Influence of Fiber Diameter of Polycaprolactone Nanofibrous Materials on Biofilm Formation and Retention of Bacterial Cells.

To develop microbiologically safe nanofibrous materials, it is crucial to understand their interactions with microbial cells. Current research indicates that the morphology of nanofibers, particularly the diameter of the fibers, may play a significant role in biofilm formation and retention. However, it has not yet been determined how the fiber diameter of poly-ε-caprolactone (PCL), one of the most widely used biopolymers, affects these microbial interactions. In this study, two nanofibrous materials electrospun from PCL (PCL45 and PCL80) with different fiber diameter and characteristic distance δ between fibers were compared in terms of their ability to support or inhibit bacterial biofilm formation and retain bacterial cells. Strains of Escherichia coli (ATCC 25922 and ATCC 8739) and Staphylococcus aureus (ATCC 25923 and ATCC 6538) were used as model bacteria. Biofilm formation rate and retention varied significantly between the E. coli and S. aureus strains (p < 0.05) for the tested nanomaterials. In general, PCL showed a lower tendency to be colonized by the tested bacteria compared to the control material (polystyrene). Fiber diameter did not influence the biofilm formation rate of S. aureus strains and E. coli 25922 (p > 0.05), but it did significantly impact the biofilm formation rate of E. coli 8739 and biofilm morphology formed by all of the tested bacterial strains. In PCL45, thick uniform biofilm layers were formed preferably on the surface, while in PCL80 smaller clusters formed preferably inside the structure. Further, fiber diameter significantly influenced the retention of bacterial cells of all the tested strains (p < 0.001). PCL45, with thin fibers (average fiber diameter of 376 nm), retained up to 7 log (CFU mL-1) of staphylococcal cells (100% retention). The overall results indicate PCL45's potential for further research and highlight the nanofibers' morphology influence on bacterial interactions and differences in bacterial strains' behavior in the presence of nanomaterials.

Parvalbumin Gene: A Valuable Marker for Pike Authentication and Allergen Risk Assessment.

Fish from the pike (Esox) genus are valued in gastronomy for their superior meat quality. However, they can cause allergic reactions in sensitive consumers. This work aimed to fill the gap in the detection of pike allergens using molecular-biological techniques. New, fast, and accurate loop-mediated isothermal amplification (LAMP) and real-time PCR (qPCR) assays were designed to detect pike DNA using the parvalbumin gene as a marker. LAMP was assessed by electrophoresis, SYBR green optical detection, and real-time fluorescence detection. The latter was the most sensitive, detecting as little as 0.78 ng of pike DNA; the qPCR detection limit was 0.1 ng. The LAMP analysis took 20-70 min, which is significantly faster than qPCR. The study provides reliable detection and quantification of the parvalbumin gene in both fresh and processed samples and further highlights the versatility of the use of the parvalbumin gene for the authentication of food products and consumer protection via refined allergen risk assessment that is independent of the type of tissue or food processing method used.

Modeling the growth of Aspergillus brasiliensis affected by a nonthermal plasma.

AIM: The main objective of the study was to develop and validate a model for the growth of Aspergillus brasiliensis on surfaces, specifically on agar culture medium. An additional aim was to determine conditions for complete growth inhibition of this micromycete using two different nonthermal plasma (NTP) sources. METHODS AND RESULTS: The developed model uses two key parameters, namely the growth rate and growth delay, which depend on the cultivation temperature and the amount of inoculum. These parameters well describe the growth of A. brasiliensis and the effect of NTP on it. For complete fungus inactivation, a single 10-minute exposure to a diffuse coplanar surface barrier discharge was sufficient, while a point-to-ring corona discharge required several repeated 10-minute exposures at 24-h intervals. CONCLUSIONS: The article presents a model for simulating the surface growth of A. brasiliensis and evaluates the effectiveness of two NTP sources in deactivating fungi on agar media.

cor1 Gene: A Suitable Marker for Identification of Opium Poppy (Papaver somniferum L.).

