Metal-Organic Frameworks/Heterojunction Structures for Surface-Enhanced Raman Scattering with Enhanced Sensitivity and Tailorability.

Metal-organic frameworks (MOFs), which are composed of crystalline microporous materials with metal ions, have gained considerable interest as promising substrate materials for surface-enhanced Raman scattering (SERS) detection via charge transfer. Research on MOF-based SERS substrates has advanced rapidly because of the MOFs' excellent structural tunability, functionalizable pore interiors, and ultrahigh surface-to-volume ratios. Compared with traditional noble metal SERS plasmons, MOFs exhibit better biocompatibility, ease of operation, and tailorability. However, MOFs cannot produce a sufficient limit of detection (LOD) for ultrasensitive detection, and therefore, developing an ultrasensitive MOF-based SERS substrate is imperative. To the best of our knowledge, this is the first study to develop an MOFs/heterojunction structure as an SERS enhancing material. We report an in situ ZIF-67/Co(OH)2 heterojunction-based nanocellulose paper (nanopaper) plate (in situ ZIF-67 nanoplate) as a device with an LOD of 0.98 nmol/L for Rhodamine 6G and a Raman enhancement of 1.43 × 107, which is 100 times better than that of the pure ZIF-67-based SERS substrate. Further, we extend this structure to other types of MOFs and develop an in situ HKUST-1 nanoplate (with HKUST-1/Cu(OH)2). In addition, we demonstrate that the formation of heterojunctions facilitates efficient photoinduced charge transfer for SERS detection by applying the Mx(OH)y-assisted (where M = Co, Cu, or other metals) MOFs/heterojunction structure. Finally, we successfully demonstrate the application of medicine screening on our nanoplates, specifically for omeprazole. The nanoplates we developed still maintain the tailorability of MOFs and perform high anti-interference ability. Our approach provides customizing options for MOF-based SERS detection, catering to diverse possibilities in future research and applications.

Automatic offline-capable smartphone paper-based microfluidic device for efficient biomarker detection of Alzheimer's disease.

BACKGROUND: Alzheimer's disease (AD) is a prevalent neurodegenerative disease with no effective treatment. Efficient and rapid detection plays a crucial role in mitigating and managing AD progression. Deep learning-assisted smartphone-based microfluidic paper analysis devices (µPADs) offer the advantages of low cost, good sensitivity, and rapid detection, providing a strategic pathway to address large-scale disease screening in resource-limited areas. However, existing smartphone-based detection platforms usually rely on large devices or cloud servers for data transfer and processing. Additionally, the implementation of automated colorimetric enzyme-linked immunoassay (c-ELISA) on µPADs can further facilitate the realization of smartphone µPADs platforms for efficient disease detection. RESULTS: This paper introduces a new deep learning-assisted offline smartphone platform for early AD screening, offering rapid disease detection in low-resource areas. The proposed platform features a simple mechanical rotating structure controlled by a smartphone, enabling fully automated c-ELISA on µPADs. Our platform successfully applied sandwich c-ELISA for detecting the ß-amyloid peptide 1-42 (Aß 1-42, a crucial AD biomarker) and demonstrated its efficacy in 38 artificial plasma samples (healthy: 19, unhealthy: 19, N = 6). Moreover, we employed the YOLOv5 deep learning model and achieved an impressive 97 % accuracy on a dataset of 1824 images, which is 10.16 % higher than the traditional method of curve-fitting results. The trained YOLOv5 model was seamlessly integrated into the smartphone using the NCNN (Tencent's Neural Network Inference Framework), enabling deep learning-assisted offline detection. A user-friendly smartphone application was developed to control the entire process, realizing a streamlined "samples in, answers out" approach. SIGNIFICANCE: This deep learning-assisted, low-cost, user-friendly, highly stable, and rapid-response automated offline smartphone-based detection platform represents a good advancement in point-of-care testing (POCT). Moreover, our platform provides a feasible approach for efficient AD detection by examining the level of Aß 1-42, particularly in areas with low resources and limited communication infrastructure.

A SERS nanocellulose-paper-based analytical device for ultrasensitive detection of Alzheimer's disease.

