Effect of Chitosan on Synovial Membrane Derived Cells and Anterior Cruciate Ligament Fibroblasts.

Previously, chitosan reduces the senescence-related phenotypes in human foreskin fibroblasts through the transforming growth factor beta (TGF-ß) pathway, and enhances the proliferation and migration capabilities of these cells are demonstrated. In this study, we examined whether the senescence-delaying effect of chitosan could be applied to primary knee-related fibroblasts, such as human synovial membrane derived cells (SCs) and anterior cruciate ligament fibroblasts (ACLs). These two types of cells were obtained from donors who needed ACL reconstruction or knee replacement. We found that chitosan treatment effectively reduced aging-associated ß-galactosidase (SA-ß-gal)-positive cells, downregulated the expression of senescence-related proteins pRB and p53, and enhanced the 5-bromo-2'-deoxyuridine (BrdU) incorporation ability of SCs and ACLs. Moreover, chitosan could make SCs secret more glycosaminoglycans (GAGs) and produce type I collagen. The ability of ACLs to close the wound was also enhanced, and the TGF-ß and alpha smooth muscle actin (αSMA) protein expression decreased after chitosan treatment. In summary, chitosan not only delayed the senescence but also enhanced the functions of SCs and ACLs, which is beneficial to the application of chitosan in cell expansion in vitro and cell therapy.

Corrigendum: Safety assessment of poly-ε-caprolactone in the treatment of primary spontaneous pneumothorax.

[This corrects the article DOI: 10.3389/fsurg.2024.1335144.].

Safety assessment of poly-ε-caprolactone in the treatment of primary spontaneous pneumothorax.

Background/purpose: Biomaterial-based implants are gaining traction as an option for pleurodesis treatment, yet the search for the best biomaterial or the most suitable shape to handle spontaneous pneumothorax continues. This forward-looking research assessed the use of a poly-ε-caprolactone membrane for its safety when applied as a sclerosant in pleurodesis procedures in human patients. Methods: From July 2017 to February 2018, we conducted a Phase I trial in which 10 patients with primary spontaneous pneumothorax were treated using video-assisted thoracoscopic surgery with a poly-ε-caprolactone membrane. These procedures encompassed bleb resection and mechanical pleurodesis through parietal pleura scrubbing. After resection, a 150 × 150 mm poly-ε-caprolactone membrane was applied to the apex. The primary outcome measures were the adverse events and laboratory outcomes. Results: After surgery, we observed no cardiopulmonary-related adverse events or indications of systemic inflammation. Furthermore, no episodes of hypothermia or hyperthermia occurred. Chest radiographs showed no evident pneumonitis or effusion associated with tissue reactions. The average follow-up duration was 31.7 ± 17.7 months, during which two patients exhibited recurrence. Conclusion: This study is the first to show the biocompatibility of poly-ε-caprolactone in humans, suggesting its potential as a treatment option for patients with primary spontaneous pneumothorax. Despite the relatively small number of patients, we maintain confidence in the reliability and safety profile of the PCL membrane, bolstered by its previously established efficacy in applications involving other organs. Phase II and phase III clinical studies are needed to support these observations.

Mechanical and biological properties of poly-ε-caprolactone membrane for pleurodesis: A preclinical study in pigs.

BACKGROUND/PURPOSE: Biomaterial implants are emerging as a treatment choice for pleurodesis; however, the optimal biomaterial and form for managing spontaneous pneumothorax, particularly post-video-assisted thoracic surgery, remain under investigation. This study evaluated the mechanical and biological properties of the poly-ε-caprolactone (PCL) membrane as a sclerosing agent for pleurodesis in Landrace pigs. METHODS: Twenty-four Landrace pigs were split into two groups for mechanical abrasion and PCL membrane pleurodesis, with the latter group's PCL meshes inserted using video-assisted thoracic surgery. The mechanical and biological properties of the PCL membrane were assessed in pigs at three, six, and 12 months after the procedure. This assessment involved a range of techniques, such as the T-Peel test, macroscopic evaluation with a scoring scale, microscopic examination, and biomechanical and molecular weight analysis. RESULTS: The PCL membrane group outperformed the traditional abrasion group, with stronger adhesions seen over longer implantation durations. This group also showed superior and more consistent results in both macroscopic and microscopic evaluations compared to the control group. The membrane-based method was easier and faster to perform than the control group's method, and importantly, no mortality occurred following membrane implantation. CONCLUSION: This study is the pioneering effort to present long-term findings regarding the mechanical and biological properties of the PCL membrane in an in vivo animal model. The membrane demonstrated better adhesion ability than that of traditional abrasion and showed reassuring biocompatibility in both the pig model, suggesting its potential as treatment for patients with primary spontaneous pneumothorax. Further clinical studies are needed to support these observations.