This paper discusses the development of rapid, reliable, and accurate polymerase chain reaction (PCR) assays for detecting opium poppy (Papaver somniferum L.) in food. Endpoint, quantitative, and digital PCRs were compared based on the amplification of a newly developed DNA marker targeting the NADPH-dependent codeinone reductase (COR) gene. Designed assays were shown to be highly specific and sensitive in discriminating opium poppy from other plant species, even in heat-treated and food samples. Digital PCR was the most sensitive, with a detection limit of up to 5 copies, i.e., approximately 14 pg of target DNA per reaction. Quantitative and digital PCR further allowed the quantification of opium poppy in up to 1.5 ng and 42 pg (15 copies) of target DNA in a sample, respectively. In addition, two duplex PCRs have been developed for the simultaneous detection of opium poppy DNA and representatives of (i) the Papaveraceae family or (ii) the Plantae kingdom. Finally, all designed assays were successfully applied for analysis of 15 commercial foodstuffs; two were suspected of being adulterated. The study results have an important impact on addressing food fraud and ensuring the safety and authenticity of food products. Beyond food adulteration, the study may also have significant implications for forensics and law enforcement.

Prevalence of SARS-CoV-2 variants in Prague wastewater determined by nanopore-based sequencing.

The early detection of upcoming disease outbreaks is essential to avoid both health and economic damage. The last four years of COVID-19 pandemic have proven wastewater-based epidemiology is a reliable system for monitoring the spread of SARS-CoV-2, a causative agent of COVID-19, in an urban population. As this monitoring enables the identification of the prevalence of spreading variants of SARS-CoV-2, it could provide a critical tool in the fight against this viral disease. In this study, we evaluated the presence of variants and subvariants of SARS-CoV-2 in Prague wastewater using nanopore-based sequencing. During August 2021, the data clearly showed that the number of identified SARS-CoV-2 RNA copies increased in the wastewater earlier than in clinical samples indicating the upcoming wave of the Delta variant. New SARS-CoV-2 variants consistently prevailed in wastewater samples around a month after they already prevailed in clinical samples. We also analyzed wastewater samples from smaller sub-sewersheds of Prague and detected significant differences in SARS-CoV-2 lineage progression dynamics among individual localities studied, e.g., suggesting faster prevalence of new variants among the sites with highest population density and mobility.

Monitoring of monkeypox viral DNA in Prague wastewater.

Monkeypox virus (Mpxv) is a dsDNA virus that has become a global concern for human health in 2022. As both infected people and non-human hosts can shed the virus from their skin, faeces, urine and other body fluids, and the resulting sewage contains viral load representative of the whole population, it is highly promising to detect the spread of monkeypox virus in municipal wastewater. We established a methodology for sewage-based monitoring of Mpxv in Prague and analysed samples (n = 24) already early August-October of 2022 in a municipality with 1.4 million inhabitants that only reported 29 cumulative cases in this period. We isolated Mpxv DNA with the Wizard Enviro Total Nucleic Acid Kit, and thereafter detected Mpxv DNA using the EliGene® Monkeypox RT-PCR Kit. Prague wastewater was positive for Mpxv (in total 9 positive samples in periods with 1-9 new cases per week, coinciding with a weekly incidence of 0.07-0.64 per 100,000 inhabitants. The method for confirmation of wastewater positivity via semi-nested PCR and Sanger sequencing was successfully confirmed on positive controls including Mpxv particles and Mpxv-positive wastewater from the Netherlands. However, for Prague wastewater samples, amplification of Mpxv DNA via semi-semi-nested PCR was unsuccessful. This was probably due to extremely low case count, leading to the amplification of non-target bacterial DNA. Compared to other studies with much higher Mpxv prevalence, we show the outstanding sensitivity of our approach for monitoring the spread of monkeypox using wastewater.

Identification of Fish Species and Targeted Genetic Modifications Based on DNA Analysis: State of the Art.

