RESUMEN
Coiled artificial muscle yarns outperform their straight counterparts in contractile strokes. However, challenges persist in the fabrication complexity and the susceptibility of the coiled yarns to becoming stuck by surrounding objects during contraction and recovery. Additionally, torsional stability remains a concern. In this study, it is reported that straight carbon nanotube (CNT) yarns when driven by a low-voltage electrochemical approach, can achieve a contractile stroke that surpasses even NiTi shape memory alloy fibers. The key lies in the suitable match between a yarn consisting of randomly aligned CNTs and the reversible and substantial electrochemical swelling induced by solvated ions. Wrinkled structures are formed on the surface of the CNT yarn to adapt to the swelling process. This not only assures torsional stability but also enhances the surface area for improved electrode-electrolyte interaction during electrochemical actuation. Remarkably, the CNT artificial muscle yarn generates a contractile stroke of 8.8% and an isometric stress of 7.5 MPa under 2.5 V actuation voltages, demonstrating its potential for applications requiring low energy consumption while maintaining high operational efficiency. This study highlights the crucial impact of CNT orientation on the effectiveness of electrochemically-driven artificial muscles, signaling new possibilities in smart material and biomechanical system development.
RESUMEN
Bismuth oxide (Bi2O3) materials are considered as great promising anodes for aqueous batteries on account of the high capacity as well as wide potential plateau. Nevertheless, the low conductivity and severe volumetric change of Bi2O3 in the course of cycling are the main limiting factors for their application in energy-storage systems. Herein, we propose and design unique hierarchical heterostructures constructed by Bi2O3 and Bi2S3 nanosheets (NSs) manufactured immediately on the surface of carbon nanotube fibers (CNTFs). The Bi2O3-Bi2S3 (BO-BS) exhibits enhanced conductivity and increased stability in comparison with pure Bi2O3 and Bi2S3. The BO-BS NSs/CNTF electrode indicates exceptional rate capability and cycling stability, while creating a high reversible capacity of 0.68 mAh cm-2 at 4 mA cm-2, as anticipated. Additionally, the quasi-solid-state fibrous aqueous Ni//Bi battery that was built with the BO-BS NSs/CNTF anode delivers an exceptional cycling stability of 52.7% capacity retention after 4000 cycles at 80 mA cm-2, an ultrahigh capacity of 0.35 mAh cm-2 at 4 mA cm-2, and a high energy density of 340.1 mWh cm-3 at 880 mW cm-3. This work demonstrates the potential of constructing hierarchical heterostructures of bismuth-based materials for high-performance aqueous Ni//Bi batteries and other energy-storage devices.
RESUMEN
High dynamic strength is of fundamental importance for fibrous materials that are used in high-strain rate environments. Carbon nanotube fibers are one of the most promising candidates. Using a strategy to optimize hierarchical structures, we fabricated carbon nanotube fibers with a dynamic strength of 14 gigapascals (GPa) and excellent energy absorption. The dynamic performance of the fibers is attributed to the simultaneous breakage of individual nanotubes and delocalization of impact energy that occurs during the high-strain rate loading process; these behaviors are due to improvements in interfacial interactions, nanotube alignment, and densification therein. This work presents an effective strategy to utilize the strength of individual carbon nanotubes at the macroscale and provides fresh mechanism insights.
RESUMEN
High-performance electromagnetic interference (EMI) shielding materials with ultrathin, flexible, and pliable mechanical properties are highly desired for high-end equipments, yet there remain large challenges in the manufacture of these materials. Here, carbon nanotube film (CNTF)/copper (Cu) nanoparticle (NP) composite films are fabricated via a facile electrodeposition method to achieve high electromagnetic shielding efficiency. Notably, a CNTF/Cu NP composite film with 15 µm thickness can achieve excellent EMI shielding efficiency of â¼248 dB and absolute EMI shielding effectiveness as high as 2.17 × 105 dB cm2 g-1, which are the best values for composite EMI shielding materials with similar or greater thicknesses. These engineered composite films exhibit excellent deformation tolerance, which ensures the robust reliability of EMI shielding efficiency after 20,000 cycles of repeated bending. Our results represent a critical breakthrough in the preparation of ultrathin, flexible, and pliable shielding films for applications in smart, portable and wearable electronic devices, and 5G communication.
