A Universal Self-Propagating Synthesis of Aluminum-Based Oxyhalide Solid-State Electrolytes.

Inorganic solid-state electrolytes (SSEs) play a vital role in high-energy all-solid-state batteries (ASSBs). However, the current method of SSE preparation usually involves high-energy mechanical ball milling and/or a high-temperature annealing process, which is not suitable for practical application. Here, a facile strategy is developed to realize the scalable synthesis of cost-effective aluminum-based oxyhalide SSEs, which involves a self-propagating method by the exothermic reaction of the raw materials. This strategy enables the synthesis of various aluminum-based oxyhalide SSEs with tunable components and high ionic conductivities (over 10-3 S cm-1 at 25 °C) for different cations (Li+, Na+, Ag+). It is elucidated that the amorphous matrix, which mainly consists of various oxidized chloroaluminate species that provide numerous sites for smooth ion migration, is actually the key factor for the achieved high conductivities. Benefit from their easy synthesis, low cost, and low weight, the aluminum-based oxyhalide SSEs synthesized by our approach could further promote practical application of high-energy-density ASSBs.

The Universal Super Cation-Conductivity in Multiple-cation Mixed Chloride Solid-State Electrolytes.

As exciting candidates for next-generation energy storage, all-solid-state lithium batteries (ASSLBs) are highly dependent on advanced solid-state electrolytes (SSEs). Here, using cost-effective LaCl3 and CeCl3 lattice (UCl3 -type structure) as the host and further combined with a multiple-cation mixed strategy, we report a series of UCl3 -type SSEs with high room-temperature ionic conductivities over 10-3  S cm-1 and good compatibility with high-voltage oxide cathodes. The intrinsic large-size hexagonal one-dimensional channels and highly disordered amorphous phase induced by multi-metal cation species are believed to trigger fast multiple ionic conductions of Li+ , Na+ , K+ , Cu+ , and Ag+ . The UCl3 -type SSEs enable a stable prototype ASSLB capable of over 3000 cycles and high reversibility at -30 °C. Further exploration of the brand-new multiple-cation mixed chlorides is likely to lead to the development of advanced halide SSEs suitable for ASSLBs with high energy density.

Comparison of Computer-Assisted Navigation and 3D Printed Patient-Specific Template for the Iliosacral Screw Placement.

BACKGROUND: Iliosacral screw insertion by computer-assisted navigation gradually became the main technique in some hospitals, but the expensive price limited the extensive application. But other techniques such as 3D printed template was used to place iliosacral screw as novel method. This study was to compare the efficiency of percutaneous iliosacral screw placement by using patient-specific template and computer-assisted navigation. METHODS: Total of 58 patients from September 2017 to September 2021 with sacral injury were treated operatively with percutaneous screw technique, which was selected for this retrospective analysis and divided into two groups (template and computer-assisted navigation). There were 31 patients in template group and 27 patients in computer-assisted navigation group. The surgical details (operation time, blood loss, number of screw placements, and number of fluoroscopies), complications, radiographic and clinical results were recorded. The quality of reduction was assessed by the Matta scoring system. T-test and rank-sum test was used in this study. RESULTS: Operation time in template group was less (33.97 ± 16.61 < 60.31 ± 11.46 min, p < 0.01), but the preoperative preparation time was more (6.35 ± 1.60 > 5.41 ± 1.58, p < 0.05). The quality of reduction in both groups was no difference (p = 0.352). A patient was complicated with gluteal vessel injury in operation in navigation group, which was treated with ligation, but the same injury was not observed in template group. The related surgical data of patient with gluteal injury was ignored in statistical analysis. CONCLUSION: Both of the two techniques could improve surgical efficiency, the operation time in template was less than computer-assisted navigation group, but the preoperative preparation time was more.

Magnetic Resonance Imaging Manifestations of Annular Ligament Injuries in Children With Monteggia Fractures.

