Mycorrhizas Affect Physiological Performance, Antioxidant System, Photosynthesis, Endogenous Hormones, and Water Content in Cotton under Salt Stress.

Saline-alkali stress seriously endangers the normal growth of cotton (Gossypium hirsutum). Arbuscular mycorrhizal fungi (AMF) could enhance salt tolerance by establishing symbiotic relationships with plants. Based on it, a pot experiment was conducted to simulate a salt environment in which cotton was inoculated with Paraglomus occultum to explore its effects on the saline-alkali tolerance of cotton. Our results showed that salt stress noticeably decreased cotton seedling growth parameters (such as plant height, number of leaves, dry weight, root system architecture, etc.), while AMF exhibited a remarkable effect on promoting growth. It was noteworthy that AMF significantly mitigated the inhibitory effect of salt on cotton seedlings. However, AMF colonization in root and soil hyphal length were collectively descended via salt stress. With regard to osmotic regulating substances, Pro and MDA values in roots were significantly increased when seedlings were exposed to salt stress, while AMF only partially mitigated these reactions. Salt stress increased ROS levels in the roots of cotton seedlings and enhanced antioxidant enzyme activity (SOD, POD, and CAT), while AMF mitigated the increases in ROS levels but further strengthened antioxidant enzyme activity. AMF inoculation increased the photosynthesis parameters of cotton seedling leaves to varying degrees, while salt stress decreased them dramatically. When inoculated with AMF under a salt stress environment, only partial mitigation of these photosynthesis values was observed. Under saline-alkali stress, AMF improved the leaf fluorescence parameters (φPSII, Fv'/Fm', and qP) of cotton seedlings, leaf chlorophyll levels, and root endogenous hormones (IAA and BR); promoted the absorption of water; and maintained nitrogen balance, thus alleviating the damage from salt stress on the growth of cotton plants to some extent. In summary, mycorrhizal cotton seedlings may exhibit mechanisms involving root system architecture, the antioxidant system, photosynthesis, leaf fluorescence, endogenous hormones, water content, and nitrogen balance that increase their resistance to saline-alkali environments. This study provide a theoretical basis for further exploring the application of AMF to enhance the salt tolerance of cotton.

Large-scale and stacked transfer of bilayers MoS2devices on a flexible polyimide substrate.

Two-dimensional transition metal dichalcogenides (TMDs), as flexible and stretchable materials, have attracted considerable attention in the field of novel flexible electronics due to their excellent mechanical, optical, and electronic properties. Among the various TMD materials, atomically thin MoS2has become the most widely used material due to its advantageous properties, such as its adjustable bandgap, excellent performance, and ease of preparation. In this work, we demonstrated the practicality of a stacked wafer-scale two-layer MoS2film obtained by transferring multiple single-layer films grown using chemical vapor deposition. The MoS2field-effect transistor cell had a top-gated device structure with a (PI) film as the substrate, which exhibited a high on/off ratio (108), large average mobility (∼8.56 cm2V-1s-1), and exceptional uniformity. Furthermore, a range of flexible integrated logic devices, including inverters, NOR gates, and NAND gates, were successfully implemented via traditional lithography. These results highlight the immense potential of TMD materials, particularly MoS2, in enabling advanced flexible electronic and optoelectronic devices, which pave the way for transformative applications in future-generation electronics.

High-Quality Genome Assembly and Genome-Wide Association Study of Male Sterility Provide Resources for Flax Improvement.

Flax is an economic crop with a long history. It is grown worldwide and is mainly used for edible oil, industry, and textiles. Here, we reported a high-quality genome assembly for "Neiya No. 9", a popular variety widely grown in China. Combining PacBio long reads, Hi-C sequencing, and a genetic map reported previously, a genome assembly of 473.55 Mb was constructed, which covers ~94.7% of the flax genome. These sequences were anchored onto 15 chromosomes. The N50 lengths of the contig and scaffold were 0.91 Mb and 31.72 Mb, respectively. A total of 32,786 protein-coding genes were annotated, and 95.9% of complete BUSCOs were found. Through morphological and cytological observation, the male sterility of flax was considered dominant nuclear sterility. Through GWAS analysis, the gene LUSG00017705 (cysteine synthase gene) was found to be closest to the most significant SNP, and the expression level of this gene was significantly lower in male sterile plants than in fertile plants. Among the significant SNPs identified in the GWAS analysis, only two were located in the coding region, and these two SNPs caused changes in the protein encoded by LUSG00017565 (cysteine protease gene). It was speculated that these two genes may be related to male sterility in flax. This is the first time the molecular mechanism of male sterility in flax has been reported. The high-quality genome assembly and the male sterility genes revealed, provided a solid foundation for flax breeding.

