Isomeric Porous Cu(I) Triazolate Frameworks Showing Periodic and Aperiodic Flexibility for Efficient CO Separation.

Guest-induced (crystal-to-crystal) transformation, i.e., periodic flexibility, is a typical feature of molecule-based crystalline porous materials, but its role for adsorptive separation is controversial. On the other hand, aperiodic flexibility is rarely studied. This work reports a pair of isomeric Cu(I) triazolate frameworks, namely, α-[Cu(fetz)] (MAF-2Fa) and ß-[Cu(fetz)] (MAF-2Fb), which show typical periodic and aperiodic flexibility for CO chemical adsorption, respectively. Quantitative mixture breakthrough experiments show that, while MAF-2Fa exhibits high adsorption capacity at high pressures but negligible adsorption below the threshold pressure and with leakage concentrations of 3-8%, MAF-2Fb exhibits relatively low adsorption capacity at high pressures but no leakage (residual CO concentration <1 ppb). Tandem connection of MAF-2Fa and MAF-2Fb can combine their advantages of high CO adsorption capacities at high and low pressures, respectively. MAF-2Fa and MAF-2Fb can both keep the separation performances unchanged at high relative humidities, but only MAF-2Fb shows a unique coadsorption behavior at a relative humidity of 82%, which can be used to improve purification performances.

Molecular-Sieving Separation of Methanol/Benzene Azeotrope by a Flexible Metal-Organic Framework.

Separation of methanol/benzene azeotrope mixtures is very challenging not only by the conventional distillation technique but also by adsorbents. In this work, we design and synthesize a flexible Ca-based metal-organic framework MAF-58 consisting of cheap raw materials. MAF-58 shows selective methanol-induced pore-opening flexibility. Although the opened pores are large enough to accommodate benzene molecules, MAF-58 shows methanol/benzene molecular sieving with ultrahigh experimental selectivity, giving 5.1 mmol g-1 high-purity (99.99%+) methanol and 2.0 mmol g-1 high-purity (99.97%+) benzene in a single adsorption/desorption cycle. Computational simulations reveal that the preferentially adsorbed, coordinated methanol molecules act as the gating component to selectively block the diffusion of benzene, offering a new gating adsorption mechanism.

Quasi-open Cu(I) sites for efficient CO separation with high O2/H2O tolerance.

Carbon monoxide (CO) separation relies on chemical adsorption but suffers from the difficulty of desorption and instability of open metal sites against O2, H2O and so on. Here we demonstrate quasi-open metal sites with hidden or shielded coordination sites as a promising solution. Possessing the trigonal coordination geometry (sp2), Cu(I) ions in porous frameworks show weak physical adsorption for non-target guests. Rational regulation of framework flexibility enables geometry transformation to tetrahedral geometry (sp3), generating a fourth coordination site for the chemical adsorption of CO. Quantitative breakthrough experiments at ambient conditions show CO uptakes up to 4.1 mmol g-1 and CO selectivity up to 347 against CO2, CH4, O2, N2 and H2. The adsorbents can be completely regenerated at 333-373 K to recover CO with a purity of >99.99%, and the separation performances are stable in high-concentration O2 and H2O. Although CO leakage concentration generally follows the structural transition pressure, large amounts (>3 mmol g-1) of ultrahigh-purity (99.9999999%, 9N; CO concentration < 1 part per billion) gases can be produced in a single adsorption process, demonstrating the usefulness of this approach for separation applications.

Atomically Dispersed Dual-Metal Sites Showing Unique Reactivity and Dynamism for Electrocatalysis.

The real structure and in situ evolution of catalysts under working conditions are of paramount importance, especially for bifunctional electrocatalysis. Here, we report asymmetric structural evolution and dynamic hydrogen-bonding promotion mechanism of an atomically dispersed electrocatalyst. Pyrolysis of Co/Ni-doped MAF-4/ZIF-8 yielded nitrogen-doped porous carbons functionalized by atomically dispersed Co-Ni dual-metal sites with an unprecedented N8V4 structure, which can serve as an efficient bifunctional electrocatalyst for overall water splitting. More importantly, the electrocatalyst showed remarkable activation behavior due to the in situ oxidation of the carbon substrate to form C-OH groups. Density functional theory calculations suggested that the flexible C-OH groups can form reversible hydrogen bonds with the oxygen evolution reaction intermediates, giving a bridge between elementary reactions to break the conventional scaling relationship.

Water-Stable Metal Azolate Frameworks Showing Interesting Flexibilities for Highly Effective Bioethanol Dehydration.

