RESUMEN
The absolute structures of a pair of infinite Na(H2O)4+-connected ε-Keggin-Al13 species (Na-ε-K-Al13) that were inversion structures and mirror images of each other were determined. Single crystals obtained by adding A2SO4 (A = Li, Na, K, Rb, or Cs) solution to NaOH-hydrolyzed AlCl3 solution were subjected to X-ray structure analyses. The statistical results for 36 single crystals showed that all the crystals had almost the same unit cell parameter, belonged to the same F4Ì 3m space group, and possessed the same structural formula [Na(H2O)4AlO4Al12(OH)24(H2O)12](SO4)4·10H2O. However, the crystals had two inverse absolute structures (denoted A and B), which had a crystallization ratio of 1:1. From Li+ to Cs+, with increasing volume of the cation coexisting in the mother solution, the degree of disorder of the four H2O molecules in the Na(H2O)4+ hydrated ion continuously decreased; they became ordered when the cation was Cs+. Absolute structures A and B are the first two infinite aluminum polycations connected by statistically occupied [(Na1/4)4(H2O)4]+ hydrated ions. The three-dimensional structure of the infinite Na-ε-K-Al13 species can be regarded as the assembly of finite ε-K-Al13 species linked by [(Na1/4)4(H2O)4]+ in a 1:1 ratio. In this assembly, each [(Na1/4)4(H2O)4]+ is connected to four ε-K-Al13 and each ε-K-Al13 is also connected to four [(Na1/4)4(H2O)4]+ in tetrahedral orientations to form a continuous rigid framework structure, which has an inverse spatial orientation between absolute structure A and B. This discovery clarifies that the ε-K-Al13 (or ε-K-GaAl12) species in Na[MO4Al12(OH)24(H2O)12](XO4)4·nH2O (M = Al, Ga; X = S, Se; n = 10-20) exists as discrete groups and deepens understanding of the formation and evolution process of polyaluminum species in forcibly hydrolyzed aluminum salt solution. The reason why Na+ statistically occupies the four sites was examined, and a formation and evolution mechanism of the infinite Na-ε-K-Al13 species was proposed.
RESUMEN
The DOHaD theory suggests that adverse environmental factors in early life may lead to the development of metabolic diseases including diabetes and hypertension in adult offspring through epigenetic mechanisms such as DNA methylation. Folic acid (FA) is an important methyl donor in vivo and participates in DNA replication and methylation. The preliminary experimental results of our group demonstrated that lipopolysaccharide (LPS, 50 µg/kg/d) exposure during pregnancy could lead to glucose metabolism disorders in male offspring, but not female offspring; however, the effect of folic acid supplementation on glucose metabolism disorders in male offspring induced by LPS exposure remains unclear. Therefore, in this study, pregnant mice were exposed to LPS on gestational day (GD) 15-17 and were given three doses of FA supplementation (2 mg/kg, 5 mg/kg, or 40 mg/kg) from mating to lactation to explore its effect on glucose metabolism in male offspring and the potential mechanism. This study confirmed that FA supplementation of 5 mg/kg in pregnant mice improved glucose metabolism in LPS-exposed offspring during pregnancy by regulating gene expression.
Asunto(s)
Trastornos del Metabolismo de la Glucosa , Efectos Tardíos de la Exposición Prenatal , Embarazo , Femenino , Humanos , Animales , Ratones , Masculino , Lipopolisacáridos/efectos adversos , Efectos Tardíos de la Exposición Prenatal/inducido químicamente , Ácido Fólico/efectos adversos , Suplementos Dietéticos , Glucosa/metabolismoRESUMEN
Solid non-aqueous phases (NAPs), such as silicone rubber, have been used extensively to improve the removal of volatile organic compounds (VOCs). However, the removal of VOCs is difficult to be further improved because the poor understanding of the mass transfer and reaction processes. Further, the conventional reactors were either complicated or uneconomical. In view of this, herein, an airlift bioreactor with silicone rubber was designed and investigated for dichloromethane (DCM) treatment. The removal efficiency of Reactor 1 (with silicone rubber) was significantly higher than that of Reactor 2 (without silicone rubber), with corresponding higher chloride ion and CO2 production. It was found that Reactor 1 achieved a much better DCM shock tolerance capability and biomass stability than Reactor 2. Silicone rubber not only enhanced the mass transfer in terms of both gas/liquid and gas/microbial phases, but also decreased the toxicity of DCM to microorganisms. Noteworthily, despite the identical inoculum used, the relative abundance of potential DCM-degrading bacteria in Reactor 1 (91.2%) was much higher than that in Reactor 2 (24.3%) at 216 h. Additionally, the silicone rubber could be automatically circulated in the airlift bioreactor due to the driven effect of the airflow, resulting in a significant reduction of energy consumption.
