Nanoscale engineering of solid-state materials for boosting hydrogen storage.

The development of novel materials capable of securely storing hydrogen at high volumetric and gravimetric densities is a requirement for the wide-scale usage of hydrogen as an energy carrier. In recent years, great efforts via nanoscale tuning and designing strategies on both physisorbents and chemisorbents have been devoted to improvements in their thermodynamic and kinetic aspects. Increasing the hydrogen storage capacity/density for physisorbents and chemisorbents and improving the dehydrogenation kinetics of hydrides are still considered a challenge. The extensive and fast development of advanced nanotechnologies has fueled a surge in research that presents huge potential in designing solid-state materials to meet the ultimate U.S. Department of Energy capacity targets for onboard light-duty vehicles, material-handling equipments, and portable power applications. Different from the existing literature, in this review, particular attention is paid to the recent advances in nanoscale engineering of solid-state materials for boosting hydrogen storage, especially the nanoscale tuning and designing strategies. We first present a short overview of hydrogen storage mechanisms of nanoscale engineering for boosted hydrogen storage performance on solid-state materials, for example, hydrogen spillover, nanopump effect, nanosize effect, nanocatalysis, and other non-classical hydrogen storage mechanisms. Then, the focus is on recent advancements in nanoscale engineering strategies aimed at enhancing the gravimetric hydrogen storage capacity of porous materials, reducing dehydrogenation temperature and improving reaction kinetics and reversibility of hydrogen desorption/absorption for metal hydrides. Effective nanoscale tuning strategies for enhancing the hydrogen storage performance of porous materials include optimizing surface area and pore volume, fine-tuning nanopore sizes, introducing nanostructure doping, and crafting nanoarchitecture and nanohybrid materials. For metal hydrides, successful strategies involve nanoconfinement, nanosizing, and the incorporation of nanocatalysts. This review further addresses the points to future research directions in the hope of ushering in the practical applications of hydrogen storage materials.

Elucidating the Mechanism of Fe Incorporation in In Situ Synthesized Co-Fe Oxygen-Evolving Nanocatalysts.

Ni- and Co-based catalysts with added Fe demonstrate promising activity in the oxygen evolution reaction (OER) during alkaline water electrolysis, with the presence of Fe in a certain quantity being crucial for their enhanced performance. The mode of incorporation, local placement, and structure of Fe ions in the host catalyst, as well as their direct/indirect contribution to enhancing the OER activity, remain under active investigation. Herein, the mechanism of Fe incorporation into a Co-based host was investigated using an in situ synthesized Co-Fe catalyst in an alkaline electrolyte containing Co2+ and Fe3+. Fe was found to be uniformly incorporated, which occurs solely after the anodic deposition of the Co host structure and results in exceptional OER activity with an overpotential of 319 mV at 10 mA cm-2 and a Tafel slope of 28.3 mV dec-1. Studies on the lattice structure, chemical oxidation states, and mass changes indicated that Fe is incorporated into the Co host structure by replacing the Co3+ sites with Fe3+ from the electrolyte. Operando Raman measurements revealed that the presence of doped Fe in the Co host structure reduces the transition potential of the in situ Co-Fe catalyst to the OER-active phase CoO2. The findings of our facile synthesis of highly active and stable Co-Fe particle catalysts provide a comprehensive understanding of the role of Fe in Co-based electrocatalysts, covering aspects that include the incorporation mode, local structure, placement, and mechanistic role in enhancing the OER activity.

A fluoropolymer bifunctional solid membrane interface for improving the discharge duration in aqueous Al-air batteries.

Herein, a fluoropolymer bifunctional solid membrane interface (SMI) for an aqueous Al-air battery is proposed, which inhibits anodic self-corrosion, while concurrently reducing the accumulation of undesirable by-products. A battery using the SMI exhibits a remarkable anticorrosion efficiency of 81.31% and achieves an astonishing battery lifetime improvement rate of 184.37% under the condition of 5 min intermittent discharge.

The Effect of Y Content on Structural and Sorption Properties of A2B7-Type Phase in the La-Y-Ni-Al-Mn System.

