Analytical comparison between batch and continuous direct compression processes for pharmaceutical manufacturing using an innovative UV-Vis reflectance method and chemometrics.

Advancements in industrial technologies and the application of quality by design (QbD) guidelines are shifting the attention of manufacturers towards innovative production techniques. In the pharmaceutical field, there is a significant focus on the implementation of continuous processes, in which the production stages are carried out continuously, without the need to interrupt the process and store the production intermediates, as in traditional batch production. Such innovative production techniques also require the development of proper analytical methods able to analyze the products in-line, while still being processed. The present study aims to compare a traditional batch manufacturing process with an alternative continuous one. To this end, a real pharmaceutical formulation was used, substituting the active pharmaceutical ingredient (API) with riboflavin, at the concentration of 2 %w/w. Moreover, a direct and non-destructive analytical method based on UV-Vis reflectance spectroscopy was applied for the quantification of riboflavin in the final tablets, and compared with a traditional absorbance analysis. Good results were obtained in the comparison of both the two manufacturing processes and the two analytical methods, with R2 higher than 0.9 for all the calculated calibration models and predicted riboflavin concentrations that never significantly overcame the 15 % limits recommended by the pharmacopeia. The continuous production method demonstrated to be as reliable as the batch one, allowing to save time and money in the production step. Moreover, UV-Vis reflectance was proved to be an interesting alternative to absorption spectroscopy, which, with the proper technology, could be implemented for in-line process control.

Rapid and green discrimination of bovine milk according to fat content, thermal treatment, brand and manufacturer via colloidal fingerprinting.

Addressing food safety and detecting food fraud while fulfilling greenness requisites for analysis is a challenging but necessary task. The use of sustainable techniques, with limited pretreatment, non-toxic chemicals, high throughput results, is recommended. A combination of Field Flow Fractionation (FFF), working in saline carrier and with minimal preprocessing, and chemometrics was for the first time applied to bovine milk grouping. A set of 47 bovine milk samples was analyzed: a single analysis yielded a characteristic multidimensional colloidal dataset, that once processed with multivariate tools allowed simultaneously for different discriminations: fat content, thermal treatment, brand and manufacturing plant. The analytical methodology is fast, green, simple, and inexpensive and could offer great help in the field of quality control and frauds identification. This work represents also the first attempt to identify milk sub-typologies based on colloidal profiles, and the most complete study concerning multivariate analysis of FFF fingerprint.

Phytochemicals Recovery from Grape Pomace: Extraction Improvement and Chemometric Study.

In the last 20 years, an increased interest has been shown in the application of different types and combinations of enzymes to obtain phenolic extracts from grape pomace in order to maximize its valorization. Within this framework, the present study aims at improving the recovery of phenolic compounds from Merlot and Garganega pomace and at contributing to the scientific background of enzyme-assisted extraction. Five commercial cellulolytic enzymes were tested in different conditions. Phenolic compound extraction yields were analyzed via a Design of Experiments (DoE) methodology and a second extraction step with acetone was sequentially added. According to DoE, 2% w/w enzyme/substrate ratio was more effective than 1%, allowing a higher total phenol recovery, while the effect of incubation time (2 or 4 h) variation was more enzyme-dependent. Extracts were characterized via spectrophotometric and HPLC-DAD analyses. The results proved that enzymatic and acetone Merlot and Garganega pomace extracts were complex mixtures of compounds. The use of different cellulolytic enzymes led to different extract compositions, as demonstrated using PCA models. The enzyme effects were observed both in water enzymatic and in the subsequent acetone extracts, probably due to their specific grape cell wall degradation and leading to the recovery of different molecule arrays.

A Green Analytical Method Combined with Chemometrics for Traceability of Tomato Sauce Based on Colloidal and Volatile Fingerprinting.