Gelatin-Based Hydrogel for Three-Dimensional Neuron Culture Application.

Gelatin is a biocompatible biomaterial composed of a variety of amino acids that provides a possibility to regulate the interaction between cationic amino acids and neural cells. Based on our first finding that the neuron viability was improved as the lysine on the gelatin was converted into a guanidine structure, a three-dimensional (3D) gelatin hydrogel composed of gelatin and poly(allylguanidine) (PAG) was prepared to investigate neural cell behaviors. As expected, improved neuron viability, neurite outgrowth, synaptogenesis, and inhibited glial cell growth were simultaneously observed in the gelatin cross-linked with the PAG hydrogel (G-PAG) but not in the gelatin hydrogel cross-linked with poly-d-lysine (PDL) or polyethylenimine (PEI). In addition, in vivo tests also illustrated that G-PAG could provide an environment for neural culture, with improving neuron viability and neurite outgrowth. Several hydrogel characteristics-including the swelling ratio, mechanical strength, and electric property-that theoretically can influence neural cell response showed no significant difference among them. Therefore, the guanidine structure of PAG was proposed to determine the behaviors of neural cells within the gelatin-polycation hydrogels, and we proposed that the neural cell behavior is regulated by a specific gelatin-neuron relationship. The information found in this study provides a concept to design and modify gelatin-based hydrogels for neural tissue engineering applications.

IL-6 induces periostin production in human ACL remnants: a possible mechanism causing post-traumatic osteoarthritis.

OBJECTIVE: Perostin (POSTN) and IL-6 consistently elevated after ACL injury, and ACL has been proposed as the major source of POSTN. However, there is a lack of evidence whether IL-6 induces ACL remnants to produce POSTN. This study aimed to investigate the effect of IL-6 on POSTN production in ACL fibroblasts, which may help us understand more about the mechanism of PTOA after ACL injury and ACL reconstruction. METHODS: ACL remnants were harvested from 27 patients undergoing ACL reconstruction. Quantitative real-time polymerase chain reaction (PCR) was performed to examine the POSTN gene expression of ACL fibroblasts after treatment of different concentrations of IL-6. The POSTN protein production of ACL fibroblasts was determined using western blot analysis. The blockers of possible signaling pathways, including PI3K/Akt, Ras/MAPK, and JAK/STAT pathways, were added to test whether the effect of IL-6 on ACL fibroblast could be attenuated. ACL fibroblast and chondrocyte co-culture was carried out to determine the influence of ACL and IL-6 on chondrocytes. RESULTS: Quantitative real-time PCR showed that IL-6 time-dependently and dose-dependently increased POSTN gene expression of ACL fibroblast. Western blot analysis also revealed that IL-6 dose-dependently induced POSTN protein production. Regarding the chronicity of ACL injury, the POSTN protein production was comparable between ACL remnants which were derived within 3 months of injury and at least 6 months after injury. PI3K/Akt blockers could attenuate the effect of IL-6 on ACL remnants, whereas Ras/MAPK and JAK/STAT did not decrease POSTN production. The coexistence of ACL and IL-6 induced more MMP-13 and ADAMTS-4 by chondrocytes. CONCLUSIONS: IL-6 induced ACL remnants to produce POSTN. This effect could be attenuated by the PI3K/Akt blocker. Coexistence of IL-6 and ACL remnants may accelerate post-traumatic arthritis.

The cellular responses of corneal fibroblasts to cyclic stretching loads.