Metal hydrides are an interesting group of chemical compounds, able to store hydrogen in a reversible, compact and safe manner. Among them, A2B7-type intermetallic alloys based on La-Mg-Ni have attracted particular attention due to their high electrochemical hydrogen storage capacity (∼400 mAh/g) and extended cycle life. However, the presence of Mg makes their synthesis via conventional metallurgical routes challenging. Replacing Mg with Y is a viable approach. Herein, we present a systematic study for a series of compounds with a nominal composition of La2-xYxNi6.50Mn0.33Al0.17, x = 0.33, 0.67, 1.00, 1.33, 1.67, focusing on the relationship between the material structural properties and hydrogen sorption performances. The results show that while the hydrogen-induced phase amorphization occurs in the Y-poor samples (x < 1.00) already during the first hydrogen absorption, a higher Y content helps to maintain the material crystallinity during the hydrogenation cycles and increases its H-storage capacity (1.37 wt.% for x = 1.00 vs. 1.60 wt.% for x = 1.67 at 50 °C). Thermal conductivity experiments on the studied compositions indicate the importance of thermal transfer between powder individual particles and/or a measuring instrument.

High-Throughput Sizing, Counting, and Elemental Analysis of Anisotropic Multimetallic Nanoparticles with Single-Particle Inductively Coupled Plasma Mass Spectrometry.

Nanoparticles (NPs) have wide applications in physical and chemical processes, and their individual properties (e.g., shape, size, and composition) and ensemble properties (e.g., distribution and homogeneity) can significantly affect the performance. However, the extrapolation of information from a single particle to the ensemble remains a challenge due to the lack of suitable techniques. Herein, we report a high-throughput single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS)-based protocol to simultaneously determine the size, count, and elemental makeup of several thousands of (an)isotropic NPs independent of composition, size, shape, and dispersing medium with atomistic precision in a matter of minutes. By introducing highly diluted nebulized aqueous dispersions of NPs directly into the plasma torch of an ICP-MS instrument, individual NPs are atomized and ionized, resulting in ion plumes that can be registered by the mass analyzer. Our proposed protocol includes a phase transfer step for NPs synthesized in organic media, which are otherwise incompatible with ICP-MS instruments, and a modeling tool that extends the measurement of particle morphologies beyond spherical to include cubes, truncated octahedra, and tetrahedra, exemplified by anisotropic Cu NPs. Finally, we demonstrate the versatility of our method by studying the doping of bulk-dilute (<1 at. %) CuAg nanosurface alloys as well as the ease with which ensemble composition distributions of multimetallic NPs (i.e., CuPd and CuPdAg) can be obtained providing different insights in the chemistry of nanomaterials. We believe our combined protocol could deepen the understanding of macroscopic phenomena involving nanoscale structures by bringing about a statistics renaissance in research areas including, among others, materials science, materials chemistry, (nano)physics, (nano)photonics, catalysis, and electrochemistry.

Monocarborane cluster as a stable fluorine-free calcium battery electrolyte.

High-energy-density and low-cost calcium (Ca) batteries have been proposed as 'beyond-Li-ion' electrochemical energy storage devices. However, they have seen limited progress due to challenges associated with developing electrolytes showing reductive/oxidative stabilities and high ionic conductivities. This paper describes a calcium monocarborane cluster salt in a mixed solvent as a Ca-battery electrolyte with high anodic stability (up to 4 V vs. Ca2+/Ca), high ionic conductivity (4 mS cm-1), and high Coulombic efficiency for Ca plating/stripping at room temperature. The developed electrolyte is a promising candidate for use in room-temperature rechargeable Ca batteries.

Hydrogen Storage by Reduction of CO2 to Synthetic Hydrocarbons.

The storage of renewable energy is crucial for the substitution of fossil fuels with renewable energy. Hydrogen is the first step in the conversion of electricity from renewable sources to an energy carrier. However, hydrogen is technically and economically challenging to store, but can be converted with CO2 from the atmosphere or oceans to hydrocarbons. The heterogeneously catalyzed gas phase reaction and the electrochemical CO2 reduction are reviewed and the application of a new type of reactor is described. The mechanism of the gas phase CO2 reduction on a heterogeneous catalyst is shown in detail and the function of the supported catalyst is explained. Finally, an economic estimation on the cost of synthetic methane is presented which leads to a cost of 0.3 CHF/kWh in CH4.