Tomato sauce is a world famous food product. Despite standards regulating the production of tomato derivatives, the market suffers frpm fraud such as product adulteration, origin mislabelling and counterfeiting. Methods suitable to discriminate the geographical origin of food samples and identify counterfeits are required. Chemometric approaches offer valuable information: data on tomato sauce is usually obtained through chromatography (HPLC and GC) coupled to mass spectrometry, which requires chemical pretreatment and the use of organic solvents. In this paper, a faster, cheaper, and greener analytical procedure has been developed for the analysis of volatile organic compounds (VOCs) and the colloidal fraction via multivariate statistical analysis. Tomato sauce VOCs were analysed by GC coupled to flame ionisation (GC-FID) and to ion mobility spectrometry (GC-IMS). Instead of using HPLC, the colloidal fraction was analysed by asymmetric flow field-fractionation (AF4), which was applied to this kind of sample for the first time. The GC and AF4 data showed promising perspectives in food-quality control: the AF4 method yielded comparable or better results than GC-IMS and offered complementary information. The ability to work in saline conditions with easy pretreatment and no chemical waste is a significant advantage compared to environmentally heavy techniques. The method presented here should therefore be taken into consideration when designing chemometric approaches which encompass a large number of samples.

Apportioning PM1 in a contrasting receptor site in the Mediterranean region: Aerosol sources with an updated sulfur speciation.

A multi-parametric experimental campaign was performed in Agri Valley (Basilicata, southern Italy) from July 2017 to January 2018. The investigated area, though basically rural and devoted to agricultural activities, hosts a huge on-shore oil reservoir, i.e. Centro Olio Val d'Agri (COVA), bringing substantial environmental modifications and impacts to the district landscape. Daily concentrations of PM1 aerosol samples, Equivalent Black Carbon and number size distributions were evaluated. Chemical aerosol speciation based on elemental and ion analyses were carried out and source apportionment by Positive Matrix Factorization (PMF) was applied to reconstruct PM1 source profile. The most significant emission sources found are torches from the oil treatment facility (37 % w/w), an unresolved factor constituted by soil resuspension, Saharan dust, and biomass burning (24 % w/w), ammonium sulphate (23 % w/w), emissions from the oil desulfurization (Claus process) (13 % w/w), and traffic + road dust (3 % w/w). SEM analysis on PM1 single particles allowed to confirm the finding from PMF including the occurrence of elemental sulfur associated with the Claus process. The novelty of the present study consists in the identification of this latter fingerprint.

Optimization of a Monobromobimane (MBB) Derivatization and RP-HPLC-FLD Detection Method for Sulfur Species Measurement in Human Serum after Sulfur Inhalation Treatment.

(1) Background: Hydrogen sulfide (H2S) is a widely recognized gasotransmitter, with key roles in physiological and pathological processes. The accurate quantification of H2S and reactive sulfur species (RSS) may hold important implications for the diagnosis and prognosis of diseases. However, H2S species quantification in biological matrices is still a challenge. Among the sulfide detection methods, monobromobimane (MBB) derivatization coupled with reversed phase high-performance liquid chromatography (RP-HPLC) is one of the most reported. However, it is characterized by a complex preparation and time-consuming process, which may alter the actual H2S level; moreover, a quantitative validation has still not been described. (2) Methods: We developed and validated an improved analytical protocol for the MBB RP-HPLC method. MBB concentration, temperature and sample handling were optimized, and the calibration method was validated using leave-one-out cross-validation and tested in a clinical setting. (3) Results: The method shows high sensitivity and allows the quantification of H2S species, with a limit of detection of 0.5 µM. Finally, it can be successfully applied in measurements of H2S levels in the serum of patients subjected to inhalation with vapors rich in H2S. (4) Conclusions: These data demonstrate that the proposed method is precise and reliable for measuring H2S species in biological matrices and can be used to provide key insights into the etiopathogenesis of several diseases and sulfur-based treatments.

The Design of Experiment as a Tool to Model Plant Trace-Metal Bioindication Abilities.

Bioindicator plants are species that have the capacity to linearly uptake some elements (metal and metalloids) from the growing substrate, thus reflecting their concentration in the soil. Many factors can influence the uptake of these elements by plants, among which is the simultaneous presence of several metals, a common situation in contaminated or natural soils. A novel approach that can be used to validate the bioindication ability of a species growing on a polymetallic substrate is the design of experiment (DoE) approach. The aim of the present study was to apply the DoE in full factorial mode to model the Cu, Cd, Pb, Zn, and Cr bioindication capacity of Polygonum aviculare, used as the model plant. The results showed that P. aviculare has the ability to bioindicate Cd and Cr with a linear uptake (from 0.35 to 6.66, and 0.1 to 3.4 mg kg-1, respectively) unaffected by the presence of other metals. Conversely, the uptake of Pb, Cu, and Zn is strongly influenced by the presence of all the studied metals, making their concentration in the plant shoot not proportional to that of the soil. In conclusion, these preliminary results confirmed that the DoE can be used to predict the bioindicator abilities of a plant for several elements at the same time and to evaluate the interactions that can be established between variables in the growing medium and in the plant itself. However, more studies including other plant species are needed to confirm the effectiveness of this method.

