Hypericin nanoparticles for self-illuminated photodynamic cytotoxicity based on bioluminescence resonance energy transfer.

The purpose of this study was to investigate the self-sensitization of photosensitizer without an external light source to produce a photodynamic therapy (PDT) effect based on the principle of bioluminescence resonance energy transfer (PDT-BRET). First, we demonstrated that HeLa cells could efficiently express firefly luciferase (FLase) after the firefly luciferase gene was transfected with the FLase-gene plasmid (FLase-GP), and proved that FLase could act on the substrate firefly D-luciferin (FLuc) to produce photons. The generated photons activate the photosensitizer hypericin (Hyp) and induce cytotoxicity. Then, we successfully prepared carboxymethyl chitosan-modified poly(lactic-co-glycolic acid) nanoparticles (CPNPs) loaded with FLuc (FLuc-CPNPs) and with loaded Hyp (Hyp-CPNPs). Their physicochemical and pharmaceutical characteristics indicated that they were an excellent drug delivery system. Characterization of the biological effects showed that they could be located in the mitochondrial, had higher ROS generation and stronger cytotoxicity. In vivo results also showed that PDT-BRET was as effective as classic PDT. PDT-BRET and the related drug delivery system are expected to become a new platform for anticancer therapy.

Oral administration co-delivery nanoparticles of docetaxel and bevacizumab for improving intestinal absorption and enhancing anticancer activity.

In this study, to improve the intestinal absorption of small molecule chemotherapeutic drug docetaxel (DTX) and macromolecular monoclonal antibody drug bevacizumab (BVZ), we designed and prepared a type of co-delivery nanoparticles for the oral administration of DTX and BVZ. Carboxymethyl chitosan (CMC) and poly(lactic-co-glycolic acid) (PLGA) were used as the carrier of DTX nanoparticles (CPNPDTX), and methoxy polyethylene glycol-poly (ß-amino ester) (mPEG-PAE) was used as the carrier of BVZ nanoparticles (PPNPBVZ). Then, the two nanoparticles were physically mixed in mass ratios to form mixed co-delivery nanoparticles, which was named as CPNPDTX&PPNPBVZ. The nanoparticles were characterized with pH-sensitive drug release property. CPNPDTX&PPNPBVZ could significantly increase the bioavailability of DTX and BVZ according to the more cellular uptake in Caco-2 cells and the higher absorption in the intestinal tissue. Compared with free DTX and BVZ, CPNPDTX&PPNPBVZ showed excellent cytotoxic effects on A549 cells. Our study revealed the potential of co-delivery nanoparticles of binary mixture of chemotherapeutic small molecule and macromolecular antibody drug as an oral administration therapeutic system.

Binary blended co-delivery nanoparticles with the characteristics of precise pH-responsive acting on tumor microenvironment.

Although combined chemotherapy had achieved the ideal efficacy in clinical anti-cancer therapeutic, the issues that need to be addressed are non-targeting and toxic-side effects of small molecule chemical drug (SMCD). In this study, we designed and prepared a novel binary blended co-delivered nanoparticles (BBCD NPs) with pH-responsive feature on tumor microenvironment. The BBCD NPs consists of two kind of drug-loaded NPs, in one of which carboxymethyl chitosan (CMC) and Poly (lactic-co-glycolic acid) (PLGA) were chosen as delivery carrier to load anti-cancer drug vincristine (VCR), named CMC-PLGA-VCR NPs (or CPNPVCR); and in the other of which methoxy poly(ethylene glycol)-poly(ß-amino ester) (mPEG-PAE) were chosen as delivery carrier to load anti-fibrotic drug pirfenidone (PFD), named mPEG-PAE-PFD NPs (or PPNPPFD). Then, the two types of NPs (CPNPVCR and PPNPPFD) were physically mixed in mass ratios to form BBCD NPs, which was named CPNPVCR&PPNPPFD. CPNPVCR&PPNPPFD had good encapsulation efficiency and loading capacity, and the particle size distribution was uniform. In cytotoxicity experiments and non-contact co-culture studies in vitro, the model drugs loaded in CPNPVCR&PPNPPFD could respectively target cancer cell and cancer associated fibroblast (CAF) owing to the precise pH-sensitive drug release in the pharmacological targets and show stronger synergism than that of the combined treatment of two free drugs. As a modularity and assemble ability feature in design, BBCD NPs would have the advantages on the terms of concise on preparation process, controllable on quality standard, stable in natural environment storage. The research results can provide scientific evidence for the further development of a novel drug co-delivery system with multi-type cell targets.

Co-delivery nanoparticles of doxorubicin and chloroquine for improving the anti-cancer effect in vitro.

