Adjustable ultraviolet and white light dual emission phosphor Y2Sr(Ga1-yAly)4SiO12:xPr3+ for health lighting.

Mid-ultraviolet light (290-320 nm) can promote human vitamin D synthesis, which helps in the prevention and treatment of rickets and cartilage disease. For people who lack sufficient ultraviolet radiation all year round, it is significant to supplement the ultraviolet component in daily lighting sources. However, there are few luminous materials showing a combination of mid-ultraviolet light and white light emission on the market. Here, we designed a new material, Y2Sr(Ga1-yAly)4SiO12:xPr3+ (YSGAS:xPr3+), which achieves dual emission of 320 nm ultraviolet and white light from a single substrate with a single doped phosphor. Without Al3+ ions, the emission intensity of the Y2SrGa4SiO12:xPr3+ phosphor shows a contribution-dependent relationship, and concentration quenching due to exchange interaction. The crystal field environment was regulated by partially replacing Ga3+ ions with Al3+ ions. After introducing Al3+, YSGAS:xPr3+ phosphors exhibit dual ultraviolet emission (320 nm) and visible light emission. The emission color of YSGAS:xPr3+ can be adjusted by changing the Al3+ concentration, and Y2Sr(Ga0.6Al0.4)4SiO12:1%Pr3+ emits both ultraviolet light and white light. The LED device prepared by using the YSGAS:Pr3+ phosphor and chips shows a color temperature of 4858 K and appropriate CIE coordinates of (0.3474, 0.3390), indicating wide application prospects in the field of "health lighting" for particular populations.

A Wetting and Capture Strategy Overcoming Electrostatic Repulsion for Electroreduction of Nitrate to Ammonia from Low-Concentration Sewage.

Ammonia production by electrocatalytic nitrate reduction reaction (NO3 RR) in water streams is anticipated as a zero-carbon route. Limited by dilute nitrate in natural sewage and the electrostatic repulsion between NO3 - and cathode, NO3 RR can hardly be achieved energy-efficiently. The hydrophilic Cu@CuCoO2 nano-island dispersed on support can enrich NO3 - and produce a sensitive current response, followed by electrosynthesis of ammonia through atomic hydrogen (*H) is reported. The accumulated NO3 - can be partially converted to NO2 - without external electric field input, confirming that the Cu@CuCoO2 nano-island can strongly bind NO3 - and then trigger the reduction via dynamic evolution between Cu-Co redox sites. Through the identification of intermediates and theoretical computation. it is found that the N-side hydrogenation of *NO is the optimal reaction step, and the formation of N─N dimer may be prevented. An NH3 product selectivity of 93.5%, a nitrate conversion of 96.1%, and an energy consumption of 0.079 kWh gNH3 -1 is obtained in 48.9 mg-N L-1 naturally nitrate-polluted streams, which outperforms many works using such dilute nitrate influent. Conclusively, the electrocatalytic system provides a platform to guarantee the self-sufficiency of dispersed ammonia production in agricultural regions.

Recent progress on underwater soft robots: adhesion, grabbing, actuating, and sensing.

The research on biomimetic robots, especially soft robots with flexible materials as the main structure, is constantly being explored. It integrates multi-disciplinary content, such as bionics, material science, mechatronics engineering, and control theory, and belongs to the cross-disciplinary field related to mechanical bionics and biological manufacturing. With the continuous development of various related disciplines, this area has become a hot research field. Particularly with the development of practical technologies such as 3D printing technology, shape memory alloy, piezoelectric materials, and hydrogels at the present stage, the functions and forms of soft robots are constantly being further developed, and a variety of new soft robots keep emerging. Soft robots, combined with their own materials or structural characteristics of large deformation, have almost unlimited degrees of freedom (DoF) compared with rigid robots, which also provide a more reliable structural basis for soft robots to adapt to the natural environment. Therefore, soft robots will have extremely strong adaptability in some special conditions. As a type of robot made of flexible materials, the changeable pose structure of soft robots is especially suitable for the large application environment of the ocean. Soft robots working underwater can better mimic the movement characteristics of marine life in the hope of achieving more complex underwater tasks. The main focus of this paper is to classify different types of underwater organisms according to their common motion modes, focusing on the achievements of some bionic mechanisms in different functional fields that have imitated various motion modes underwater in recent years (e.g., the underwater sucking glove, the underwater Gripper, and the self-powered soft robot). The development of various task types (e.g., grasping, adhesive, driving or swimming, and sensing functions) and mechanism realization forms of the underwater soft robot are described based on this article.