Mechanical signaling plays a crucial role in maintaining extracellular matrix (ECM) homeostasis in various structures. In this study, we investigated the responses of corneal fibroblasts to cyclic stretching loads using an in vitro cell culture system. Bovine corneal fibroblasts were cultured and subjected to equibiaxial cyclic strain of 15% for 72 h at a frequency of 0.25 Hz, with bovine skin fibroblasts used as a comparison. We explored various cellular behaviors, including morphological changes, cell proliferation, and metabolism in response to mechanical stretching loads. The expression of genes, protein secretion, and enzymatic activity for several major metalloproteinases was also determined through Q-PCR, Western blot, and gel zymography. Additionally, we investigated the involvement of mitogen-activated protein kinases (MAPKs) signaling pathways in the corneal fibroblasts when subjected to mechanical stimuli. Our findings revealed that, compared to skin fibroblasts, corneal fibroblasts were reluctant to morphological changes in response to a prolonged (72 h) and high-amplitude (15% of strain) cyclic stretching load. However, cyclic stretching loads stimulated the upregulation of MMP-2 expression in corneal fibroblasts via the MAPK signaling pathways involving extracellular signal-regulated kinase and p38. Together with a lack of upregulation in type I collagen expression, our results indicate the induction of the ECM degradation process in corneal fibroblasts in response to cyclic stretching. These findings emphasize the mechanoresponsive nature of corneal fibroblasts and shed light on the potential impact of intense mechanical stress on the cornea in both normal and pathological conditions such as keratoconus, providing valuable insights for understanding corneal mechanobiology.

Low-glucose culture environment can enhance the wound healing capability of diabetic adipose-derived stem cells.

BACKGROUND: Application of autologous adipose-derived stem cells (ASC) for diabetic chronic wounds has become an emerging treatment option. However, ASCs from diabetic individuals showed impaired cell function and suboptimal wound healing effects. We proposed that adopting a low-glucose level in the culture medium for diabetic ASCs may restore their pro-healing capabilities. METHODS: ASCs from diabetic humans and mice were retrieved and cultured in high-glucose (HG, 4.5 g/L) or low-glucose (LG, 1.0 g/L) conditions. Cell characteristics and functions were investigated in vitro. Moreover, we applied diabetic murine ASCs cultured in HG or LG condition to a wound healing model in diabetic mice to compare their healing capabilities in vivo. RESULTS: Human ASCs exhibited decreased cell proliferation and migration with enhanced senescence when cultured in HG condition in vitro. Similar findings were noted in ASCs derived from diabetic mice. The inferior cellular functions could be partially recovered when they were cultured in LG condition. In the animal study, wounds healed faster when treated with HG- or LG-cultured diabetic ASCs relative to the control group. Moreover, higher collagen density, more angiogenesis and cellular retention of applied ASCs were found in wound tissues treated with diabetic ASCs cultured in LG condition. CONCLUSIONS: In line with the literature, our study showed that a diabetic milieu exerts an adverse effect on ASCs. Adopting LG culture condition is a simple and effective approach to enhance the wound healing capabilities of diabetic ASCs, which is valuable for the clinical application of autologous ASCs from diabetic patients.

Intratumoral thermo-chemotherapeutic alginate hydrogel containing doxorubicin loaded PLGA nanoparticle and heating agent.

Chemotherapy has been widely used to treat cancer; however, the non-specific systemic toxicity of chemotherapeutic agents has always been an issue. Local injection treatment is a strategy used to reduce the undesired adverse effects of chemotherapeutic drugs. In addition, chemotherapeutic agents combined with thermotherapy are effective in further enhancing therapeutic potency. In the present study, we prepared an injectable hydrogel, namely, doxorubicin (DOX)-loaded poly (lactic-co-glycolic acid) (PLGA) nanoparticle (DPN) and magnetite nanoparticle (MNP) embedded in alginate hydrogel (DPN/MNP-HG), where DPN and MNP were the chemotherapeutic and heating agents, respectively, for intratumoral thermo-chemotherapy. Injectable DPN/MNP-HG, which possesses solid-like elastic properties, was conveniently prepared via ionic cross-linking at room-temperature. When exposed to an alternating magnetic field (AMF), DPN/MNP-HG exhibited controllable heat generation with a reversible temperature-rise profile. Regarding the kinetics of DOX release, both with and without AMF, DPN/MNP-HG exhibited a slow initial burst and sustained release profile. In cytotoxicity studies and subcutaneous mouse cancer models, successful thermo-chemotherapy with DPN/MNP-HG resulted in significantly lower cell viability and increased tumor-growth suppression; mice also exhibited good tolerance to injected DPN/MNP-HG both with(+) and without AMF application. In conclusion, the proposed thermo-chemotherapeutic DPN/MNP-HG for local intratumoral injection is a promising formulation for cancer treatment.

