Synthesis and Electron Accepting Properties of Two Di(benz[f]indenone)-Fused Tetraazaanthracene Isomers.

We designed and synthesized a novel di(benz[f]indenone)-fused tetraazaanthracene derivative and isolated its two isomers, 1a and 1s, having anti and syn configurations, respectively. Their structure and that of the condensation reaction intermediates, anti-2a and syn-2s, were fully characterized using one- and two-dimensional nuclear magnetic resonance spectroscopy and single-crystal X-ray diffraction. The optical and electronic properties of 1a and 1s were investigated using ultraviolet-visible absorption and fluorescence spectroscopies, cyclic voltammetry, and time-dependent density functional theory calculations. The presence of the carbonyl and ethynyltris(isopropyl)silane groups endows the di(benzoindenone)-fused azaacene derivatives with a strong electron accepting character. With an electron affinity of approximately -3.7 eV, the two isomers represent attractive electron-deficient molecular systems for the generation of n-channel semiconducting materials. Organic field effect transistors of 1a and 1s showed electron transport, and organic solar cells gave a proof of concept of the potential of the two compounds as electron acceptor materials when they are paired with an electron donor polymer.

Spontaneous exciton dissociation enables spin state interconversion in delayed fluorescence organic semiconductors.

Engineering a low singlet-triplet energy gap (ΔEST) is necessary for efficient reverse intersystem crossing (rISC) in delayed fluorescence (DF) organic semiconductors but results in a small radiative rate that limits performance in LEDs. Here, we study a model DF material, BF2, that exhibits a strong optical absorption (absorption coefficient = 3.8 × 105 cm-1) and a relatively large ΔEST of 0.2 eV. In isolated BF2 molecules, intramolecular rISC is slow (delayed lifetime = 260 µs), but in aggregated films, BF2 generates intermolecular charge transfer (inter-CT) states on picosecond timescales. In contrast to the microsecond intramolecular rISC that is promoted by spin-orbit interactions in most isolated DF molecules, photoluminescence-detected magnetic resonance shows that these inter-CT states undergo rISC mediated by hyperfine interactions on a ~24 ns timescale and have an average electron-hole separation of ≥1.5 nm. Transfer back to the emissive singlet exciton then enables efficient DF and LED operation. Thus, access to these inter-CT states, which is possible even at low BF2 doping concentrations of 4 wt%, resolves the conflicting requirements of fast radiative emission and low ΔEST in organic DF emitters.

Effect of the electron donating group on the excited-state electronic nature and epsilon-near-zero properties of curcuminoid-borondifluoride dyes.

Epsilon-near-zero (ENZ) properties have been reported in organic molecular films. In particular, cyanine and squaraine films have been shown to exhibit ENZ properties in the visible spectral region with a strong 3rd order nonlinear optical response near the ENZ spectral region. Noting both cyanine and squaraine belong to the polymethine family, a series of six curcuminoid borondifluoride (Curc) derivatives were developed to examine whether such a polymethine character is positively correlated with the ENZ property of the organic films. Those Curc derivatives possess a Donor-Acceptor-Donor (D-A-D) architecture with acceptor, AcacBF2, located at the molecular center. The backbone of Curc is designed such that the donor strength can be tuned to transit between charge transfer (CT) and polymethine character. This balance between CT and polymethine character of the Curc series is examined based on the Lippert-Mataga plot. As donor strength in the D-A-D structure increases, CT character is less marked resulting in a more dominant polymethine character. The structural and optical properties of the Curc films with a thickness in the order of 30 nm were examined to correlate the polymethine character with the ENZ response. The results obtained in isotropic Curc thin films demonstrate that an increase of polymethine character associated with a stronger donor strength leads to an appearance/enhancement of the ENZ property in the visible spectrum range from 500 to 670 nm. Overall, this study provides useful guidelines to engineer new organic materials showing ENZ properties in a desired spectral range.

Access to Fluorenones Using Benzocyclopentynone Surrogate as Partner for the [2 + 2 + 2] Cycloaddition Reaction.

A convenient and versatile procedure for the straightforward synthesis of substituted fluorenones as valuable scaffolds is described under rhodium catalysis. The present [2 + 2 + 2] cycloaddition reaction of diynes with 3-acetoxy or-3-alkoxyindenones as surrogates of the highly reactive benzocyclopentynone 2π partner allows the preparation of various fluorenone-type derivatives in good yields and provides an additional and tunable process for the generation of more challenging molecules with application in pharmaceutical, polymer, and material sciences.

Exciton Interactions, Excimer Formation, and [2π+2π] Photodimerization in Nonconjugated Curcuminoid-BF2 Dimers.