BACKGROUND: Alzheimer's disease (AD), one of the most prevalent neurodegenerative diseases, results in severe cognitive decline and irreversible memory loss. Early detection of AD is significant to patients for personalized intervention since effective cure and treatment methods for AD are still lacking. Despite the severity of the disease, existing highly sensitive AD detection methods, including neuroimaging and brain deposit-positive lesion tests, are not suitable for screening purposes due to their high cost and complicated operation. Therefore, these methods are unsuitable for early detection, especially in low-resource settings. Although regular paper-based microfluidics are cost-efficient for AD detection, they are restricted by a poor limit of detection (LOD). RESULTS: To address the above limitations, we report the ultrasensitive and low-cost nanocellulose paper (nanopaper)-based analytical microfluidic devices (NanoPADs) for detecting one of the promising AD blood biomarkers (glial fibrillary acidic protein, GFAP) using Surface-enhanced Raman scattering (SERS) immunoassay. Nanopaper offers advantages as a SERS substrate, such as an ultrasmooth surface, high optical transparency, and tunable chemical properties. We detected the target GFAP in artificial serum, achieving a LOD of 150 fg mL-1. SIGNIFICANCE: The developed NanoPADs are distinguished by their cost-efficiency and ease of implementation, presenting a promising avenue for effective early detection of AD's GFAP biomarker with ultrahigh sensitivity. More importantly, our work provides the experimental routes for SERS-based immunoassay of biomarkers on NanoPADs for various diseases in the future.

The novel angiotensin-I-converting enzyme inhibitory peptides from Scomber japonicus muscle protein hydrolysates: QSAR-based screening, molecular docking, kinetic and stability studies.

Food-derived angiotensin-converting enzyme-inhibitory (ACE-I) peptides have attracted extensive attention. Herein, the ACE-I peptides from Scomber japonicus muscle hydrolysates were screened, and their mechanisms of action and inhibition stability were explored. The quantitative structure-activity relationship (QSAR) model based on 5z-scale metrics was developed to rapidly screen for ACE-I peptides. Two novel potential ACE-I peptides (LTPFT, PLITT) were predicted through this model coupled with in silico screening, of which PLITT had the highest activity (IC50: 48.73 ± 7.59 µM). PLITT inhibited ACE activity with a mixture of non-competitive and competitive mechanisms, and this inhibition mainly contributed to the hydrogen bonding based on molecular docking study. PLITT is stable under high temperatures, pH, glucose, and NaCl. The zinc ions (Zn2+) and copper ions (Cu2+) enhanced ACE-I activity. The study suggests that the QSAR model is effective in rapidly screening for ACE-I inhibitors, and PLITT can be supplemented in foods to lower blood pressure.

Cellulose Nanostructures as Tunable Substrates for Nanocellulose-Metal Hybrid Flexible Composites.

Nanocomposite represents the backbone of many industrial fabrication applications and exerts a substantial social impact. Among these composites, metal nanostructures are often employed as the active constituents, thanks to their various chemical and physical properties, which offer the ability to tune the application scenarios in thermal management, energy storage, and biostable materials, respectively. Nanocellulose, as an emerging polymer substrate, possesses unique properties of abundance, mechanical flexibility, environmental friendliness, and biocompatibility. Based on the combination of flexible nanocellulose with specific metal fillers, the essential parameters involving mechanical strength, flexibility, anisotropic thermal resistance, and conductivity can be enhanced. Nowadays, the approach has found extensive applications in thermal management, energy storage, biostable electronic materials, and piezoelectric devices. Therefore, it is essential to thoroughly correlate cellulose nanocomposites' properties with different metallic fillers. This review summarizes the extraction of nanocellulose and preparation of metal modified cellulose nanocomposites, including their wide and particular applications in modern advanced devices. Moreover, we also discuss the challenges in the synthesis, the emerging designs, and unique structures, promising directions for future research. We wish this review can give a valuable overview of the unique combination and inspire the research directions of the multifunctional nanocomposites using proper cellulose and metallic fillers.

Production of hispidin polyphenols from medicinal mushroom Sanghuangporus vaninii in submerged cultures.