To increase the efficacy of small molecule chemotherapeutic drug (SMCD) and reduce its toxic and side effects, we selected two model drugs doxorubicin (DOX) and chloroquine (CQ). DOX is a SMCD and CQis a chemosensitizer with autophagy inhibition. Poly(lactic-co-glycolic acid) (PLGA) and alpha-tocopherol polyethylene glycol 1000 succinate were chosen as delivery carriers to design and prepare a novel type of drug co-delivery single-nanoparticles by emulsification-solvent volatilisation, named NPDOX+CQ. The physicochemical properties of NPDOX+CQ were characterised. Then A549 cells and A549/Taxol cells were used for the in vitro anti-cancer effect study. At the same time, cellular uptake, intracellular migration and anti-cancer mechanism of nanoparticles were studied. The NPs showed a uniform spherical shape with good dispersibility, and both drugs had good encapsulation efficiency and loading capacity. In all formulations, NPDOX+CQ showed the highest in vitro cytotoxicity. The results showed that NPs could protect drugs from being recognised and excluded by P-glycoprotein (P-gp). Moreover, the results of the mechanistic study demonstrated that NPs were transported by autophagy process after being taken up by the cells. Therefore, during the migration of NPDOX+CQ, CQ could exert its efficacy and block autophagy so that DOX would not be hit by autophagy. Western Blot results showed that NPDOX+CQ had the best inhibition effect of autophagy. It can be concluded that the system can prevent the drug from being recognised and excluded by P-gp, and CQ blocks the process of autophagy so that the DOX is protected and more distributed to the nucleus of multidrug resistance (MDR) cell. The NPDOX+CQ constructed in this study provides a feasible strategy for reversing MDR in tumour cells.

Co-delivery nanoparticles of anti-cancer drugs for improving chemotherapy efficacy.

To achieve superior therapeutic efficacy, the combination chemotherapy using two or more anticancer drugs in clinical practice has been generally accepted as a feasible strategy. On account of the concept of combination chemotherapy, co-delivery of anticancer drugs with nanotechnology gradually becomes a desired strategy and one of the research frontiers on modern drug delivery. In recent years, nano drug co-delivery system (NDCDS), which loads at least two anticancer drugs with different physicochemical and pharmacological properties into a combination delivery system, has achieved rapid development. NDCDS synergistically inhibited the growth of the tumor compared with the free drugs. In this review, we highlighted the current state of co-delivery nanoparticles and the most commonly used nanomaterial, discussed challenges and strategies, and prospect future development.

Epigallocatechin-3-gallate and Epigallocatechin-3-O-(3-O-methyl)-gallate Enhance the Bonding Stability of an Etch-and-Rinse Adhesive to Dentin.

This study evaluated epigallocatechin-3-gallate (EGCG) and epigallocatechin-3-O-(3-O-methyl)-gallate (EGCG-3Me) modified etch-and-rinse adhesives (Single Bond 2, SB 2) for their antibacterial effect and bonding stability to dentin. EGCG-3Me was isolated and purified with column chromatography and preparative high performance liquid chromatography. EGCG and EGCG-3Me were incorporated separately into the adhesive SB 2 at concentrations of 200, 400, and 600 µg/mL. The effect of cured adhesives on the growth of Streptococcus mutans (S. mutans) was determined with scanning electron microscopy and confocal laser scanning microscopy; the biofilm of bacteria was further quantified via optical density 600 values. The inhibition of EGCG and EGCG-3Me on dentin-originated collagen proteases activities was evaluated with a proteases fluorometric assay kit. The degree of conversion (DC) of the adhesives was tested with micro-Raman spectrum. The immediate and post-thermocycling (5000 cycles) bond strength was assessed through Microtensile Bond Strength (MTBS) test. Cured EGCG/EGCG-3Me modified adhesives inhibit the growth of S. mutans in a concentration-dependent manner. The immediate MTBS of SB 2 was not compromised by EGCG/EGCG-3Me modification. EGCG/EGCG-3Me modified adhesive had higher MTBS than SB 2 after thermocycling, showing no correlation with concentration. The DC of the adhesive system was affected depending on the concentration of EGCG/EGCG-3Me and the depth of the hybrid layer. EGCG/EGCG-3Me modified adhesives could inhibit S. mutans adhesion to dentin-resin interface, and maintain the bonding stability. The adhesive modified with 400 µg/mL EGCG-3Me showed antibacterial effect and enhanced bonding stability without affect the DC of adhesive.

Effects of Epigallocatechin-3-gallate (EGCG) on the bond strength of fiber posts to Sodium hypochlorite (NaOCl) treated intraradicular dentin.

This study was to evaluate the effect of Epigallocatechin-3-gallate (EGCG) on the bond strength of two adhesive systems to the Sodium hypochlorite (NaOCl) treated intraradicular dentin. The roots were accepted regular root canal treatments and post space preparations, and further divided into eight groups according to the four post space pretreatments and two dentin adhesives [Single Bond 2 (SB2) and Clearfil SE Bond (CSB)] used. The push-out strength before and after thermocycling in different root region (coronal and apical), DC of the adhesive and morphologic patterns of treated post space were evaluated. NaOCl + EGCG groups showed the highest push-out strength regardless of the adhesive type, root region and time (P < 0.05). NaOCl pretreatment significantly decreased the push-out strengths and DC of CSB (P < 0.05). EGCG could improve the bonding properties of both SB2 and CSB to NaOCl treated intraradicular dentin. The effect of NaOCl on bonding of a fiber post depended on the type of the adhesive.

