RESUMEN
The current work presents the development of hybrid glass fiber reinforced polyester resin (GFRPs) composite. The composite integrates functionalized carbon nanotubes (f-MWCNTs) with glass fiber (GF) using polyester resin as a media. Hand lay-up method was adopted to prepare GFRPs samples in the form of rectangular sheets. Morphological characteristics of the GFRPs were investigated through scanning electron microscopy (SEM), to analyze the f-MWCNTs distribution and agglomeration of the developed composite's surface due to varying concentrations from 0.0 to 0.5 wt.%. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) were performed to confirm the presence of f-MWCNTs in the developed GFRPs. Sample with 0.4 wt. % f-MWCNTs showed the highest tensile strength and impact energy of 79 MPa, indicating a 31.66% improvement and 1.6 Nm with 77% improvement, respectively as compared to the control sample (0.wt.% f-MWCNT). The same sample also showed the thermal stability till 390 °C as measured through thermogravimetric analysis (TGA). Deposition of extra 10 layers initially increased the composite strength from 40 MPa to 128 MPa, however further increase in layers to 15 resulted decrease in strength to 100 MPa due to the poor interaction between the polyester resin and GF. The addition of f-MWCNTs in the composite effectively strengthens the interfacial bonding, which significantly improved the tensile and impact strength of the composite, making it tougher and thermally stable. However, further increase in the concentration of f-MWCNTs degraded the mechanical properties of developed composite such as compressive strength because of agglomeration of these nanoparticles and void formation in the composite.