The ethanol/water separation challenge highlights the adsorption capacity/selectivity trade-off problem. We show that the target guest can serve as a gating component of the host to block the undesired guest, giving molecular sieving effect for the adsorbent possessing large pores. Two hydrophilic/water-stable metal azolate frameworks were designed to compare the effects of gating and pore-opening flexibility. Large amounts (up to 28.7 mmol g-1 ) of ethanol with fuel-grade (99.5 %+) and even higher purities (99.9999 %+) can be produced in a single adsorption process from not only 95 : 5 but also 10 : 90 ethanol/water mixtures. More interestingly, the pore-opening adsorbent possessing large pore apertures showed not only high water adsorption capacity but also exceptionally high water/ethanol selectivity characteristic of molecular sieving. Computational simulations demonstrated the critical role of guest-anchoring aperture for the guest-dominated gating process.

Spatial distribution and health risk assessment of heavy metals in drinking water of rural schools in Henan Province / 中国学校卫生

Objective@#To evaluate health risks of five heavy metals in drinking water of rural schools in Henan Province, so as to provide scientific basis for drinking water safety in rural schools.@*Methods@#Totally 1 269 drinking water samples were collected and analyzed for five heavy metals (As, Cd, Cr 6+ , Pb, Hg) concentration in 106 cities and counties of Henan Province, and its spatial distribution characteristics were explored by geographic information system (GIS). Risk assessment method recommended by the United States Environmental Protection Agency (U.S. EPA) was applied to evaluate health risks from five heavy metals through oral ingestion.@*Results@#The qualified rate of As concentration was 100%, and the qualified rates of Cd, Cr 6+ , Pb and Hg were 99.9% , 99.9%, 99.5%, 99.6%. The highest carcinogenic risk was As (3.05×10 -5 ), followed by Cr 6+ (2.73×10 -5 ), and the highest non carcinogenic risk was As (0.158 3), followed by Pb(0.041 7). The carcinogenic risk and non carcinogenic risk were all higher in girls than boys. The carcinogenic and non carcinogenic risks were differences in different regions( P <0.05).@*Conclusion@#Health risks of five heavy metals in drinking water for rural schools in Henan Province were within the acceptable risk level recommended by EPA. As, Cr 6+ and Pb were the main health risk factors in drinking water, and that might impact negatively the healthy growth of primary and middle school students. These should be future efforts of drinking water safety management.

Nutritional status on vitamin A, vitamin D and its relation with height among primary and middle school students in poor rural areas of Enshi from 2012 to 2021 / 中国学校卫生

Objective@#To investigate the status of physical development, vitamin A and vitamin D among primary and middle school students in poor rural areas in Hubei, to evaluate the implementation effectiveness of the Nutrition Improvement Program for Rural Compulsory Education Students (abbreviated to the program) from 2012 to 2021.@*Methods@#In Enshi City, a pilot monitoring county of the program in Hubei, and a total of 2 554 students from one primary school and one junior middle school were randomly selected. During September to October in 2012-2021, height was measured, and fasting venous blood was collected from students, and serum vitamin A and vitamin D were detected.@*Results@#From 2012 to 2021, height, serum vitamin A and serum vitamin D concentration increased by 2.7 cm, 96.7 μg/L and 8.6 ng/mL. Growth retardation rate decreased by 1.0%. The subclinical and clinical deficiency of serum vitamin A decreased by 37.3% and 6.2%. The subclinical and clinical deficiency of serum vitamin D decreased by 45.7% and 8.5%. Height was positively correlated with serum vitamin A status and negatively correlated with serum vitamin D status ( r =0.08,-0.08, P <0.01).@*Conclusion@#The pilot counties of the program in Enshi, has witnessed improvement in height, serum vitamin A and vitamin D status among primary and secondary students. However, future efforts remains essential as subclinical deficiency of vitamin A and vitamin D are noted in some students. Serum vitamin A is positively associated with height, and vitamin D is negatively associated with height.Considering the correlation between serum vitamin A and vitamin D status with height, continued efforts should be implemented in poor rural areasto strengthen targeted nutrition intervention for students in Hubei.

On the Role of Flexibility for Adsorptive Separation.