Mechanistic insight into lead immobilization on bone-derived carbon/hydroxyapatite composite at low and high initial lead concentration.

The contamination of heavy metal lead has a serious impact on the natural environment and organisms. Among various materials for lead removal, animal bone derived hydroxyapatite has received extensive attention. However, there are different opinions among researchers regarding the mechanism of lead removal by hydroxyapatite, possibly due to varying initial lead concentrations used in different studies and lack of accuracy in the study of lead removal mechanisms. In present work, we synthesized a carbon-containing hydroxyapatite (CHAP) through pyrolysis of bovine bone with excellent lead removal efficiency, and further investigated the lead removal mechanism of CHAP under high and low initial lead concentrations by combining XRD Rietveld refinement, FTIR, XPS, HRTEM etc. methods. The results showed that under low initial Pb2+ concentration condition, the main mechanism of lead removal by CHAP was chemical precipitation (94.1 %), with small contributions of lead complexation with carbon functional groups and cation-π interactions on the amorphous carbon in CHAP, and surface adsorption on the precipitates. Under high initial Pb2+ concentration condition, chemical precipitation remained the main mechanism (74.68 %), but the contributions of the other three mechanisms increased, and ion exchange appeared in the later stage of the removal process. This study provides new insights on the lead immobilization mechanism by CHAP at different initial Pb2+ concentrations in water.

Electrocatalytic Hydrogenation Boosts Reduction of Nitrate to Ammonia over Single-Atom Cu with Cu(I)-N3C1 Sites.

The conversion of nitrate to ammonia can serve two important functions: mitigating nitrate pollution and offering a low energy intensity pathway for ammonia synthesis. Conventional ammonia synthesis from electrocatalytic nitrate reduction reactions (NO3RR) is often impeded by incomplete nitrate conversion, sluggish kinetics, and the competition of hydrogen evolution reactions. Herein, atomic Cu sites anchored on micro-/mesoporous nitrogen-doped carbon (Cu MNC) with fine-tuned hydrophilicity, micro-/mesoporous channels, and abundant Cu(I) sites were synthesized for selective nitrate reduction to ammonia, achieving ambient temperature and pressure hydrogenation of nitrate. Laboratory experiments demonstrated that the catalyst has an ammonia yield rate per active site of 5466 mmol gCu-1 h-1 and transformed 94.8% nitrate in wastewater containing 100 mg-N L-1 to near drinking water standard (MCL of 5 mg-N L-1) at -0.64 V vs RHE. Extended X-ray absorption fine structure (EXAFS) and theoretical calculations showed that the coordination environment of Cu(I) sites (Cu(I)-N3C1) localizes the charge around the central Cu atoms and adsorbs *NO3 and *H onto neighboring Cu and C sites with balanced adsorption energy. The Cu(I)-N3C1 moieties reduce the activation energy of rate-limiting steps (*HNO3 → *NO2, *NH2 → *NH3) compared with conventional Cu(II)-N4 and lead to a thermodynamically favorable process to NH3. The as-prepared electrocatalytic cell can run continuously for 84 h (14 cycles) and produce 21.7 mgNH3 with only 5.64 × 10-3 kWh energy consumption, suitable for decentralized nitrate removal and ammonia synthesis from nitrate-containing wastewater.

Four-quadrant fast compressive tracking of breast ultrasound videos for computer-aided response evaluation of neoadjuvant chemotherapy in mice.