Food adulteration is one of the most serious problems regarding food safety and quality worldwide. Besides misleading consumers, it poses a considerable health risk associated with the potential non-labeled allergen content. Fish and fish products are one of the most expensive and widely traded commodities, which predisposes them to being adulterated. Among all fraud types, replacing high-quality or rare fish with a less valuable species predominates. Because fish differ in their allergen content, specifically the main one, parvalbumin, their replacement can endanger consumers. This underlines the need for reliable, robust control systems for fish species identification. Various methods may be used for the aforementioned purpose. DNA-based methods are favored due to the characteristics of the target molecule, DNA, which is heat resistant, and the fact that through its sequencing, several other traits, including the recognition of genetic modifications, can be determined. Thus, they are considered to be powerful tools for identifying cases of food fraud. In this review, the major DNA-based methods applicable for fish meat and product authentication and their commercial applications are discussed, the possibilities of detecting genetic modifications in fish are evaluated, and future trends are highlighted, emphasizing the need for comprehensive and regularly updated online database resources.

Parvalbumin: A Major Fish Allergen and a Forensically Relevant Marker.

Parvalbumins (PVALBs) are low molecular weight calcium-binding proteins. In addition to their role in many biological processes, PVALBs play an important role in regulating Ca2+ switching in muscles with fast-twitch fibres in addition to their role in many biological processes. The PVALB gene family is divided into two gene types, alpha (α) and beta (ß), with the ß gene further divided into two gene types, beta1 (ß1) and beta2 (ß2), carrying traces of whole genome duplication. A large variety of commonly consumed fish species contain PVALB proteins which are known to cause fish allergies. More than 95% of all fish-induced food allergies are caused by PVALB proteins. The authentication of fish species has become increasingly important as the seafood industry continues to grow and the growth brings with it many cases of food fraud. Since the PVALB gene plays an important role in the initiation of allergic reactions, it has been used for decades to develop alternate assays for fish identification. A brief review of the significance of the fish PVALB genes is presented in this article, which covers evolutionary diversity, allergic properties, and potential use as a forensic marker.

Potential of Polyamide Nanofibers With Natamycin, Rosemary Extract, and Green Tea Extract in Active Food Packaging Development: Interactions With Food Pathogens and Assessment of Microbial Risks Elimination.

Increasing microbial safety and prolonging the shelf life of products is one of the major challenges in the food industry. Active food packaging made from nanofibrous materials enhanced with antimicrobial substances is considered a promising way. In this study, electrospun polyamide (PA) nanofibrous materials functionalized with 2.0 wt% natamycin (NAT), rosemary extract (RE), and green tea extract (GTE), respectively, were prepared as active packaging and tested for the food pathogens Escherichia coli, Listeria monocytogenes, Salmonella enterica, and Staphylococcus aureus. The PAs exhibited: (i) complete retention of bacterial cells reaching 6.0-6.4 log10removal, (ii) antimicrobial activity with 1.6-3.0 log10suppression, and (iii) antibiofilm activity with 1.7-3.0 log10suppression. The PAs prolonged the shelf life of chicken breast; up to 1.9 log10(CFU/g) suppression of total viable colonies and 2.1 log10(CFU/g) suppression of L. monocytogenes were observed after 7 days of storage at 7°C. A beneficial effect on pH and sensory quality was verified. The results confirm microbiological safety and benefits of PA/NAT, PA/RE, and PA/GTE and their potential in developing functional and ecological packaging.

Monitoring COVID-19 spread in Prague local neighborhoods based on the presence of SARS-CoV-2 RNA in wastewater collected throughout the sewer network.

