Thickness measurements of graphene oxide flakes using atomic force microscopy: results of an international interlaboratory comparison.

Flake thickness is one of the defining properties of graphene-related 2D materials (GR2Ms), and therefore requires reliable, accurate, and reproducible measurements with well-understood uncertainties. This is needed regardless of the production method or manufacturer because it is important for all GR2M products to be globally comparable. An international interlaboratory comparison on thickness measurements of graphene oxide flakes using atomic force microscopy has been completed in technical working area 41 of versailles project on advanced materials and standards. Twelve laboratories participated in the comparison project, led by NIM, China, to improve the equivalence of thickness measurement for two-dimensional flakes. The measurement methods, uncertainty evaluation and a comparison of the results and analysis are reported in this manuscript. The data and results of this project will be directly used to support the development of an ISO standard.

pH- and concentration-dependent supramolecular assembly of a fungal defensin plectasin variant into helical non-amyloid fibrils.

Self-assembly and fibril formation play important roles in protein behaviour. Amyloid fibril formation is well-studied due to its role in neurodegenerative diseases and characterized by refolding of the protein into predominantly ß-sheet form. However, much less is known about the assembly of proteins into other types of supramolecular structures. Using cryo-electron microscopy at a resolution of 1.97 Å, we show that a triple-mutant of the anti-microbial peptide plectasin, PPI42, assembles into helical non-amyloid fibrils. The in vitro anti-microbial activity was determined and shown to be enhanced compared to the wildtype. Plectasin contains a cysteine-stabilised α-helix-ß-sheet structure, which remains intact upon fibril formation. Two protofilaments form a right-handed protein fibril. The fibril formation is reversible and follows sigmoidal kinetics with a pH- and concentration dependent equilibrium between soluble monomer and protein fibril. This high-resolution structure reveals that α/ß proteins can natively assemble into fibrils.

Oligonucleotide Delivery across the Caco-2 Monolayer: The Design and Evaluation of Self-Emulsifying Drug Delivery Systems (SEDDS).

Oligonucleotides (OND) represent a promising therapeutic approach. However, their instability and low intestinal permeability hamper oral bioavailability. Well-established for oral delivery, self-emulsifying drug delivery systems (SEDDS) can overcome the weakness of other delivery systems such as long-term instability of nanoparticles or complicated formulation processes. Therefore, the present study aims to prepare SEDDS for delivery of a nonspecific fluorescently labeled OND across the intestinal Caco-2 monolayer. The hydrophobic ion pairing of an OND and a cationic lipid served as an effective hydrophobization method using either dimethyldioctadecylammonium bromide (DDAB) or 1,2-dioleoyl-3-trimethylammonium propane (DOTAP). This strategy allowed a successful loading of OND-cationic lipid complexes into both negatively charged and neutral SEDDS. Subjecting both complex-loaded SEDDS to a nuclease, the negatively charged SEDDS protected about 16% of the complexed OND in contrast to 58% protected by its neutral counterpart. Furthermore, both SEDDS containing permeation-enhancing excipients facilitated delivery of OND across the intestinal Caco-2 cell monolayer. The negatively charged SEDDS showed a more stable permeability profile over 120 min, with a permeability of about 2 × 10-7 cm/s, unlike neutral SEDDS, which displayed an increasing permeability reaching up to 7 × 10-7 cm/s. In conclusion, these novel SEDDS-based formulations provide a promising tool for OND protection and delivery across the Caco-2 cell monolayer.

Host factors abolish the need for polysaccharides and extracellular matrix-binding protein in Staphylococcus epidermidis biofilm formation.