Inorganic Elements in Mytilus galloprovincialis Shells: Geographic Traceability by Multivariate Analysis of ICP-MS Data.

The international seafood trade is based on food safety, quality, sustainability, and traceability. Mussels are bio-accumulative sessile organisms that need regular control to guarantee their safe consumption. However, no well-established and validated methods exist to trace mussel origin, even if several attempts have been made over the years. Recently, an inorganic multi-elemental fingerprint coupled to multivariate statistics has increasingly been applied in food quality control. The mussel shell can be an excellent reservoir of foreign inorganic chemical species, allowing recording long-term environmental changes. The present work investigates the multi-elemental composition of mussel shells, including Al, Cu, Cr, Zn, Mn, Cd, Co, U, Ba, Ni, Pb, Mg, Sr, and Ca, determined by inductively-coupled plasma mass-spectrometry in Mytilus galloprovincialis collected along the Central Adriatic Coast (Marche Region, Italy) at 25 different sampling sites (18 farms and 7 natural banks) located in seven areas. The experimental data, coupled with chemometric approaches (principal components analysis and linear discriminant analysis), were used to create a statistical model able to discriminate samples as a function of their production site. The LDA model is suitable for achieving a correct assignment of >90% of individuals sampled to their respective harvesting locations and for being applied to counteract fraud.

Production of Antioxidant Molecules in Polygonum aviculare (L.) and Senecio vulgaris (L.) under Metal Stress: A Possible Tool in the Evaluation of Plant Metal Tolerance.

Plants growing on heavy metal (HM)-polluted soils show toxicity symptoms, such as chlorosis and growth reduction, and undergo oxidative stress due to the formation of reactive oxygen species (ROS). Plants overcome oxidative stress by producing a wide range of antioxidant molecules, such as polyphenols and flavonoids. The aim of the present work was to study the accumulation of these molecules in response to increasing concentrations of Cd, Cr, Cu, Ni, Pb and Zn and to assess whether they can be used as a tool in assessing metal-related stress in Polygonum aviculare and Senecio vulgaris. On average, P. aviculare shoots accumulated lower amounts of metals than S. vulgaris shoots. The uptake of all six elements was correlated and proportional to their concentration in the nutrient solution (ρ > 0.9), with the bioaccumulation factor (BAF) being >1 for most of them. The present research demonstrated that 82% of the samples showed a good correlation (|ρ| > 0.5) between the level of polyphenols, flavonoids and antioxidant activity and the metal concentration in plant shoots, confirming that the metal stress level and production of phenolic compounds having antioxidant activity were strictly connected. Nonetheless, the mere quantification of these molecules cannot identify the type of metal that caused the oxidative stress, neither determine the concentration of the stressors. The five tested populations of each species did not show any specific adaptation to the environment of origin.

Organic molecular markers and source contributions in a polluted municipality of north-east Italy: Extended PCA-PMF statistical approach.

Exceeding the maximum levels for environmental pollutants creates public and scientific interest for the environmental and human health impact it may have. In Northern Italy, the Po Valley, and in particular the Veneto region, is still a hotspot for air quality improvement. Several monitoring campaigns were carried out in this area to acquire information about sources of pollutants which are considered critical. For the first time, a deep study of the aerosol organic fraction was performed in the town Sernaglia della Battaglia, nearby Treviso. During three seasons of 2017, PM1 and PM2.5 samples were collected simultaneously. Organic molecular markers have been analyzed by in-situ derivatization thermal desorption gas chromatography time-of-flight mass spectrometry (IDTD-GC-TOFMS). Alkanes, polycyclic aromatic hydrocarbons, oxi-polycyclic aromatic hydrocarbons, anhydrous sugars, resins acids, triterpenoids, and acids were considered. The organic chemical composition has been analyzed based on seasonal variation and source contributions. Principal Component Analysis (PCA) and Positive Matrix Factorization (PMF) have been combined to deeply investigate the main sources of particulate organic matter. On the one hand, PCA evaluates the correlations between the organic markers and their seasonal distribution. On the other hand, the source contributions to aerosol composition are estimated by PMF. Four main emission sources were found by PMF: solid fuel combustion (coal, wood), combustion of petroleum distillates (gas and fuel oil) and exhaust gases of vehicles, industrial combustion processes, home heating, and forest fires are evaluated as the most important sources for the air quality and pollution in this municipality of Northern Italy.