RESUMEN
Aqueous Zn-metal battery is considered as a promising energy-storage system. However, uncontrolled zinc dendrite growth is the main cause of short-circuit failure in aqueous Zn-based batteries. One of the most efficient and convenient strategies to alleviate this issue is to introduce appropriate zincophilic nucleation sites to guide zinc metal deposition and regulate crystal growth. Herein, this work proposes Bi2O3/Bi nanosheets anchored on the cell wall surface of the 3D porous conductive host as the Zn deposition sites to modulate Zn deposition behavior and hence inhibit the zinc dendrite growth. Density functional theory and experimental results demonstrate that Bi2O3 has a super zinc binding energy and strong adsorption energy with zinc (002) plane, as a super-zincophilic nucleation site, which results in the deposition of zinc preferentially along the horizontal direction of (002) crystal plane, fundamentally avoids the formation of Zn dendrites. Benefiting from the synergistic effect Bi2O3/Bi zincophilic sites and 3D porous structure in the B-BOGC host, the electrochemical performance of the constructed Zn-based battery is significantly improved. As a result, the Zn anode cycles for 1500 cycles at 50 mA cm-2 and 1.0 mAh cm-2. Meanwhile, the Zn@B-BOGC//MnO2 full cell can operate stably for 2000 cycles at 2.0 A g-1.
RESUMEN
Nonmetallic ammonium ions that feature high safety, low molar mass, and small hydrated radius properties have shown great advantages in wearable aqueous supercapacitors. The construction of high-energy-density flexible ammonium-ion asymmetric supercapacitors (AASCs) is promising but still challenging due to the lack of high-capacitance pseudocapacitive anodes. Herein, freestanding core-shell heterostructures supported on carbon nanotube fibers were designed by anchoring MoS2 nanosheets on nanowires (MoS2@TiN/CNTF) as anodes for AASCs. With contributions of abundant active sites and conspicuous synergistic effects of multiple components for arrayed heterostructure engineering, the developed MoS2@TiN/CNTF anodes exhibit a specific capacitance of 1102.5 mF cm-2 at 2 mA cm-2. Theoretical calculations confirm the dramatic enhancement of the binding strength of ammonium ions on the MoS2 shell layer at the heterostructure, where a built-in electric field exists to accelerate the charge transfer. By utilizing a MnO2/CNTF cathode and NH4Cl/poly(vinyl alcohol) (PVA) as a gel electrolyte, quasi-solid-state fiber-shaped AASCs were successfully constructed, achieving a specific capacitance of 351.2 mF cm-2 and an energy density of 195.1 µWh cm-2, outperforming most recently reported fiber-shaped supercapacitors. This work provides a promising strategy to rationally design heterostructure engineering of MoS2@TiN nanoarrays toward advanced anodes for application in next-generation AASCs.
RESUMEN
Carbon nanotube (CNT)/copper (Cu) composite fibers are placed great expectations as the next generation of light-weight, conductive wires. However, the electrical and mechanical performances still need to be enhanced. Herein, we demonstrate a strategy that is electrodeposition Cu on thiolated CNT fibers to solve the grand challenge which is enhancing the performance of CNT/Cu composite fibers. Thiol groups are introduced to the surface of the CNT fibers through a controllable O2plasma carboxylation process and amide reaction. Compared with CNT/Cu composite fibers, there are 82.7% and 29.6% improvements in electrical conductivity and tensile strength of interface thiol-modification composite fibers. The enhancement mechanism is also explored that thiolated CNT fibers could make strong interactions between Cu and CNT, enhancing the electrical and mechanical performance of CNT/Cu composites. This work proposes a convenient, heat-treatment-free strategy for high-performance CNT/Cu composite fibers, which can be manufactured for large-scale production and applied to next-generation conductive wires.
RESUMEN
To address the lack of a suitable electrolyte that supports the stable operation of the electrochemical yarn muscles in air, an ionic-liquid-in-nanofibers sheathed carbon nanotube (CNT) yarn muscle is prepared. The nanofibers serve as a separator to avoid the short-circuiting of the yarns and a reservoir for ionic liquid. The ionic-liquid-in-nanofiber-sheathed yarn muscles are strong, providing an isometric stress of 10.8 MPa (about 31 times the skeletal muscles). The yarn muscles are highly robust, which can reversibly contract stably at such conditions as being knotted, wide-range humidity (30 to 90 RH%) and temperature (25 to 70 °C), and long-term cycling and storage in air. By utilizing the accumulated isometric stress, the yarn muscles achieve a high contraction rate of 36.3% s-1 . The yarn muscles are tightly bundled to lift heavy weights and grasp objects. These unique features can make the strong and robust yarn muscles as a desirable actuation component for robotic devices.