BACKGROUND: Magnetic resonance imaging (MRI) is commonly performed in children with elbow injuries to visualize soft tissues such as the annular ligament. Herein, we investigated the MRI manifestations of annular ligament injuries in children with Monteggia fractures following attempted closed reduction. METHODS: The clinical and imaging data of 88 children with acute Monteggia fractures treated at our hospital between 2015 and 2019 were analyzed. Clinically and radiographically, 67 patients achieved radiologic reduction of the radial head at the time of MRI, whereas 21 patients had a failed closed reduction. Annular ligament injury and superior radioulnar joint congruency were analyzed qualitatively, and the maximum superior radioulnar joint gap distance was measured. RESULTS: MRI manifestations of annular ligament injury were primarily characterized as varying degrees of annular ligament displacement, as follows: I degree (10 patients), the annular ligament encircled the radial head without displacement; II degree (5 patients), the annular ligament was partially displaced but visibly encircled the radial head at the level of the radial notch; and III degree (73 patients), the annular ligament was completely displaced. In 15 patients with I and II degrees annular ligament injuries, the annular ligament encircled the radial head (maximum superior radioulnar joint gap distance, 1.2±0.3 mm), showing good congruency of the superior radioulnar joint. In 73 patients with III degree annular ligament injury, the annular ligament was displaced and did not encircle the radial head (maximum superior radioulnar joint gap distance, 3.3±2.7 mm; P <0.05), showing good congruency of the superior radioulnar joint in 25 of 73 patients, and significantly poor congruency in 48 of 73 patients ( P <0.05). CONCLUSIONS: Annular ligament injuries in children with Monteggia fractures exhibit different degrees of displacement of the annular ligament. In I and II degree annular ligament injuries, the annular ligament still encircles the radial head. In III degree annular ligament injuries, the annular ligament is displaced away and is no longer around the radial head. Without the annular ligament restraining the radial head, the superior radioulnar joint is more likely to exhibit poor congruency and increased gap distance. LEVEL OF EVIDENCE: Level II.

[Application of annular ligament reposition and repair via Henry's approach for Monteggia fracture in children].

OBJECTIVE: To explore the effectiveness of annular ligament reposition and repair via Henry's approach for Monteggia fracture in children. METHODS: A clinical data of 21 children with Monteggia fractures was retrospectively analysed, who underwent open reduction of the radial head and annular ligament reposition and repair via Henry's approach between May 2015 and July 2019. There were 11 boys and 10 girls with an average age of 8 years and 1 month (range, 4 years and 5 months to 14 years and 4 months). The fracture was caused by falling in 17 cases and by falling from height in 4 cases. There were 16 fresh fractures and 5 old fractures. The Monteggia fractures were rated as Bado typeⅠin 14 cases and Bado type Ⅲ in 7 cases. Preoperative MRI examination and intraoperative observation confirmed that the annular ligament was intact. After operation, the fracture healing, elbow range of motion (ROM), and complications were recorded, and the effectiveness was evaluated according to the Mackay's function scoring system. RESULTS: The incisions healed by first intention after operation, and there was no complication such as radial nerve injury. All children were followed up 12-25 months, with an average of 15 months. No dislocation or subluxation of the radial head occurred after operation. At last follow-up, the ROM of elbow flexion and extension of the children with old fractures increased from (92.6±11.2)° before operation to (123.6±11.6)°, and the ROM of forearm rotation from (96.8±11.8)° to (129.8±5.9)°; the differences between pre- and post-operation were significant ( t=7.672, P=0.002; t=9.487, P=0.001); the ROM of elbow flexion and extension of the children with fresh fractures was 139°-156° (mean, 145°); the ROM of forearm rotation was 158°-168° (mean, 162°). According to Mackay's criteria, 17 cases were excellent and 4 cases were good, with an excellent and good rate of 100%. X-ray film examination showed no nonunion, heterotopic ossification, or loosening of internal fixation after operation. The ulnar fracture and the ulnar osteotomy healed in all cases. CONCLUSION: The annular ligament in Monteggia fractures in children is intact. Compared with the reconstruction of the annular ligament, the reposition and repair of the annular ligament via Henry's approach is closer to the original anatomical state of the annular ligament and has the advantages of less trauma and fewer complications.