Many reports have documented that the presence of SARS-CoV-2 RNA in the influents of municipal wastewater treatment plants (WWTP) correlates with the actual epidemic situation in a given city. However, few data have been reported thus far on measurements upstream of WWTPs, i.e. throughout the sewer network. In this study, the monitoring of the presence of SARS-CoV-2 RNA in Prague wastewater was carried out at selected locations of the Prague sewer network from August 2020 through May 2021. Various locations such as residential areas of various sizes, hospitals, city center areas, student dormitories, transportation hubs (airport, bus terminal), and commercial areas were monitored together with four of the main Prague sewers. The presence of SARS-CoV-2 RNA was determined by reverse transcription - multiplex quantitative polymerase chain reaction (RT-mqPCR) after the precipitation of nucleic acids with PEG 8,000 and RNA isolation with TRIzol™ Reagent. The number of copies of the gene encoding SARS-CoV-2 nucleocapsid (N1) per liter of wastewater was compared with the number of officially registered COVID-19 cases in Prague. Although the data obtained by sampling wastewater from the major Prague sewers were more consistent than those obtained from the small sewers, the correlation between wastewater-based and clinical-testing data was also good for the residential areas with more than 7,000 registered inhabitants. It was shown that monitoring SARS-CoV-2 RNA in wastewater sampled from small sewers could identify isolated occurrences of COVID-19-positive cases in local neighborhoods. This can be very valuable while tracking COVID-19 hotspots within large cities.

OpiumPlex is a novel microsatellite system for profiling opium poppy (Papaver somniferum L.).

Opium poppy (Papaver somniferum L.) is a versatile plant exploited by the pharmaceutical and food industries. Unfortunately, it is also infamously known as a source of highly addictive narcotics, primarily heroin. Drug abuse has devastating consequences for users and also has many direct or indirect negative impacts on human society as a whole. Therefore, developing a molecular genetic tool for the individualization of opium poppy, raw opium or heroin samples could help in the fight against the drug trade by retrieving more information about the source of narcotics and linking isolated criminal cases. Bioinformatic analysis provided insight into the distribution, density and other characteristics of roughly 150 thousand microsatellite loci within the poppy genome and indicated underrepresentation of microsatellites with the desired attributes. Despite this fact, 27 polymorphic STR markers, divided into three multiplexed assays, were developed in this work. Internal validation confirmed species-specific amplification, showed that the optimal amount of DNA is within the range of 0.625-1.25 ng per reaction, and indicate relatively well balanced assays according to the metrics used. Moreover, the stutter ratio (mean + 3 SD 2.28-15.59%) and allele-specific stutters were described. The analysis of 187 individual samples led to the identification of 158 alleles in total, with a mean of 5.85 alleles and a range of 3-14 alleles per locus. Most of the alleles (151) were sequenced by the Sanger method, which enabled us to propose standardized nomenclature and create three allelic ladders. The OpiumPlex system discriminates most of the varieties from each other and pharmaceutical varieties from the others (culinary, dual and ornamental).

Contribution to determination of extracellular DNA origin in the biofilm matrix.

This study is focused on the analysis of extracellular DNA (eDNA) from a biofilm matrix formed by Staphylococcus aureus, Listeria monocytogenes, and Salmonella enterica. The presence of eDNA in the biofilm of all the studied strains was confirmed by confocal laser scanning microscopy using fluorescent dyes with high affinity to nucleic acid. The protocol for eDNA isolation from the biofilm matrix was established, and subsequent characterization of the eDNA was performed. The purified eDNA obtained from the biofilm matrix of all three microorganisms was compared to the genomic DNA (gDNA) isolated from relevant planktonic grown cells. The process of eDNA isolation consisted of biofilm cultivation, its collection, sonication, membrane filtration, dialysis, lyophilisation, and extraction of DNA separated from the biofilm matrix with cetyltrimethylammonium bromide. An amplified fragment length polymorphism (AFLP) was used for comparing eDNA and gDNA. AFLP profiles showed a significant similarity between eDNA and gDNA at the strain level. The highest similarity, with a profile concordance rate of 94.7% per strain, was observed for S. aureus, L. monocytogenes, and S. enterica exhibited lower profiles similarity (78% and 60%, respectively). The obtained results support the hypothesis that the eDNA of studied bacterial species has its origin in the gDNA.

Benefits of Polyamide Nanofibrous Materials: Antibacterial Activity and Retention Ability for Staphylococcus Aureus.