How to Get the Best from Low-Cost Particulate Matter Sensors: Guidelines and Practical Recommendations.

Low-cost sensors based on the optical particle counter (OPC) are increasingly being used to collect particulate matter (PM) data at high space and time resolution. In spite of their huge explorative potential, practical guidelines and recommendations for their use are still limited. In this work, we outline a few best practices for the optimal use of PM low-cost sensors based on the results of an intensive field campaign performed in Bologna (44°30' N, 11°21' E; Italy) under different weather conditions. Briefly, the performances of a series of sensors were evaluated against a calibrated mainstream OPC with a heated inlet, using a robust approach based on a suite of statistical indexes capable of evaluating both correlations and biases in respect to the reference sensor. Our results show that the sensor performance is sensibly affected by both time resolution and weather with biases maximized at high time resolution and high relative humidity. Optimization of PM data obtained is therefore achievable by lowering time resolution and applying suitable correction factors for hygroscopic growth based on the inherent particle size distribution.

ATR-FTIR Spectroscopy, a New Non-Destructive Approach for the Quantitative Determination of Biogenic Silica in Marine Sediments.

Biogenic silica is the major component of the external skeleton of marine micro-organisms, such as diatoms, which, after the organisms death, settle down onto the seabed. These micro-organisms are involved in the CO2 cycle because they remove it from the atmosphere through photosynthesis. The biogenic silica content in marine sediments, therefore, is an indicator of primary productivity in present and past epochs, which is useful to study the CO2 trends. Quantification of biosilica in sediments is traditionally carried out by wet chemistry followed by spectrophotometry, a time-consuming analytical method that, besides being destructive, is affected by a strong risk of analytical biases owing to the dissolution of other silicatic components in the mineral matrix. In the present work, the biosilica content was directly evaluated in sediment samples, without chemically altering them, by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. Quantification was performed by combining the multivariate standard addition method (MSAM) with the net analyte signal (NAS) procedure to solve the strong matrix effect of sediment samples. Twenty-one sediment samples from a sediment core and one reference standard sample were analyzed, and the results (extrapolated concentrations) were found to be comparable to those obtained by the traditional wet method, thus demonstrating the feasibility of the ATR-FTIR-MSAM-NAS approach as an alternative method for the quantification of biosilica. Future developments will cover in depth investigation on biosilica from other biogenic sources, the extension of the method to sediments of other provenance, and the use higher resolution IR spectrometers.

Heavy Metals Bioindication Potential of the Common Weeds Senecio vulgaris L., Polygonum aviculare L. and Poa annua L.

In recent years, heavy metals (HMs) levels in soil and vegetation have increased considerably due to traffic pollution. These pollutants can be taken up from the soil through the root system. The ability of plants to accumulate HMs into their tissues can therefore be used to monitor soil pollution. The aim of this study was to test the ruderal species Senecio vulgaris L., Polygonum aviculare L., and Poa annua L., as possible candidates for biomonitoring Cu, Zn, Cd, Cr, Ni and Pb in multiple environments. The soils analyzed in this work came from three different environments (urban, woodland, and ultramafic), and therefore deeply differed for their metal content, texture, pH, and organic matter (OM) content. All urban soils were characterized by high OM content and presence of anthropogenic metals like Pb, Zn, Cd, and Cu. Woodland soils were sandy and characterized by low metal content and low OM content, and ultramafic soils had high Ni and Cr content. This soil variability affected the bioindication properties of the three studied species, leading to the exclusion of most metals (Zn, Cu, Cr, Cd, and Pb) and one species (P. aviculare) due to the lack of linear relations between metal in soil and metal in plants. Senecio vulgaris and Poa annua, conversely, appeared to be good indicators of Ni in all the soils tested. A high linear correlation between total Ni in soil and Ni concentration in P. annua shoots (R2 = 0.78) was found and similar results were achieved for S. vulgaris (R2 = 0.88).

A Quick and Efficient Non-Targeted Screening Test for Saffron Authentication: Application of Chemometrics to Gas-Chromatographic Data.

