Lysine-mediated surface modification of cellulose nanocrystal films for multi-channel anti-counterfeiting.

Utilizing advanced multiple channels for information encryption offers a powerful strategy to achieve high-capacity and highly secure data protection. Cellulose nanocrystals (CNCs) offer a sustainable resource for developing information protection materials. In this study, we present an approach that is easy to implement and adapt for the covalent attachment of various fluorescence molecules onto the surface of CNCs using the Mannich reaction in aqueous-based medium. Through the use of the Mannich reaction-based surface modification technique, we successfully achieved multi-color fluorescence in the resulting CNCs. The resulting CNC derivatives were thoroughly characterized by two dimensional heteronuclear single quantum coherence nuclear magnetic resonance (2D HSQC NMR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron (XPS) spectroscopy. Notably, the optical properties of CNCs were well maintained after modification, resulting in films exhibiting blue and red structural colors. This enables the engineering of highly programmable and securely encoded anti-counterfeit labels. Moreover, subsequent coating of the modified CNCs with MXene yielded a highly secure encrypted matrix, offering advanced security and encryption capabilities under ultraviolet, visible, and near-infrared wavelengths. This CNC surface-modification enables the development of multimodal security labels with potential applications across various practical scenarios.

Improving the Monophenolic Yield of Lignin Depolymerization in Dualistic Aprotic Solvent System by Organic Solvent Fractionation.

Converting lignin into aromatic chemicals is a promising strategy for the high-value utilization of lignocellulosic feedstock. However, the inherent heterogeneity of lignin poses a significant obstacle to achieving efficient conversion and optimal product yields within bio-refinery systems. Herein, we employed a one-step fractionation method to enhance lignin homogeneity and utilized the THF/DMSO-EtONa (tetrahydrofuran/dimethyl sulfoxide-sodium ethoxide) system to depolymerize the fractionated lignin. Three protic and three aprotic solvents were used for fractionation. The impact of the solvent properties on the structure and the depolymerization efficiency of the fractionated lignin was investigated. Methanol-fractionated lignin generated the benzoic acid compounds with a yield of 30 wt%, 50 % higher than that of the unfractionated lignin. The polarities (δP), hydrogen bonding abilities (δH), and viscosities (η) of selected protic solvents showed strong linear correlation with molecular weight (Mw), polymer dispersity index (PDI), and syringyl/guaiacyl ratio (S/G ratio) of the fractionated lignin, as well as the total yield of benzoic acid compounds derived from the ß-O-4 bond cleavage. This study elucidates the relationship between solvent properties and lignin structure and proposes a promising approach for refining lignin to enhance utilization efficiency, thereby presenting a potential strategy for value-added application of complex lignin polymers.

CRISPR/Cas9 mutated p-coumaroyl shikimate 3'-hydroxylase 3 gene in Populus tomentosa reveals lignin functioning on supporting tree upright.

The lignin plays one of the most important roles in plant secondary metabolism. However, it is still unclear how lignin can contribute to the impressive height of wood growth. In this study, C3'H, a rate-limiting enzyme of the lignin pathway, was used as the target gene. C3'H3 was knocked out by CRISPR/Cas9 in Populus tomentosa. Compared with wild-type popular trees, c3'h3 mutants exhibited dwarf phenotypes, collapsed xylem vessels, weakened phloem thickening, decreased hydraulic conductivity and photosynthetic efficiency, and reduced auxin content, except for reduced total lignin content and significantly increased H-subunit lignin. In the c3'h3 mutant, the flavonoid biosynthesis genes CHS, CHI, F3H, DFR, ANR, and LAR were upregulated, and flavonoid metabolite accumulations were detected, indicating that decreasing the lignin biosynthesis pathway enhanced flavonoid metabolic flux. Furthermore, flavonoid metabolites, such as naringenin and hesperetin, were largely increased, while higher hesperetin content suppressed plant cell division. Thus, studying the c3'h3 mutant allows us to deduce that lignin deficiency suppresses tree growth and leads to the dwarf phenotype due to collapsed xylem and thickened phloem, limiting material exchanges and transport.