Introduction. Staphylococcus epidermidis is predominant in implant-associated infections due to its capability to form biofilms. It can deploy several strategies for biofilm development using either polysaccharide intercellular adhesin (PIA), extracellular DNA (eDNA) and/or proteins, such as the extracellular matrix-binding protein (Embp).Hypothesis/Gap Statement. We hypothesize that the dichotomic regulation of S. epidermidis adhesins is linked to whether it is inside a host or not, and that in vitro biofilm investigations in laboratory media may not reflect actual biofilms in vivo.Aim. We address the importance of PIA and Embp in biofilm grown in 'humanized' media to understand if these components play different roles in biofilm formation under conditions where bacteria can incorporate host proteins in the biofilm matrix.Methodology. S. epidermidis 1585 WT (deficient in icaADBC), and derivative strains that either lack embp, express embp from an inducible promotor, or express icaADBC from a plasmid, were cultivated in standard laboratory media, or in media with human plasma or serum. The amount, structure, elasticity and antimicrobial penetration of biofilms was quantified to describe structural differences caused by the different matrix components and growth conditions. Finally, we quantified the initiation of biofilms as suspended aggregates in response to host factors to determine how quickly the cells aggregate in response to the host environment and reach a size that protects them from phagocytosis.Results. S. epidermidis 1585 required polysaccharides to form biofilm in laboratory media. However, these observations were not representative of the biofilm phenotype in the presence of human plasma. If human plasma were present, polysaccharides and Embp were redundant for biofilm formation. Biofilms formed in human plasma were loosely attached and existed mostly as suspended aggregates. Aggregation occurred after 2 h of exposing cells to plasma or serum. Despite stark differences in the amount and composition of biofilms formed by polysaccharide-producing and Embp-producing strains in different media, there were no differences in vancomycin penetration or susceptibility.Conclusion. We suggest that the assumed importance of polysaccharides for biofilm formation is an artefact from studying biofilms in laboratory media void of human matrix components. The cell-cell aggregation of S. epidermidis can be activated by host factors without relying on either of the major adhesins, PIA and Embp, indicating a need to revisit the basic question of how S. epidermidis deploys self-produced and host-derived matrix components to form antibiotic-tolerant biofilms in vivo.

Peak Force Infrared-Kelvin Probe Force Microscopy.

Correlative scanning probe microscopy of chemical identity, surface potential, and mechanical properties provide insight into the structure-function relationships of nanomaterials. However, simultaneous measurement with comparable and high resolution is a challenge. We seamlessly integrated nanoscale photothermal infrared imaging with Coulomb force detection to form peak force infrared-Kelvin probe force microscopy (PFIR-KPFM), which enables simultaneous nanomapping of infrared absorption, surface potential, and mechanical properties with approximately 10 nm spatial resolution in a single-pass scan. MAPbBr3 perovskite crystals of different degradation pathways were studied in situ. Nanoscale charge accumulations were observed in MAPbBr3 near the boundary to PbBr2 . PFIR-KPFM also revealed correlations between residual charges and secondary conformation in amyloid fibrils. PFIR-KPFM is applicable to other heterogeneous materials at the nanoscale for correlative multimodal characterizations.

Antifouling properties of layer by layer DNA coatings.

Fouling is a major concern for solid/liquid interfaces of materials used in different applications. One approach of fouling control is the use of hydrophilic polymer coatings made from poly-anions and poly-cations using the layer-by-layer (LBL) method. The authors hypothesized that the poly-anionic properties and the poly-phosphate backbone of DNA would provide anti-biofouling and anti-scaling properties. To this end, poly(ethyleneimine)/DNA LBL coatings against microbial and inorganic fouling were developed, characterized and evaluated. DNA LBL coatings reduced inorganic fouling from tap water by 90% when incubated statically or under flow conditions mimicking surfaces in heat exchangers. The coatings also impaired biofilm formation by 93% on stainless steel from tap water, and resulted in a 97% lower adhesion force and reduced initial attachment of the human pathogens Staphylococcus aureus, Staphylococcus epidermidis and Pseudomonas aeruginosa on glass. This study demonstrates a proof of concept that LBL coatings with poly-anions harboring phosphate groups can address fouling in several applications.

Toward Accurate Quantitative Elasticity Mapping of Rigid Nanomaterials by Atomic Force Microscopy: Effect of Acquisition Frequency, Loading Force, and Tip Geometry.

Atomic force microscopy (AFM) has emerged as a popular tool for the mechanical mapping of soft nanomaterials due to its high spatial and force resolution. Its applications in rigid nanomaterials, however, have been underexplored. In this work, we studied elasticity mapping of common rigid materials by AFM, with a focus on factors that affect the accuracy of elasticity measurements. We demonstrated the advantages in speed and noise level by using high frequency mechanical mapping compared to the classical force volume mapping. We studied loading force dependency, and observed a consistent pattern on all materials, where measured elasticity increased with loading force before stabilizing. Tip radius was found to have a major impact on the accuracy of measured elasticity. The blunt tip with 200 nm radius measured elasticity with deviation from nominal values up to 13% in different materials, in contrast to 122% by the sharp tip with 40 nm radius. Plastic deformation is believed to be the major reason for this difference. Sharp tips, however, still hold advantages in resolution and imaging capability for nanomaterials.