Although nanomaterials are used in many fields, little is known about the fundamental interactions between nanomaterials and microorganisms. To test antimicrobial properties and retention ability, 13 electrospun polyamide (PA) nanomaterials with different morphology and functionalization with various concentrations of AgNO3 and chlorhexidine (CHX) were analyzed. Staphylococcus aureus CCM 4516 was used to verify the designed nanomaterials' inhibition and permeability assays. All functionalized PAs suppressed bacterial growth, and the most effective antimicrobial nanomaterial was evaluated to be PA 12% with 4.0 wt% CHX (inhibition zones: 2.9 ± 0.2 mm; log10 suppression: 8.9 ± 0.0; inhibitory rate: 100.0%). Furthermore, the long-term stability of all functionalized PAs was tested. These nanomaterials can be stored at least nine months after their preparation without losing their antibacterial effect. A filtration apparatus was constructed for testing the retention of PAs. All of the PAs effectively retained the filtered bacteria with log10 removal of 3.3-6.8 and a retention rate of 96.7-100.0%. Surface density significantly influenced the retention efficiency of PAs (p ≤ 0.01), while the effect of fiber diameter was not confirmed (p ≥ 0.05). Due to their stability, retention, and antimicrobial properties, they can serve as a model for medical or filtration applications.

Bacterial Biofilms on Polyamide Nanofibers: Factors Influencing Biofilm Formation and Evaluation.

Electrospun polyamide (PA) nanofibers have great potential for medical applications (in dermatology as antimicrobial compound carriers or surgical sutures). However, little is known about microbial colonization on these materials. Suitable methods need to be chosen and optimized for the analysis of biofilms formed on nanofibers and the influence of their morphology on biofilm formation. We analyzed 11 PA nanomaterials, both nonfunctionalized and functionalized with AgNO3, and tested the formation of a biofilm by clinically relevant bacteria (Escherichia coli CCM 4517, Staphylococcus aureus CCM 3953, and Staphylococcus epidermidis CCM 4418). By four different methods, it was confirmed that all of these bacteria attached to the PAs and formed biofilms; however, it was found that the selected method can influence the outcomes. For studying biofilms formed by the selected bacteria, scanning electron microscopy, resazurin staining, and colony-forming unit enumeration provided appropriate and comparable results. The values obtained by crystal violet (CV) staining were misleading due to the binding of the CV dye to the PA structure. In addition, the effect of nanofiber morphology parameters (fiber diameter and air permeability) and AgNO3 functionalization significantly influenced biofilm maturation. Furthermore, the correlations between air permeability and surface density and fiber diameter were revealed. Based on the statistical analysis, fiber diameter was confirmed as a crucial factor influencing biofilm formation (p ≤ 0.01). The functionalization of PAs with AgNO3 (from 0.1 wt %) effectively suppressed biofilm formation. The PA functionalized with a concentration of 0.1 wt % AgNO3 influenced the biofilm equally as nonfunctionalized PA 8% 2 g/m2. Therefore, biofilm formation could be affected by the above-mentioned morphology parameters, and ultimately, the risk of infections from contaminated medical devices could be reduced.

Authentication of Meat and Meat Products Using Triacylglycerols Profiling and by DNA Analysis.

Two alternative, complementary analytical strategies were successfully used to identify the most common meat species-beef, pork and chicken-in meat products. The first innovative high-throughput approach was based on triacylglycerols fingerprinting by direct analysis in real time coupled with high-resolution mass spectrometry (DART-HRMS). The second was the classic commonly used DNA analysis based on the use of nuclear or mitochondrial DNA in multiplex polymerase chain reaction (mPCR). The DART-HRMS method represents a rapid, high throughput screening method and was shown to have a good potential for the authentication of meat products. Nevertheless, it should be noted that due to a limited number of samples in this pilot study, we present here a proof of concept. More samples must be analyzed by DART-HRMS to build a robust classification model applicable for reliable authentication. To verify the DART-HRMS results, all samples were analyzed by PCRs. Good compliance in samples classification was documented. In routine practice under these conditions, screening based on DART-HRMS could be used for identification of suspect samples, which could be then examined and validated by accurate PCRs. In this way, saving of both labor and cost could be achieved. In the final phase, commercially available meat products from the Czech market were tested using this new strategy. Canned meats-typical Czech sausages and luncheon meats, all with declared content of beef, pork and chicken meat-were used. Compliance with the label declaration was confirmed and no adulteration was found.