Direct CO2 Capture and Reduction to High-End Chemicals with Tetraalkylammonium Borohydrides.

We demonstrate the ability of tetraalkylammonium borohydrides to capture large amounts of CO2 , even at low CO2 concentrations, and reduce it to formate under ambient conditions. These materials show CO2 absorption capacities up to 30 mmol CO 2 g-1 at room temperature and 1 bar CO2 . Every BH4 - anion can react with three CO2 molecules to form triformatoborohydride ([HB(OCHO)3 ]- ). The thermodynamics and kinetics of the reaction were monitored by a magnetic suspension balance (MSB). Direct CO2 capture and reduction from air was achieved with tetraethyl, -propyl, and -butylammonium borohydride. The alkyl chain length played an important role in the kinetics and thermodynamics of the reaction, especially in CO2 diffusivity (crystallinity and free-volume), activation energy (charge-transfer dependent on the alkyl chain), and hydrophobicity. Adding HCl gave formic acid and the corresponding chloride ammonium salt, which can be recycled. In addition, transfer of formate was achieved for the N-formylation of an amine.

Crystal Structural Investigations for Understanding the Hydrogen Storage Properties of YMgNi4-Based Alloys.

The hydrogen storage properties and crystal structures of YMgNi4-based alloys, which were synthesized from (2 - x)YNi2 and xMgNi2 (0.6 ≤ x ≤ 1.2), were investigated by pressure-composition-temperature measurements and powder neutron diffraction at a deuterium gas pressure to understand the hydrogen absorption and desorption reactions viewed from atomic arrangements around H atoms. Reducing the amounts of MgNi2, which was utilized as a Mg source in YMgNi4-based alloys, has been observed to lower the hydrogen absorption and desorption pressures and increase the hydrogen storage capacities. However, the reversible hydrogen capacity attained a maximum value of 1.2 mass % at x = 0.8 because of the formation of a thermodynamically stable hydride in which hydrogen was not released at x = 0.6. In the case of x = 0.6, the presence of excessive Y atoms around the H atoms in the hydrogen-absorbed phase would lead to the formation of a hydride with stronger interaction between Y and H because of the affinity between them. Moreover, the presence of small amounts of D atoms with short interatomic D-D distances (1.6 and 1.9 Å) in the deuterium-absorbed phase (Y0.81Mg1.19Ni4.00D3.35 and Y1.06Mg0.94Ni4.00D3.86) at <5 MPa and 323 K was proposed by the crystal structural investigations. The D atoms with short D-D interatomic distances were located in the same local atomic arrangements of D atoms in a deuterium-absorbed phase, which were formed at a higher-pressure range, and had higher hydrogen storage capacities than the deuterium-absorbed phases in this study.

A combined diffuse reflectance infrared Fourier transform spectroscopy-mass spectroscopy-gas chromatography for the operando study of the heterogeneously catalyzed CO2 hydrogenation over transition metal-based catalysts.

We built an inline diffuse reflectance infrared Fourier transform spectroscopy-mass spectroscopy-gas chromatography (DRIFTS-MS-GC) apparatus aiming at an operando mechanistic study of the heterogeneously catalyzed CO2 hydrogenation reaction. The multifunctional and accurate system enabled the simultaneous utilization of IR, MS, GC, and nuclear magnetic resonance techniques in one single device to analyze the surface, gas, and liquid products formed during the reaction process. To assess the potential of the system, we compared the activity of pristine metal (Fe, Co, Ni, and Cu), metal alloy (LaNi4Cu), and metal-metal oxide (Co-CoO) catalysts with respect to the interactions between gaseous CO2 and the catalyst surfaces. For the quantitative comparison, the rate constants and activation energies of CO2 hydrogenation were determined. The results showed a composition dependent reactivity of the metals. The metal oxide mixed with the metal is essentially important for the formation of observable of the surface species deriving from CO2 adsorption and for the enhancement of the CO2 conversion to CH4.

