Surgical Resection of Neurogenic Heterotopic Ossification around Hip Joint in Stroke Patients: A Safety and Outcome Report.

Purpose: Resection remains the most reliable treatment for established heterotopic ossification, despite questions regarding its effectiveness due to the potential for complications. This study evaluated the clinical outcomes and complications of neurogenic heterotopic ossification (NHO) resection in stroke patients' ankylosed hips. Materials and Methods: We retrospectively analyzed nine hip NHO resections performed on seven patients from 2010 to 2018. The pre- and postoperative range of motion of the operated hip were compared. Analysis of postoperative complications, including infection, recurrence, iatrogenic fracture, and neurovascular injury was performed. Results: The mean operative time was 132.78±21.08 minutes, with a mean hemoglobin drop of 3.06±0.82 g/dL within the first postoperative week. The mean duration of postoperative follow-up was 52.08±28.72 months for all patients. Postoperative range of motion showed improvement from preoperative. Flexion and external rotation (mean, 58.89±30.60° and 16.67±18.03°, respectively) showed the greatest gain of motion of the operated hip joint. Postoperative infections resolved in two cases through surgical debridement, and one case required conversion to total hip arthroplasty due to instability. There were no recurrences, iatrogenic fractures, or neurovascular injuries. Conclusion: Resection is a beneficial intervention for restoring the functional range of motion of the hip in order to improve the quality of life for patients with NHO and neurological disorders. We recommend performance of a minimal resection to achieve a targeted functional arc of motion in order to minimize the risk of postoperative complications.

Stricter correction of leg length discrepancy is required during total hip arthroplasty in patients with ankylosing spondylitis.

BACKGROUND: Patients with ankylosing spondylitis often have fusions in the spine and sacroiliac joints, such that it is difficult to compensate for leg length discrepancy (LLD). METHODS: We retrospectively measured the LLD after total hip arthroplasty (THA) in 89 patients with ankylosing spondylitis from June 2004 to February 2021 at our institute. Patients were divided into two groups based on an LLD of 5 mm. Clinical outcomes were investigated using the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and Harris Hip Score (HHS). In addition, these points are investigated: patient satisfaction with the operation; whether there was a current difference in leg length; and whether there was a limping gait. RESULTS: The group with an LLD of 5-10 mm rather than < 5 mm had significantly worse WOMAC pain and stiffness. The survey revealed statistically significant differences in patient satisfaction with the operation, limping gait, and whether back pain had improved. CONCLUSION: For patients with ankylosing spondylitis, reducing the LLD to < 5 mm, which is more accurate than the current standard of < 10 mm, may produce greater improvement in clinical outcomes after hip arthroplasty.

An analysis of the usefulness for using skin adhesive without closed-suction drainage in primary total hip arthroplasty: A retrospective propensity score matched study.

The closed suction surgical drainage system (CSSD) is routinely used after total hip arthroplasty (THA) by orthopedic surgeons in many institutions. However, it has not been shown to decrease the rate of wound infection significantly and may even increase blood loss. This study aimed to evaluate the usefulness of using skin adhesive without CSSD in uncomplicated THA. From July 2015 to September 2017, 200 patients undergoing unilateral THA were enrolled and divided into 2 groups, either receive CSSD (134 patients) or not receive CSSD (66 patients). Then, the propensity matched was performed. Calculated total blood loss, changes in hemoglobin (Hgb) level, transfusions were evaluated. In addition, data on the length of hospital stay, operation time, closure time, time to using crutches following THA were collected. Finally, Harris hip score (HHS), total estimated cost, and complications were assessed. The non-CSSD group had comparatively less blood loss (508.5 ± 280.3 mL compared with 742.1 ± 330.3 mL, P < .001), fewer transfusions (0.03 units compared with 0.3 units, P = .02), less transfusion rate (1.9% compared with 17.3 %, P = .02), lower change of Hgb from immediate postoperative period to 3 days later(1.6 ± 1.0 g/dL compared with 2.0 ± 0.8 g/dL, P = .03), than the CSSD group. There was a longer duration of hospital stay in the CSSD groups (7.2 days compared with 7.8 days, P = .03) The mean total cost in the non-CSSD group was $162.1, which was less than that of the CSSD group, which spent $288.5 on average (P < .001). there was 1 allergic reaction in the non-CSSD group (P = .32). The use of skin adhesive without CSSD could help decrease blood loss, the need for transfusion, and the length of hospital stay, and seems to more cost-effectiveness than using CSSD. It may also provide superior results and allow the patient to recover faster. Using this type of skin adhesive without CSSD is an efficient wound closure method for patients undergoing uncomplicated THA. However, care must be taken for allergic reactions, especially for patients with known or suspected allergies to cyanoacrylate or formaldehyde.