Estimation of surface free energy at microstructured surface to investigate intermediate wetting state for partial wetting model.

While partial wetting at nano-/microstructured surfaces can be described using the intermediate wetting state between the Cassie-Baxter and Wenzel states, the limitations of the partial wetting model remain unclear. In this study, we performed surface free energy analysis at a microstructured Si-water interface from both theoretical and experimental viewpoints. We experimentally measured the water contact angle on microstructured Si surfaces with square holes and compared the measured values with theoretical predictions. Furthermore, the surface free energy was analyzed using the effective wetting area estimated from the measured contact angle and electrochemical impedance spectroscopy results. We verified the validity of the partial wetting model for fabricated Si surfaces with a hole aperture a less than 230 µm and a hole height h of 12 µm, and for a < 400 µm, h = 40 µm. The model was found to be applicable to microstructured Si surfaces with a/h < 10.

Changes in the Microbial Community in Maize (Zea mays L.) Root Spatial Structure Following Short-Term Nitrogen Application.

The beneficial interactions between crop roots and microbiomes play a key role in crop nutrient availability, growth promotion, and disease suppression. Recent research, however, rarely reported the effects of nitrogen (N) application rate on microbial community composition at different spatial structures in the maize root zone. Therefore, one experiment was conducted to examine the influence of three N-application levels (0, 180, and 360 kg N ha-1) on microbial community composition in three root-associated compartments of maize (bulk soil, rhizoplane, and endosphere). The microbial diversity and community composition differed significantly among the various compartments. The effects of N application on fungal composition decreased in the order bulk soil > rhizosphere > endosphere at different sampling positions. Also, the fungal composition was more sensitive to the N-fertilizer rate in the bulk soil and the rhizosphere than the bacterial community. A total of 14.42, 9.46, and 3.55% of all taxonomic groups were sensitive to N fertilizer, respectively. The keystone species fungal groups were Humicola (bulk soil), Gibberella (rhizosphere soil), and Humicola (endosphere). Together, our results demonstrate that compared with that of the bacterial community, the fungal community composition was more susceptible to different N-application rates. N fertilization affected the distribution of microflora by changing soil physicochemical properties and enzyme activities. There were strong correlations between microbial communities in maize under the N180 treatment. Moreover, the N180 treatment had the maximum fresh yield and biomass at 64.5 and 24.3 kg·ha-1, respectively.

Chemical Constituents of Cyperus esculentus Leaves and the Protective Effect against Agricultural Fungicide-Induced Hepatotoxicity.

Cyperus esculentus is cultivated as a crop plant due to its edible and oily tubers (tiger nut). However, little is known about the phytochemicals and bioeffects of the leaves. This study was conducted to identify and quantify the chemical constituents of C. esculentus leaves and evaluate their bioactivities. By liquid chromatography-mass spectrometry, 30 compounds including flavan-3-ols, caffeic acid derivatives, and flavones, were identified from the leaves. The quantitative analysis revealed that gallocatechin (8), procyanidin B1 (15), catechin (16), chlorogenic acid (19), orientin (30), and luteolin 7-O-glucuronide (31) are the major chemical constituents of C. esculentus leaves. The contents of these six chemical constituents in the leaves collected in September in Hohhot, China, reached to 1460.85±7.66, 10178.77±302.65, 1048.35±17.37, 1722.15±26.13, 5318.62±277.16, and 1526.54±11.95 µg, respectively, in one gram of the dried leaves. The leaf extract (CELE) showed strong antioxidant activity in vitro, with compounds 8, 15, and 19 contributing the most. CELE showed significant protection against the agricultural fungicide tebuconazole-induced developmental toxicity and hepatotoxicity in zebrafish.

Quantification and purification of procyanidin B1 from food byproducts.