CO2 Hydrogenation over Unsupported Fe-Co Nanoalloy Catalysts.

The thermo-catalytic synthesis of hydrocarbons from CO2 and H2 is of great interest for the conversion of CO2 into valuable chemicals and fuels. In this work, we aim to contribute to the fundamental understanding of the effect of alloying on the reaction yield and selectivity to a specific product. For this purpose, Fe-Co alloy nanoparticles (nanoalloys) with 30, 50 and 76 wt% Co content are synthesized via the Inert Gas Condensation method. The nanoalloys show a uniform composition and a size distribution between 10 and 25 nm, determined by means of X-ray diffraction and electron microscopy. The catalytic activity for CO2 hydrogenation is investigated in a plug flow reactor coupled with a mass spectrometer, carrying out the reaction as a function of temperature (393-823 K) at ambient pressure. The Fe-Co nanoalloys prove to be more active and more selective to CO than elemental Fe and Co nanoparticles prepared by the same method. Furthermore, the Fe-Co nanoalloys catalyze the formation of C2-C5 hydrocarbon products, while Co and Fe nanoparticles yield only CH4 and CO, respectively. We explain this synergistic effect by the simultaneous variation in CO2 binding energy and decomposition barrier as the Fe/Co ratio in the nanoalloy changes. With increasing Fe content, increased activation temperatures for the formation of CH4 (from 440 K to 560 K) and C2-C5 hydrocarbons (from 460 K to 560 K) are observed.

Stable and High-Efficiency Methylammonium-Free Perovskite Solar Cells.

Organic-inorganic metal halide perovskite solar cells (PSCs) have achieved certified power conversion efficiency (PCE) of 25.2% with complex compositional and bandgap engineering. However, the thermal instability of methylammonium (MA) cation can cause the degradation of the perovskite film, remaining a risk for the long-term stability of the devices. Herein, a unique method is demonstrated to fabricate highly phase-stable perovskite film without MA by introducing cesium chloride (CsCl) in the double cation (Cs, formamidinium) perovskite precursor. Moreover, due to the suboptimal bandgap of bromide (Br- ), the amount of Br- is regulated, leading to high power conversion efficiency. As a result, MA-free perovskite solar cells achieve remarkable long-term stability and a PCE of 20.50%, which is one of the best results for MA-free PSCs. Moreover, the unencapsulated device retains about 80% of the original efficiencies after a 1000 h aging study. These results provide a feasible approach to enhance solar cell stability and performance simultaneously, paving the way for commercializing PSCs.

Solvent- and Catalyst-Free Carbon Dioxide Capture and Reduction to Formate with Borohydride Ionic Liquid.

The metal- and solvent-free capture and reduction of large amounts of CO2 to formate under ambient conditions is achieved by combining a pyrrolidinium-based ionic liquid with a borohydride anion. This material demonstrates one of the highest CO2 capacities at room temperature and 1 bar with up to 1 g CO 2 g-1 IL . CO2 gas reacts with the BH4 - anion to give triformatoborohydride, [HB(OCHO)3 ]- . The reaction occurs without loss in capacity at low CO2 concentration (6 vol % diluted with N2 ). The thermodynamics and kinetics of the reaction were monitored by using a magnetic suspended balance. In addition, more than 1 mol CO 2 mol-1 [ EMPY ] [ BH 4 ] is captured and reduced if air is used as a CO2 source. The product can be then treated with HCl to give formic acid and the corresponding ionic liquid chloride, which can be recycled. This ionic liquid borohydride demonstrates great potential as a CO2 absorber and reducer to produce alternative fuels.

New Ni0.5 Ti2 (PO4 )3 @C NASICON-type Electrode Material with High Rate Capability Performance for Lithium-Ion Batteries: Synthesis and Electrochemical Properties.