Synergy of Single Atoms and Lewis Acid Sites for Efficient and Selective Lignin Disassembly into Monolignol Derivatives.

Lignin is the most abundant aromatic polymer from the natural and renewable lignocellulosic biomass resource. Developing highly efficient catalysts for lignin depolymerization to produce valuable monophenols with high yield and selectivity remains a desirable but challenging target in this field. Here, we design a synergistic catalyst combining atomically dispersed Mo centers and Al Lewis acid sites on a MgO substrate (Mo1Al/MgO) for the depolymerization of Eucalyptus lignin via the ß-aryl ether bond cleavage. A near-theoretical monophenol yield of 46% with an ultrahigh selectivity of 92% for coniferyl and sinapyl methyl ether, as well as good cycling durability, was achieved simultaneously by Mo1Al/MgO in an inert N2 atmosphere. First-principles calculations and control catalytic experiments confirmed the synergistic catalysis mechanism between Mo1-O5 single-atom centers and the neighboring Al Lewis acid sites with the participation of a methanol solvent. This study validates the feasibility of designing better-performing catalysts with synergistic multiactive sites for the efficient and selective disassembly of complex renewable biopolymers into highly value-added products with lower cost and greater security.

Bio-inspired synthesis of amino acids modified sulfated cellulose nanofibrils into multivalent viral inhibitors via the Mannich reaction.

Virus cross-infection via surfaces poses a serious threat to public health. Inspired by natural sulfated polysaccharides and antiviral peptides, we prepared multivalent virus blocking nanomaterials by introducing amino acids to sulfated cellulose nanofibrils (SCNFs) via the Mannich reaction. The antiviral activity of the resulting amino acid-modified sulfated nanocellulose was significantly improved. Specifically, 1 h treatment with arginine modified SCNFs at a concentration of 0.1 g/mL led to a complete inactivation of the phage-X174 (reduction by more than three orders of magnitude). Atomic force microscope showed that amino acid-modified sulfated nanofibrils can bind phage-X174 to form linear clusters, thus preventing the virus from infecting the host. When we coated wrapping paper and the inside of a face-mask with our amino acid-modified SCNFs, phage-X174 was completely deactivated on the coated surfaces, demonstrating the potential of our approach for use in the packaging and personal protective equipment industries. This work provides an environmentally friendly and cost-efficient approach to fabricating multivalent nanomaterials for antiviral applications.

Synthetic Lignin-Derived Therapeutic Nano Reagent as Intestinal pH-Sensitive Drug Carriers Capable of Bypassing the Gastric Acid Environment for Colitis Treatment.

Oral drug delivery is a common route for management of inflammatory bowel disease (IBD) but suffers from low bioavailability and systemic side effects during passage through the alimentary canal. Here, we present a therapeutic nano reagent of a ferulic acid-derived lignin nanoparticle (FALNP). We showed that FALNP with favorable antioxidant activity can regulate IBD. More importantly, the intestinal pH-responsive degradability of FALNP allows it to withstand the harsh gastric acid environment, bypass physiological barriers, and target the intestine for gastrointestinal delivery. In vivo experiments showed that oral administration of FALNP markedly relieved pathological symptoms in a mouse model of acute colitis by reducing oxidative stress and regulating the gut microbiome. By integrating anti-inflammatory medicine, FALNP also can be used as a bioactive carrier to exert a potent synergistic therapeutic effect. In addition to colitis, FALNP can be readily adaptable for use as a carrier platform for therapy of many other intestinal diseases.

Nanolignin-based high internal phase emulsions for efficient protection of curcumin against UV degradation.

As an emulsifier, lignin exhibits excellent UV resistance on drug-loaded emulsion systems for drug delivery. However, due to the structural variation and complexity of lignins from various origins, their UV shielding performance varies with the techniques for lignin extraction, which impacts properties and the protection efficiency of lignin-based HIPEs (high internal phase emulsions). In this work, lignin nanoparticles, prepared from three lignin preparations of Eucalyptus, were used in HIPEs delivery systems to protect curcumin from degradation by UV radiation. Structures of the lignin preparations were characterized using 2D HSQC (heteronuclear single-quantum coherence) NMR (nuclear magnetic resonance), 31P NMR, and GPC (gel permeation chromatography). The residual curcumin level after 36 h UV exposure in the nanolignin-based HIPEs was over 72 %, much higher than that (< 10 % after 24 h UV exposure) in the oil phase without lignin, indicating that the nanolignin-based HIPEs with enhanced UV shielding ability protect curcumin better. Of the three lignin preparations, AL (alkali lignin), with the lowest molecular weight, highest contents of phenolic hydroxyl and carboxyl groups, and highest S/G ratio, displayed the best anti-UV radiation ability and the most uniform nanoparticle size.

