Optical properties of mountain primary and secondary brown carbon aerosols in summertime.

Brown carbon (BrC) can affect atmospheric radiation due to its strong absorption ability from the near ultraviolet to the visible range, thereby influencing global climate. However, given the complexity of BrC's chemical composition, its optical properties are still poorly understood, especially in mountainous areas. In this study, the black carbon (BC) tracer method is used to explore the light-absorbing properties of primary and secondary BrC at Mount Hua, China during the 2018 summer period. The primary BrC absorption contributes to 10-15% of the total BrC absorption at a wavelength of 370 nm. From the positive matrix factorization analysis, traffic emissions are found to be a major source of primary BrC absorption (44%), followed by industry and biomass-burning emissions (29%). The secondary BrC accounts for 87% of the total BrC absorption at a wavelength of 370 nm, indicating that BrC is dominated by secondary formation. The observation of a higher secondary BrC absorption diurnal pattern at Mount Hua can be affected by secondary BrC in the residual layer after sunrise and the formation of light-absorbing chromophores by photochemical oxidation in the afternoon. The estimated average mass absorption efficiencies of primary and secondary BrC (MAE_pri and MAE_sec, respectively) are 0.4 m2/g and 2.1 m2/g at wavelengths of 370 nm, respectively, indicating a stronger light-absorbing ability for secondary BrC than for primary BrC. There is no significant difference in MAE_pri within a daily variation, but the daytime MAE_sec value is higher than that during the night. Our study shows that secondary BrC is important to light absorption in mountainous areas.

Tensile Deformation and Fracture Behavior of Nickel-Based Superalloy DZ951G.

DZ951G is a novel developed nickel-based directional solidified superalloy with an incipient high melting point and low density. Compared with DZ417G superalloy, DZ951G superalloy has a higher ultimate tensile strength. At intermediate temperatures, the plasticity and strength were both markedly improved, and an obviously anomalous yield behavior could be observed where the yield strength reached its maximum at 760 °C. Below 600 °C, two competitive modes of dislocations shearing γ' particles existed, in which one was the formation of stacking faults and another was a/2<101> dislocations shearing. At intermediate temperatures, a transitional phase between shearing γ' particles and bypassing appeared, and the fracture translated from brittle fracture into ductile fracture. Exceeding 900 °C, bypassing of dislocations was operated under thermal activation. Moreover, short continuous stacking faults still existed at 760 °C. Finally, the various dislocation configurations were rationally illuminated and explained with the intrinsic connection of mechanical properties.

Nanoporous membrane-based cell chip for the study of anti-cancer drug effect of retinoic acid with impedance spectroscopy.

This paper presents a novel microchip with nanoporous anodic alumina membrane for the study of anti-cancer drug effect of retinoic acid (RA) on human esophageal squamous epithelial KYSE30 cancer cells in vitro with impedance spectroscopy. The impedance experiments with 0.01 M retinoic acid (RA) were explored for the study of anti-cancer drug effects on KYSE30 cancer cells. The impedance was monitored in the time domain at 0.1 Hz. After addition of 0.01 M RA to the cell chip, the impedance magnitude decreased with time from the value with confluent cell layer and returned to the initial base line after around 12h. The fluorescence experiments testified that this impedance decrease was due to the cell morphology change induced by RA.

Impedance studies of bio-behavior and chemosensitivity of cancer cells by micro-electrode arrays.

Impedimetric analysis on adherently growing cells by micro-electrodes provides information related to cell number, cell adhesion and cellular morphology. In this study, cell-based biosensor with micro-electrode arrays (MEAs) was used to monitor the culture behavior of mammalian cancer cells and evaluate the chemosensitivity of anti-cancer drugs using electrochemical impedance spectroscopy. The platinum electrode arrays were fabricated by semiconductor technology to a 10 x 10 pattern, with diameter of 80 microm of each electrode. The human oesophageal cancer cell lines (KYSE 30) were cultured on the surface of the electrodes with the pre-coated fibronectin, the connecting protein for tumor cells metastasis and adhesion in extracellular matrix. Morphology changes during cells adhesion, spreading, and proliferation can be detected by impedimetric analysis in a real time and non-invasive way. Cisplatin was added to cells for potential drug screening applications. The experimental results show that this well-known anti-cancer drug has characteristic chemosensitivity effects on KYSE 30 cells which can be detected by MEA. Thus, this cell-based chip provides a useful analytical method for cancer research.

Label-free DNA sensor based on organic thin film transistors.

Organic thin film transistors (OTFTs) are excellent candidates for the application on disposable sensors due to their potentially low-cost fabrication process. A novel DNA sensor based on OTFTs with semiconducting polymer poly(3-hexylthiophene) has been fabricated by solution process. Both single- and double-strand DNA molecules are immobilized on the surface of the Au source/drain electrodes of different OTFT devices, producing a dramatic change in the performance of the devices, which is attributed to the increase of the contact resistances at the source/drain electrodes. Single-strand DNA and double-strand DNA are differentiated successfully in the experiments indicating that this is a promising technique for sensing DNA hybridization without labelling.

AlGaN/GaN heterostructures for non-invasive cell electrophysiological measurements.

Recently, the ability to create bio-semiconductor hybrid devices has gained much interest for cell activity analysis. AlGaN material system has been demonstrated to be a promising cell-based biosensing platform due to a combination of unique properties, such as chemical inertness, optical transparency and low signal to noise ratios. To investigate the potential application of hybrid cell-AlGaN/GaN field effect transistor for cell electrophysiological monitoring, saos-2 human osteoblast-like cells were cultured in high density in non-metallized gate area of a transparent AlGaN/GaN heterostructure field effect transistor. We implemented and characterized the transistor recording of extracellular voltage in the cell-chip junction using the FET chip. The effect of ion channel blocker TEA on transistor signal was explored in order to test the capability of this hybrid chip for in vitro drug screening bioassay. Finally, the effect of cell adhesion on transistor signal was also studied by applying the protein kinase inhibitor H-7.