We describe the synthesis of a series of covalently linked dimers of quadrupolar curcuminoid-BF2 dyes and the detailed investigation of their solvent-dependent spectroscopic and photophysical properties. In solvents of low polarity, intramolecular folding induces the formation of aggregated chromophores, the UV/Vis absorption spectra of which display the optical signature characteristic of weakly-coupled H-aggregates. The extent of folding and, in turn, of ground-state aggregation is strongly dependent on the nature of the flexible linker. Steady-state and time-resolved fluorescence emission spectroscopies show that the Frenkel exciton relaxes into a fluorescent symmetrical excimer state with a long lifetime. Furthermore, our in-depth studies show that a weakly emitting excimer lies on the pathway toward a photocyclomer. Two-dimensional 1 H NMR spectroscopy and density functional theory (DFT) allowed the structure of the photoproduct to be established. To our knowledge, this represents the first example of a [2π+2π] photodimerization of the curcuminoid chromophore.

Effect of Alkyl Side Chain Length on Doping Kinetics, Thermopower, and Charge Transport Properties in Highly Oriented F4TCNQ-Doped PBTTT Films.

Doping of polymer semiconductors such as poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2- b]thiophene) (PBTTT) with acceptor molecules such as 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) is widely used to tune the charge transport and thermoelectric (TE) properties in thin films. However, the mechanism of dopant insertion in the polymer matrix, insertion kinetics, and the ultimate doping levels reached have been investigated only marginally. This contribution addresses the effect of alkyl side chain length on the doping mechanism of a series of PBTTTs with linear side chains ranging from n-octyl to n-octyldecyl. The study focuses on thin films oriented by high-temperature rubbing and sequentially doped in F4TCNQ solution. Structure-property correlations are established as a function of side chain length by a combination of transmission electron microscopy, polarized UV-vis-NIR spectroscopy, and charge transport/thermopower measurements. Intercalation of F4TCNQ into the layers of side chains results in the expansion of the lattice along the side chains and the contraction along the π-stacking direction for all polymers. The extent of lattice expansion decreases with the increasing side chain length. UV-vis-NIR spectroscopy demonstrates integer charge transfer for all investigated PBTTTs. The doping kinetics and the final doping level depend on both the side chain length and packing. Highly disordered n-octyl and crystalline n-octyldecyl side chain layers tend to hamper dopant diffusion in the side chain layers contrary to n-dodecyl side chains that can host the highest proportion of dopants. Consequently, the best TE properties are observed for C12-PBTTT films. Alignment of the polymers significantly enhances the TE performance by increasing the charge conductivity and the thermopower along the rubbing direction. Aligned films of C12-PBTTT show charge conductivities of 193 S cm-1 along the rubbing direction and power factors of approximately 100 µW m-1 K-2 versus a few µW m-1 K-2 for nonoriented films.

Optical properties of quadrupolar and bi-quadrupolar dyes: intra and inter chromophoric interactions.

In this work we present the synthesis, characterization and theoretical investigation of three boron-difluoride-curcuminoid derivatives and their covalent homodimers chemically linked through a polymethylenic chain. Low-lying electronic excited states and photophysical properties of the monomeric species have been described as the convolution of different donor-acceptor intramolecular excitations. Covalent dimers in solution can present open or folded structural conformations. Analysis of absorption profiles and computational results allow to identify the factors that control the relative stability of the two forms and rationalize its dependence with the solvent polarity. Interestingly, the strong electronic coupling in the folded forms results in low-lying excitations with sizable mixings of intra- and inter-chromophoric contributions, which cannot be described by means of the Kasha model of interacting chromophores. Our study demonstrates how decomposition of the computed excitations in terms of diabatic states can be extremely valuable in order to identify and quantify the nature of electronic transitions in the presence of several electron donor and acceptor fragments.

High-resolution noncontact AFM and Kelvin probe force microscopy investigations of self-assembled photovoltaic donor-acceptor dyads.

Self-assembled donor-acceptor dyads are used as model nanostructured heterojunctions for local investigations by noncontact atomic force microscopy (nc-AFM) and Kelvin probe force microscopy (KPFM). With the aim to probe the photo-induced charge carrier generation, thin films deposited on transparent indium tin oxide substrates are investigated in dark conditions and upon illumination. The topographic and contact potential difference (CPD) images taken under dark conditions are analysed in view of the results of complementary transmission electron microscopy (TEM) experiments. After in situ annealing, it is shown that the dyads with longer donor blocks essentially lead to standing acceptor-donor lamellae, where the acceptor and donor groups are π-stacked in an edge-on configuration. The existence of strong CPD and surface photo-voltage (SPV) contrasts shows that structural variations occur within the bulk of the edge-on stacks. SPV images with a very high lateral resolution are achieved, which allows for the resolution of local photo-charging contrasts at the scale of single edge-on lamella. This work paves the way for local investigations of the optoelectronic properties of donor-acceptor supramolecular architectures down to the elementary building block level.

Controlling charge separation and recombination by chemical design in donor-acceptor dyads.