Objective: The medicinal mushroom Sanghuangporus vaninii produces pharmaceutically valuable hispidin polyphenols in natural habitats. However, due to the slow growth in nature, S. vaninii grown in the field (sclerotia) is not reliable for pharmaceutical purposes. Although higher biomass of fungal mycelia can be obtained in submerged cultures, the accumulation of hispidin polyphenols is rare. Methods: In this study, the polyunsaturated fatty acids (PUFAs), linoleic acid (LA), linolenic acid (ALA), and methyl jasmonate (MeJa) were employed as the stimulant agents to coordinate the accumulation of biomass and hispidin polyphenols in its submerged cultures. Results: The addition of LA and ALA promoted the mycelial accumulation, while the addition of MeJa inhibited the growth of S. vaninii concomitant with reduced total polyphenols. UPLC-Triple-TOF-MS analysis revealed an increased production of hispidin, phellinstatin, pinnilidine, and its derivatives upon the addition of LA and ALA, and hypholomine B and its isomer, 3,14'-bihispidinyl, and phelligridin E upon the addition of MeJa on day 13. Intriguingly, total polyphenols from the MeJa-supplementing cultures harbored a high capacity in scavenging free radicals. Chemical structural analysis showed that hispidin polyphenols had higher antioxidant activity due to more hispidin moieties induced by MeJa. Conclusion: The supplement of PUFAs affects the synthesis and composition of hispidin polyphenols in S. vaninii. Our results provide a possibility to coordinate the production of hispidin polyphenols via submerged cultures of S. vaninii.

Microembossing: A Convenient Process for Fabricating Microchannels on Nanocellulose Paper-Based Microfluidics.

Nanopaper, derived from nanofibrillated cellulose, has generated considerable interest as a promising material for microfluidic applications. Its appeal lies in a range of excellent qualities, including an exceptionally smooth surface, outstanding optical transparency, a uniform nanofiber matrix with nanoscale porosity, and customizable chemical properties. Despite the rapid growth of nanopaper-based microfluidics, the current techniques used to create microchannels on nanopaper, such as 3D printing, spray coating, or manual cutting and assembly, which are crucial for practical applications, still possess certain limitations, notably susceptibility to contamination. Furthermore, these methods are restricted to the production of millimeter-sized channels. This study introduces a straightforward process that utilizes convenient plastic micro-molds for simple microembossing operations to fabricate microchannels on nanopaper, achieving a minimum width of 200 µm. The developed microchannel outperforms existing approaches, achieving a fourfold improvement, and can be fabricated within 45 min. Furthermore, fabrication parameters have been optimized, and a convenient quick-reference table is provided for application developers. The proof-of-concept for a laminar mixer, droplet generator, and functional nanopaper-based analytical devices (NanoPADs) designed for Rhodamine B sensing using surface-enhanced Raman spectroscopy was demonstrated. Notably, the NanoPADs exhibited exceptional performance with improved limits of detection. These outstanding results can be attributed to the superior optical properties of nanopaper and the recently developed accurate microembossing method, enabling the integration and fine-tuning of the NanoPADs.

Leaf nitrogen and phosphorus stoichiometry of the halophytes across China.

Halophytes play a crucial role in the ecological restoration of saline and alkaline land and hold promising benefits to food security in China. Although a variety of aspects of halophytes have been extensively addressed, there is still a lack of overall understanding of the leaf nitrogen (N) and phosphorus (P) stoichiometric characteristics, especially at a national scale. We compiled a national dataset of 311 observations from 113 sampling sites across China to explore the changing trends and influencing factors on leaf N and P concentrations, and N:P ratio of halophytes. The results showed that leaf N concentration decreased significantly with increasing latitude (LAT), which was mainly driven by the mean annual temperature (MAT) and mean annual precipitation (MAP). The leaf P concentration increased remarkably with increasing longitude (LON), which was induced by the variation in soil total P (TP) content. The leaf N:P ratio increased as LAT increased and LON decreased, which was potentially regulated by the MAT, MAP, and soil TP content. The scaling exponents of the N-P relationship differed significantly among halophyte types and were 0.40, 0.87, and 1.39 for euhalophyte, pseudohalophyte, and recretohalophyte, respectively. The leaf N concentration exhibited significant differences among ecosystem types and halophyte types, whereas the leaf P concentration and N:P ratio remained relatively stable. In summary, the leaf N concentration and N-P scaling exponent might be the classification criteria for halophyte types from the perspective of plant nutrient resource allocation. Moreover, this study characterized the spatial distribution and allocation strategy of leaf N and P stoichiometry in halophytes by data integration analysis, providing the basic information for nutrient management in the processes of the future domestication and introduction of halophytes.

Correlation analysis of lipid accumulation index, triglyceride-glucose index and H-type hypertension and coronary artery disease.