Facile preparation of lignin-containing cellulose nanofibrils from sugarcane bagasse by mild soda-oxygen pulping.

Lignin-containing cellulose nanofibrils (LCNFs) with tunable lignin contents from sugarcane bagasse were directly prepared by low-temperature soda­oxygen pulping combined with simple mechanical treatment. The residual lignin structure, morphology and physical dimensions of LCNFs, and properties of the relevant cellulose nanopapers (CNPs) were investigated. In situ 2D Heteronuclear Single Quantum Coherence (HSQC) NMR spectra showed ß-O-4 linkages, ferulate, and para-coumarate were well preserved in the LCNFs. Compared with the cellulose nanofibrils (CNFs), LCNFs displayed a more uniform size and narrow diameter distribution. The corresponding CNPs exhibited outstanding mechanical properties (tensile strength reached 152.9 MPa), and excellent combined optical properties both in the UV blocking and visible light transparency. Moreover, the water contact angles (50.0-80.2°) of LCNFs were much higher than that of CNFs (21.7°). Direct preparation of LCNFs under mild condition would unlock the full potential of cellulosic materials and provide enhanced opportunities for cellulose to fabricate multi-functional and high-value materials.

Isolation, Characterization, and Depolymerization of l-Cysteine Substituted Eucalyptus Lignin.

Lignin condensation reactions are hard to avoid or control during separation, which is a deterrent to lignin isolation and post-conversation, especially for the full utilization of lignocelluloses. Selective protection of ß-aryl ether linkages in the isolation process is crucial to lignin valorization. Herein, a two-step acid/alkali separation method assisted with l-cysteine for eucalyptus lignin separation is developed, and the isolated l-cysteine lignins (LCLs) are comprehensively characterized by 2D NMR, 31P NMR, thioacidolysis, etc. Compared to the two-step control treatment, a much higher ß-O-4 content is preserved without reducing the separation efficiency assisted by l-cysteine, which is also significantly higher than alkali lignin and kraft lignin. The results of hydrogenolysis show that LCLs generate a much higher monomer yield than that of control sample. Structural analysis of LCLs suggests that lignin condensation reaction, to some extent, is suppressed by adding l-cysteine during the two-step acid/alkali separation. Further, mechanistic studies using dimeric model compound reveals that l-cysteine may be the α-carbon protective agent in the two-step separation. The role of l-cysteine in the two-step lignin isolation method provides novel insights to the selective fractionation of lignin from biomass, especially for the full valorization of lignocellulosic biomass.

Naphthalene Structures Derived from Lignins During Phenolation.

Phenolation is a commonly used method to improve the reactivity of lignin for various applications. In this study, resinol lignin models (syringaresinol and pinoresinol) and eucalyptus alkali lignin were treated under acid-catalyzed phenolation conditions to investigate the products derived from resinol (ß-ß) structures of lignins. The phenolation products were characterized by means of GC-MS and NMR spectroscopy following separation using flash chromatography and thin-layer chromatography. A series of new naphthalene products were identified from phenolation of syringaresinol, and the corresponding guaiacyl analogs were also identified by GC-MS. The C1-Cα bond of these resinol compounds was cleaved to release syringol or guaiacol during phenolation. In addition, diphenylmethane products formed from phenol or phenol and syringol/guaiacol were found in the phenolation products. Comparatively, more naphthalene products were obtained by phenolation from syringaresinol than those obtained from pinoresinol. HSQC NMR characterization of the phenolated alkali lignin revealed that naphthalene structures formed in the phenolated lignin.