Asunto(s)
Líquidos Iónicos , Nanofibras , Nanotubos de Carbono , Electrólitos , Músculo EsqueléticoRESUMEN
Aligned carbon nanotube (CNT) fibers have been considered as one of the ideal candidate electrodes for fiber-shaped energy harvesting and storage devices, due to their merits of flexibility, lightweight, desirable mechanical property, outstanding electrical conductivity as well as high specific surface area. Herein, the recent advancements on the aligned CNT fibers for energy harvesting and storage devices are reviewed. The synthesis, structure, and properties of aligned carbon nanotube fibers are briefly summarized. Then, their applications in fiber-shaped energy harvesting and storage devices (i.e., solar cells, supercapacitors, and batteries) are demonstrated. The remaining challenges are finally discussed to highlight the future research direction in the development of aligned CNT fibers for fiber-shaped energy devices.
RESUMEN
With the development of flexible electronics and wearable devices, there is strong demand for flexible, superhydrophobic, and multifunctional coatings. Motivated by the promise of attractive multifaceted functionality, various techniques have been developed to fabricate flexible surfaces with non-wetting properties. However, until now, there have been few reports on superhydrophobic surfaces with condensate microdrop self-propelling (CMDSP) functionality on a carbon nanotube film. Here, we used a facile electrodeposition method to develop for the first time a new type of flexible superhydrophobic surface with CMDSP functionality based on carbon nanotube films. These flexible CMDSP surfaces are robust after multiple cycles of bending of the film-coated substrate, i.e., without impacting the surface superhydrophobicity and CMDSP performance. The proposed light and flexible surface, combined with CMDSP, will support a novel generation of coatings that are multifunctional, flexible, smart, and energy saving. This new type of functional flexible interface not only opens new avenues in research into the fundamental structure-property relationships of materials, but also exhibits significant application potential for advanced technologies.
RESUMEN
Carbon-nanotube (CNT) fibers integrate such properties as high mechanical strength, extraordinary structural flexibility, high thermal and electrical conductivities, novel corrosion and oxidation resistivities, and high surface area, which makes them a very promising candidate for next-generation smart textiles and wearable devices. A brief review of the preparation of CNT fibers and recently developed CNT-fiber-based flexible and functional devices, which include artificial muscles, electrochemical double-layer capacitors, lithium-ion batteries, solar cells, and memristors, is presented.
RESUMEN
We introduce a simple approach to fabricate an aligned carbon nanotube (ACNT) device for broadband polarization control in fiber laser systems. The ACNT device was fabricated by pulling from as-fabricated vertically-aligned carbon nanotube arrays. Their anisotropic properties are confirmed with various microscopy techniques. The device was then integrated into fiber laser systems (at two technologically important wavelengths of 1 and 1.5 µm) for polarization control. We obtained a linearly-polarized light output with the maximum extinction ratio of â¼12 dB. The output polarization direction could be fully controlled by the ACNT alignment direction in both lasers. To the best of our knowledge, this is the first time that the ACNT device is applied to polarization control in laser systems. Our results exhibit that the ACNT device is a simple, low-cost, and broadband polarizer to control laser polarization dynamics, for various photonic applications (such as material processing, polarization diversity detection in communications etc.), where linear polarization control is necessary.
RESUMEN
The development of low-cost and high-efficiency silicon Schottky solar cells has drawn considerable interest in recent years. A facial approach for the fabrication of carbon nanotube-silicon (CNT-Si) Schottky solar cells by using aligned double-walled CNTs drawn from a CNT array is demonstrated. The aligned CNTs help to form high CNT-Si junction density and provide efficient charge-transport paths. The power conversion efficiency (PCE) reaches 10.5%, which is higher than that of solar cells fabricated using pristine and random CNT networks. Furthermore, the cell fabrication is scalable, and the solar cells fabricated in one batch show very small PCE fluctuations.
RESUMEN
Carbon nanotube (CNT)/semiconducting oxide hybrids are an ideal architecture for light-harvesting devices, in which the CNTs are expected to not only act as a scaffold but also provide fast transport paths for photogenerated charges in the oxide. However, the current potential of CNTs for charge transport is largely suppressed due to the nanotubes not being interconnected but isolated by the low conductive oxide coatings. Herein, a flexible and conductive CNT/TiO(2) core/shell heterostructure film is reported, with aligned and interconnected CNTs wrapped in a continuous TiO(2) coating. Without using additional transparent conducting oxide (TCO) substrates, this unique feature of the film boosts the incident photon-to-electron conversion efficiency to 32%, outperforming TiO(2) nanoparticle electrodes fabricated on TCO substrates. Moreover, the film shows high structural stability and can generate a stable photocurrent even after being bent hundreds of times.