The flavan-3-ols of 10 primarily plant food byproducts, including Muscat Hamburg grape seed, hawthorn sarcocarp, litchi pericarp, cocoa bean, peanut skin, lotus seedpod, Xinyang Maojian green tea, Cinnamomi cortex, Sargentodoxa cuneata stem, and Cyperus esculentus, leaves were analyzed. Ultrahigh-performance liquid chromatography-triple quadrupole mass spectrometry was used for the analysis. Cyperus esculentus leaves contained a high amount of procyanidin B1 (198.9 mg/100 g), second only to Muscat Hamburg grape seed (292.9 mg/100 g). Unlike grape seed that contained several procyanidin B isomers with very similar retention times, C. esculentus leaves contained primarily procyanidin B1 with few isomers. Procyanidin B1 was enriched in the ethyl acetate fraction of a 70% methanol extract of C. esculentus leaves and purified at 95% purity by two runs of open column chromatography. Direct chromatography of the plant extract on octadecylsilane and Sephadex LH20 open columns improved the yield of the resultant leaf procyanidin B1 (95% purity) to 0.21‰. The present research demonstrated that the leaves of C. esculentus, byproducts of tigernut, are ideal plant sources for isolating and providing high-purity procyanidin B1. PRACTICAL APPLICATION: Procyanidin B1 has a broad range of health benefits. Cyperus esculentus is cultivated in many countries with nearly 6190 square hectares (hm2 ) in the Spanish Mediterranean region in 2020-2021 and over 16,700 hm2 in China in recent years, primarily for its tubers. The byproducts, the leaves of C. esculentus, contain high levels of procyanidin B1, with few isomers that interfere with its isolation and purification. Thus, the leaves of this plant provide a viable source for preparing high-purity procyanidin B1.

Effects of Enzymatic Modification and Cross-Linking with Sodium Phytate on the Structure and Physicochemical Properties of Cyperus esculentus Starch.

In this study, C. esculentus porous starch (PS) and C. esculentus cross-linked porous starch (CPS) were prepared by enzymatic modification and sodium phytate cross-linking, and their physicochemical and structural properties were determined. The results showed that the adsorption and emulsification capacities of PS were 1.3606 g/g and 22.6 mL/g, respectively, which were significantly higher than 0.5419 g/g and 4.2 mL/g of C. esculentus starch (NS). The retrogradation curves of starch paste showed that the stability of PS was inferior to that of NS. In addition, the results of texture analysis showed that the gel strength of PS was also significantly reduced relative to NS. The PS exhibited a rough surface with pores and low molecular order and crystallinity according to scanning electron microscope (SEM), fourier infrared spectroscopy (FTIR), and X ray diffractometer (XRD) analyses. As compared to PS, CPS still presented a high adsorption capacity of 1.2744 g/g and the steadiness of starch paste was significantly better. XPS demonstrated the occurrence of the cross-linking reaction. Our results show that enzyme modification and dual modification by combining enzymatic treatment with sodium phytate cross-linking can impart different structures and functions to starch, creating reference material for the application of modified starch from C. esculentus.

Enhancement of Casimir Friction between Graphene-Covered Topological Insulator.

Casimir friction is theoretically studied between graphene-covered undoped bismuth selenide (Bi2Se3) in detail. In the graphene/Bi2Se3 composite structure, the coupling of the hyperbolic phonon polaritons supported by Bi2Se3 with the surface plasmons supported by graphene can lead to the hybrid surface plasmon-phonon polaritons (SPPPs). Compared with that between undoped Bi2Se3, Casimir friction can be enhanced by more than one order of magnitude due to the contribution of SPPPs. It is found that the chemical potential that can be used to modulate the optical characteristic of SPPPs plays an important role in Casimir friction. In addition, the Casimir friction between doped Bi2Se3 is also studied. The friction coefficient between doped Bi2Se3 can even be larger than that between graphene-covered undoped Bi2Se3 for suitable chemical potential due to the contribution of unusual electron surface states. The results obtained in this work are not only beneficial to the study of Casimir frictions but also extend the research ranges of topological insulators.

Enhancement of lateral Casimir force on a rotating particle near hyperbolic metamaterial.

Enhancement of weak Casimir forces is extremely important for their practical detection and subsequent applications in variety of scientific and technological fields. We study the lateral Casimir forces acting on the rotating particles with small radius of 50 nm as well as that with large radius of 500 nm near the hyperbolic metamaterial made of silicon carbide (SiC) nanowires. It is found that the lateral Casimir force acting on the small particle of 50 nm near hyperbolic metamaterial with appropriate filling fraction can be enhanced nearly four times comparing with that acting on the same particle near SiC bulk in the previous study. Such enhancement is caused by the coupling between the resonance mode excited by nanoparticle and the hyperbolic mode supported by hyperbolic metamaterial. The results obtained in this study provide an efficient method to enhance the interaction of nanoscale objects.