Peptide derived from stromal cell-derived factor 1δ enhances the in vitro expression of osteogenic proteins via bone marrow stromal cell differentiation and promotes bone formation in in vivo models.

Mesenchymal stem cells (MSCs) rely on chemokines and chemokine receptors to execute their biological and physiological functions. Stromal cell-derived factor-1 (SDF-1) is upregulated in injury sites, where it acts as a chemotactic agent, attracting CXCR4-expressing MSCs, which play a pivotal role in the healing and regeneration of tissue throughout the body. Furthermore, SDF-1 expression has been observed in regions experiencing inflammation-induced bone destruction and fracture sites. In this study, we identified a novel peptide called bone-forming peptide-5 (BFP-5), derived from SDF-1δ, which can promote the osteogenesis of MSCs as well as bone formation and healing. Multipotent bone marrow stromal cells treated with BFP-5 showed enhanced alizarin red S staining and higher alkaline phosphatase (ALP) activity. Moreover, ALP and osterix proteins were more abundantly expressed when cells were treated with BFP-5 than SDF-1α. Histology and microcomputed tomography data at 12 weeks demonstrated that both rabbit and goat models transplanted with polycaprolactone (PCL) scaffolds coated with BFP-5 showed significantly greater bone formation than animals transplanted with PCL scaffolds alone. These findings suggest that BFP-5 could be useful in the development of related therapies for conditions associated with bones.

Surgical Excision for Refractory Ischiogluteal Bursitis: A Consecutive Case Series of 21 Patients.

Purpose: A response to conservative treatment is usually obtained in cases of ischiogluteal bursitis. However, the time required to achieve relief of symptoms can vary from days to weeks, and there is a high recurrence rate, thus invasive treatment in addition to conservative treatment can occasionally be effective. Therefore, the aim of this study was to examine surgical excision in cases of refractory ischiogluteal bursitis and to evaluate patients' progression and outcome. Materials and Methods: A review of 21 patients who underwent surgical excision for treatment of ischiogluteal bursitis between February 2009 and July 2020 was conducted. Of these patients, seven patients were male, and 14 patients were female. Injection of steroid and local anesthetic into the ischial bursa was administered at outpatient clinics in all patients, who and they were refractory to conservative treatment, including aspiration and prescription drugs. Therefore, surgery was considered necessary. Excisions were performed by two orthopedic specialists using a direct vertical incision on the ischial area. A review of each patient was performed after excision, and quantification of the outcomes recorded using clinical scoring systems was performed. Results: The results of radiologic evaluation showed that the mean lesion size was 6.2 cm×4.5 cm×3.6 cm. The average disease course after excision was 21.6 days (range, 15-48 days). Measurement of clinical scores, including the visual analog scale and Harris hip scores, was performed during periodic visits, with scores of 0.7 (range, 0-2) and 98.1 (range, 96-100) at one postoperative month, respectively. Conclusion: Surgical excision, with an expectation of favorable results, could be considered for treatment of ischiogluteal bursitis that is refractory to therapeutic injections, aspirations, and medical prescriptions, particularly in moderate-to-severe cases.

Comparison between simultaneous bilateral total hip arthroplasty with and without drainage: A retrospective cohort study.