BACKGROUND AND OBJECTIVE: Neoadjuvant chemotherapy (NAC) is a valuable treatment approach for locally advanced breast cancer. Contrast-enhanced ultrasound (CEUS) potentially enables the assessment of therapeutic response to NAC. In order to evaluate the response accurately, quantitatively and objectively, a method that can effectively compensate motions of breast cancer in CEUS videos is urgently needed. METHODS: We proposed the four-quadrant fast compressive tracking (FQFCT) approach to automatically perform CEUS video tracking and compensation for mice undergoing NAC. The FQFCT divided a tracking window into four smaller windows at four quadrants of a breast lesion and formulated the tracking at each quadrant as a binary classification task. After the FQFCT of breast cancer videos, the quantitative features of CEUS including the mean transit time (MTT) were computed. All mice showed a pathological response to NAC. The features between pre- (day 1) and post-treatment (day 3 and day 5) in these responders were statistically compared. RESULTS: When we tracked the CEUS videos of mice with the FQFCT, the average tracking error of FQFCT was 0.65 mm, reduced by 46.72% compared with the classic fast compressive tracking method (1.22 mm). After compensation with the FQFCT, the MTT on day 5 of the NAC was significantly different from the MTT before NAC (day 1) (p = 0.013). CONCLUSIONS: The FQFCT improves the accuracy of CEUS video tracking and contributes to the computer-aided response evaluation of NAC for breast cancer in mice.

Development of deep learning algorithms for predicting blastocyst formation and quality by time-lapse monitoring.

Approaches to reliably predict the developmental potential of embryos and select suitable embryos for blastocyst culture are needed. The development of time-lapse monitoring (TLM) and artificial intelligence (AI) may help solve this problem. Here, we report deep learning models that can accurately predict blastocyst formation and usable blastocysts using TLM videos of the embryo's first three days. The DenseNet201 network, focal loss, long short-term memory (LSTM) network and gradient boosting classifier were mainly employed, and video preparation algorithms, spatial stream and temporal stream models were developed into ensemble prediction models called STEM and STEM+. STEM exhibited 78.2% accuracy and 0.82 AUC in predicting blastocyst formation, and STEM+ achieved 71.9% accuracy and 0.79 AUC in predicting usable blastocysts. We believe the models are beneficial for blastocyst formation prediction and embryo selection in clinical practice, and our modeling methods will provide valuable information for analyzing medical videos with continuous appearance variation.

Artificial intelligence-based myocardial texture analysis in etiological differentiation of left ventricular hypertrophy.

BACKGROUND: Transthoracic echocardiography (TTE) is widely used in clinics to evaluate left ventricular hypertrophy (LVH). However, TTE is usually insufficient for the etiological diagnoses when morphological and functional features are nonspecific. With the booming of computer science and artificial intelligence (AI), previous literature has reported the application of radiomics based on cardiac magnetic resonance imaging, cardiac computed tomography and TTE in diagnosing several myocardial abnormalities, such as myocardial infarction, myocarditis, cardiac amyloidosis, and hypertrophic cardiomyopathy (HCM). In this study, we explored the possibility of using myocardial texture features in differentiating HCM, hypertensive heart disease (HHD) and uremic cardiomyopathy (UCM) based on echocardiography. To our knowledge, this was the first study to explore TTE myocardial texture analysis for multiple LVH etiology differentiation. METHODS: TTE images were reviewed retrospectively from January 2018 to collect 50 cases for each group of HHD, HCM and UCM. The apical four chamber view was retrieved. Seventeen first-order statistics and 60 gray level co-occurrence matrix (GLCM) features were extracted for statistics and classification test by support vector machine (SVM). RESULTS: Of all the parameters, entropy of brightness (EtBrt), standard deviation (Std), coefficient of variation (CoV), skewness (Skew), contrast7 (Cont7) and homogeneity5 (Hm5) were found statistically significant among the three groups (all P<0.05) and with acceptable reproducibility (intraobserver and interobserver ICC >0.50). As a result, HCM showed the most homogeneous myocardial texture, and was significantly different from HHD and UCM (all six features: P≤0.005). HHD appeared slightly more homogeneous than UCM, as only EtBrt and CoV were significant (P=0.011 and P=0.008). According to higher areas under the receiver operating characteristic curve (AUC) (>0.50), EtBrt, Std, and CoV were selected for test of classification as a combination of features. The AUC derived from SVM model was slightly improved compared with those of EtBrt, Std and CoV individually. CONCLUSIONS: AI-based myocardial texture analysis using ultrasonic images may be a potential approach to aiding LVH etiology differentiation.

Ultrasound Radiomics Effective for Preoperative Identification of True and Pseudo Gallbladder Polyps Based on Spatial and Morphological Features.