Administration of olaquindox impairs spermatogenesis and sperm quality by increasing oxidative stress and early apoptosis in mice.

Olaquindox (OLA), a potent antibacterial agent, has been widely used as a feed additive and growth promoter in animal husbandry. Our previous study has shown that OLA administration in female mice could markedly cause sub-fertility. Here we established the model in male mice to investigate the toxic effects of OLA on mammalian spermatozoa quality and fetal development. After continuous 45 days of OLA gavage, the dosage of 60 mg/kg/day (high dose) significantly affected body weight, organ weights and coefficients, and the morphology of the testis seminiferous tubule in male mice. Dosage of 60 mg/kg/day also reduced sperm count, motility, and viability. OLA at both low-dose (5 mg/kg/day) and high-dose induced peroxidation, early apoptosis, and abnormal mitochondrial membrane potential in sperm. Significantly, high-dose OLA impaired in vitro fertilized embryo development, indicated by the decreased percentages of 2-cell and blastocyst formation. Surprisingly, the natural fertility of males was unaffected after OLA gavage, which was indicated by the comparable litter size after mating. However, paternal gavage of OLA significantly decreased the survival rate of the offspring from the age of 4 weeks. In sum, our study showed that OLA gavage in male mice damages sperm quality and offspring survival, illustrating the use of OLA as a feed additive should be strictly restricted.

Denoising in SVD-based ghost imaging.

By the method of singular-valued decomposition (SVD), ghost imaging (GI) reconstructs the images with high efficiency. However, a small amount of noise can greatly degrade or even destroy the object information. In this paper, we experimentally investigate the method of truncated SVD (TSVD) by selecting the first few largest singular values to enhance the image quality. The contrast-to-noise ratio and structural similarity of the images are improved with appropriate truncation ratios. To further improve the image quality, we analyze the noise effects on TSVD-based GI and introduce additional filters. TSVD-based GI may find its applications in rapid imaging under complicated environment conditions.

Steam explosion pretreatment enhancing enzymatic digestibility of overground tubers of tiger nut (Cyperus esculentus L.).

Introduction: Tiger nut (TN) is recognized as a high potential plant which can grow in well-drained sandy or loamy soils and provide food nutrients. However, the overground tubers of TN remain unutilized currently, which limits the value-added utilization and large-area cultivation of this plant. Methods: In the present study, the overground tubers of TN were subjected to enzymatic hydrolysis to produce fermentable sugars for biofuels production. Steam explosion (SE) was applied to modify the physical-chemical properties of the overground tubers of TN for enhancing its saccharification. Results and discussion: Results showed that SE broke the linkages of hemicellulose and lignin in the TN substrates and increased cellulose content through removal of hemicellulose. Meanwhile, SE cleaved inner linkages within cellulose molecules, reducing the degree of polymerization by 32.13-77.84%. Cellulose accessibility was significantly improved after SE, which was revealed visibly by the confocal laser scanning microscopy imaging techniques. As a result, enzymatic digestibility of the overground tubers of TN was dramatically enhanced. The cellulose conversion of the SE treated TN substrates reached 38.18-63.97%, which was 2.5-4.2 times higher than that without a SE treatment. Conclusion: Therefore, SE pretreatment promoted saccharification of the overground tubers of TN, which paves the way for value-added valorization of the TN plants.

Characteristics of Lumbar Bone Density in Middle-Aged and Elderly Subjects: A Correlation Study between T-Scores Determined by the DEXA Scan and Hounsfield Units from CT.