RESUMEN
We develop a simple dry wrapping method to fabricate a tungsten oxide (WO(3))/carbon nanotube (CNT) cable, in which WO(3) layers act as an electrochromic component while aligned CNTs as the core provide mechanical support and an anisotropic, continuous electron transport pathway. Interestingly, the resultant cable material exhibits an obvious gradient electrochromic phenomenon.
RESUMEN
Preparation of strong, flexible, and multifunctional carbon-based films has attracted considerable interest not only in fundamental research areas but also for industrial applications. We report a binder-free, ultrastrong, and foldable carbon nanotube (CNT) film using aligned few-walled nanotube sheets drawn from spinnable nanotube arrays. The film exhibits tensile strengths up to â¼2 GPa and a Young's modulus up to â¼90 GPa, which is markedly superior to other types of carbon-based films reported, including commercial graphite foils, buckypapers, and graphene-related papers. The film can bear severe bending (even being folded) and shows good structure integrity and negligible change in electric conductivity. The unique structure of the CNT film (good nanotube alignment, high packing density) provides the film with direct and efficient transport paths for electricity. As a flexible charge collector, it favors a magnesium oxide coating to exhibit high charge/discharge rate stability and an excellent electrochemical capacitance close to its theoretical value.
Asunto(s)
Membranas Artificiales , Nanotubos de Carbono/química , Nanotubos de Carbono/ultraestructura , Fuerza Compresiva , Módulo de Elasticidad , Conductividad Eléctrica , Sustancias Macromoleculares/química , Ensayo de Materiales , Conformación Molecular , Tamaño de la Partícula , Propiedades de Superficie , Resistencia a la TracciónRESUMEN
Carbon nanotube (CNT) fiber is a promising candidate for lightweight cables. The introduction of metal particles on a CNT fiber can effectively improve its electrical conductivity. However, the decrease in strength is observed in CNT-metal composite fibers. Here we demonstrate a continuous process, which combines fiber spinning, CNT anodization and metal deposition, to fabricate lightweight and high-strength CNT-Cu fibers with metal-like conductivities. The composite fiber with anodized CNTs exhibits a conductivity of 4.08 × 10(4)-1.84 × 10(5) S cm(-1) and a mass density of 1.87-3.08 g cm(-3), as the Cu thickness is changed from 1 to 3 µm. It can be 600-811 MPa in strength, as strong as the un-anodized pure CNT fiber (656 MPa). We also find that during the tensile tests there are slips between the inner CNTs and the outer Cu layer, leading to the drops in electrical conductivity. Therefore, there is an effective fiber strength before which the Cu layer is robust. Due to the improved interfacial bonding between the Cu layer and the anodized CNT surfaces, such effective strength is still high, up to 490-570 MPa.
Asunto(s)
Carbono/química , Cobre/química , Nanotubos de Carbono/química , Fibra de Carbono , Galvanoplastia , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
A composite film with switchable transparency is fabricated by sandwiching a carbon nanotube (CNT) sheet within polyurethane (PU) films. The introduction of CNTs not only makes the composite film electrically conductive but also induces a rapid crystal melting of soft segments in the PU. As a result, the film can be switched from opaque to transparent in just several seconds after turning on voltage, and reversed back to opaque after turning off voltage. The film also possesses several other attractive properties, including excellent flexibility, low energy consumption, switching speed insensitivity to ambient temperature, and easy coloration, which make the film promising for a wide variety of practical applications.
Asunto(s)
Electroquímica/instrumentación , Membranas Artificiales , Nanotubos de Carbono/química , Nanotubos de Carbono/efectos de la radiación , Refractometría/métodos , Conductividad Eléctrica , Campos Electromagnéticos , Luz , Dispersión de RadiaciónRESUMEN
The introduction of twist during the spinning of carbon nanotubes from their arrays (forests) has been widely applied in making ultrastrong, stiff, and lightweight nanotube fibers. Here, for the first time, an important observation of a double-peak behavior of the tensile properties, as a function of the twist angle, that is different from the single peak of traditional fibers is reported. Raman spectra show that the new peak arises from the collapse of nanotubes, showing a strong "nano" element in applying the ancient draw-and-twist technique, besides the downsizing. A qualitative continuum model is also presented to describe the collapse-induced enhancement as well as traditional fibers. Our combined experimental and theoretical studies indicate the direction of full utilization of the nano element in improving the mechanical properties of nanotube fibers.