Effects of Chitosan on Chondrocytes Derived from Human Nasal Septal Cartilage.

BACKGROUND/AIM: The aim of this study was to evaluate the influence of chitosan on the growth of nasal septal chondrocytes (NSCs). The final goal was to establish a novel methodology to enhance nasal septal cartilage regeneration. MATERIALS AND METHODS: Human NSCs were isolated and their morphology was examined using Alcian blue staining and observed by light microscopy. The isolated NSCs were grown with various concentrations of chitosan and the expression of COL2A1 was investigated. RESULTS: NSCs were successfully isolated from nasal septal cartilage. Co-culture with 0.2% of chitosan greatly enhanced proliferation of NSCs compared to control cells. However, 0.5% of chitosan was harmful to NSCs, resulting in cell detachment from the culture plate. Furthermore, the addition of 0.2% chitosan significantly improved the expression of COL2A1 in NSCs. CONCLUSION: To our knowledge, this is the first report to demonstrate that chitosan could effectively guide the attachment and growth of human NSCs. Chitosan appears to be a promising additive for NSC culture, which sets the stage for studying tissue regeneration in nasal septal cartilage deficiency, rhinoplasty, and craniofacial reconstruction.

Single-shot quantitative phase contrast imaging based on deep learning.

Quantitative differential phase-contrast (DPC) imaging is one of the commonly used methods for phase retrieval. However, quantitative DPC imaging requires several pairwise intensity measurements, which makes it difficult to monitor living cells in real-time. In this study, we present a single-shot quantitative DPC imaging method based on the combination of deep learning (DL) and color-encoded illumination. Our goal is to train a model that can generate an isotropic quantitative phase image (i.e., target) directly from a single-shot intensity measurement (i.e., input). The target phase image was reconstructed using a linear-gradient pupil with two-axis measurements, and the model input was the measured color intensities obtained from a radially asymmetric color-encoded illumination pattern. The DL-based model was trained, validated, and tested using thirteen different cell lines. The total number of training, validation, and testing images was 264 (10 cells), 10 (1 cell), and 40 (2 cells), respectively. Our results show that the DL-based phase images are visually similar to the ground-truth phase images and have a high structural similarity index (>0.98). Moreover, the phase difference between the ground-truth and DL-based phase images was smaller than 13%. Our study shows the feasibility of using DL to generate quantitative phase imaging from a single-shot intensity measurement.

Brain-derived neurotrophic factor contributes to neurogenesis after intracerebral hemorrhage: a rodent model and human study.

Background and purpose: Intracerebral hemorrhage (ICH) enhances neurogenesis in the subventricular zone (SVZ); however, the mechanism is not fully understood. We investigated the role of brain-derived neurotrophic factor (BDNF) in post-ICH neurogenesis in a rodent model and in patients with ICH using cerebrospinal fluid (CSF). Methods: A rat model of ICH was constructed via stereotaxic injection of collagenase into the left striatum. Patients with ICH receiving an external ventricular drain were prospectively enrolled. CSF was collected from rats and patients at different post-ICH times. Primary cultured rat neural stem cells (NSCs) were treated with CSF with or without BDNF-neutralized antibody. Immunohistochemistry and immunocytochemistry were used to detect NSC proliferation and differentiation. The BDNF concentration in CSF was quantified using enzyme-linked immunosorbent assays (ELISA). Results: In the rat model of ICH, the percentage of proliferating NSCs and neuroblasts in SVZ was elevated in bilateral hemispheres. The cultured rat NSCs treated with CSF from both rats and patients showed an increased capacity for proliferation and differentiation toward neuroblasts. BDNF concentration was higher in CSF collected from rats and patients with ICH than in controls. Blocking BDNF decreased the above-noted promotion of proliferation and differentiation of cultured NSCs by CSF treatment. In patients with ICH, the BDNF concentration in CSF and the neurogenesis-promoting capacity of post-ICH CSF correlated positively with ICH volume. Conclusion: BDNF in CSF contributes to post-ICH neurogenesis, including NSC proliferation and differentiation toward neuroblasts in a rat model and patients with ICH.

