Synthetic Strategies for the Selective Functionalization of Carbon Nanodots Allow Optically Communicating Suprastructures.

The surface of Carbon Nanodots (CNDs) stands as a rich chemical platform, able to regulate the interactions between particles and external species. Performing selective functionalization of these nanoscale entities is of practical importance, however, it still represents a considerable challenge. In this work, we exploited the organic chemistry toolbox to install target functionalities on the CND surface, while monitoring the chemical changes on the material's outer shell through nuclear magnetic resonance spectroscopy. Following this, we investigated the use of click chemistry to covalently connect CNDs of different nature en-route towards covalent suprastructures with unprecedent molecular control. The different photophysical properties of the connected particles allowed their optical communication in the excited state. This work paves the way for the development of selective and addressable CND building blocks which can act as modular nanoscale synthons that mirror the long-established reactivity of molecular organic synthesis.

2D Metal-Organic Framework Nanosheets based on Pd-TCPP as Photocatalysts for Highly Improved Hydrogen Evolution.

In this report, a 2D MOF nanosheet derived Pd single-atom catalyst, denoted as Pd-MOF, was fabricated and examined for visible light photocatalytic hydrogen evolution reaction (HER). This Pd-MOF can provide a remarkable photocatalytic activity (a H2 production rate of 21.3 mmol/gh in the visible range), which outperforms recently reported Pt-MOFs (with a H2 production rate of 6.6 mmol/gh) with a similar noble metal loading. Notably, this high efficiency of Pd-MOF is not due to different chemical environment of the metal center, nor by changes in the spectral light absorption. The higher performance of the Pd-MOF in comparison to the analogue Pt-MOF is attributed to the longer lifetime of the photogenerated electron-hole pairs and higher charge transfer efficiency.

Magnetic Polaron States in Photoluminescent Carbon Dots Enable Hydrogen Peroxide Photoproduction.

Photoactivation of aspartic acid-based carbon dots (Asp-CDs) induces the generation of spin-separated species, including electron/hole (e- /h+ ) polarons and spin-coupled triplet states, as uniquely confirmed by the light-induced electron paramagnetic resonance spectroscopy. The relative population of the e- /h+ pairs and triplet species depends on the solvent polarity, featuring a substantial stabilization of the triplet state in a non-polar environment (benzene). The electronic properties of the photoexcited Asp-CDs emerge from their spatial organization being interpreted as multi-layer assemblies containing a hydrophobic carbonaceous core and a hydrophilic oxygen and nitrogen functionalized surface. The system properties are dissected theoretically by density functional theory in combination with molecular dynamics simulations on quasi-spherical assemblies of size-variant flakelike model systems, revealing the importance of size dependence and interlayer effects. The formation of the spin-separated states in Asp-CDs enables the photoproduction of hydrogen peroxide (H2 O2 ) from water and water/2-propanol mixture via a water oxidation reaction.

Communication of molecular fluorophores with other photoluminescence centres in carbon dots.

The establishment of structure-photoluminescence (PL) relationships remains an ultimate challenge in the field of carbon dots (CDs). It is now commonly understood that various structural domains may evolve during the preparation of CDs; nonetheless, we are still far from capturing the specific features that determine the overall PL of CDs. Although the core, surface and molecular states are usually considered the three main sources of PL, it is not known to which extent they interact and/or affect one another. Expectedly, the communication between the different PL centres depends on the mutual arrangement and the type of linking. To gain insights into such a communication, time-dependent density functional theory (TD-DFT) calculations were performed for several (N-doped/O-functionalized) polyaromatic hydrocarbons (PAHs) as representative models for the core/surfaces PL states and the prototypical molecular fluorophore (MF) 5-oxo-1,2,3,5-tetrahydroimidazo-[1,2-α]-pyridine-7-carboxylic acid (IPCA), considering different interaction modes, namely hydrogen bonded and stacked complexes as well as covalently bonded and fused structures. Our results revealed that each of the studied arrangements in some way supported the communication between the PL centres. The deactivation pathways typically involve multiple charge and energy transfer events that can promote the formation of charge separated states and/or lead to the activation of other PL centres in CDs. Depending on the arrangement, the doping pattern and surface functionalization, both the CD core and the MF can act as an electron donor or acceptor, which could help to design CDs with desirable hole-electron surface/core characteristics.

Graphene Nanobeacons with High-Affinity Pockets for Combined, Selective, and Effective Decontamination and Reagentless Detection of Heavy Metals.

Access to clean water for drinking, sanitation, and irrigation is a major sustainable development goal of the United Nations. Thus, technologies for cleaning water and quality-monitoring must become widely accessible and of low-cost, while being effective, selective, sustainable, and eco-friendly. To meet this challenge, hetero-bifunctional nanographene fluorescent beacons with high-affinity pockets for heavy metals are developed, offering top-rated and selective adsorption for cadmium and lead, reaching 870 and 450 mg g-1 , respectively. The heterobifunctional and multidentate pockets also operate as selective gates for fluorescence signal regulation with sub-nanomolar sensitivity (0.1 and 0.2 nm for Pb2+ and Cd2+ , respectively), due to binding affinities as low as those of antigen-antibody interactions. Importantly, the acid-proof nanographenes can be fully regenerated and reused. Their broad visible-light absorption offers an additional mode for water-quality monitoring based on ultra-low cost and user-friendly reagentless paper detection with the naked-eye at a limit of detection of 1 and 10 ppb for Pb2+ and Cd2+ ions, respectively. This work shows that photoactive nanomaterials, densely-functionalized with strong, yet selective ligands for targeted contaminants, can successfully combine features such as excellent adsorption, reusability, and sensing capabilities, in a way to extend the material's applicability, its life-cycle, and value-for-money.