Objective: The current research was designed to explore the relationship between the lipid accumulation index (LAP), coronary artery disease (CAD), and the triglyceride-glucose (TyG) index in patient with H-type hypertension. Methods: From June 2021 to January 2022, our hospital's information management system collected data on 186 patients with essential hypertension. The participants were categorized into two groups (H-type hypertension (n = 113) and non-H-type hypertension (n = 73)) based on their homocysteine levels. Both groups' general condition, lipid accumulation index, triglyceride-glucose index, and Gensini score were compared to determine the factors influencing the severity of CAD in H-type hypertension patients. Results: There were statistically significant differences (P < 0.05) in homocysteine (Hcy, GLP-1 and SAA) level, LAP, and TyG indexes, but not in body mass index (BMI), smoking, sex, age, total cholesterol (TC), triglyceride (TG), high-density lipoprotein cholesterol (HDL-C), fasting plasma glucose (FPG), diastolic blood pressure, and systolic blood pressure. Additionally, there were substantial variations between the two groups regarding the number of lesion branches, degree of stenosis, and Gensini score (P > 0.05). patient with grade III to IV lesions had substantially higher LAP and TyG indices than those with stage I to II (P < 0.05). TyG (OR = 2.687) and TyG-LAP (OR = 4.512) were the factors determining the incidence of coronary artery disease in H-type hypertension, according to multivariate logistic regression analysis. The lesion number, stenosis degree, and Gensini score (P < 0.05) varied among both groups. LAP and TyG indexes were substantially greater in patients with double and triple vessel lesions than in those without lesions or with single vessel lesions (P < 0.05); similarly, these two indexes were considerably higher in individuals with grade III to IV lesions than in patients with grade I to II lesions (P < 0.05). As per the Pearson correlation analysis, the LAP, TyG indices and SAAlevel were adversely connected to the Gensini score (r = 0.254, 0.262, 0.299, P < 0.05), the GLP-1 level was negatively correlated to the Gensini score (r = -0.291, P < 0.05). TyG (OR = 2.687) and TyG-LAP (OR = 4.512) were the factors determining the frequency of coronary artery disease in H-type hypertension, according to multivariate logistic regression analysis. Conclusion: In conclusion, the LAP and TyG indexes were observed to be closely related to the degree of CAD in H-type individuals with hypertension, which can better understand the pathogenesis of coronary artery disease in patients with H-type hypertension and is of great significance for guiding clinical doctors to carry out personalized treatment and management.

Microfluidic-Assisted Caenorhabditis elegans Sorting: Current Status and Future Prospects.

Caenorhabditis elegans (C. elegans) has been a popular model organism for several decades since its first discovery of the huge research potential for modeling human diseases and genetics. Sorting is an important means of providing stage- or age-synchronized worm populations for many worm-based bioassays. However, conventional manual techniques for C. elegans sorting are tedious and inefficient, and commercial complex object parametric analyzer and sorter is too expensive and bulky for most laboratories. Recently, the development of lab-on-a-chip (microfluidics) technology has greatly facilitated C. elegans studies where large numbers of synchronized worm populations are required and advances of new designs, mechanisms, and automation algorithms. Most previous reviews have focused on the development of microfluidic devices but lacked the summaries and discussion of the biological research demands of C. elegans, and are hard to read for worm researchers. We aim to comprehensively review the up-to-date microfluidic-assisted C. elegans sorting developments from several angles to suit different background researchers, i.e., biologists and engineers. First, we highlighted the microfluidic C. elegans sorting devices' advantages and limitations compared to the conventional commercialized worm sorting tools. Second, to benefit the engineers, we reviewed the current devices from the perspectives of active or passive sorting, sorting strategies, target populations, and sorting criteria. Third, to benefit the biologists, we reviewed the contributions of sorting to biological research. We expect, by providing this comprehensive review, that each researcher from this multidisciplinary community can effectively find the needed information and, in turn, facilitate future research.

Facile Microembossing Process for Microchannel Fabrication for Nanocellulose-Paper-Based Microfluidics.