Timely surgical fixation confers beneficial outcomes in patients' concomitant flail chest with mild-to-moderate traumatic brain injury: a trauma quality improvement project analysis - a cohort study.

BACKGROUND: Traumatic flail chest results in respiratory distress and prolonged hospital stay. Timely surgical fixation of the flail chest reduces respiratory complications, decreases ventilator dependence, and shortens hospital stays. Concomitant head injury is not unusual in these patients and can postpone surgical timing due to the need to monitor the status of intracranial injuries. Reducing pulmonary sequelae also assists in the recovery from traumatic brain injury and improves outcomes. No previous evidence supports that early rib fixation can improve the outcome of patients with concomitant flail chest and traumatic brain injury. RESEARCH QUESTION: Can early rib fixation improve the outcome of patients with concomitant flail chest and traumatic brain injury? STUDY DESIGN AND METHODS: Adult patients with blunt injuries from the Trauma Quality Improvement Project between 2017 and 2019 were eligible for inclusion. Patients were divided into two treatment groups: operative and nonoperative. Inverse probability treatment weighting was used to identify the predictors of mortality and adverse hospital events. RESULTS: Patients in the operative group had a higher intubation rate [odds ratio (OR), 2.336; 95% CI, 1.644-3.318; p <0.001), a longer length of stay (coefficient ß , 4.664; SE, 0.789; p <0.001), longer ventilator days (coefficient ß , 2.020; SE, 0.528; p <0.001), and lower mortality rate (OR], 0.247; 95% CI, 0.135-0.454; p <0.001). INTERPRETATION: Timely rib fixation can improve the mortality rate of patients with flail chest and a concomitant mild-to-moderate head injury.

pH-driven continuous stem cell production with enhanced regenerative capacity from polyamide/chitosan surfaces.

Adipose-derived stem cells (ASCs) have raised significant interest for their potential therapeutic applications in regenerative medicine. However, ASCs usually suffer from decreased pluripotency and functional plasticity during in vitro expansion. Herein, this study sought to develop a continuous cell production system that can mass-produce ASCs with sustained regenerative capacity. The strategy was blending pH-responsive chitosan (CS) with polyamide-66 (PA) to generate combined surface properties with controllable cell growth/detachment ability to achieve a repeated cell production process. From the collected data, all the polymer blends were capable of completing a minimum of four consecutive production cycles, wherein the PA17CS blend (PA:CS = 1:7) outperformed with respect to the working effectiveness (average cell detachment ratio = 88%) and the cell viability. Compared to the trypsin-based method, ASCs harvested from PA17CS exhibited superior stemness characteristics along with SDF-1-mediated CXCR4 chemotactic response for stem cell homing. Moreover, injection of ASCs generated from PA17CS blend could more effectively induce neovascularization and protect skin flaps during an ischemic injury in a rat model.

A simple method to improve the antibiotic elution profiles from polymethylmethacrylate bone cement spacers by using rapid absorbable sutures.