Saffron is one of the most adulterated food products all over the world because of its high market prize. Therefore, a non-targeted approach based on the combination of headspace flash gas-chromatography with flame ionization detection (HS-GC-FID) and chemometrics was tested and evaluated to check adulteration of this spice with two of the principal plant-derived adulterants: turmeric (Curcuma longa L.) and marigold (Calendula officinalis L.). Chemometric models were carried out through both linear discriminant analysis (LDA) and partial least squares discriminant analysis (PLS-DA) from the gas-chromatographic data. These models were also validated by cross validation (CV) and external validation, which were performed by testing both models on pure spices and artificial mixtures capable of simulating adulterations of saffron with the two adulterants examined. These models gave back satisfactory results. Indeed, both models showed functional internal and external prediction ability. The achieved results point out that the method based on a combination of chemometrics with gas-chromatography may provide a rapid and low-cost screening method for the authentication of saffron.

Impact of climate change and urban development on the flora of a southern European city: analysis of biodiversity change over a 120-year period.

Ecological studies in cities are not only aimed at investigating floristic diversity, but also represent informative test cases for understanding ecological system dynamics and responses to urban and climate changes since cities represent microcosms of environmental changes happening globally. The city of Bologna was selected as a case study since two specific and complete studies have been carried out in a 120-years timespan, one in 1894 and one in 2018. Since 1894, a large increase occurred in the number of taxa (families from 41 to 101, species from 176 to 477) and alien species (from 22 to 144), with a 65% total species turnover. The comparison of species life forms pointed out a noticeable recent expansion of phanerophytes and geophytes at the expense of therophytes and hemicryptophytes. The correlation between urbanistic features and plant richness indicated that the main factor affecting plant richness is the presence of green spaces (parks, tree lines, flowerbeds, etc.). Analysis of variation in Ellenberg's indicator values over the last 120 years evidenced a shift toward shade-tolerant species, mainly connected to the increased presence of parks and trees within the city. Climate change and the presence of artificially irrigated areas within the city has led to an increase in both hygrophilous and drought-resistant species. In particular, the temperature index showed a significantly higher amount of macrothermal species in accordance with a warmer climate and the urban heat island effect.

Quantifying API polymorphs in formulations using X-ray powder diffraction and multivariate standard addition method combined with net analyte signal analysis.

The direct quantification of Active Pharmaceutical Ingredients in solid formulations is a challenging open issue. A consolidated analytical technique based on X-ray Powder Diffraction is available, being the definitive test for the identification of polymorphs and crystal phases. However, its application for quantitative analysis is hindered by matrix effects: refinement methods (e.g. Rietveld method) require a complete knowledge of samples' composition, while univariate calibration methods require the matrix effect to be studied and severely suffer from the co-presence of crystalline and amorphous phases in the sample. Multivariate analysis is the only way to bypass problems affecting refinements procedures and univariate calibration. In particular, the multivariate standard addition method (SAM) is promising; however, it is straightforward only when the analytical blank (matrix devoid of analyte) is available: in that case SAM is applied by simply extrapolating the SAM model to the matrix experimental signal. In this work, the quantitative analysis of polymorphic forms of Active Pharmaceutical Ingredients based on X-ray Powder Diffraction is performed for the first time by a method based on multivariate standard addition method combined with net analyte signal procedure; it allows for reliable quantification of polymorphs of active principles in solid formulations, which are rapidly analyzed without any sample pre-treatment. Two test cases are presented: quantification of two polymorphs of piracetam in binary mixtures (forms II and III), and quantification of paracetamol (form I) in Tachifludec®.

Seasonal changes in amino acids and phenolic compounds in fruits from hybrid cross populations of American grapes differing in disease resistance.