Simultaneous bilateral total hip arthroplasty (SBTHA) is an effective procedure for patients with disease bilaterally. But there is concern about increased blood loss and complications of SBTHA than staged total hip arthroplasty (THA). This study aimed to evaluate the differences in the clinical outcomes and complication rate of SBTHA with drainage and without drainage for reducing the concerns. Between October 2015 and April 2019, a retrospective cohort study was conducted with modified minimally invasive 2-incision method and a consecutive series of 41 SBTHA performed with drainage (Group I) were compared to 37 SBTHA performed without drainage (Group II). It was assessed clinically and radiographically for a mean of 2.1 ± 0.8 years (range, 1.0-4.8 years). Postoperative hematologic values (Hgb loss, total blood loss, transfusion rate), pain susceptibility, functional outcome (Harris Hip Score, Western Ontario and McMaster Universities Osteoarthritis Index score) and complication were compared in the drained group and the non-drained group. Postoperative Hgb loss (I: 2163.2 ± 698.7 g, II: 1730.4 ± 572.5 g; P = .002), total blood loss (I: 1528.8 ± 421.7 mL, II: 1237.6 ± 325.9 mL; P = .001) and mean transfusion unit (I: 0.7 ± 1.0 IU, II: 0.1 ± 0.3 IU; P < .001) were significantly lower in the without drainage group than in the with drainage group. But the morphine equivalent (I: 132.7 ± 314.1 mg, II: 732.2 ± 591.5 mg; P < .001) was significantly larger in the without drainage group. No significant difference was found between the drainage group and without drainage group in Harris Hip Score and Western Ontario and McMaster Universities Osteoarthritis Index score at final follow-up. SBTHA without drainage can reduce postoperative blood loss and the requirement for transfusion without increasing other complication. But SBTHA without drainage is more painful method than SBTHA with drainage. Therefore, SBTHA without drainage will be a good option to reduce the burden on the patient by reducing postoperative bleeding if it can control pain well after surgery. III, Retrospective case-control study.

Subscapularis-sparing deltopectoral approach in reverse total shoulder arthroplasty.

PURPOSE: This study compared the clinical and radiologic results of reverse shoulder arthroplasty (RSA) using either the subscapularis-sparing deltopectoral approach (SSDA) or traditional deltopectoral approach (TDA) in cuff tear arthropathy patients. MATERIALS AND METHOD: We retrospectively evaluated 71 patients who underwent RSA for cuff tear arthropathy between July 2014 and December 2018. Patients were divided into two groups according to the surgical approach: TDA (34 cases) and SSDA (37 cases). The mean patient age was 78.6 years, and the mean (range) follow-up period was 23.5 (12-48) months. Clinical results were assessed using the Visual Analogue pain Scale (VAS), American Shoulder and Elbow Surgeon score (ASES), Korean Shoulder Scoring System (KSS), and Constant score. Radiographic indicators prosthesis-scapular neck angle (PSNA), peg-glenoid rim distance (PGRD), inferior overhang, acromion-greater tuberosity (AT) distance, and glenoid-greater tuberosity (GT) distance) were assessed, and notching severity was assessed according to the Nerot-Sirveaux classification. RESULTS: The radiographic indicator results of the TDA and SSDA groups were as follows: PSNA (131.4° ± 17.2°, 136.1° ± 7.7°), PGRD (18.7 mm ± 2.9 mm, 21.4 mm ± 2.0 mm), AT distance (38.3 mm ±6.9 mm, 37.5 mm ± 6.8 mm), GT distance (51.6 mm ± 6.3 mm, 51.4 mm ± 5.3 mm), and inferior overhang (4.4 mm ± 2.2 mm, 2.9 mm ± 1.3 mm). PGRD and inferior overhang showed statistically significant differences between groups, but the clinical results showed no significant differences. There were no complications such as neurovascular injury, implant loosening, surgical site infection, or acromion fracture in either group. CONCLUSION: SSDA for RSA showed no significant differences in clinical and radiological results compared with TDA. Therefore, SSDA is a viable alternative for RSA in cuff tear arthropathy.

Bone-Forming Peptide-4 Induces Osteogenic Differentiation and VEGF Expression on Multipotent Bone Marrow Stromal Cells.