Uncovering the Role of Trioctylphosphine on Colloidal and Emission Stability of Sb-Alloyed Cs2NaInCl6 Double Perovskite Nanocrystals.

Doping and compositional tuning of Cs2AInCl6 (A = Ag, Na) double perovskite nanocrystals (PNCs) is considered a promising strategy toward the development of light-emitting sources for applications in solution-processed optoelectronic devices. Oleic acid and oleylamine are by far the most often used surface capping ligands for PNCs. However, the undesirable desorption of these ligands due to proton-exchange reaction during isolation and purification processing results in colloidal and structural instabilities. Thus, the improvement of colloidal and optical stability of PNCs represents one of the greatest challenges in the field. Here, we report a trioctylphosphine-mediated synthesis and purification method toward Sb-alloyed Cs2NaInCl6 PNCs with excellent stability and optical features. Nuclear magnetic resonance spectroscopy enabled one to explain the role of trioctylphosphine and to reveal the reaction mechanism during crystal nucleation and growth. Under the optimized reaction conditions, in situ-generated trioctylphosphonium chloride and benzoyl trioctylphosphonium chloride serve as highly reactive halide sources, while benzoyl trioctylphosphonium and oleylammonium cations together with the oleate anion serve as surface capping ligands, which are bound strongly to the PNC surface. The tightly bound ionic pair of oleylammonium oleate and benzoyl trioctylphosphonium chloride/oleate ligands allows one to obtain monodispersed bright-blue-emitting PNCs with high photoluminescence quantum yields exceeding 50% at an optimum Sb content (0.5%), which also exhibit long-term colloidal stability. The approach based on dual cationic ligand passivation of double PNCs opens the doors for applications in other systems with a potential to achieve higher stability along with superior optical properties.

Carbon Dots Detect Water-to-Ice Phase Transition and Act as Alcohol Sensors via Fluorescence Turn-Off/On Mechanism.

Highly fluorescent carbon nanoparticles called carbon dots (CDs) have been the focus of intense research due to their simple chemical synthesis, nontoxic nature, and broad application potential including optoelectronics, photocatalysis, biomedicine, and energy-related technologies. Although a detailed elucidation of the mechanism of their photoluminescence (PL) remains an unmet challenge, the CDs exhibit robust, reproducible, and environment-sensitive PL signals, enabling us to monitor selected chemical phenomena including phase transitions or detection of ultralow concentrations of molecular species in solution. Herein, we report the PL turn-off/on behavior of aqueous CDs allowing the reversible monitoring of the water-ice phase transition. The bright PL attributable to molecular fluorophores present on the CD surface was quenched by changing the liquid aqueous environment to solid phase (ice). Based on light-induced electron paramagnetic resonance (LEPR) measurements and density functional theory (DFT) calculations, the proposed kinetic model assuming the presence of charge-separated trap states rationalized the observed sensitivity of PL lifetimes to the environment. Importantly, the PL quenching induced by freezing could be suppressed by adding a small amount of alcohols. This was attributed to a high tendency of alcohol to increase its concentration at the CD/solvent interface, as revealed by all-atom molecular dynamics simulations. Based on this behavior, a fluorescence "turn-on" alcohol sensor for exhaled breath condensate (EBC) analysis has been developed. This provided an easy method to detect alcohols among other common interferents in EBC with a low detection limit (100 ppm), which has a potential to become an inexpensive and noninvasive clinically useful diagnostic tool for early stage lung cancer screening.

Purple-emissive carbon dots enhance sensitivity of Si photodetectors to ultraviolet range.

In this work, we achieved the synthesis of purple-emissive carbon dots (p-CDs) by a simple and highly reproducible route using folic acid as the sole precursor. The emission of the p-CDs is located around 390 nm, and is independent of the excitation wavelength with a high photoluminescence quantum yield of 54.6%, thus complementing an emission color palette of brightly emitting carbon dots with purple. The purple-emissive CDs are highly stable in both the colloidal state and in polymer films. A carbon dot luminescence down-shifting layer is used to sensitize a Si photodetector to the UV range. As an example, p-CDs with an excitation maximum at 330 nm were integrated into a Si photodetector, resulting in an improvement in the photoresponsivity in a UV range from 0.8 to 2.5 mA W-1, with a relative enhancement of 203.8%. This work is a cheap, scalable, and environmentally friendly way to create purple-emissive carbon dots, which enhance the photoresponsivity of commercial photodetectors in the UV range, thus being suitable for optical power meters, optical wireless communication systems, sunlight sensors, spectrophotometers, or radiation detectors.

A carbon dot-based tandem luminescent solar concentrator.

Luminescent solar concentrators (LSCs) are light-management devices and are used for harvesting and concentrating solar light from a large area to their edges. Being semitransparent devices, LSCs show great promise for future utilization in glass walls of urban buildings as environmentally friendly photovoltaic power plants. The development of cheap and eco-safe materials, the extension of the LSC operation range, and the enhancement of the optical efficiency are the key challenges, which need to be solved in order to transform energetically passive buildings into self-sustainable units. Herein, a large area (64 cm2) tandem LSC fabricated using entirely eco-friendly highly emissive blue, green, and red carbon dots is demonstrated, with an internal optical quantum efficiency of 23.6% and an external optical quantum efficiency of 2.3%, while maintaining a high transparency across the visible spectrum. This opens up a new direction for the application of carbon dots in advanced solar light harvesting technologies.