Chemical separations, mostly based on heat-driven techniques such as distillation, account for a large portion of the world's energy consumption. In principle, differential adsorption is a more energy-efficient separation method, but conventional adsorbent materials are still not effective for many industry-relevant mixtures. Porous coordination polymers (PCPs), or metal-organic frameworks (MOFs), are attractive for their well-defined, designable, modifiable, and flexible structures connecting to various potential applications. While the importance of the structural flexibility of MOFs in adsorption-based functions has been demonstrated, the understanding of this special feature is still in its infancy and mostly stays at the periodic structural transformation at the equilibrium state and the special shapes of single-component adsorption isotherms. There are many confusions about the categorization and roles of various types of flexibility. This Account discusses the role of flexibility of MOFs for adsorptive separation, mainly from the thermodynamic and kinetic points of view.As the classic type of framework flexibility, guest-driven structural transformations and the corresponding adsorption isotherms can be thermodynamically described by the energies of the host-guest system. The highly guest-specific pore-opening action showing contrasting single-component adsorption isotherms is regarded as a strategy for achieving molecular sieving without the need for aperture size control, but its effect and role for mixture separation are still controversial. Quantitative mixture adsorption/separation experiments showed that the common periodic (cooperative) pore-opening action leads to coadsorption of molecules smaller than the opened aperture, while the aperiodic (noncooperative) one can achieve inversed molecular sieving under a thermodynamic mechanism.The energy barrier and structure in the nonequilibrium state are also important for flexibility and adsorption/separation. With suitable energy barriers between metastable structures, new types of framework flexibility such as aperture gating can be realized. While kinetically controlled gating flexibility is usually ignored because of the difficulty of characterization or considered as disadvantageous for separation because of the variable aperture size, it plays a critical role in most kinetic separation systems, including adsorbents conventionally regarded as rigid. With the concept of gating flexibility, the meanings of aperture and guest sizes for judging molecular sieving need to be reconsidered. Gating flexibility depends on not only the host itself but also the guest, the host-guest interaction, and the external environment such as temperature, which can be rationally tuned to achieve special adsorption/separation behaviors such as inversed temperature dependence, molecular sieving, and even inversed thermodynamic selectivity. The comprehensive understanding of the thermodynamic and kinetic bases of flexibility will give a new horizon for next-generation separation materials beyond MOFs and adsorbents.

Coupling Ruthenium Bipyridyl and Cobalt Imidazolate Units in a Metal-Organic Framework for an Efficient Photosynthetic Overall Reaction in Diluted CO2.

Artificial photocatalytic CO2 reduction, using water as the reductant, is challenging mainly because it is difficult for multiple functional units to cooperate efficiently. Here, we show that the classic photosensitive and H2O-oxidizing ruthenium bipyridyl units and CO2-reducing cobalt imidazolate units can be incorporated into a metal-organic framework using a classic organic ligand, imidazo[4,5-f][1,10]phenanthroline. Under visible light without additional sacrificial agents and photosensitizers, the overall conversion of CO2 and H2O to CO and O2 was achieved by the multifunctional photocatalyst in the CH3CN/H2O mixed solvent with a high CO production rate of 11.2 µmol g-1 h-1 and CO selectivity of ca. 100%. Thanks to its ultramicroporous structure with moderately strong CO2 adsorption ability, the photocatalyst also exhibited high performances with CO/CH4 production rates of 5.15/0.62 and 4.26/0.20 µmol g-1 h-1 in the gas phase with pure and even diluted CO2, respectively. Photoluminescence emission spectroscopy and photoelectrochemical tests confirmed that the photosensitive and catalytic units cooperated well to give suitable photocatalytic redox potentials and fast electron-hole separation.

Flexible Cuprous Triazolate Frameworks as Highly Stable and Efficient Electrocatalysts for CO2 Reduction with Tunable C2 H4 /CH4 Selectivity.

Cu-based metal-organic frameworks have attracted much attention for electrocatalytic CO2 reduction, but they are generally instable and difficult to control the product selectivity. We report flexible Cu(I) triazolate frameworks as efficient, stable, and tunable electrocatalysts for CO2 reduction to C2 H4 /CH4 . By changing the size of ligand side groups, the C2 H4 /CH4 selectivity ratio can be gradually tuned and inversed from 11.8 : 1 to 1 : 2.6, giving C2 H4 , CH4 , and hydrocarbon selectivities up to 51 %, 56 %, and 77 %, respectively. After long-term electrocatalysis, they can retain the structures/morphologies without formation of Cu-based inorganic species. Computational simulations showed that the coordination geometry of Cu(I) changed from triangular to tetrahedral to bind the reaction intermediates, and two adjacent Cu(I) cooperated for C-C coupling to form C2 H4 . Importantly, the ligand side groups controlled the catalyst flexibility by the steric hindrance mechanism, and the C2 H4 pathway is more sensitive than the CH4 one.

A partially fluorinated ligand for two super-hydrophobic porous coordination polymers with classic structures and increased porosities.