Bone morphogenetic proteins (BMPs) have been widely used as treatment for bone repair. However, clinical trials on fracture repair have challenged the effectiveness of BMPs and suggested that delivery of multipotent bone marrow stromal cells (BMSCs) might be beneficial. During bone remodeling and bone fracture repair, multipotent BMSCs differentiate into osteoblasts or chondrocytes to stimulate bone formation and regeneration. Stem cell-based therapies provide a promising approach for bone formation. Extensive research has attempted to develop adjuvants as specific stimulators of bone formation for therapeutic use in patients with bone resorption. We previously reported for the first time bone-forming peptides (BFPs) that induce osteogenesis and bone formation. BFPs are also a promising osteogenic factor for prompting bone regeneration and formation. Thus, the aim of the present study was to investigate the underlying mechanism of a new BFP-4 (FFKATEVHFRSIRST) in osteogenic differentiation and bone formation. This study reports that BFP-4 induces stronger osteogenic differentiation of BMSCs than BMP-7. BFP-4 also induces ALP activity, calcium concentration, and osteogenic factors (Runx2 and osteocalcin) in a dose dependent manner in BMSCs. Therefore, these results indicate that BFP-4 can induce osteogenic differentiation and bone formation. Thus, treatment of multipotent BMSCs with BFP-4 enhanced osteoblastic differentiation and displayed greater bone-forming ability than BMP-7 treatment. These results suggest that BFP-4-stimulated cell therapy may be an efficient and cost-effective complement to BMP-7-based clinical therapy for bone regeneration and formation.

Patient-specific Three-dimensional Bone Model for the Diagnosis and Treatment of Orthopedic Diseases of the Hip: Opinions of Orthopedic Surgeons on New Medical Technology.

PURPOSE: To examine the perceptions and opinions of orthopedic surgeons on new medical technology for patient-specific three-dimensional (3D) bone models in the diagnosis and treatment of orthopedic diseases related to the hip joint. MATERIALS AND METHODS: A total of 75 doctors who were trained in orthopedic surgery or were current residents in the Republic of Korea were surveyed via questionnaires. Eight questions were included regarding the utility and current issues in the diagnosis and treatment of orthopedic disease using a customized 3D bone model made from s patient's computed tomography (CT) image. In addition to the questionnaire, the simple plain radiography and 3D CT image of the patient and 3D printed models of two actual patients were presented for comparison. RESULTS: An average of 92.7% of the orthopedic surgeons answered "very much" or "yes" to questions regarding the effectiveness of diagnosis, treatment, education, and simulation of surgery using the patient-specific 3D bone model. To the question, "Do you think you must have medical insurance to provide better medical services by using a new patient-specific 3D bone model medical technology for simulated surgery?" 93.3% of orthopedic surgeons answered either "very much" or "yes". CONCLUSION: Patient-specific 3D bone models of new medical technology can provide breakthrough support in the diagnosis, treatment, and education of orthopedic diseases in the field of hip joints. Therefore, it seems that efforts should be made to change governmental policy for coverage of patient-specific 3D bone modeling.

Long-term outcomes of cementless femoral stem revision with the Wagner cone prosthesis.

BACKGROUND: The procedure of femoral stem revision is challenging, and bone conservation with less stress shielding is a mandatory effort in these cases. Although there are several reports of stem revision with stems designed for primary total hip arthroplasty (THA), there is no report on stem revision with the Wagner cone prosthesis. METHODS: Between 1996 and 2008, 41 hips of 41 consecutive patients were subjected to femoral revision THA using the Wagner cone prosthesis. The mean age during revision surgery was 56.1 years, and the mean follow-up period was 14.8 years. The clinical results were evaluated, and the femoral component was assessed radiologically. RESULTS: The results showed that the average period from the first operation to revision THA was 8.0 years. Additionally, the mean Harris hip score improved from 52 points preoperatively to 83 points at the final follow-up. All stems showed bone integration in the radiological evaluation. A subsidence of more than 5 mm was observed in 3 out of 28 (10.7%) femoral stems. Two patients needed an acetabular revision for acetabular cup loosening during the follow-up period. Furthermore, one patient had recurrent dislocation and had to undergo revision surgery for soft tissue augmentation. CONCLUSIONS: We achieved favorable clinical and radiological long-term outcomes in femoral stem revision using the Wagner cone prosthesis. This cementless femoral stem could be an option for femoral stem revision in cases with relatively good bone stock.