The class II KNOX transcription factors KNAT3 and KNAT7 synergistically regulate monolignol biosynthesis in Arabidopsis.

The function of the transcription factor KNOTTED ARABIDOPSIS THALIANA7 (KNAT7) is still unclear since it appears to be either a negative or a positive regulator for secondary cell wall deposition with its loss-of-function mutant displaying thicker interfascicular and xylary fiber cell walls but thinner vessel cell walls in inflorescence stems. To explore the exact function of KNAT7, class II KNOTTED1-LIKE HOMEOBOX (KNOX II) genes in Arabidopsis including KNAT3, KNAT4, and KNAT5 were studied together. By chimeric repressor technology, we found that both KNAT3 and KNAT7 repressors exhibited a similar dwarf phenotype. Both KNAT3 and KNAT7 genes were expressed in the inflorescence stems and the knat3 knat7 double mutant exhibited a dwarf phenotype similar to the repressor lines. A stem cross-section of knat3 knat7 displayed an enhanced irregular xylem phenotype as compared with the single mutants, and its cell wall thickness in xylem vessels and interfascicular fibers was significantly reduced. Analysis of cell wall chemical composition revealed that syringyl lignin was significantly decreased while guaiacyl lignin was increased in the knat3 knat7 double mutant. Coincidently, the knat3 knat7 transcriptome showed that most lignin pathway genes were activated, whereas the syringyl lignin-related gene Ferulate 5-Hydroxylase (F5H) was down-regulated. Protein interaction analysis revealed that KNAT3 and KNAT7 can form a heterodimer, and KNAT3, but not KNAT7, can interact with the key secondary cell wall formation transcription factors NST1/2, which suggests that the KNAT3-NST1/2 heterodimer complex regulates F5H to promote syringyl lignin synthesis. These results indicate that KNAT3 and KNAT7 synergistically work together to promote secondary cell wall biosynthesis.

Structural insights into the alkali lignins involving the formation and transformation of arylglycerols and enol ethers.

Soda process is one of the most important pulping processes in paper industry producing large quantities of alkali lignins that can afford plenty of biofuels, aromatic chemicals and materials. However, the structural and size-related heterogeneities and complexities hinder the development in these directions. Herein, we report new insights into the structure of alkali lignin, through investigating the formation and transformation of enol ether and arylglycerol structures that are significant responsible for the structural transformation from native lignin to alkali lignin. Four-type enol ethers composed of G/S units in hardwood alkali lignin were identified by 2D HSQC NMR. A series of alkali lignins prepared by alkali treatment of eucalyptus cellulolytic enzyme lignin under various temperatures were analyzed by 2D HSQC NMR, 31P NMR and gel permeation chromatography (GPC). Upon these analyses and related model compound studies, it was found that the arylglycerols formed from native ß-O-4 linkages tends to be oxidized with the further degradation of aryl ether bonds, and that the enol ether linkages are facile to be hydrolyzed or oxidized in the air. These insights improve the mechanistic understanding for the structural evolution and the diversity of alkali lignins and will aid the development of further lignin valorization strategies.

Revealing Structural Modifications of Lignin in Acidic γ-Valerolactone-H2O Pretreatment.

γ-valerolactone (GVL)/H2O/acid solvent mixtures has been used in chemical pretreatment of lignocellulosic biomass, it was claimed that GVL lignins were structurally close to proto (native) lignins, or having low molecular weight with narrow polydispersity, however, the structural changes of GVL lignins have not been investigated. In this study, ß-O-4 (ß-aryl ether, GG), ß-5 (phenylcoumaran), and ß-ß (resinol) lignin model compounds were treated by an acidic GVL-H2O solvent system, a promising pretreatment of lignocellulose for biomass utilization, to investigate the structural changes possibly related to the lignin involved. NMR characterization of the products isolated from the treated GG indicated that a phenyl dihydrobenzofuran, having typical C-H correlations at δC/δH 50.74/4.50 and 93.49/4.60 ppm in its HSQC spectrum, was produced from GG. In the pretreatment, the released formaldehyde from GG reacted fast with GG to form a novel 1,3-dioxane intermediate whose characteristic HSQC signals were: δC/δH 94.15-94.48/4.81-5.18 ppm and 80.82-83.34/4.50-4.94 ppm. The ß-5 model, dihydrodehydrodiconiferyl alcohol, was converted into phenylcoumarone and stilbene having benzaldehyde that resulted from the allyl alcohol side chain. The ß-ß model, syringaresinol, was isomerized to form a mixture of syringaresinol, epi-, and dia-syringaresinol although being degraded slightly.