Ultra-dense polymer brush coating reduces Staphylococcus epidermidis biofilms on medical implants and improves antibiotic treatment outcome.

Staphylococcal biofilm formation is a severe complication of medical implants, leading to high antibiotic tolerance and treatment failure. Ultra-dense poly(ethylene glycol) (udPEG) coating resists adsorption of proteins, polysaccharides and extracellular DNA. It is therefore uniquely resistant to attachment by Staphylococcus epidermidis, which remains loosely adhered to the surface. Our aim was to determine if S. epidermidis remains susceptible to antibiotics when adhering to udPEG, and if udPEG coatings can improve the treatment outcome for implant-associated infections. We tested the in vitro efficacy of vancomycin treatment on recently adhered S. epidermidis AUH4567 on udPEG, conventional PEG or titanium surfaces using live/dead staining and microscopy. udPEG was then applied to titanium implants and inserted subcutaneously in mice and inoculated with S. epidermidis to induce infection. Mice were given antibiotic prophylaxis or a short antibiotic treatment. One group was given immunosuppressive therapy. After five days, implants and surrounding tissue were harvested for CFU enumeration. Only few S. epidermidis cells adhered to udPEG compared to conventional PEG and uncoated titanium, and a much lower fraction of cells on udPEG survived antibiotic treatment in vitro. In vivo, the bacterial load on implants in mice receiving vancomycin treatment was significantly lower on udPEG-coated compared to uncoated implants, also in neutropenic mice. Our results suggest that the improved outcome results from the coating's anti-adhesive properties that leads to less biofilm and increased efficacy of antibiotic treatment. Thus, the combination of udPEG with antibiotics is a promising strategy to prevent acute implant-associated infections that arise due to perioperative contaminations. STATEMENT OF SIGNIFICANCE: Infections of medical implants is an ever-present danger. Here, bacteria develop biofilms that cannot be eradicated with antibiotics. By using an ultra-dense polymer-brush coating (udPEG), bacterial attachment and the subsequent biofilm formation can be reduced, resulting in increased antibiotic susceptibility of bacteria surrounding the implant. udPEG combined with antibiotics proved to significantly reduce bacteria on implants inserted into mice, in our animal model. As the coating is not antibacterial per se, it does not induce antimicrobial resistance and its effect is independent of the bacterial species. Our results are encouraging for the prospect of preventing and treating implant-associated infections that arise due to perioperative contaminations.

Cell wall associated protein TasA provides an initial binding component to extracellular polysaccharides in dual-species biofilm.

Many bacteria in biofilm surround themselves by an extracellular matrix composed mainly of extracellular polysaccharide (EP), proteins such as amyloid-like fibers (ALF) and nucleic acids. While the importance of EP in attachment and acceleration of biofilm by a number of different bacterial species is well established, the contribution of ALF to attachment in multispecies biofilm remains unknown. The study presented here aimed to investigate the role of TasA, a precursor for ALF, in cell-cell interactions in dual-species biofilms of Bacillus subtilis and Streptococcus mutans. Expression of major B. subtilis matrix operons was significantly up-regulated in the presence of S. mutans during different stages of biofilm formation, suggesting that the two species interacted and modulated gene expression in each other. Wild-type B. subtilis expressing TasA adhered strongly to S. mutans biofilm, while a TasA-deficient mutant was less adhesive and consequently less abundant in the dual-species biofilm. Dextran, a biofilm polysaccharide, induced aggregation of B. subtilis and stimulated adhesion to S. mutans biofilms. This effect was only observed in the wild-type strain, suggesting that interactions between TasA and dextran-associated EP plays an important role in inter-species interactions during initial stages of multispecies biofilm development.

Epigallocatechin Gallate Remodels Overexpressed Functional Amyloids in Pseudomonas aeruginosa and Increases Biofilm Susceptibility to Antibiotic Treatment.