Cementless total hip arthroplasty for failed treatment of subtrochanteric fracture.

BACKGROUND: Failed treatment of subtrochanteric fractures commonly leads to pain, limping, and poor limb function. Cementless total hip arthroplasty (THA) could serve as an efficient salvage procedure in such cases. This study aimed to evaluate the outcomes and complications of salvage THA in failed subtrochanteric fracture fixation cases. METHODS: From January 2001 to December 2017, cementless THA for failed treatment of subtrochanteric fractures was performed in 18 hips of 11 men and 7 women (average age, 74 years; age range, 57.0-89.0 years). Patients were followed up for clinical and radiological assessments in terms of implant survival and complications after a minimum follow-up of 2 years. The Wagner femoral stems (Zimmer, Warsaw, USA) were used in all 18 patients (100%), with the long-length stem (Wagner SL stem) and standard-length stem (Wagner cone stem) used in 11 and 7 patients, respectively. RESULTS: The mean follow-up period was 5.2 years (range: 2.2-10.8 years). The mean Harris hip score (HHS) was 38.2 (range: 24-56) preoperatively and 85.4 (range: 79-92) at the last follow-up. The mean postoperative limb length discrepancy was 6.4 mm (range: 4-9 mm). Only one patient underwent revision due to bone in-growth failure of the femoral stem. One patient had an episode of postoperative dislocation and was treated with closed reduction without reoccurrence. Delayed union of the fracture site occurred in one patient. Patients who were previously treated with an intramedullary nail had a significantly shorter surgical duration, lesser intraoperative blood loss, and fewer blood transfusions than those who were previously treated with plate and screws. Kaplan-Meier survival rate with an endpoint of revision was 94.4% (95% confidence interval 72.7-99.9) at 5 years. CONCLUSION: Our results indicate that cementless THA is a beneficial and effective procedure for salvaging the failed treatment of subtrochanteric fractures. The Wagner conical prosthesis has shown satisfactory function outcomes, stable fixation, and survival rate for these complex situations. However, attention should be paid to increased operation time, blood loss, and complications when performing THA for subtrochanteric fractures with failed fixation devices especially, plates and screws.

Minimum 15-year results of metasul 28-mm metal-on-metal total hip arthroplasty in patients younger than 50 years of age.

BACKGROUND: Some propitious mid- and long-term studies had been reported for MoM bearings; however, most studies have addressed specific patient groups rather than younger, active patients, who probably represent the most suitable population for investigations on wear and osteolysis. The purpose of this study to evaluate the long-term results of second-generation metal-on-metal cementless total hip arthroplasty (THA) in patients aged <50 years. METHODS: From December 1997 to January 2004, primary THA using a metal-on-metal bearing cementless implant was performed in 63 patients (72 hips) aged <50 years. The mean follow-up duration was 18.6 (range, 15.9-22.1) years, and the mean age at initial operation was 39 (range, 22-49) years. Clinical results, complications, survivorship, osteolysis, and aseptic loosening were evaluated. RESULTS: The mean Harris hip score and Western Ontario and McMaster Universities Arthritis Index scores were improved from 57.8 (range, 28-69) points and 73.4 (range, 63-94) points preoperatively to 91.7 (range, 80-100) points and 25.5 points (range, 17-38) points, respectively, at the last follow-up. Osteolysis lesions were found in 12 hips (acetabulum, 6 and femur, 6). The notching occurred on the femoral stem neck occurred in 12 hips. The mean serum cobalt and chromium concentrations were 2.3 (range, 0.2-10.6) µg/L and 1.7 (range, 0.4-8.1) µg/L, respectively, at a mean follow-up of 12.7 years in 32 patients (50.1%). The Kaplan-Meier survivorship curve analysis with revision for any reason as the endpoint revealed that 93.1% survived at 18.6 years' follow-up. CONCLUSIONS: Second-generation metal-on-metal cementless THA was found to produce satisfactory clinical and radiographic results with a low revision rate for osteolysis and aseptic loosening in patients aged less than 50 years.

Mid-term results of total hip arthroplasty with modified trochanteric osteotomy in Crowe type IV developmental dysplasia of the hip.