OBJECTIVE: Antibiotic-loaded bone cement beads and spacers have been widely used for orthopaedic infection. Poor antibiotic elution is not capable of eradicating microbial pathogens and could lead to treatment failure. The elution profiles differ among different cement formulations. Although Simplex P cement has the least release amount, it is widely used due to its ready availability. Previous methods aiming to improve the elution profiles were not translated well to clinical practice. We sought to address this by using easily available materials to improve the elution profile of antibiotics from PMMA, which allows clinicians to implement the method intraoperatively. METHODS: Vancomycin was mixed with Simplex P cement. We used Vicryl Rapide sutures to fabricate sustained-release cement beads by repetitively passing the sutures through the beads and/or mixing suture segments into the cement formulation. Vancomycin elution was measured for 49 days. The mechanism of antibiotic release was observed with gross appearance and scanning electron microscopic images. The antimicrobial activities against MRSA were tested using an agar disk diffusion bioassay. RESULTS: Passing Vicryl Rapide sutures through cement beads significantly improved the elution profiles in the 7-week period. The increased ratios were 9.0% on the first day and 118.0% from the 2nd day to the 49th day. Addition of suture segments did not increase release amount. The Vicryl Rapide sutures completely degraded at the periphery and partially degraded at the center. The antibiotic particles were released around the suture, while antibiotic particles kept densely entrapped in the control group. The antimicrobial activities were stronger in passing suture groups. CONCLUSION: Passing fast absorbable sutures through PMMA cement is a feasible method to fabricate sustained-release antibiotic bone cement. Intra-cement tunnels can be formed, and the effect can last for at least 7 weeks. It is suitable for a temporary spacer between two stages of a revision surgery.

Retention Time Extended by Nanoparticles Improves the Eradication of Highly Antibiotic-Resistant Helicobacter pylori.

Helicobacter pylori infection usually causes gastrointestinal complications, including gastrointestinal bleeding or perforation, and serious infections may lead to gastric cancer. Amoxicillin is used to treat numerous bacterial infections but is easily decomposed in the gastric acid environment via the hydrolyzation of the ß-lactam ring. In this study, we develop chitosan-based nanoparticles loaded with amoxicillin (CAANs) as an H. pylori eradication platform. The CAANs were biocompatible and could retain the antibiotic activity of amoxicillin against H. pylori growth. The mucoadhesive property of chitosan and alginate enabled the CAANs to adhere to the mucus layers and penetrate through these to release amoxicillin in the space between the layers and the gastric epithelium. The use of this nanoparticle could prolong the retention time and preserve the antibiotic activity of amoxicillin in the stomach and help enhance the eradication rate of H. pylori and reduce treatment time. These CAANs, therefore, show potential for the effective treatment of highly antibiotic-resistant H. pylori infection using amoxicillin.

Human serum albumin-based nanoparticles alter raloxifene administration and improve bioavailability.

Osteoporosis is a disease that reduces bone mass and microarchitecture, which makes bones fragile. Postmenopausal osteoporosis occurs due to estrogen deficiency. Raloxifene is a selective estrogen receptor modulator used to treat postmenopausal osteoporosis. However, it has a low bioavailability, which requires long-term, high-dose raloxifene administration to be effective and causes several side effects. Herein, raloxifene was encapsulated in human serum albumin (HSA)-based nanoparticles (Ral/HSA/PSS NPs) as an intravenous-injection pharmaceutical formulation to increase its bioavailability and reduce the treatment dosage and time. In vitro results indicated that raloxifene molecules were well distributed in HSA-based nanoparticles as an amorphous state, and the resulting raloxifene formulation was stabile during long-term storage duration. The Ral/HSA/PSS NPs were both biocompatible and hemocompatible with a decreased cytotoxicity of high-dose raloxifene. Moreover, the intravenous administration of the prepared Ral/HSA/PSS NPs to rats improved raloxifene bioavailability and improved its half-life in plasma. These raloxifene-loaded nanoparticles may be a potential nanomedicine candidate for treating postmenopausal osteoporosis with lower raloxifene dosages.

Development of Injectable Calcium Sulfate and Self-Setting Calcium Phosphate Composite Bone Graft Materials for Minimally Invasive Surgery.