3-Ethyl-5-trifluoromethyl-1,2,4-triazole is synthesized by a one-pot reaction. Using this asymmetric triazole ligand bearing one trifluoromethyl and one ethyl as side groups, we construct two new porous coordination polymers, MAF-9 and MAF-2F, being isostructural with the classic hydrophobic and flexible materials, FMOF-1 and MAF-2, based on symmetric triazole ligands bearing two trifluoromethyl groups or two ethyl groups, respectively. MAF-9 and MAF-2F can adsorb large amounts of organic solvents but completely exclude water, showing superhydrophobicity with water contact angles of 152o in between those of FMOF-1 and MAF-2. MAF-9 exhibits very large N2-induced breathing and colossal positive and negative thermal expansions like FMOF-1, but the lower molecular weight and smaller volume of MAF-9 give 16% and 4% higher gravimetric and volumetric N2 uptakes, respectively. In contrast, MAF-2F is quite rigid and does not show the inversed temperature-dependent N2 adsorption and large guest-induced expansion like MAF-2. Further, despite the higher molecular weight and larger volume, MAF-2F possesses 6% and 25% higher gravimetric and volumetric CO2 uptakes, respectively. These results can be explained by the different pore sizes and side group arrangements in the two classic framework prototypes, which demonstrate the delicate roles of ligand side groups in controlling porosity, surface characteristic and flexibility.

A Porous Coordination Polymer Showing Guest-Amplified Positive and Negative Thermal Expansion.

A solvothermal reaction of Zn(NO3)2 and 4-(1H-pyrazol-4-yl)benzoic acid (H2pba) with toluene (Tol) as the template yielded a porous coordination polymer, [Zn(pba)]·0.5Tol, possessing a three-dimensional (3D) fence-like coordination framework based on inclined two-dimensional (2D) fence-like coordination layers. By virtue of the classic deformation mode of the 2D/3D fence structures, the guest-free structure exhibits very large positive thermal expansion of 347 MK-1 and moderate negative thermal expansion of -63/-83 MK-1, which are remarkably enhanced to new records of 689 and -171/-249 MK-1, respectively, by inclusion of Tol.

Graphene-Like Hydrogen-Bonded Melamine-Cyanuric Acid Supramolecular Nanosheets as Pseudo-Porous Catalyst Support.

Behaving as structural protectors and electronic modulators, catalyst supports such as graphene derivatives are generally constructed by covalent bonds. Here, hydrogen-bonded ultrathin nanosheets are reported as a new type of catalyst support. Melamine (M) and cyanuric acid (CA) molecules self-assemble to form the graphite-like hydrogen-bonded co-crystal M-CA, which can be easily exfoliated by ultrasonic treatment to yield ultrathin nanosheets with thickness of ≈1.6 nm and high stability at pH = 0. The dynamic nanosheets form adaptive defects/pores in the synthetic process of CoP nanoparticles, giving embedded composite with high hydrogen evolution activity (overpotential of 66 mV at 10 mA cm-2 ) and stability. Computational calculations, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy unveil the electron modulation effects of the nanosheets. This pseudo-porous catalyst support also can be applied to other metal phosphides.

Ultrathin 2D Copper(I) 1,2,4-Triazolate Coordination Polymer Nanosheets for Efficient and Selective Gene Silencing and Photodynamic Therapy.

Gene silencing holds promise for cancer therapeutics because of its potential to inhibit genes involved in tumor development. However, gene silencing is still restricted by its limited efficacy and safety. Nanoscale coordination polymers (CPs) emerge as promising nanocarriers for gene delivery, but their responsiveness and potential therapeutic properties have rarely been explored simultaneously. Here, multifunctional ultrathin 2D nanosheets of Cu(I) 1,2,4-triazolate CP with a thickness of 4.5 ± 0.8 nm are synthesized using a bottom-up method. These CP nanosheets can act as both an effective DNAzyme nanocarrier for gene therapy and an intrinsic photosensitizer for hypoxia-tolerant type I photodynamic therapy (PDT), which is ascribed to the Fenton-like reaction. Because of the glutathione (GSH)-responsiveness of the CP nanosheets, DNAzyme-loaded CP nanosheets exhibit excellent cancer-cell-targeting gene silencing of the early growth response factor-1 (EGR-1), with messenger RNA inhibited by 84% in MCF-7 (human breast cancer cells) and only 6% in MCF-10A (normal human mammary epithelial cells). After tail intravenous injection into MCF-7-tumor-bearing mice, the CP nanosheets loaded with chlorin-e6-modified DNAzyme under photoirradiation show a high antitumor efficacy (88.0% tumor regression), demonstrating a promising therapeutic platform with efficient and selective gene silencing and PDT of cancer.