Structural features of alternative lignin monomers associated with improved digestibility of artificially lignified maize cell walls.

Plant biologists are seeking new approaches for modifying lignin to improve the digestion and utilization of structural polysaccharides in crop cultivars for the production of biofuels, biochemicals, and livestock. To identify promising targets for lignin bioengineering, we artificially lignified maize (Zea mays L.) cell walls with normal monolignols plus 21 structurally diverse alternative monomers to assess their suitability for lignification and for improving fiber digestibility. Lignin formation and structure were assessed by mass balance, Klason lignin, acetyl bromide lignin, gel-state 2D-NMR and thioacidolysis procedures, and digestibility was evaluated with rumen microflora and from glucose production by fungal enzymes following mild acid or base pretreatments. Highly acidic or hydrophilic monomers proved unsuitable for lignin modification because they severely depressed cell wall lignification. By contrast, monomers designed to moderately alter hydrophobicity or introduce cleavable acetal, amide, or ester functionalities into the polymer often readily formed lignin, but most failed to improve digestibility, even after chemical pretreatment. Fortunately, several types of phenylpropanoid derivatives containing multiple ester-linked catechol or pyrogallol units were identified as desirable genetic engineering targets because they readily formed wall-bound polymers and improved digestibility, presumably by blocking cross-linking of lignin to structural polysaccharides and promoting lignin fragmentation during mild acidic and especially alkaline pretreatment.

Promoting the material properties of xylan-type hemicelluloses from the extraction step.

Using originally isolated xylan-type hemicelluloses for material application suffers from poor mechanical properties including low tensile strength and brittleness. The subsequent chemical modifications of hemicelluloses are facing the problems of high costs and toxic chemicals. Consequently, this study tried to investigate the factors affecting the film-forming properties of the originally isolated xylan-hemicelluloses and promoting their material properties from the extraction step. Two different extraction methods, a one-step alkali or alkaline peroxide solution method and a two-step alkali extraction-delignification method were used to extract the hemicellulose with different chemical structures from sugarcane bagasse. For the two-step alkali extraction-delignification method, hemicelluloses were first extracted by alkali solution and then delignified by dioxane/water, hydrogen peroxide solution or sodium hypochlorite solution. The lignin contents of all the extracted hemicelluloses ranged from 1.6%-9.5%, of which the lowest value was obtained through delignification by sodium hypochlorite. The number average molecular weight ranged from 8200 to 26800, while the xylan/arabinan ratio ranged from 5.0 to 9.1. The hemicelluloses were characterized and processed into films. Tensile strength of films could be considerably improved up to ˜52% when using sodium hypochlorite solution as the delignification agents and the lignin content was greatly reduced for the hemicellulose fraction. Statistical models were generated between film mechanical properties and hemicellulose structural characteristics. The models predicted that hemicellulose with higher molecular weight, more linear structure and lower lignin content would result in better mechanical properties.

An "ideal lignin" facilitates full biomass utilization.

Lignin, a major component of lignocellulosic biomass, is crucial to plant growth and development but is a major impediment to efficient biomass utilization in various processes. Valorizing lignin is increasingly realized as being essential. However, rapid condensation of lignin during acidic extraction leads to the formation of recalcitrant condensed units that, along with similar units and structural heterogeneity in native lignin, drastically limits product yield and selectivity. Catechyl lignin (C-lignin), which is essentially a benzodioxane homopolymer without condensed units, might represent an ideal lignin for valorization, as it circumvents these issues. We discovered that C-lignin is highly acid-resistant. Hydrogenolysis of C-lignin resulted in the cleavage of all benzodioxane structures to produce catechyl-type monomers in near-quantitative yield with a selectivity of 90% to a single monomer.