Epigallocatechin-3-gallate (EGCG) is the major polyphenol in green tea. It has antimicrobial properties and disrupts the ordered structure of amyloid fibrils involved in human disease. The antimicrobial effect of EGCG against the opportunistic pathogen Pseudomonas aeruginosa has been shown to involve disruption of quorum sensing (QS). Functional amyloid fibrils in P. aeruginosa (Fap) are able to bind and retain quorum-sensing molecules, suggesting that EGCG interferes with QS through structural remodeling of amyloid fibrils. Here we show that EGCG inhibits the ability of Fap to form fibrils; instead, EGCG stabilizes protein oligomers. Existing fibrils are remodeled by EGCG into non-amyloid aggregates. This fibril remodeling increases the binding of pyocyanin, demonstrating a mechanism by which EGCG can affect the QS function of functional amyloid. EGCG reduced the amyloid-specific fluorescent thioflavin T signal in P. aeruginosa biofilms at concentrations known to exert an antimicrobial effect. Nanoindentation studies showed that EGCG reduced the stiffness of biofilm containing Fap fibrils but not in biofilm with little Fap. In a combination treatment with EGCG and tobramycin, EGCG had a moderate effect on the minimum bactericidal eradication concentration against wild-type P. aeruginosa biofilms, whereas EGCG had a more pronounced effect when Fap was overexpressed. Our results provide a direct molecular explanation for the ability of EGCG to disrupt P. aeruginosa QS and modify its biofilm and strengthens the case for EGCG as a candidate in multidrug treatment of persistent biofilm infections.

Functional bacterial amyloid increases Pseudomonas biofilm hydrophobicity and stiffness.

The success of Pseudomonas species as opportunistic pathogens derives in great part from their ability to form stable biofilms that offer protection against chemical and mechanical attack. The extracellular matrix of biofilms contains numerous biomolecules, and it has recently been discovered that in Pseudomonas one of the components includes ß-sheet rich amyloid fibrils (functional amyloid) produced by the fap operon. However, the role of the functional amyloid within the biofilm has not yet been investigated in detail. Here we investigate how the fap-based amyloid produced by Pseudomonas affects biofilm hydrophobicity and mechanical properties. Using atomic force microscopy imaging and force spectroscopy, we show that the amyloid renders individual cells more resistant to drying and alters their interactions with hydrophobic probes. Importantly, amyloid makes Pseudomonas more hydrophobic and increases biofilm stiffness 20-fold. Deletion of any one of the individual members of in the fap operon (except the putative chaperone FapA) abolishes this ability to increase biofilm stiffness and correlates with the loss of amyloid. We conclude that amyloid makes major contributions to biofilm mechanical robustness.

Non-proteinaceous bacterial adhesins challenge the antifouling properties of polymer brush coatings.

Polymer brushes of poly(ethylene glycol) have long been considered the gold standard for antifouling surfaces that resist adsorption of biomolecules and attachment of microorganisms. However, despite displaying excellent resistance to protein adsorption, the polymer brush coatings cannot entirely avoid colonization by bacteria. Here we investigate and identify which non-proteinaceous bacterial adhesins challenge the antifouling properties of polymer brush coatings and how these challenges might be overcome. We quantified biofilm formation on a well-known polymer brush coating of poly(l-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG) on titanium. The coating successfully resisted colonization by Staphylococcus aureus and Pseudomonas aeruginosa, but not Staphylococcus epidermidis. This colonization pattern was also reflected on the adhesion forces measured on single bacterial cells. The biofilm produced from S. epidermidis on PLL-g-PEG were found to be rich in polysaccharides and extracellular DNA, and quantification of DNA, polysaccharides and proteins on PLL-g-PEG surfaces revealed that although the coating almost fully resisted protein adsorption, polysaccharides could adsorb, and exposure to DNA led to desorption of the polymer from the titanium surface. We hypothesized that this problem could be overcome by increasing the polymer brush density to better resist the penetration of DNA and polysaccharides into the polymer layer. Indeed, high density PLL-g-PEG brushes prepared by the recently discovered temperature-induced polyelectrolyte (TIP) grafting method resisted the interaction with DNA and polysaccharides, and therefore also the colonization by S. epidermidis. The TIP grafting is a simple improvement of PLL-g-PEG brush formation, and our results suggest that it provides an important advancement to the bacterial resistance by polymer brush coatings. STATEMENT OF SIGNIFICANCE: The antifouling properties of poly(ethylene glycol) brush coatings against protein adsorption are well documented, but it is not well understood why these coatings do not perform as well against bacterial colonization when tested against a wide range of species and over periods of days. Here we investigated bacterial colonization on poly(l-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG) grafted on Ti, and revealed that bacteria relying mostly on polysaccharides and extracellular DNA for adhesion and biofilm formation could successfully colonize PLL-g-PEG coated surfaces. The coatings could not resist adsorption of polysaccharides, and DNA could even desorb the coatings from the Ti surface. Fortunately, the shortcomings of conventional PLL-g-PEG could be overcome by increasing the graft density, using the recently discovered and very simple grafting method, 'temperature-induced polyelectrolyte (TIP) grafting'. Our study highlights that it is of utmost importance to develop coatings which resist adsoprtion of non-proteinaceous bacterial adhesins such as polysaccharides and DNA, and we demonstrated that TIP grafted high density PLL-g-PEG coatings are promising materials to achieve diverse bacterial resistance.