Purpose: To describe the characteristics of lumbar bone density in middle-aged and elderly subjects and explore whether there is a correlation between computed tomography (CT) values and the bone mineral density (BMD) T-scores of the lumbar vertebral cancellous bone. Methods: Forty-two subjects, including 25 males and 17 females, with a mean age of 56 years, who underwent BMD measurement and lumbar multislice spiral CT scan at the China Rehabilitation Research Center from January 2019 to December 2019 were selected. Dual-energy X-ray absorptiometry (DEXA) was applied to obtain the total BMD T-scores of the lumbar L1-L4 vertebrae. Results: The CT values decreased from L1 to L4 and were 145.91 ± 8.686 HU, 143.18 ± 8.598 HU, 137.39 ± 8.276 HU, and 135.23 ± 8.219 HU, respectively. The total CT value of L1-L4 was 140.43 ± 4.199 HU. The mean total BMD T-score of L1-L4 was -0.94. The CT values of the L1-L4 vertebrae were positively correlated with the total BMD T-scores of L1-L4 (r = 0.349, P < 0.001). The CT value of the left third of the same vertebrae was the highest, and there was a strong positive correlation between the regional CT value of the lumbar spine and the entire vertebra CT values (r > 0.7). Conclusion: The CT values of the lumbar spine can assist the measurement of the T-scores of lumbar BMD, which could aid in early opportunistic screening for osteopenia and preventing osteoporosis and vertebral compression fractures in middle-aged and elderly subjects. This trial is registered with ChiCTR2100049571.

Physical-chemical properties of cell wall interface significantly correlated to the complex recalcitrance of corn straw.

BACKGROUND: Tissue heterogeneity significantly influences the overall saccharification efficiency of plant biomass. However, the mechanisms of specific organ or tissue recalcitrance to enzymatic deconstruction are generally complicated and unclear. A multidimensional analysis of the anatomical fraction from 12 corn cultivars was conducted to understand the essence of recalcitrance. RESULTS: The results showed that leaf, leaf sheath, stem pith and stem rind of corn straw exhibited remarkable heterogeneity in chemical composition, physical structure and cell type, which resulted in the different saccharification ratio of cellulose. The high saccharification ratio ranging from 21.47 to 38.96% was in stem pith, whereas the low saccharification ratio ranging from 17.1 to 27.43% was in leaf sheath. High values of lignin, hemicelluloses, degree of polymerization and crystallinity index were critical for the increased recalcitrance, while high value of neutral detergent soluble and pore size generated weak recalcitrance. Interestingly, pore traits of cell wall, especial for microcosmic interface structure, seemed to be a crucial factor that correlated to cellulase adsorption and further affected saccharification. CONCLUSIONS: Highly heterogeneity in cell wall traits influenced the overall saccharification efficiency of biomass. Furthermore, the holistic outlook of cell wall interface was indispensable to understand the recalcitrance and promote the biomass conversion.

The identification of grain size genes by RapMap reveals directional selection during rice domestication.

Cloning quantitative trait locus (QTL) is time consuming and laborious, which hinders the understanding of natural variation and genetic diversity. Here, we introduce RapMap, a method for rapid multi-QTL mapping by employing F2 gradient populations (F2GPs) constructed by minor-phenotypic-difference accessions. The co-segregation standard of the single-locus genetic models ensures simultaneous integration of a three-in-one framework in RapMap i.e. detecting a real QTL, confirming its effect, and obtaining its near-isogenic line-like line (NIL-LL). We demonstrate the feasibility of RapMap by cloning eight rice grain-size genes using 15 F2GPs in three years. These genes explain a total of 75% of grain shape variation. Allele frequency analysis of these genes using a large germplasm collection reveals directional selection of the slender and long grains in indica rice domestication. In addition, major grain-size genes have been strongly selected during rice domestication. We think application of RapMap in crops will accelerate gene discovery and genomic breeding.

Research on the role of LuxS/AI-2 quorum sensing in biofilm of Leuconostoc citreum 37 based on complete genome sequencing.

Leuconostoc citreum, a type of food-grade probiotic bacteria, plays an important role in food fermentation and intestinal probiotics. Biofilms help bacteria survive under adverse conditions, and LuxS/AI-2-dependent quorum sensing (QS) plays an important role in the regulation of their biofilm-forming activities. L. citreum 37 was a biofilm-forming strain isolated from dairy products. The aim of this study was to analyze genes involved in the LuxS/AI-2 system based on genome sequencing and biofilm formation of L. citreum 37. Genome assembly yielded two contigs (one chromosome and one plasmid), and the complete genome contained 1,946,279 base pairs (bps) with a G + C content of 38.91%. The genome sequence analysis showed that there were several pathways such as the two-component system, QS, and seven other signal pathways, and 26 genes (including luxS, pfs, and 24 other genes) may participate in QS related to biofilm formation. All these results showed that the LuxS/AI-2 system is complete in the genome of L. citreum 37. The quantitative polymerase chain reaction (qPCR) of pfs, luxS genes, and AI-2 production of L. citreum 37 in planktonic state and biofilm state showed that the expression of pfs and luxS genes was consistent with the production of AI-2 and was positively correlated with biofilm formation. After luxS of L. citreum 37 expressed in Escherichia coli BL21, AI-2 production was detected, suggesting that the luxS gene played an important role in AI-2 synthesis, Therefore, luxS may regulate the biofilm formation of L. citreum 37 by participating in AI-2 synthesis. It is projected that results of this study could help facilitate further understanding and application of L. citreum 37. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s13205-021-02747-2.