Occlusion and Disocclusion Time Changes in Single Unit Crowns Designed by Functional Generated Path Technique: A Randomised Clinical Trial.

Although it is believed that implementation of the functional generated path (FGP) technique can facilitate occlusal surface design for restorations, it has not been objectively compared in situ with the conventional fabrication yet. Therefore, in the present study, a single-blind crossover clinical trial was conducted using T-scan to compare changes in occlusion time (OT) and disocclusion time (DT) of single posterior artificial crowns designed differently using FGP technique (FGP), average-value FGP technique (AVR) and conventional fabrication (CON). Each of the 10 participants took part in the study tried three artificial crowns in different sequences according to a computer generated randomization list. The results objectively revealed that changes in OT and DT were significantly smaller for FGP than CON (P < 0.05) and considerably smaller for AVR than CON, respectively. The subjective feedback and the occlusal adjusting time were better and shorter for FGP and AVR than CON (P < 0.05). No harm to the participants occurred. Overall, FGP is an efficient technique showing more physiological harmonious relationship with the articulating system.

Antibacterial Activity and Bonding Ability of an Orthodontic Adhesive Containing the Antibacterial Monomer 2-Methacryloxylethyl Hexadecyl Methyl Ammonium Bromide.

Irreversible white spot lesion (WSL) occurs in up to 50% of patients during orthodontic treatment. Therefore, orthodontic adhesives need to be able to inhibit or reduce bacterial growth in order to prevent or minimize WSL. This study evaluated the antibacterial effect and shear bond strength (SBS) of a resin-based orthodontic adhesive containing the antibacterial monomer 2-methacryloxylethyl hexadecyl methyl ammonium bromide (MAE-HB). MAE-HB was added at three concentrations (1, 3, and 5 wt%) to a commercial orthodontic adhesive Transbond XT, while the blank control comprised unmodified Transbond XT. Their antibacterial effects on Streptococcus mutans were investigated after 0 and 180 days of aging. The SBS of metal brackets bonded to the buccal enamel surface of human premolars was assessed. Compared with the blank control, the MAE-HB-incorporated adhesive exhibited a significant contact inhibitory effect on the growth of S. mutans (P < 0.05), even after 180 days of aging. SBS and adhesive remnant index values revealed that the bonding ability of the experimental adhesive was not significantly adversely affected by the incorporation of MAE-HB at any of the three concentrations. Therefore, orthodontic adhesives with strong and long-lasting bacteriostatic properties can be created through the incorporation of MAE-HB without negatively influencing bonding ability.

Effect of an Experimental Direct Pulp-capping Material on the Properties and Osteogenic Differentiation of Human Dental Pulp Stem Cells.

Effective pulp-capping materials must have antibacterial properties and induce dentin bridge formation; however, many current materials do not satisfy clinical requirements. Accordingly, the effects of an experiment pulp-capping material (Exp) composed of an antibacterial resin monomer (MAE-DB) and Portland cement (PC) on the viability, adhesion, migration, and differentiation of human dental pulp stem cells (hDPSCs) were examined. Based on a Cell Counting Kit-8 assay, hDPSCs exposed to Exp extracts showed limited viability at 24 and 48 h, but displayed comparable viability to the control at 72 h. hDPSC treatment with Exp extracts enhanced cellular adhesion and migration according to in vitro scratch wound healing and Transwell migration assays. Exp significantly upregulated the expression of osteogenesis-related genes. The hDPSCs cultured with Exp exhibited higher ALP activity and calcium deposition in vitro compared with the control group. The novel material showed comparable cytocompatibility to control cells and promoted the adhesion, migration, and osteogenic differentiation of hDPSCs, indicating excellent biocompatibility. This new direct pulp-capping material containing MAE-DB and PC shows promise as a potential alternative to conventional materials for direct pulp capping.

Antibacterial activity of a modified unfilled resin containing a novel polymerizable quaternary ammonium salt MAE-HB.

Resins with strong and long-lasting antibacterial properties are critical for the prevention of secondary dental caries. In this study, we evaluated the antibacterial effect and the underlying mechanism of action of an unfilled resin incorporating 2-methacryloxylethyl hexadecyl methyl ammonium bromide (MAE-HB) against Streptococcus mutans UA159 (S. mutans UA159). MAE-HB was added into unfilled resin at 10 mass%, and unfilled resin without MAE-HB served as the control. Bacterial growth was inhibited on 10%-MAE-HB unfilled resin compared with the control at 1 d, 7 d, 30 d, or 180 d (P < 0.05). The growth inhibitory effect was independent of the incubation time (P > 0.05). No significant differences in the antibacterial activities of eluents from control versus 10%-MAE-HB unfilled resins were observed at any time point (P > 0.05). The number of bacteria attached to 10%-MAE-HB unfilled resin was considerably lower than that to control. Fe-SEM and CLSM showed that 10%-MAE-HB unfilled resin disturbed the integrity of bacterial cells. Expression of the bacterial glucosyltransferases, gtfB and gtfC, was lower on 10%-MAE-HB unfilled resin compared to that on control (P < 0.05). These data indicate that incorporation of MAE-HB confers unfilled resin with strong and long-lasting antibacterial effects against S. mutans.