Responsive immunization and intervention for infectious diseases in social networks.

By using the microscopic Markov-chain approximation approach, we investigate the epidemic spreading and the responsive immunization in social networks. It is assumed that individual vaccination behavior depends on the local information of an epidemic. Our results suggest that the responsive immunization has negligible impact on the epidemic threshold and the critical value of initial epidemic outbreak, but it can effectively inhibit the outbreak of epidemic. We also analyze the influence of the intervention on the disease dynamics, where the vaccination is available only to those individuals whose number of neighbors is greater than a certain value. Simulation analysis implies that the intervention strategy can effectively reduce the vaccine use under the epidemic control.

Exploring the complex mechanical properties of xanthan scaffolds by AFM-based force spectroscopy.

The polysaccharide xanthan has been extensively studied owing to its potential application in tissue engineering. In this paper, xanthan scaffold structures were investigated by atomic force microscope (AFM) in liquid, and the mechanical properties of the complex xanthan structures were investigated by using AFM-based force spectroscopy (FS). In this work, three types of structures in the xanthan scaffold were identified based on three types of FS stretching events. The fact that the complex force responses are the combinations of different types of stretching events suggests complicated intermolecular interactions among xanthan fibrils. The results provide crucial information to understand the structures and mechanical properties of the xanthan scaffold.

Single-cell force spectroscopy of bacteria enabled by naturally derived proteins.

Bringing the study of bacterial adhesion down to a single-cell level is critical for understanding the molecular mechanisms involved in initial bacterial attachment. We have developed a simple and versatile method for making single-cell bacterial probes to study the adhesion of single bacterial cells by atomic force microscopy (AFM). A single-cell probe was made by picking up a bacterial cell from a glass surface using a tipless AFM cantilever coated with a commercial cell adhesive Cell-Tak. The method was applied to four different bacterial strains, and single-cell adhesion was measured on three surfaces (fresh glass, hydrophilic glass, and mica). Attachment to the cantilever was stable during the AFM force measurements that were conducted for 2 h, and viability was confirmed by Live/Dead fluorescence staining at the end of each experiment. The adhesion force and final rupture length were dependent on bacterial strains, surfaces properties, and contact time. The single-cell probe offers control of cell immobilization and thus holds advantages over the commonly used multicell probes with which random immobilization is obtained by submerging the cantilever in a bacterial suspension. The reported method provides a general platform for investigating single-cell interactions of bacteria with different surfaces and other cells by AFM force spectroscopy, thus improving our understanding of the mechanisms of bacterial attachment.

Comparative genomics reveals distinct host-interacting traits of three major human-associated propionibacteria.

BACKGROUND: Propionibacteria are part of the human microbiota. Many studies have addressed the predominant colonizer of sebaceous follicles of the skin, Propionibacterium acnes, and investigated its association with the skin disorder acne vulgaris, and lately with prostate cancer. Much less is known about two other propionibacterial species frequently found on human tissue sites, Propionibacterium granulosum and Propionibacterium avidum. Here we analyzed two and three genomes of P. granulosum and P. avidum, respectively, and compared them to two genomes of P. acnes; we further highlight differences among the three cutaneous species with proteomic and microscopy approaches. RESULTS: Electron and atomic force microscopy revealed an exopolysaccharide (EPS)-like structure surrounding P. avidum cells, that is absent in P. acnes and P. granulosum. In contrast, P. granulosum possesses pili-like appendices, which was confirmed by surface proteome analysis. The corresponding genes were identified; they are clustered with genes encoding sortases. Both, P. granulosum and P. avidum lack surface or secreted proteins for predicted host-interacting factors of P. acnes, including several CAMP factors, sialidases, dermatan-sulphate adhesins, hyaluronidase and a SH3 domain-containing lipoprotein; accordingly, only P. acnes exhibits neuraminidase and hyaluronidase activities. These functions are encoded on previously unrecognized island-like regions in the genome of P. acnes. CONCLUSIONS: Despite their omnipresence on human skin little is known about the role of cutaneous propionibacteria. All three species are associated with a variety of diseases, including postoperative and device-related abscesses and infections. We showed that the three organisms have evolved distinct features to interact with their human host. Whereas P. avidum and P. granulosum produce an EPS-like surface structure and pili-like appendices, respectively, P. acnes possesses a number of unique surface-exposed proteins with host-interacting properties. The different surface properties of the three cutaneous propionibacteria are likely to determine their colonizing ability and pathogenic potential on the skin and at non-skin sites.