Asunto(s)
Cloruro de Metileno , Elastómeros de Silicona , Biodegradación Ambiental , Biomasa , Reactores BiológicosRESUMEN
Two-phase partitioning bioreactors (TPPBs) have been extensively used for volatile organic compounds (VOCs) removal. To date, most studies have focused on improving the mass transfer of gas phases/non-aqueous phases (NAPs)/aqueous phases, whereas the NAP/biological phases and gas/biological phases transfer has been neglected. Herein, chitosan was introduced into a TPPB to increase cell surface hydrophobicity (CSH) and improve the n-hexane mass transfer. The performance and stability of the TPPB with chitosan for n-hexane biodegradation were investigated, and it was found out that the TPPB with chitosan achieved maximum removal efficiency and elimination capacity of 80.6% and 26.5 g m-3 h-1, thereby reaching much higher values than those obtained without chitosan (61.3% and 15.2 g m-3 h-1). Chitosan not only obvio usly increased cell surface hydrophobicity and cell dry biomass on the surface of silicone oil, but might also allow hydrophobic cells in aqueous phases to directly capture and biodegrade n-hexane, resulting in an obvious improvement of mass transfer from the gas phase to biomass. Stability enhancement was another attractive advantage from chitosan addition. This study might provide a new strategy for the development of TPPB in the hydrophobic VOCs treatment.
Asunto(s)
Quitosano , Pseudomonas mendocina , Biodegradación Ambiental , Reactores Biológicos , HexanosRESUMEN
Suitable nitrogen application rate can significantly increase grain filling rate and yield and improve nutritional quality. Denghai 518 (DH518) and Zhengdan 958 (ZD958) were used as experimental materials in this study. A field experiment with four treatments, no nitrogen treatment (N0), decrement nitrogen application rate (N1, 129 kg N·hm-2), suitable nitrogen rate (N2, 184.5 kg N·hm-2) and excessive nitrogen rate (N3, 300 kg N·hm-2), was conducted to explore the effects of nitrogen fertilization on grain filling parameters and nutritional qualities of summer maize. Results showed that grain filling characteristics, grain dry weight, and yield in N0 treatment was decreased. With increasing nitrogen application rate in the suitable range, average filling rate, grain dry weight, and yield increased. Grain yield of two hybrids in N1 and N2 treatments was higher than that of N0 by 16.4%-57.2% and 35.8%-65.1%, respectively. Grain protein, soluble sugar, starch contents and the ratio of amylopectin and amylase contents were lower and crude fat content was higher in N0 treatment. Grain protein content, soluble sugar content and starch content in N2 of DH518 were higher than that of N0 and N1 by 32.5% and 6.5%, 19.9% and 9.5%, 8.9% and 5.2%, and the ratio of amylopectin and amylose contents was increased. Grain protein, soluble sugar and starch contents in N2 of ZD958 were higher than that of N0 and N1 by 16.9% and 7.8%, 30.5% and 14.8%, 11.5% and 5.7%, and the ratio of amylopectin and amylase contents was increased. Crude fat content in N2 of both hybrids decreased significantly by 4.8%-12.3% than that of N0 and N1. However, yield and nutritional quality was increased in N3 treatment than that of N2. Our results suggested that suitable nitrogen rate could enhance grain filling, grain weight, and grain nutritional quality.
Asunto(s)
Nitrógeno , Zea mays , Grano Comestible , Fertilizantes , Valor Nutritivo , Estaciones del AñoRESUMEN
A yellowish-pigmented bacterial strain, designated as MQ-18T, was isolated from a sample of activated sludge collected from a pharmaceutical factory in Zhejiang, China. The strain was characterized through a polyphasic taxonomy approach. 16S rRNA gene sequence analysis demonstrated that strain MQ-18T showed high similarities to Piscinibacter defluvii SH-1T (99.7â%) and Piscinibacter aquaticus IMCC1728T (98.4â%), thereby suggesting that it belongs to the genus Piscinibacter. The DNA-DNA relatedness values of this strain to strains SH-1T and IMCC1728T were only 35.4 and 33.3â%, respectively. Cells of MQ-18T were Gram-negative, aerobic, motile, rod-shaped and non-spore forming. This strain exhibited growth at 25-37 °C (optimum: 30 °C) in the presence of 0-3.0â% (w/v) NaCl (optimum, 0â% NaCl) and at pH 5.0-8.0 (pH 7.0). The predominant fatty acids were C12â:â0 (5.5â%), C16â:â0 (33.7â%), summed feature 3 (C16â:â1ω7c and/or C16â:â1ω6c; 38.5â%), and summed feature 4 (anteiso-C17â:â1 B and/or iso C17â:â1 I; 11.6â%). The main quinone type was ubiquinone-8, and the major polyamines were cadaverine and putrescine. The major polar lipid profile consisted of diphosphatidylglycerol, phosphatidylglycerol and phosphatidylethanolamine. The DNA G+C content was 70.1 mol%. On the basis of its phylogenetic, phenotypic and physiological characteristics, strain MQ-18T is considered to represent a novel species of the genus Piscinibacter, for which the name Piscinibacter caeni sp. nov. is proposed. The type strain is MQ-18T (CCTCC AB 2017223T=JCM 32138T).