Clathrin Heavy Chain 1 Plays Essential Roles During Oocyte Meiotic Spindle Formation and Early Embryonic Development in Sheep.

As a major protein of the polyhedral coat of coated pits and vesicles, clathrin molecules have been shown to play a stabilization role for kinetochore fibers of the mitotic spindle by acting as inter-microtubule bridges. Clathrin heavy chain 1 (CLTC), the basic subunit of the clathrin coat, plays vital roles in both spindle assembly and chromosome congression during somatic-cell mitosis. However, its function in oocyte meiotic maturation and early embryo development in mammals, especially in domesticated animals, has not been fully investigated. In this study, the expression profiles and functional roles of CLTC in sheep oocytes were investigated. Our results showed that the expression of CLTC was maintained at a high level from the germinal vesicle (GV) stage to metaphase II stage and that CLTC was distributed diffusely in the cytoplasm of cells at interphase, from the GV stage to the blastocyst stage. After GV breakdown (GVBD), CLTC co-localized with beta-tubulin during metaphase. Oocyte treatments with taxol, nocodazole, or cold did not affect CLTC expression levels but led to disorders of its distribution. Functional impairment of CLTC by specific morpholino injections in GV-stage oocytes led to disruptions in spindle assembly and chromosomal alignment, accompanied by impaired first polar body (PB1) emissions. In addition, knockdown of CLTC before parthenogenetic activation disrupted spindle formation and impaired early embryo development. Taken together, the results demonstrate that CLTC plays a vital role in sheep oocyte maturation via the regulation of spindle dynamics and an essential role during early embryo development.

Mechanical modulation of spontaneous emission of nearby nanostructured black phosphorus.

In this study, we investigate the spontaneous emission of a quantum emitter nearby black phosphorus (BP) sheet. The spontaneous emission can be modulated mechanically by rotating the BP sheet when the quantum emitter is placed parallel to the sheet. The spontaneous emission is dependent on the electron doping and rotation angle of BP with respect to the x-axis. The Purcell factor decreases with the increase in rotation angle under smaller electron doping. The Purcell factor increases with the increase in rotation angle under larger electron doping. The spontaneous emission of quantum emitter nearby two types of BP ribbon arrays tailored along armchair (type I) and zigzag (type II) directions is studied in detail. The spontaneous emission of quantum emitter parallel to type I is enhanced compared with that parallel to BP sheet. The spontaneous emission decreases remarkably for the quantum emitter parallel to type II compared with that parallel to BP sheet. The spontaneous emission can be flexibly modulated by rotating BP ribbon arrays mechanically in two types. The results obtained in this study provide a new method to actively modulate the spontaneous emission.

Measurement of effective wetting area at hydrophobic solid-liquid interface.

HYPOTHESES: The effective wetting area, a parameter somewhat different from the apparent contact area at solid-liquid interfaces, plays a significant role in surface wettability. However, determination of the effective wetting area for hydrophobic surfaces remains an open question. In the present study, we developed an electrochemical impedance method to evaluate the effective wetting area at a hydrophobic solid-liquid interface. EXPERIMENTS: Patterned Si surfaces were prepared using the anisotropic wet etching method, and the water contact angle and electrochemical impedance were measured experimentally. The effective wetting area at the solid-liquid interface was examined based on the wettability and impedance results. FINDINGS: The electrochemical impedance for the patterned Si surfaces increased with increasing surface hydrophobicity, whereas the effective wetting area decreased. The intermediate wetting state (i.e. partial wetting model) was confirmed at the patterned Si surfaces, and the effective wetting area was theoretically estimated. The effective wetting area predicted from the electrochemical impedance agreed well with that predicted from the partial wetting model, thereby demonstrating the validity of the electrochemical impedance method for evaluating the effective wetting area at the hydrophobic solid-liquid interface.