The production of wine grapes in upstate New York (USA) is limited by diseases that are promoted by the cool and sometimes rainy climate. A breeding program has been introducing disease resistance from related species into the cultivated stock. Previous work has indicated that such resistance may be based on biochemical reactions rather than on a hypersensitive reaction. We therefore undertook metabolic profiling of amino acids and phenolic compounds in berries from collections of susceptible and resistant hybrids over the course of berry development to determine whether any of these compounds could be causal in disease resistance. The most abundant amino acids were GLN, ARG, PRO and THR. The amount of amino acids in ripe berries was from 3 to 4.7-fold higher compared to earlier stages. The concentrations of total phenolics were variable through the season with no consistent trend between susceptible and resistant fruits. Notable changes in phenolic compounds, especially anthocyanins, were recorded, especially during the ripening phase, when phenolics and anthocyanins increased following veraison. The most abundant phenolic compounds were catechin and epi-catechin; the most abundant anthocyanin was delphinidin-3-glucoside, which had a slightly greater concentration in resistant fruit at harvest, followed by malvidin-3-glucoside and petunidin-3-glucoside. The content of both amino acids and phenolic compounds in white-fruited parent cv. Horizon was equal to several-fold lower than the progeny plants, whether susceptible or resistant, depending on the harvest time. While no major differences between susceptible and resistant lines were found, multivariate analyses showed that it is possible to discriminate the susceptibility or resistance of grapes by analyzing their combined concentrations of amino acids, polyphenols and anthocyanins. Therefore, these compounds are influenced by the resistance capacity of grapes and could be used as a chemical fingerprint of this ability. However, it is likely that these are associations with disease resistance rather than their cause as no major consistent differences were noted.

Floristic diversity in different urban ecological niches of a southern European city.

The present paper aimed at studying the vertical and horizontal spatial distribution, species richness and diversity of vascular plants in different urban ecological niches (urban habitats) by means of the case study of Bologna (Italy), a typical densely populated southern European city. A total of 477 species were found in the study area of the historical city centre, 30% of which were alien species. Alien plant species were mainly present among phanerophytes, while native plants were mainly therophytes and hemicryptophytes. The habitats that mostly contributed to the species total richness were semi-natural soils, followed by paved areas, walls, rooftops and manholes. The number of exclusive species decreased according to the selectiveness of the habitat, with manholes and rooftops being the most selective. The presence of hemicryptophytes constant decreased going from 27% of more humid habitats to 5% of more arid habitats, so that they can be considered a water availability biomarker. Urban habitat quality, measured by the number of native species, was directly proportional to the strength of selective factors and inversely proportional to the rate of disturbance, with roofs and semi-natural soils having, respectively, the highest and lowest quality. Finally, a relation between species richness and street characteristics, like width, orientation and type of flooring, was demonstrated.

A Comparative Assessment of Biological Effects and Chemical Profile of Italian Asphodeline lutea Extracts.

The present study aims to highlight the therapeutic potential of Asphodeline lutea (AL), a wild edible plant of the Mediterranean diet. Roots, aerial parts, and flowers of AL at two different phenological stages were collected from three locations in Italy. The inhibitory activities of extracts on strategic enzymes linked to human diseases were assessed. The antioxidant properties were evaluated in vitro, using six standard bioassays. The phenolic and anthraquinone profiles were also established using HPLC-PDA. Zinc, cadmium, lead, and copper contents were also determined. All the samples inhibited acetylcholinesterase (from 1.51 to 2.20 mg GALAEs/g extract), tyrosinase (from 7.50 to 25.3 mg KAEs/g extract), and α-amylase (from 0.37 to 0.51 mmol ACAEs/g extract). Aloe-emodin and physcion were present in all parts, while rhein was not detected. The phenolic profile and the heavy metals composition of specimens gathered from three different regions of Italy were different. It can be argued that samples collected near the street can contain higher concentrations of heavy metals. The experimental data confirm that the A. lutea species could be considered as a potential source of bioactive metabolites, and its consumption could play a positive and safe role in human health maintenance.

Rapid direct analysis to discriminate geographic origin of extra virgin olive oils by flash gas chromatography electronic nose and chemometrics.

At present, the geographical origin of extra virgin olive oils can be ensured by documented traceability, although chemical analysis may add information that is useful for possible confirmation. This preliminary study investigated the effectiveness of flash gas chromatography electronic nose and multivariate data analysis to perform rapid screening of commercial extra virgin olive oils characterized by a different geographical origin declared in the label. A comparison with solid phase micro extraction coupled to gas chromatography mass spectrometry was also performed. The new method is suitable to verify the geographic origin of extra virgin olive oils based on principal components analysis and discriminant analysis applied to the volatile profile of the headspace as a fingerprint. The selected variables were suitable in discriminating between "100% Italian" and "non-100% Italian" oils. Partial least squares discriminant analysis also allowed prediction of the degree of membership of unknown samples to the classes examined.