A Hydrogen-Bonded yet Hydrophobic Porous Molecular Crystal for Molecular-Sieving-like Separation of Butane and Isobutane.

Porous molecular crystals sustained by hydrogen bonds and/or weaker connections are an intriguing type of adsorbents, but they rarely demonstrate efficient adsorptive separation because of poor structural robustness and tailorability. Herein, we report a porous molecular crystal based on hydrogen-bonded cyclic dinuclear AgI complex, which exhibits exceptional hydrophobicity with a water contact angle of 134°, and high chemical stability in water at pH 2-13. The seemingly rigid adsorbent shows a pore-opening or nonporous-to-porous type butane adsorption isotherm and complete exclusion of isobutane, indicating potential molecular sieving. Quantitative column breakthrough experiments show slight co-adsorption of isobutane with an experimental butane/isobutane selectivity of 23, and isobutane can be purified more efficiently than for butane. In situ powder/single-crystal X-ray diffraction and computational simulations reveal that a trivial guest-induced structural transformation plays a critical role.

Two Isostructural Flexible Porous Coordination Polymers Showing Contrasting Single-Component and Mixture Adsorption Properties for Propylene/Propane.

Solvothermal reactions of 3-(3-methylpyridin-4-yl)benzoic acid (Hmpba) with Mn(NO3)2 or Co(NO3)2 yielded isostructural porous coordination polymers, [Mn(mpba)2]·guest (MCF-56, 1·g) and [Co(mpba)2]·guest (MCF-57, 2·g), respectively. X-ray diffraction revealed that 1·g and 2·g possess similar one-dimensional ultramicroporous channels, and guest-free [Mn(mpba)2] (1') and [Co(mpba)2] (2') possess significantly and slightly contracted channels, respectively. Single-component C3H6/C3H8 adsorption isotherms and computational simulations showed the typical nonporous-to-porous structural transformations for 1', in which C3H6 exhibits a significantly lower threshold pressure, and the typical small-pore-to-large-pore structural transformations for 2', in which C3H6 exhibits a slightly lower threshold pressure. Mixture column breakthrough experiments showed that the C3H6/C3H8 separation performances of 2' are obviously better than those of 1', because the latter cannot adsorb C3H6 below the threshold pressure for pore opening, and the pore opened by C3H6 can adsorb C3H8.

On-surface isostructural transformation from a hydrogen-bonded network to a coordination network for tuning the pore size and guest recognition.

Rational manipulation of supramolecular structures on surfaces is of great importance and challenging. We show that imidazole-based hydrogen-bonded networks on a metal surface can transform into an isostructural coordination network for facile tuning of the pore size and guest recognition behaviours. Deposition of triangular-shaped benzotrisimidazole (H3btim) molecules on Au(111)/Ag(111) surfaces gives honeycomb networks linked by double N-H⋯N hydrogen bonds. While the H3btim hydrogen-bonded networks on Au(111) evaporate above 453 K, those on Ag(111) transform into isostructural [Ag3(btim)] coordination networks based on double N-Ag-N bonds at 423 K, by virtue of the unconventional metal-acid replacement reaction (Ag reduces H+). The transformation expands the pore diameter of the honeycomb networks from 3.8 Å to 6.9 Å, giving remarkably different host-guest recognition behaviours for fullerene and ferrocene molecules based on the size compatibility mechanism.

Intermediate-sized molecular sieving of styrene from larger and smaller analogues.

Molecular sieving can lead to ultrahigh selectivity and low regeneration energy because it completely excludes all larger molecules via a size restriction mechanism. However, it allows adsorption of all molecules smaller than the pore aperture and so separations of complicated mixtures can be hindered. Here, we report an intermediate-sized molecular sieving (iSMS) effect in a metal-organic framework (MAF-41) designed with restricted flexibility, which also exhibits superhydrophobicity and ultrahigh thermal/chemical stabilities. Single-component isotherms and computational simulations show adsorption of styrene but complete exclusion of the larger analogue ethylbenzene (because it exceeds the maximal aperture size) and smaller toluene/benzene molecules that have insufficient adsorption energy to open the cavity. Mixture adsorption experiments show a high styrene selectivity of 1,250 for an ethylbenzene/styrene mixture and 3,300 for an ethylbenzene/styrene/toluene/benzene mixture (orders of magnitude higher than previous reports). This produces styrene with a purity of 99.9%+ in a single adsorption-desorption cycle. Controlling/restricting flexibility is the key for iSMS and can be a promising strategy for discovering other exceptional properties.