Structural Characterization of Lignins from Willow Bark and Wood.

Understanding the chemical structure of lignin in willow bark is an indispensable step to design how to separate its fiber bundles. The whole cell wall and enzyme lignin preparations sequentially isolated from ball-milled bark, inner bark, and wood were comparatively investigated by nuclear magnetic resonance (NMR) spectroscopy and three classical degradative methods, i.e., alkaline nitrobenzene oxidation, derivatization followed by reductive cleavage, and analytical thioacidolysis. All results demonstrated that the guaiacyl (G) units were predominant in the willow bark lignin over syringyl (S) and minor p-hydroxyphenyl (H) units. Moreover, the monomer yields and S/G ratio rose progressively from bark to inner bark and wood, indicating that lignin may be more condensed in bark than in other tissues. Additionally, major interunit linkage substructures (ß-aryl ethers, phenylcoumarans, and resinols) together with cinnamyl alcohol end groups were relatively quantitated by two-dimensional NMR spectroscopy. Bark and inner bark were rich in pectins and proteins, which were present in large quantities and also in the enzyme lignin preparations.

Elucidating Tricin-Lignin Structures: Assigning Correlations in HSQC Spectra of Monocot Lignins.

Tricin [5,7-dihydroxy-2-(4-hydroxy-3,5-dimethoxyphenyl)-4H-chromen-4-one] is a flavone that has been found to be incorporated in grass lignin polymers via 4'⁻Oâ»ß coupling. Herein, we investigated the tricin-lignin structure using nuclear magnetic resonance (NMR) methods by comparing the 1H⁻13C heteronuclear correlation (HSQC) NMR spectra of the isolated lignin with a series of dimeric and trimeric tricin-4'⁻O⁻ß-ether model compounds. Results showed that the tricin moiety significantly affects the chemical shift of the Cß/Hß of 4'⁻Oâ»ß unit, producing peaks at around δC/δH 82.5⁻83.5/4.15⁻4.45, that differ from the Cß/Hß correlations from normal 4⁻Oâ»ß units formed solely by monolignols, and that have to date been unassigned.

Lignin-Derived Thioacidolysis Dimers: Reevaluation, New Products, Authentication, and Quantification.

Lignin structural studies play an essential role both in understanding the development of plant cell walls and for valorizing lignocellulosics as renewable biomaterials. Dimeric products released by selectively cleaving ß-aryl ether linkages between lignin units reflect the distribution of recalcitrant lignin units, but have been neither absolutely defined nor quantitatively determined. Here, 12 guaiacyl-type thioacidolysis dimers were identified and quantified using newly synthesized standards. One product previously attributed to deriving from ß-1-coupled units was established as resulting from ß-5 units, correcting an analytical quandary. Another longstanding dilemma, that no ß-ß dimers were recognized in thioacidolysis products from gymnosperms, was resolved with the discovery of two such authenticated compounds. Individual GC response factors for each standard compound allowed rigorous quantification of dimeric products released from softwood lignins, affording insight into the various interunit-linkage distributions in lignins and thereby guiding the valorization of lignocellulosics.

A thioacidolysis method tailored for higher-throughput quantitative analysis of lignin monomers.

Thioacidolysis is a method used to measure the relative content of lignin monomers bound by ß-O-4 linkages. Current thioacidolysis methods are low-throughput as they require tedious steps for reaction product concentration prior to analysis using standard GC methods. A quantitative thioacidolysis method that is accessible with general laboratory equipment and uses a non-chlorinated organic solvent and is tailored for higher-throughput analysis is reported. The method utilizes lignin arylglycerol monomer standards for calibration, requires 1-2 mg of biomass per assay and has been quantified using fast-GC techniques including a Low Thermal Mass Modular Accelerated Column Heater (LTM MACH). Cumbersome steps, including standard purification, sample concentrating and drying have been eliminated to help aid in consecutive day-to-day analyses needed to sustain a high sample throughput for large screening experiments without the loss of quantitation accuracy. The method reported in this manuscript has been quantitatively validated against a commonly used thioacidolysis method and across two different research sites with three common biomass varieties to represent hardwoods, softwoods, and grasses.