Ni0.5 Ti2 (PO4 )3 /C NASICON-type phosphate is introduced as a new anode material for lithium-ion batteries (LIBs). Ni0.5 Ti2 (PO4 )3 /C was synthesized through the sol-gel route and delivered some remarkable electrochemical performances. Specifically, the Ni0.5 Ti2 (PO4 )3 /C electrode demonstrates a high rate capability performance and delivers high reversible capacities ranging from 130 mAh g-1 to about 111 mAh g-1 at current rates ranging from 0.1 C to 5 C in the voltage window of 1.85-3 V (vs. Li+ /Li). In the same voltage range, the material reaches an initial capacity of 105 mAh g-1 with a capacity retention of about 82 % after 1000 cycles at the high current rate of 10 C. The electrodes are also tested in the wider voltage range of 0.5-3 V (vs. Li+ /Li) and show good reversibility and rate capability performance. Moreover, the Ni0.5 Ti2 (PO4 )3 /C electrodes enable fast Li+ diffusion (in the order of 10-13  cm2 s-1 ) compared with other NASICON-type materials. As a result, a first discharge capacity of 480 mAh g-1 is reached.

Ultrathin Carbon Molecular Sieve Films and Room-Temperature Oxygen Functionalization for Gas-Sieving.

Inorganic membranes based on carbon molecular sieve (CMS) films hosting slit-like pores can yield high molecular selectivity with a sub-angstrom resolution in molecular differentiation and therefore are highly attractive for energy-efficient separations. However, the selective layer thickness of the state-of-the-art CMS membranes for gas separation is more than 1 µm, yielding low gas permeance. Also, there is no room-temperature functionalization route for the modification of the pore-size-distribution of CMS to increase the molecular selectivity. In this context, we report two novel fabrication routes, namely, transfer and masking techniques, leading to CMS films with thicknesses as small as 100 nm, yielding attractive gas-sieving performances with H2 permeance reaching up to 3060 gas permeation unit (GPU). Further, a rapid and highly tunable room-temperature ozone treatment-based postsynthetic modification is reported, shrinking the electron density gap in the nanopores by a fraction of an angstrom and improving gas selectivities by several folds. The optimized membranes yielded H2 permeance of 507 GPU and H2/CH4 selectivity of 50.7.

Incarceration of Iodine in a Pyrene-Based Metal-Organic Framework.

A pyrene-based metal-organic framework (MOF) SION-8 captured iodine (I2 ) vapor with a capacity of 460 and 250 mg g-1 MOF at room temperature and 75 °C, respectively. Single-crystal X-ray diffraction analysis and van-der-Waals-corrected density functional theory calculations confirmed the presence of I2 molecules within the pores of SION-8 and their interaction with the pyrene-based ligands. The I2 -pyrene interactions in the I2 -loaded SION-8 led to a 104 -fold increase of its electrical conductivity compared to the bare SION-8. Upon adsorption, ≥95 % of I2 molecules were incarcerated and could not be washed out, signifying the potential of SION-8 towards the permanent capture of radioactive I2 at room temperature.

Fast real time and quantitative gas analysis method for the investigation of the CO2 reduction reaction mechanism.

We present a new fast real time and quantitative gas analysis method by means of mass spectrometry (MS), which has approximately an order of magnitude faster sampling rate in comparison with a traditional gas chromatography. The method is presented and discussed on the example of the CO2 reduction reaction. The advantages of the method are the possibility to analyze the reaction kinetics, where the kinetically determined reaction range is often only tens of degrees wide. Furthermore, due to the fast sampling rate, the experiments are much shorter and effects due to possible aging of the catalyst are significantly reduced. The quantification of the gas partial pressures is achieved by calibrating the Faraday detector in the quadrupole MS for the expected reactants and products. One major challenge to achieve a quantitative measurement with the MS is to correct for the pressure fluctuations over the probing capillary over the course of the experiment. This fluctuation is compensated in the analysis by normalizing the sum of all calculated partial pressures to the measured reaction pressure for every measured spectrum. With that, a precise, fast, and quantitative gas analysis is achieved. This is the fundament for, e.g., the kinetic reaction analysis where a high data point density is required. The method is discussed on the example of the CO2 hydrogenation reaction to CH4 on a commercial Ru/Al2O3 catalyst. Additionally, the key features of the gas controlling and analysis setup built for the CO2 hydrogenation reaction are described.

Photocatalytic Hydrogen Generation from a Visible-Light-Responsive Metal-Organic Framework System: Stability versus Activity of Molybdenum Sulfide Cocatalysts.