Monitoring of resistance genes in Listeria monocytogenes isolates and their presence in the extracellular DNA of biofilms: a case study from the Czech Republic.

The alarming occurrence of antibiotic resistance genes in food production demands continuous monitoring worldwide. One reservoir of resistance genes is thought to be eDNA. There is currently little available information in Europe about either the extracellular DNA distribution of the bacterium or the spread of resistance genes in L. monocytogenes. Therefore, our aims were to give insight into the Listeria monocytogenes resistance situation in the Czech Republic and assess the presence of resistance genes in their extracellular DNA (eDNA). First, susceptibility tests were performed on 49 isolates of L. monocytogenes with selected antibiotics. Next, we tested DNA of suspected isolates for the presence of resistance genes in both planktonic cells and the eDNA of biofilms. Finally, fluorescent confocal microscopy was used to observe the eDNA pattern of selected isolates under conditions that mimicked the food processing environment and the human body. Susceptibility tests found isolates intermediate resistant to chloramphenicol, tetracycline, and ciprofloxacin as well as isolates resistant to ciprofloxacin. For all suspected isolates, PCR confirmed the presence of the gene lde encoding efflux pump in both types of DNA. When the biofilm was observed using confocal laser scanning microscope, the eDNA distribution patterns varied considerably according to the culture conditions. Furthermore, the food and clinical isolates varied in terms of the amount of eDNA detected. The presence of an efflux pump in both types of DNA suggests that the eDNA might serve as a reservoir of resistance genes. Surprising differences were observed in the eDNA pattern. Our results suggest that the current risk of the spread of L. monocytogenes resistance genes is low in the Czech Republic, but they also indicate the need for continuous long-term monitoring of the situation.

Transcriptomic and metabolic responses of Staphylococcus aureus in mixed culture with Lactobacillus plantarum, Streptococcus thermophilus and Enterococcus durans in milk.

Staphylococcus aureus is a major food-borne pathogen due to the production of enterotoxin and is particularly prevalent in contaminated milk and dairy products. The lactic acid bacteria (LAB) are widely used as biocontrol agents in fermented foods which can inhibit pathogenic flora. In our work, we investigated the influence of three strains of LAB (Lactobacillus plantarum, Streptococcus thermophilus and Enterococcus durans) on the relative expression of three enterotoxin genes (sea, sec, sell) and eight virulence and/or regulatory genes (sarA, saeS, codY, srrA, rot, hld/RNAIII, agrA/RNAII, sigB) in two S. aureus strains (MW2 and Sa1612) in TSB and reduced-fat milk (1.5 %) at 30 °C over a 24-h period. The tested LAB and S. aureus strains proved to be mutually non-competitive or only slightly competitive during co-cultivation. In addition, under the above-mentioned conditions, differential gene expression between the S. aureus MW2 and Sa1612 strains was well documented. S. aureus growth was changed in mixed culture with LAB; however, its effect on the repression of sea and sec expression correlated with production of these virulence factors. In comparison, the presence of LAB strains generally inhibited the expression of sec, sell, sarA, seaS, agrA/RNAII and hld/RNAIII genes. The effect of LAB strains presence on the expression of sea, codY, srrA, rot and sigB genes was medium, time, LAB and S. aureus strain specific. SEA and SEC production was significantly reduced in milk compared to TSB in pure culture. After the 24-h cultivation, S. aureus MW2 and Sa1612 SEC production was 187 and 331 times lower in milk compared to TSB, respectively (0.07 and 0.39 ng/mL in milk, versus 13.1 and 129.2 ng/mL in TSB, respectively). At the same time S. aureus MW2 and Sa1612 SEA production was 77 and 68 times lower in milk compared to TSB, respectively (0.99 and 0.17 ng/mL in milk, versus 76.4 and 11.5 ng/mL in TSB, respectively). This study has revealed new insights into the interaction between S. aureus and LAB (L. plantarum, S. thermophilus, E. durans) on the level of the expression and/or production of S. aureus enterotoxins, regulatory and virulence genes in different media, including milk. This study provides data which may improve the quality of food production.