BACKGROUND: This study aimed to explore mid-term clinical results of cementless total hip arthroplasty (THA) with modified trochanteric osteotomy in Crowe type IV developmental dysplasia of the hip (DDH). METHODS: Thirteen patients (13 hips) with Crowe type IV DDH who underwent THA with modified trochanteric osteotomy between May 2013 and October 2015 were retrospectively analyzed. The mean follow-up duration was 5.2 years (range, 4.9-6.1 years). RESULTS: The mean Harris Hip Score (HHS) significantly (p < 0.05) improved from 30.7 (range, 22-38) to 87.5 (range, 83-93). The mean leg length discrepancy (LLD) was 53.4 mm (range, 42.1-68.5 mm) preoperatively. The final LLD was 5.6 mm (range, 2.4-9.1 mm; p < 0.05). The mean leg length after surgery was 47.4 mm (range, 33.6-67.2 mm) and the femur shortening distance was 43.8 mm (range, 31.2-53.4 mm). The average duration of bone union for the greater trochanter (GT) was 2.5 months (range, 1.5-3.6 months). There was no infection, GT non-union, or loosening (septic or aseptic) of the stem or cup in any case. CONCLUSIONS: THA with modified trochanteric osteotomy with a cementless cup is an effective treatment for Crowe type IV DDH. It can rebuild complex biomechanics and biology of hip dysplasia without increasing complications.

Survival Analysis of Total Hip Arthroplasty for High Hip Dislocation Secondary to Developmental Dysplasia or Septic Arthritis of the Hip.

BACKGROUND: This retrospective study was conducted to know clinical and radiographic outcomes, complication rate, and survival of THA in patients with high hip dislocation secondary to developmental dysplasia(DDH) or septic arthritis of the hip(SSH). METHODS: Between March 2005 and September 2014, there were consecutive series of 53 THAs in patients with a highly dislocated hip secondary to DDH or SSH. Of these, 48 hips (DDH 24 and SSH 24) were reviewed at a mean follow-up of 7.9 years(range, 5.0-14.3 years). The mean age at the time of THA was 39.1 years(range, 18.0-59.0 years). RESULTS: Intraoperative blood loss, total drainage and blood transfusion amounts, and mean time to greater trochanter union were significantly lower in the DDH group than in the SSH group (P = .001, P = .039 and P = .014, and P = .015, respectively). No significant difference in Kaplan-Meier survivorship was observed between groups (log-rank, P = .343). The survival rates with an endpoint of cup aseptic loosening in cases with a cemented cup at 7.9 and 10 years (68.1% and 60.5%, respectively) were significantly lower than those in cementless cup cases (100%) at the same checkpoints (P = .019).. CONCLUSION: We found similar clinical outcomes between the DDH and SSH groups. However, due to poor bone quality and a lack of containment, cementless acetabular cups could not be performed in more than 50% of patients. Our experience shows that revision cementless fixation cup was possible due to reconstitution of the acetabulum in cases with failed cemented fixation.

The results of screw augmentation of acetabular cement spacers for the treatment of periprosthetic hip joint infection.

INTRODUCTION: Prosthesis of antibiotic-loaded acrylic cement (PROSTALAC) is widely used in two-stage revision arthroplasty in periprosthetic joint infection (PJI) after total hip arthroplasty (THA). In our institution, we encountered several cases of acetabular cement spacer dislodgement. The aim of this study was to compare the results of two-stage revision arthroplasties with antibiotic-loaded cement spacers with or without screws on the acetabulum for PJI. PATIENTS AND METHODS: This retrospective study included 44 patients who underwent a two-stage revision THA for PJI from June 2007 to May 2017. We divided the patients into two groups: group 1 consisted of 21 patients (21 hips) who underwent two-stage revision arthroplasty with screw augmentation, while group 2 consisted of 23 patients (23 hips) who underwent the same surgery without screw augmentation at the acetabular cement spacer. We compared the migration and dislodgement of the acetabular cement spacer between the two groups. RESULTS: Before the second-stage surgery, there was less vertical migration of the cement spacer in group 1 compared to group 2 (1.2 mm vs 3.1 mm, p < 0.001). There was also less medial migration of the cement spacer in group 1 (0.6 mm vs 1.6 mm, p = 0.001). After the first stage, the mean Harris Hip score was significantly higher in group 1 than in group 2 (75 vs 65, p = 0.033). Cement spacer rotation or total movement out of the acetabular area occurred in six patients, all in group 2. After first stage reinfection occurred in two patients, one in each group. CONCLUSIONS: Screw augmentation to the acetabulum in the first-stage surgery provides better stability of acetabular antibiotic cement spacers without increasing reinfection rate.

