RESUMEN
FeCo thin films with high saturation magnetization (4 πMs) can be applied in high-frequency electronic devices such as thin film inductors and microwave noise suppressors. However, due to its large magnetocrystalline anisotropy constant and magnetostrictive coefficient of FeCo, the coercivity (Hc) of FeCo films is generally high, which is detrimental to the soft magnetic properties. Meanwhile, the thickness and deposition temperature have significant effects on the coercivity and saturation magnetization of FeCo films. In this paper, FeCo thin films with different thicknesses were prepared by magnetron sputtering at different temperatures. The effects of thickness and deposition temperature on the microstructure and magnetic properties of FeCo thin films were systematically studied. When the film thickness increases from 50 nm to 800 nm, the coercivity would decrease from 309 Oe to 160 Oe. However, the saturation magnetization decreases from 22.1 kG to 15.3 kG. After that, we try to further increase the deposition temperature from room temperature (RT) to 475 °C. It is intriguing to find that the coercivity greatly decreased from 160 Oe to 3 Oe (decreased by 98%), and the saturation magnetization increased from 15.3 kG to 23.5 kG (increased by 53%) for the film with thickness of 800 nm. For the film with thickness of 50 nm, the coercivity also greatly decreased from 309 Oe to 10 Oe (decreased by 96%), but the saturation magnetization did not change significantly. It is contributed to the increase of deposition temperature, which will lead to the increase of grain size and the decrease of the number of grain boundaries. And the coercivity decreases as the number of grain boundaries decreases. Meanwhile, for the thicker films, when increasing the deposition temperature the thermal stress increases, which changes the appearance of (200) texture, and the saturation magnetization increases. Whereas, it has a negligible effect on the orientation of thin films with small thickness (50 nm). This indicates that high-temperature deposition is beneficial to the soft magnetic properties of FeCo thin films, particularly for the films with larger thickness. This FeCo thin film with high saturation magnetization and low coercivity could be an ideal candidate for high-frequency electronic devices.
RESUMEN
PURPOSE: Many studies have shown that chitinase-3-like protein 1 (CHI3L1), also known as YKL-40, is associated with asthma. The purpose of this meta-analysis was to evaluate the role of serum YKL-40 in the diagnosis and differential diagnosis of asthma, severity grading, and determination of disease state. METHODS: The PubMed, Ovid, and Cochrane databases were searched. A total of 17 articles involving 5696 subjects were included in this meta-analysis. RESULTS: The results showed that the level of YKL-40 was significantly higher in asthmatic patients than in the normal group regardless of age and residential location, and increased with severity and acute exacerbation (p < 0.05). YKL-40 levels were significantly different between chronic obstructive pulmonary disease (COPD) and asthma, and also between asthma-COPD overlap syndrome (ACO) and asthma (p < 0.05). CONCLUSION: YKL-40 may act as a potential serological marker for the diagnosis of asthma, assessment of severity, indicator of the disease state, and differential diagnosis of COPD, ACO, and asthma.