Molecular analysis of Staphylococcus aureus pathogenicity islands (SaPI) and their superantigens combination of food samples.

Staphylococcus aureus produces a wide variety of superantigenic activity Staphylococcal enterotoxins (SE) and they are a major cause of food poisoning. These superantigens are associated with mobile genetic elements such as plasmids, prophages and S. aureus pathogenicity islands (SaPI). The presence of well-known eight SaPI integrase and 13 enterotoxin genes (sea, seb, sec, sed, see, seg, seh, sei, sej, sel, sek, seq, and tst) in 93 S. aureus strains were investigated. All S. aureus isolates were characterized by pulsed-field gel electrophoresis (PFGE), and the genes were detected using five sets of multiplex PCR (mPCR). The most predominant toxin genes were sea (19%), seb (15%), sec (54%), sell (48%), selk (46%), selq (52%), seg (22%), and sei (19%). Analysis showed that many S. aureus isolates harbored multiple toxin genes. An mPCR-based assay was developed for the determination of all SaPI and their superantigen gene combinations. Twenty three isolates revealed the gene combination sec, sell and tst, typical of the SaPIbov1 and SaPIn1/m1 pathogenicity islands. Twelve isolates revealed the selk and selq gene combination consistent with SaPI3. Eight isolates exhibited the sec and sell genes without the tst gene typical of SaPImw2. We established a correlation between superantigenic toxin genotypes in S. aureus in terms of combinations of toxin gene-encoding SaPI. These results provide a rapid method for determining superantigenic toxin genotypes in S. aureus strains. A total of 24 PFGE patterns were generated. To our knowledge, this is a first study analyzing the correlation of all known SaPI and their enterotoxins in S. aureus using mPCR.

Expression and production of staphylococcal enterotoxin C is substantially reduced in milk.

Staphylococcal food poisoning is a global problem. The gene encoding enterotoxin C (sec) has been reported several times as the most frequent enterotoxin gene identified in food poisoning cases caused by contaminated milk. In this study, the expression of sec was examined during the growth of Staphylococcus aureus in milk compared to routinely used laboratory media. Additionally, expression of several regulatory genes (sarA, saeS, codY, srrA, rot, hld, agrA, sigB) and other five enterotoxin genes (sea, seg, seh, sek, sel) were observed. It has been well established for that S. aureus is able to grow in milk and we found significantly reduced expression of sec in milk compared to the laboratory medium (P < 0.05). Here, we report the first study providing a comprehensive view on the expression of enterotoxin genes and its regulation in milk. The milk environment dramatically changed the expression profiles of several enterotoxin genes although staphylococcal growth was not affected at all. The mechanism of the reduction may be explained by downregulation of the agr system, although other factors are expected to be involved. The constituent of milk causing the inhibitory effect remains unidentified.

Staphylococcus aureus mobile genetic elements.

Among the bacteria groups, most of them are known to be beneficial to human being whereas only a minority is being recognized as harmful. The pathogenicity of bacteria is due, in part, to their rapid adaptation in the presence of selective pressures exerted by the human host. In addition, through their genomes, bacteria are subject to mutations, various rearrangements or horizontal gene transfer among and/or within bacterial species. Bacteria's essential metabolic functions are generally encoding by the core genes. Apart of the core genes, there are several number of mobile genetic elements (MGE) acquired by horizontal gene transfer that might be beneficial under certain environmental conditions. These MGE namely bacteriophages, transposons, plasmids, and pathogenicity islands represent about 15% Staphylococcus aureus genomes. The acquisition of most of the MGE is made by horizontal genomic islands (GEI), recognized as discrete DNA segments between closely related strains, transfer. The GEI contributes to the wide spread of microorganisms with an important effect on their genome plasticity and evolution. The GEI are also involve in the antibiotics resistance and virulence genes dissemination. In this review, we summarize the mobile genetic elements of S. aureus.