Controlled assembly and release of retinoic acid based on the layer-by-layer method.

All-trans retinoic acid (RA) has been proved to play important roles in regulating cell growth in various types of cells. Yet most experiments were performed by adding RA in solution previously. In this Article, we focus on the incorporation of RA, as a negatively charged moiety, into layered polyelectrolyte films on surfaces by means of layer-by-layer (LbL) deposition, followed by adding of capping layers to regulate the release of RA from the films. The incorporated RA was designed to release over 5 days in buffer solution. The assembly and release of RA were verified by UV and QCM results. The controlled release of RA from multilayer films can serve as a model system to study the influence of small molecules on cell growth.

Ag-CuFe2O4 magnetic hollow fibers for recyclable antibacterial materials.

Copper ferrite (CuFe2O4) magnetic hollow fibers were prepared by applying an organic sol-thermal decomposition method, and silver nanoparticles were subsequently loaded on the fibers by calcination. The Ag-CuFe2O4 fibers exhibited excellent antibacterial efficacy against four different bacteria (E. coli, S. typhi, S. aureus and V. parahaemolyticus) with consistent results. Typical ferromagnetism behavior exhibited from the Ag-CuFe2O4 fibers enables their feasible recyclability.

Unconventional layer-by-layer assembly of graphene multilayer films for enzyme-based glucose and maltose biosensing.

We have developed an unconventional method for the layer-by-layer (LbL) assembly of graphene multilayer films. Unconventional LbL assembly was achieved by the following two-step process. Graphene sheets were modified by pyrene-grafted poly(acrylic acid) (PAA) in aqueous solution, and then the modified graphene sheets were used for layer-by-layer alternating deposition with poly(ethyleneimine) (PEI). The graphene-multilayer-film-modified electrode shows enhanced electron transfer for the redox reactions of Fe(CN)(6)(3-) and excellent electrocatalytic activity of H(2)O(2). On the basis of this property, a bienzyme biosensing system for the detection of maltose was fabricated by successive LbL assembly of graphene, glucose oxidase (GOx), and glucoamylase (GA). LbL assembly of graphene combines the excellent electrochemical properties of graphene and the versatility of LbL assembly, showing great promise in highly efficient sensors and advanced biosensing systems.

Combining hydrogen-bonding complexation in solution and hydrogen-bonding-directed layer-by-layer assembly for the controlled loading of a small organic molecule into multilayer films.

We have combined hydrogen-bonding complexation in solution and layer-by-layer assembly for the controlled loading of a water-insoluble small organic molecule, bis-triazine (DTA), an azobenzene derivative containing multiple hydrogen bond donors and acceptors, into layer-by-layer multilayer films of poly(acrylic acid) and diazo-resin. UV-visible spectroscopy indicates that DTA has been loaded into multilayer films, with the loading amount increasing linearly with the number of layers. The loading amount can be well tuned either by changing the concentration of DTA or the solvent composition at the complexation step. Fourier transform infrared spectroscopy has revealed that both the complexation and layer-by-layer assembly are driven by hydrogen bonding. After photo-cross-linking and immersion in dimethyl sulfoxide to release DTA, the film can serve as an absorbent for DTA. This study provides a new unconventional layer-by-layer assembly that combines hydrogen-bonding complexation in solution and hydrogen-bond-driven layer-by-layer assembly at the interface. This method provides a new route to load a variety of water-insoluble functional organic molecules into layer-by-layer films.