Nanofibrillated cellulose paper (nanopaper) has gained growing interest as one promising substrate material for paper-based microfluidics, thanks to its ultrasmooth surface, high optical transparency, uniform nanofiber matrix with nanoscale porosity, and tunable chemical properties. Recently, research on nanopaper-based microfluidics has quickly advanced; however, the current technique of patterning microchannels on nanopaper (i.e., 3D printing, spray coating, or manual cutting and sticking), that is fundamental for application development, still has some limitations, such as ease-of-contamination, and more importantly, only enabling millimeter-scale channels. This paper reports a facile process that leverages the simple operations of microembossing with the convenient plastic micro-molds, for the first time, patterning nanopaper microchannels downing to 200 µm, which is 4 times better than the existing methods and is time-saving (<45 mins). We also optimized the patterning parameters and provided one quick look-up table as the guideline for application developments. As proof-of-concept, we first demonstrated two fundamental microfluidic devices on nanopaper, the laminar-mixer and droplet generator, and two functional nanopaper-based analytical devices (NanoPADs) for glucose and Rhodamine B (RhB) sensing based on optical colorimetry and surface-enhanced Raman spectroscopy, respectively. The two NanoPADs showed outstanding performance with low limits of detection (2 mM for glucose and 19fM for RhB), which are 1.25× and 500× fold improvement compared to the previously reported values. This can be attributed to our newly developed highly accurate microchannel patterning process that enables high integration and fine-tunability of the NanoPADs along with the superior optical properties of nanopaper.

Identification of a novel LATS1 variant associated with familial cerebral cavernous malformations in a Chinese family.

BACKGROUND: Cerebral cavernous malformations (CCMs) are common sporadic or hereditary vascular malformations in the central nervous system. CCM1-3 variants have been identified that are associated with the majority of familial cerebral cavernous malformations (FCCMs). However, there are still a few CCM1-3 wild-type FCCMs. The aim of the present study was to identify an additional pathogenic variant of FCCMs. METHODS: In this study, a large five-generation Chinese Han family affected by CCMs was recruited. Magnetic resonance imaging (MRI) was done for the detection of CCMs. Whole-exome sequencing (WES) was performed, and the identified variants were co-segregation analyzed by Sanger sequencing. The function of candidate variants was predicted in silico and experimental validated by angiogenesis assay in human umbilical vein endothelial cells (HUVECs) in vitro. RESULTS: Twenty-four family members and one healthy spouse were enrolled. We found that CCMs were exhibited on MRI in nine family members. Overall, twenty-seven candidate variants were identified using WES, and no CCM1-3 variants were detected. The missense variant in LATS1 (c.821C > T, p.Thr274Ile) was verified to be associated with the clinical and pathological phenotype of FCCMs. CONCLUSION: Our findings indicated that the LATS1 variant could be a potential pathogenic factor for FCCMs in this Chinese family.

DCAU-Net: dense convolutional attention U-Net for segmentation of intracranial aneurysm images.

Segmentation of intracranial aneurysm images acquired using magnetic resonance angiography (MRA) is essential for medical auxiliary treatments, which can effectively prevent subarachnoid hemorrhages. This paper proposes an image segmentation model based on a dense convolutional attention U-Net, which fuses deep and rich semantic information with shallow-detail information for adaptive and accurate segmentation of MRA-acquired aneurysm images with large size differences. The U-Net model serves as a backbone, combining dense block and convolution block attention module (CBAM). The dense block is composed of a batch normalization layer, an randomly rectified linear unit activation function, and a convolutional layer, for mitigation of vanishing gradients, for multiplexing of aneurysm features, and for improving the network training efficiency. The CBAM is composed of a channel attention module and a spatial attention module, improving the segmentation performance of feature discrimination and enhancing the acquisition of key feature information. Owing to the large variation of aneurysm sizes, multi-scale fusion is performed during up-sampling, for adaptive segmentation of MRA-acquired aneurysm images. The model was tested on the MICCAI 2020 ADAM dataset, and its generalizability was validated on the clinical aneurysm dataset (aneurysm sizes: < 3 mm, 3-7 mm, and > 7 mm) supplied by the Affiliated Hospital of Qingdao University. A good clinical application segmentation performance was demonstrated.

The cancer-testis lncRNA lnc-CTHCC promotes hepatocellular carcinogenesis by binding hnRNP K and activating YAP1 transcription.

