s)
Terapia por Acupuntura , Moxibustión , Médicos , Humanos , Agujas , Factores de TiempoRESUMEN
In this Letter, Mayuko Kurome and Valeri Zakhartchenko have been added to the author list (affiliated with Institute of Molecular Animal Breeding and Biotechnology, Gene Center, LMU Munich, Munich, Germany). The author list and 'Author contributions' section have been corrected online; see accompanying Amendment.
RESUMEN
Heart transplantation is the only cure for patients with terminal cardiac failure, but the supply of allogeneic donor organs falls far short of the clinical need1-3. Xenotransplantation of genetically modified pig hearts has been discussed as a potential alternative4. Genetically multi-modified pig hearts that lack galactose-α1,3-galactose epitopes (α1,3-galactosyltransferase knockout) and express a human membrane cofactor protein (CD46) and human thrombomodulin have survived for up to 945 days after heterotopic abdominal transplantation in baboons5. This model demonstrated long-term acceptance of discordant xenografts with safe immunosuppression but did not predict their life-supporting function. Despite 25 years of extensive research, the maximum survival of a baboon after heart replacement with a porcine xenograft was only 57 days and this was achieved, to our knowledge, only once6. Here we show that α1,3-galactosyltransferase-knockout pig hearts that express human CD46 and thrombomodulin require non-ischaemic preservation with continuous perfusion and control of post-transplantation growth to ensure long-term orthotopic function of the xenograft in baboons, the most stringent preclinical xenotransplantation model. Consistent life-supporting function of xenografted hearts for up to 195 days is a milestone on the way to clinical cardiac xenotransplantation7.
Asunto(s)
Trasplante de Corazón , Xenoinjertos/trasplante , Papio , Porcinos , Trasplante Heterólogo , Animales , Anticuerpos/análisis , Anticuerpos/sangre , Proteínas del Sistema Complemento/análisis , Enzimas/sangre , Fibrina/análisis , Galactosiltransferasas/deficiencia , Galactosiltransferasas/genética , Xenoinjertos/patología , Humanos , Hígado/enzimología , Masculino , Proteína Cofactora de Membrana/genética , Proteína Cofactora de Membrana/metabolismo , Miocardio/enzimología , Necrosis , Perfusión , Recuento de Plaquetas , Tiempo de Protrombina , Trombomodulina/genética , Trombomodulina/metabolismo , Factores de TiempoRESUMEN
OBJECTIVE: Klebsiella pneumoniae carbapenemases-producing Klebsiella pneumoniae (KPC-Kp) has caused a global public health crisis, and the severity of its infection is associated with high mortality in hospitalized patients. Therefore, the KPC-Kp prevention methods and the corresponding treatment strategy exploration are imminent. The risk factors and the treatment progress of KPC-Kp colonization or infection are reviewed in this paper to explore corresponding preventive measures and treatment strategies for clinical prevention and treatment.