Purpose: To explore the value of ultrasound radiomics in the preoperative identification of true and pseudo gallbladder polyps and to evaluate the associated diagnostic accuracy. Methods: Totally, 99 pathologically proven gallbladder polyps in 96 patients were enrolled, including 58 cholesterol polyps (55 patients) and 41 gallbladder tubular adenomas (41 patients). Features on preoperative ultrasound images, including spatial and morphological features, were acquired for each lesion. Following this, two-stage feature selection was adopted using Fisher's inter-intraclass variance ratios and Z-scores for the selection of intrinsic features important for differential diagnosis achievement with support vector machine use. Results: Eighty radiomic features were extracted from each polyp. Eight intrinsic features were identified after two-stage selection. The contrast 14 (Cont14) and entropy 6 (Entr6) values in the cholesterol polyp group were significantly higher than those in the gallbladder adenoma group (4.063 ± 1.682 vs. 2.715 ± 1.867, p < 0.001 for Cont14; 4.712 ± 0.427 vs. 4.380 ± 0.720, p = 0.003 for Entr6); however, the homogeneity 13 (Homo13) and energy 8 (Ener8) values in the cholesterol polyp group were significantly lower (0.500 ± 0.069 vs. 0.572 ± 0.057, p < 0.001 for Homo13; 0.050 ± 0.023 vs. 0.068 ± 0.038, p = 0.002 for Ener8). These results indicate that the pixel distribution of cholesterol polyps was more uneven than that of gallbladder tubular adenomas. The dispersion degree was also significantly lower in the cholesterol polyp group than the gallbladder adenoma group (0.579 ± 0.054 vs. 0.608 ± 0.041, p = 0.005), indicating a lower dispersion of high-intensity areas in the cholesterol polyps. The long axis length of the fitting ellipse (Maj.Len), diameter of a circle equal to the lesion area (Eq.Dia) and perimeter (Per) values in the cholesterol polyp group were significantly lower than those in the gallbladder adenoma group (0.971 ± 0.485 vs. 1.738 ± 0.912, p < 0.001 for Maj.Len; 0.818 ± 0.393 vs. 1.438 ± 0.650, p < 0.001 for Eq.Dia; 2.637 ± 1.281 vs. 5.033 ± 2.353, p < 0.001 for Per), demonstrating that the cholesterol polyps were smaller and more regular in terms of morphology. The classification accuracy, sensitivity, specificity, and area under the curve values were 0.875, 0.885, 0.857, and 0.898, respectively. Conclusions: Ultrasound radiomic analysis based on the spatial and morphological features extracted from ultrasound images effectively contributed to the preoperative diagnosis of true and pseudo gallbladder polyps and may be valuable in their clinical management.

Anisotropic elasticity and plasticity of an organic crystal.

Organic crystals are generally considered to be brittle, inelastic materials, which pose challenges for application in flexible devices. Inspired by α helical proteins for their key structural role in flexible hair, here, we describe the construction of a spring-like hydrogen bonded network through the self-assembly of a-OH/e-OH cyclohexanol derivatives.

Taming photo-induced oxidation degradation of dihydropyridine drugs through cocrystallization.

Cocrystallization of nifedipine (NFD) and isonicotinamide (INA) resulted in two monotropic cocrystal polymorphs. The thermodynamically more stable polymorph presents superior photostability compared to the other. Cocrystallization can be an efficient approach to address the stability deficit of dihydropyridine drugs.

Drug-drug co-crystallization presents a new opportunity for the development of stable vitamins.

Drug-drug co-crystallization could realize combination drugs at a molecular level. Two polymorphic co-crystals between VD2 and VD3 were successfully designed and synthesized. These enantiotropic polymorphs exhibit significantly different physicochemical stabilities.

Working characteristics of variable intake valve in compressed air engine.

A new camless compressed air engine is proposed, which can make the compressed air energy reasonably distributed. Through analysis of the camless compressed air engine, a mathematical model of the working processes was set up. Using the software MATLAB/Simulink for simulation, the pressure, temperature, and air mass of the cylinder were obtained. In order to verify the accuracy of the mathematical model, the experiments were conducted. Moreover, performance analysis was introduced to design compressed air engine. Results show that, firstly, the simulation results have good consistency with the experimental results. Secondly, under different intake pressures, the highest output power is obtained when the crank speed reaches 500 rpm, which also provides the maximum output torque. Finally, higher energy utilization efficiency can be obtained at the lower speed, intake pressure, and valve duration angle. This research can refer to the design of the camless valve of compressed air engine.