Conjugated donor-acceptor block co-oligomers that self-organize into D-A mesomorphic arrays have raised increasing interest due to their potential applications in organic solar cells. We report here a combined experimental and computational study of charge transfer (CT) state formation and recombination in isolated donor-spacer-acceptor oligomers based on bisthiophene-fluorene (D) and perylene diimide (A), which have recently shown to self-organize to give a mesomorphic lamellar structure at room temperature. Using femtosecond transient absorption spectroscopy and Time-Dependent Density Functional Theory in combination with the Marcus-Jortner formalism, the observed increase of the CT lifetimes is rationalized in terms of a reduced electronic coupling between D and A brought about by the chemical design of the donor moiety. A marked dependence of the CT lifetime on solvent polarity is observed, underscoring the importance of electrostatic effects and those of the environment at large. The present investigation therefore calls for a more comprehensive design approach including the effects of molecular packing.

Borondifluoride complexes of hemicurcuminoids as bio-inspired push-pull dyes for bioimaging.

Hemicurcuminoids are based on half of the π-conjugated backbone of curcuminoids. The synthesis of a series of such systems and their borondifluoride complexes is described. The electrochemical and photophysical properties of difluorodioxaborine species were investigated as a function of the nature of electron donor and acceptor groups appended at either terminal positions of the molecular backbone. The emissive character of these dipolar dyes was attributed to an intraligand charge transfer process, leading to fluorescence emission that is strongly dependent on solvent polarity. Quasi-quantitative quenching of fluorescence in high polarity solvents was attributed to photoinduced electron transfer. These dyes were shown to behave as versatile fluorophores. Indeed, they display efficient two-photon excited fluorescence emission leading to high two-photon brightness values. Furthermore, they form nanoparticles in water whose fluorescence emission quantum yield is less than that of the dye in solution, owing to aggregation-induced fluorescence quenching. When cos7 living cells were exposed to these weakly-emitting nanoparticles, one- and two-photon excited fluorescence spectra showed a strong emission within the cytoplasm that originated from the individual molecules. Dye uptake thus involved a disaggregation mechanism at the cell membrane which restored fluorescence emission. This off-on fluorescence switching allows a selective optical monitoring of those molecules that do enter the cell, which offers improved sensitivity and selectivity of detection for bioimaging purposes.

Site-selective hexa-hetero-functionalization of α-cyclodextrin an archetypical C6-symmetric concave cycle.

Access to Cn (n>4) symmetric cyclic concave molecules with a different function on each of their n subunits is an unmet challenge. The reason lies in the lack of a post-functionalization method whose site selectivity is sufficiently understood, predictable and modulable to access most functionalization patterns. Here we disclose a new site-directing rule for a debenzylation reaction on cyclodextrins that solves this problem and allows the unprecedented access to penta- and ultimately hexa-differentiations of such C6 concave cycles. This achievement opens the access to objects with very high-density information.

Perylenediimide-based donor-acceptor dyads and triads: impact of molecular architecture on self-assembling properties.

Perylenediimide-based donor-acceptor co-oligomers are particularly attractive in plastic electronics because of their unique electro-active properties that can be tuned by proper chemical engineering. Herein, a new class of co-oligomers has been synthesized with a dyad structure (AD) or a triad structure (DAD and ADA) in order to understand the correlations between the co-oligomer molecular architecture and the structures formed by self-assembly in thin films. The acceptor block A is a perylene tetracarboxyl diimide (PDI), whereas the donor block D is made of a combination of thiophene, fluorene, and 2,1,3-benzothiadiazole derivatives. D and A blocks are linked by a short and flexible ethylene spacer to ease self-assembling in thin films. Structural studies using small and wide X-ray diffraction and transmission electron microscopy demonstrate that AD and ADA lamellae are made of a double layer of co-oligomers with overlapping and strongly π-stacked PDI units because the sectional area of the PDI is about half that of the donor block. These structural models allow rationalizing the absence of organization for the DAD co-oligomer and therefore to draw general rules for the design of PDI-based dyads and triads with proper self-assembling properties of use in organic electronics.

Thiazole as a weak electron-donor unit to lower the frontier orbital energy levels of donor-acceptor alternating conjugated materials.

We demonstrate that the substitution of the thiophene by the thiazole heterocyclic compound as a weak electron-donor unit, in donor-acceptor alternating conjugated materials, allows a simultaneous downshift of both HOMO and LUMO levels while keeping the energy bandgap almost unchanged.

An "against the rules" double bank shot with diisobutylaluminum hydride to allow triple functionalization of α-cyclodextrin.

Frustration leads to overreaction: when diametrically opposed regioselective debenzylation is frustrated, an unexpected double debenzylation reaction affords original tetrafunctionalized cyclodextrins in a controlled and efficient manner. A rationale of the reaction is proposed based on a kinetic study.

Cavitand supported tetraphosphine: cyclodextrin offers a useful platform for Suzuki-Miyaura cross-coupling.

The cyclodextrin-tetraphosphine hybrid coined α-Cytep allows turnover numbers up to 340,000,000,000 and turnover frequencies up to 1,000,000,000 h(-1) to be reached in Suzuki-Miyaura reactions. These exceptional figures are clearly linked to the outstanding longevity of the reactive species induced by the ligand α-Cytep and illustrates the rising potential of cyclodextrins in catalytic applications.