The demand of bone grafting is increasing as the population ages worldwide. Although bone graft materials have been extensively developed over the decades, only a few injectable bone grafts are clinically available and none of them can be extruded from 18G needles. To overcome the existing treatment limitations, the aim of this study is to develop ideal injectable implants from biomaterials for minimally invasive surgery. An injectable composite bone graft containing calcium sulfate hemihydrate, tetracalcium phosphate, and anhydrous calcium hydrogen phosphate (CSH/CaP paste) was prepared with different CSH/CaP ratios and different concentrations of additives. The setting time, injectability, mechanical properties, and biocompatibility were evaluated. The developed injectable CSH/CaP paste (CSH/CaP 1:1 supplemented with 6% citric acid and 2% HPMC) presented good handling properties, great biocompatibility, and adequate mechanical strength. Furthermore, the paste was demonstrated to be extruded from a syringe equipped with 18G needles and exerted a great potential for minimally invasive surgery. The developed injectable implants with tissue repairing potentials will provide an ideal therapeutic strategy for minimally invasive surgery to apply in the treatment of maxillofacial defects, certain indications in the spine, inferior turbinate for empty nose syndrome (ENS), or reconstructive rhinoplasty.

Time-lapse imaging using dual-color coded quantitative differential phase contrast microscopy.

SIGNIFICANCE: Quantitative differential phase contrast (qDPC) microscopy enhances phase contrast by asymmetric illumination using partially coherent light and multiple intensity measurements. However, for live cell imaging, motion artifacts and image acquisition time are important issues. For live cell imaging, a large number of intensity measurements can limit the imaging quality and speed. The minimum number of intensity measurements in qDPC can greatly enhance performance for live imaging. AIM: To obtain high-contrast, isotropic qDPC images with two intensity measurements and perform time-lapse imaging of biological samples. APPROACH: Based on the color-coded design, a dual-color linear-gradient pupil is proposed to achieve isotropic phase contrast response with two intensity measurements. In our method, the purpose of designing a dual-color coded pupil is twofold: first, to obtain a linear amplitude gradient for asymmetric illumination, which is required to get a circular symmetry of transfer function, and second, to reduce the required number of frames for phase retrieval. RESULTS: To demonstrate the imaging performance of our system, standard microlens arrays were used as samples. We performed time-lapse quantitative phase imaging of rat astrocytes under a low-oxygen environment. Detailed morphology and dynamic changes such as the apoptosis process and migration of cells were observed. CONCLUSIONS: It is shown that dual-color linear-gradient pupils in qDPC can outperform half-circle and vortex pupils, and isotropic phase transfer function can be achieved with only two-axis measurements. The reduced number of frames helps in achieving faster imaging speed as compared to the typical qDPC system. The imaging performance of our system is evaluated by time-lapse imaging of rat astrocytes. Different morphological changes in cells during their life cycle were observed in terms of quantitative phase change values.

Biological properties of human periodontal ligament cell spheroids cultivated on chitosan and polyvinyl alcohol membranes.

BACKGROUND/PURPOSE: Multicellular spheroid cultures have attracted increasing attention in the field of periodontal regeneration. However, very few studies have reported the periodontal ligament (PDL) cell spheroid formation via biomaterials-induced processes. This study investigated the biological characteristics of human PDL cell spheroids formed on two hydrophilic polymer-based biomaterials, namely chitosan and polyvinyl alcohol. METHODS: The expressions of periostin, paxillin, hypoxia-inducible factor 1-α (HIF-1α), and vascular endothelial growth factor (VEGF) were analyzed. Cell migration ability was assessed using a scratch assay. Furthermore, PDL cell spheroids were cultured in 3D-printed polylactic acid scaffolds to evaluate mineralizing capability. RESULTS: Western blot analysis revealed increased expressions of periostin, HIF-1α, and VEGF in the 3D spheroids. After the spheroids were reseeded, the cells gradually migrated outward from the spheroids and time-dependent distribution of paxillin was observed. The cells migrating outward from the 3D spheroids demonstrated greater migration ability than that of 2D monolayer cells. Compared to the dissociated cells from a monolayer culture, the cell spheroids formed on the chitosan membrane exhibited elevated alkaline phosphatase activity and an increase in mineralized matrix deposition. CONCLUSION: The biomaterial-induced formation of PDL cell spheroids suggests a novel strategy for cell delivery in research and clinical applications of periodontal regeneration.