Extremely Low Program Current Memory Based on Self-Assembled All-Inorganic Perovskite Single Crystals.

Memory devices based on lead halide perovskite have attracted great interests because of their unique current-voltage hysteresis. However, current memory devices based on polycrystalline perovskites usually suffer from large intrinsic electronic current and parasitic leakage current due to the existence of grain boundaries, which further leads to high power consumption. Here, a low-power resistance switching random-access memory device is demonstrated by assembling single-crystalline CsPbBr3 on Ag electrodes. The assembled structure serves as a bipolar nonvolatile resistance switching memory device with a low program current (∼10 nA), good endurance, long data retention (>103 S), and big on/off ratio of ∼103. The low program current results in a power of ∼3 × 10-8 W, which is much lower than that of polycrystalline perovskite-based devices (10-1-10-6 W). It is found that the formation and annihilation of Ag and bromide vacancy conductive filaments contribute to the significant resistive switching effect. At a low resistive state, the conductive filaments originate from the accumulation of Br- ions at the drain. Furthermore, the conductive filaments are proved to be a cone shape, shrinking from the drain to the source.

Direct Growth of Perovskite Crystals on Metallic Electrodes for High-Performance Electronic and Optoelectronic Devices.

Metal halide perovskite has attracted enhanced interest for its diverse electronic and optoelectronic applications. However, the fabrication of micro- or nanoscale crystalline perovskite functional devices remains a great challenge due to the fragility, solvent, and heat sensitivity of perovskite crystals. Here, a strategy is proposed to fabricate electronic and optoelectronic devices by directly growing perovskite crystals on microscale metallic structures in liquid phase. The well-contacted perovskite/metal interfaces ensure these heterostructures serve as high-performance field effect transistors (FETs) and excellent photodetector devices. When serving as an FET, the on/off ratio is as large as 106 and the mobility reaches up to ≈2.3 cm2 V-1 s-1 . A photodetector is displayed with high photoconductive switching ratio of ≈106 and short response time of ≈4 ms. Furthermore, the photoconductive response is proved to be band-bending-assisted separation of photoexcited carriers at the Schottky barrier of the silver and p-type perovskites.

LAMP3 plays an oncogenic role in osteosarcoma cells partially by inhibiting TP53.

BACKGROUND: Osteosarcoma (OS) is a common malignant tumor that predominantly occurs in adolescents. Its most common metastasis is to the lungs. As shown in our earlier study, lysosome-associated membrane glycoprotein 3 (LAMP3) is highly upregulated in metastatic OS. However, its role in the regulation of OS cell viability and apoptosis remains unknown. METHODS: We knocked down and overexpressed LAMP3 in OS cells and assessed the cell viability and apoptosis. Then, we investigated the expression of apoptosis-associated genes to identify the downstream gene(s) of LAMP3. RESULTS: Knockdown of LAMP3 significantly inhibited OS cell viability and promoted apoptosis. TP53, which is involved in the apoptosis pathway, was found to be highly upregulated after knockdown of LAMP3. Overexpression of LAMP3 significantly increased cell viability and abrogated apoptosis. Importantly, subsequent knockdown of TP53 partially suppressed the increased OS cell apoptosis induced by the inhibition of LAMP3, suggesting that TP53 is a key functional downstream gene of LAMP3. CONCLUSIONS: Our findings suggest that LAMP3 promotes OS cell viability and survival by regulating TP53 expression.

Amplitude response of conical multiwalled carbon nanotube probes for atomic force microscopy.

Carbon nanotubes are considered as great candidates for atomic force microscopy (AFM) probes because of their high aspect ratio and outstanding mechanical properties. In this work, we report that a conical AFM probe can be fabricated with arc discharge prepared multiwalled carbon nanotubes (MWCNTs) with an individual MWCNT at the apex by dielectrophoresis. The amplitude-displacement curve of the conical MWCNT probe demonstrates that this structure can remain stable until the force exerted on it increases to 14.0 ± 1.5 nN (nanonewton). Meanwhile, the conical MWCNT probes are able to resolve complex structure with high aspect ratio compared to commercial AFM probes, suggesting great potential for various AFM applications.