Sequential Bilateral Hip Fractures in Elderly Patients.

PURPOSE: To evaluate the incidence and presentation of osteoporotic sequential bilateral hip fractures (SBHF) in Center for Joint Disease, Chonnam National University Hwasun Hospital as there are limited studies with variable results reported in Korea. MATERIALS AND METHODS: Records of 507 patients aged >60 years old presenting with osteoporotic hip fractures between 2009 and 2015 were retrospectively reviewed to document the occurrence and presentation of sequential hip fractures; mean post-treatment follow-up was 48 months. Additionally, any correlations between sequential fractures and initial fracture and risk factors were assessed. Bone mineral density (BMD) was measured before and after sequential hip fracture for comparison. RESULTS: There were 246 femoral neck (Group A) and 261 intertrochanteric (Group B) fractures. The cumulative incidence of SBHF was 8.2% (42 patients total; 29 in Group A and 13 in Group B). Average interval of SBHF for Group A and Group B were 37.4 months and 29.9 months, respectively. There was significant correlation between the initial fracture type and sequential fractures, particularly the trochanteric and subgroup of those with neck fractures. Hypertension as a co-morbidity and female sex have been identified as risk factors for SBHF. No significant findings were noted regarding BMD and risk factors in both groups. CONCLUSION: The clinical presentations of SBHF noted here concur with other worldwide studies and may guide efforts to develop relevant programs to prevent SBHF.

Bilateral septic arthritis of the hip caused by nontyphoidal salmonella: A case report.

Nontyphoidal salmonella (NTS) infection can lead to gastroenteritis, enteric fever, and bacteremia. However, osteoarticular infections caused by NTS are rarely encountered. We report the case of a 53-year-old male patient with bilateral hip infection caused by NTS. We performed a two-stage reconstruction comprising debridement of both hip joints followed by prosthetic replacement with antibiotic-loaded acrylic cement because the patient's diagnosis was delayed for approximately three months and the hip joints were already damaged. At two-year follow-up, the clinical, radiologic, and laboratory findings were within the normal limits, and there was no sign of infection. This case is presented because reports of bilateral hip joint infection due to NTS are rare. Early detection and proper treatment are essential for the eradication of the infection. The use of a prosthesis made of antibiotic-loaded acrylic cement and prolonged antimicrobial therapy can be considered in the management of bilateral hip joint destruction due to delayed diagnosis of NTS infection.

Three-dimensional-printing Technology in Hip and Pelvic Surgery: Current Landscape.

The use of three-dimensional (3D) printing is becoming more common, including in the field of orthopaedic surgery. There are currently four primary clinical applications for 3D-printing in hip and pelvic surgeries: (i) 3D-printed anatomical models for planning and surgery simulation, (ii) patient-specific instruments (PSI), (iii) generation of prostheses with 3D-additive manufacturing, and (iv) custom 3D-printed prostheses. Simulation surgery using a 3D-printed bone model allows surgeons to develop better surgical approaches, test the feasibility of procedures and determine optimal location and size for a prosthesis. PSI will help inform accurate bone cuts and prosthesis placement during surgery. Using 3D-additive manufacturing, especially with a trabecular pattern, is possible to produce a prosthesis mechanically stable and biocompatible prosthesis capable of promoting osseointergration. Custom implants are useful in patients with massive acetabular bone loss or periacetabular malignant bone tumors as they may improve the fit between implants and patient-specific anatomy. 3D-printing technology can improve surgical efficiency, shorten operation times and reduce exposure to radiation. This technology also offers new potential for treating complex hip joint diseases. Orthopaedic surgeons should develop guidelines to outline the most effective uses of 3D-printing technology to maximize patient benefits.