Cancer-testis (CT) genes participate in the initiation and progression of cancer, but the role of CT-associated long non-coding RNAs (CT-lncRNAs) in hepatocellular carcinoma (HCC) is still elusive. Here, we discovered a conserved CT-lncRNA, named lnc-CTHCC, which was highly expressed in the testes and HCC. A lnc-CTHCC-knockout (KO) mouse model further confirmed that the global loss of lnc-CTHCC inhibited the occurrence and development of HCC. In vitro and in vivo assays also showed that lnc-CTHCC promoted HCC growth and metastasis. Mechanistically, lnc-CTHCC bound to heterogeneous nuclear ribonucleoprotein K (hnRNP K), which was recruited to the YAP1 promoter for its activation. Additionally, the N6-methyladenosine (m6A) modification was mediated by N6-adenosine-methyltransferase 70-kDa subunit (METTL3) and recognized by insulin-like growth factor 2 mRNA-binding protein 1 (IGF2BP1)/IGF2BP3, which maintained lnc-CTHCC stability and increased its expression in HCC. Together, our results show that lnc-CTHCC directly binds to hnRNP K and promotes hepatocellular carcinogenesis and progression by activating YAP1 transcription, suggesting that lnc-CTHCC is a potential biomarker and therapeutic target of HCC.

Hypomethylation-activated cancer-testis gene LIN28B promotes cell proliferation and metastasis in gastric cancer.

BACKGROUND: Previous studies have revealed the significance of several cancer/testis (CT) genes in gastric cancer (GC). Here, we identified candidate CT oncogenes in GC, which were activated by the promoter (p) hypomethylation. METHODS: Transcriptome profiling and DNA methylation data of stomach adenocarcinoma (STAD) were downloaded from The Cancer Genome Atlas (TCGA) database. We applied multiple Cox regression analysis to identify survival-related CT genes. CpG sites associated with hypomethylated activation were defined by Spearman's rank correlation analysis. We used the CRISPR/dCas9 technique to accurately mediate p hypomethylation in a GC cell line (HGC27) and verify the effect of targeted CpG sites on gene expression. Finally, we verified the function via gain- and loss-of-function assays in vitro. RESULTS: We recognized LIN28B as a highly activated CT gene in GC, whose high expression was associated with poor prognosis of GC patients [hazard ratio (HR) = 1.90, 95 %CI:1.26-2.87, P = 2.14 × 10-3]. Bioinformatics analysis found that hypomethylation of four CpG sites at LIN28B p were negatively correlated with its elevated expression, and we verified that p hypomethylation could activate LIN28B expression via accurately mediated p methylation. Moreover, knockout of LIN28B markedly repressed proliferation, metastasis, and invasion of GC cells in vitro. In contrast, LIN28B over-expression could promote metastasis and invasion of GC cells. CONCLUSION: In summary, we found that CT gene LIN28B could be activated by p hypomethylation in GC, which suggested that hypomethylation of specific CpG sites could be a potential molecular marker for prognosis prediction and individualized treatment among GC patients.

Methane dynamics from a mixed plantation of north China: Observation using closed-path eddy covariance method.

Although an important greenhouse gas, methane flux in hilly forest ecosystems remains unclear. By using closed-path eddy covariance systems, methane flux was measured continuously from 2017 to 2019 in a mixed plantation in the Xiaolangdi area of the Yellow River in North China. The methane flux footprint and its diurnal and monthly variations were analysed, and its characteristics on rainy days are discussed. The results showed that: (a) the observation data were reliable with good spatial representation (b) The methane flux in the mixed plantation ecosystem had obvious diurnal and seasonal variations: the monthly average diurnal variation of the methane flux had a single-peak; the methane flux value was source in the daytime and sink at night. The daily mean maximum value of methane flux in growing season was lower than that in non-growing season with the maximum value appearing in March, and the minimum value in October. (c) The forest is an atmospheric CH4 source with the annual emission in 2017 of (3.31 g C·m-2·year -1) >2019 (2.94 g C·m-2·year-1) >2018 (2.81 g C·m-2·year -1), and the main influencing factor was precipitation. Rainfall affected CH4 flux with a lag period of approximately three days. Rainfall also changed the balance of CH4 flux between sink or source according to precipitation intensity and frequency.

Expanding the phenotypic spectrum of mutations in LRP2: a novel candidate gene of non-syndromic familial comitant strabismus.