We report the use of two earth abundant molybdenum sulfide-based cocatalysts, Mo3S132- clusters and 1T-MoS2 nanoparticles (NPs), in combination with the visible-light active metal-organic framework (MOF) MIL-125-NH2 for the photocatalytic generation of hydrogen (H2) from water splitting. Upon irradiation (λ ≥ 420 nm), the best-performing mixtures of Mo3S132-/MIL-125-NH2 and 1T-MoS2/MIL-125-NH2 exhibit high catalytic activity, producing H2 with evolution rates of 2094 and 1454 µmol h-1 gMOF-1 and apparent quantum yields of 11.0 and 5.8% at 450 nm, respectively, which are among the highest values reported to date for visible-light-driven photocatalysis with MOFs. The high performance of Mo3S132- can be attributed to the good contact between these clusters and the MOF and the large number of catalytically active sites, while the high activity of 1T-MoS2 NPs is due to their high electrical conductivity leading to fast electron transfer processes. Recycling experiments revealed that although the Mo3S132-/MIL-125-NH2 slowly loses its activity, the 1T-MoS2/MIL-125-NH2 retains its activity for at least 72 h. This work indicates that earth-abundant compounds can be stable and highly catalytically active for photocatalytic water splitting, and should be considered as promising cocatalysts with new MOFs besides the traditional noble metal NPs.

Single-layer graphene membranes by crack-free transfer for gas mixture separation.

The single-layer graphene film, when incorporated with molecular-sized pores, is predicted to be the ultimate membrane. However, the major bottlenecks have been the crack-free transfer of large-area graphene on a porous support, and the incorporation of molecular-sized nanopores. Herein, we report a nanoporous-carbon-assisted transfer technique, yielding a relatively large area (1 mm2), crack-free, suspended graphene film. Gas-sieving (H2/CH4 selectivity up to 25) is observed from the intrinsic defects generated during the chemical-vapor deposition of graphene. Despite the ultralow porosity of 0.025%, an attractive H2 permeance (up to 4.1 × 10-7 mol m-2 s-1 Pa-1) is observed. Finally, we report ozone functionalization-based etching and pore-modification chemistry to etch hydrogen-selective pores, and to shrink the pore-size, improving H2 permeance (up to 300%) and H2/CH4 selectivity (up to 150%). Overall, the scalable transfer, etching, and functionalization methods developed herein are expected to bring nanoporous graphene membranes a step closer to reality.

Characteristics and properties of nano-LiCoO2 synthesized by pre-organized single source precursors: Li-ion diffusivity, electrochemistry and biological assessment.

BACKGROUND: LiCoO2 is one of the most used cathode materials in Li-ion batteries. Its conventional synthesis requires high temperature (>800 °C) and long heating time (>24 h) to obtain the micronscale rhombohedral layered high-temperature phase of LiCoO2 (HT-LCO). Nanoscale HT-LCO is of interest to improve the battery performance as the lithium (Li+) ion pathway is expected to be shorter in nanoparticles as compared to micron sized ones. Since batteries typically get recycled, the exposure to nanoparticles during this process needs to be evaluated. RESULTS: Several new single source precursors containing lithium (Li+) and cobalt (Co2+) ions, based on alkoxides and aryloxides have been structurally characterized and were thermally transformed into nanoscale HT-LCO at 450 °C within few hours. The size of the nanoparticles depends on the precursor, determining the electrochemical performance. The Li-ion diffusion coefficients of our LiCoO2 nanoparticles improved at least by a factor of 10 compared to commercial one, while showing good reversibility upon charging and discharging. The hazard of occupational exposure to nanoparticles during battery recycling was investigated with an in vitro multicellular lung model. CONCLUSIONS: Our heterobimetallic single source precursors allow to dramatically reduce the production temperature and time for HT-LCO. The obtained nanoparticles of LiCoO2 have faster kinetics for Li+ insertion/extraction compared to microparticles. Overall, nano-sized LiCoO2 particles indicate a lower cytotoxic and (pro-)inflammogenic potential in vitro compared to their micron-sized counterparts. However, nanoparticles aggregate in air and behave partially like microparticles.