BACKGROUND: Comitant strabismus (CS) is a heterogeneous disorder that is a major contributing factor to unilateral childhood-onset visual impairment. Studies have confirmed that genetic factors play an important role in the development of CS. The aim of this study was to identify the genetic cause of non-syndromic familial CS. METHODS: Fourteen unrelated CS families were recruited for the study. Twelve affected and 2 unaffected individuals from a large four-generation family (CS08) were selected to perform whole genome-wide linkage analysis. Parallel whole-exome sequencing (WES) was conducted in the same family (9 patients and 1 unaffected member) and 31 additional CS cases from 13 other unrelated families. Sanger sequencing was used to determine whether any of the remaining variants co-segregated with the disease phenotype in the corresponding family. RESULTS: Based on linkage analysis, CS in family CS08 mapped to a novel region of 34.17 centimorgan (cM) on chromosome 2q22.3-2q32.1 between markers D2S151 and D2S364, with a maximum log odds (LOD) score of 3.54 (theta = 0) at D2S142. Parallel WES identified a heterozygous variant, LRP2 c.335 A > G (p.Q112R), located in such a linkage interval that completely co-segregated with the disease in the family. Furthermore, another novel heterozygous variant (c.7274A > G, p.D2425G) in LRP2 that co-segregated was detected in 2 additional affected individuals from another unrelated family by WES. Both variants are predicted to be damaging by PolyPhen-2, SIFT and MutationTaster, and were absent in 100 ethnically matched normal controls. CONCLUSION: LRP2 is a novel candidate genetic cause of non-syndromic familial CS.

Bi-allelic variants in human WDR63 cause male infertility via abnormal inner dynein arms assembly.

Inner dynein arm (IDA), composed of a series of protein complex, is necessary to cilia and flagella bend formation and beating. Previous studies indicated that defects of IDA protein complex result in multiple morphological abnormalities of the sperm flagellum (MMAF) and male infertility. However, the genetic causes and molecular mechanisms in the IDAs need further exploration. Here we identified two loss-of-function variants of WDR63 in both MMAF and non-obstructive azoospermia (NOA) affected cohorts. WDR63 encodes an IDA-associated protein that is dominantly expressed in testis. We next generated Wdr63-knockout (Wdr63-KO) mice through the CRISPR-Cas9 technology. Remarkably, Wdr63-KO induced decreased sperm number, abnormal flagellar morphology and male infertility. In addition, transmission electron microscopy assay showed severely disorganized "9 + 2" axoneme and absent inner dynein arms in the spermatozoa from Wdr63-KO male mice. Mechanistically, we found that WDR63 interacted with WDR78 mainly via WD40-repeat domain and is necessary for IDA assembly. Furthermore, WDR63-associated male infertility in human and mice could be overcome by intracytoplasmic sperm injection (ICSI) treatment. In conclusion, the present study demonstrates that bi-allelic variants of WDR63 cause male infertility via abnormal inner dynein arms assembly and flagella formation and can be used as a genetic diagnostic indicator for infertility males.

Bioactive components and mechanisms of poplar propolis in inhibiting proliferation of human hepatocellular carcinoma HepG2 cells.

BACKGROUND: The aim of this study was to elucidate the bioactive components and anti-tumor mechanism of poplar propolis extract obtained from North China (CP) in human hepatocellular carcinoma HepG2 cells in vitro. METHODS: Cell viability and proliferation were measured by SRB assay and EdU proliferation test kit, respectively. Cell migration was evaluated by scratching test. Reactive oxygen species (ROS) production and mitochondrial membrane potential were investigated with the fluorescent probes, DCHF and JC-1, respectively. The levels of alanine aminotransferase (ALT) and aspartate aminotransferase (AST) were inspected by measurement kits. Apoptosis was assessed by acridine orange (AO) and Hoechst 33258 staining. Levels of Bax, Bcl-2, caspase 9, caspase 3, PARP, MMP-2, MMP-9, PI3K/p-PI3K, AKT/p-AKT, p38MAPK/p-p38 MAPK, ERK/p-ERK, LATS2, YAP, TAZ and TEAD1 were assessed by western blotting, respectively. RESULTS: The bioactive components of CP inhibiting HepG2 cells were mainly flavonoids, and esters. CP induced HepG2 apoptosis through a mitochondrial-dependent intrinsic pathway with elevated the levels of cleaved PARP, cleaved caspase 3, and Bax and decreased the expressions of Bcl-2 and procaspase 9. It seemed that CP triggered apoptosis by activation of the p38 MAPK and inactivation of p-ERK. More importantly, we found that CP suppressed the Hippo pathway, leading to inactivation of YAP/TAZ and TEAD1 and inhibition of PI3K/AKT signaling molecules. CONCLUSION: CP exerted excellent anti-proliferation and pro-apoptosis actions in HepG2 cells by inactivation of the loop between the Hippo/YAP and PI3K/AKT pathways, and may be a promising therapy for HCC.