Potential mechanism of biochar enhanced degradation of oxytetracycline by Pseudomonas aeruginosa OTC-T.

Extensive use of oxytetracycline (OTC) and the generation of its corresponding resistance genes have resulted in serious environmental problems. Physical-biological combined remediation is an attractive method for OTC degradation because of its high remediation efficiency, stability, and environmental friendliness. In this study, an effective OTC-degrading strain identified as Pseudomonas aeruginosa OTC-T, was isolated from chicken manure. In the degradation experiment, the degradation rates of OTC in the degradation systems with and without the biochar addition were 92.71-100 % and 69.11-99.59 %, respectively. Biochar improved the tolerance of the strain to extreme environments, and the OTC degradation rate increased by 20.25 %, 18.61 %, and 13.13 % under extreme pH, temperature, and substrate concentration conditions, respectively. Additionally, the degradation kinetics showed that biochar increased the reaction rate constant in the degradation system and shortened the degradation period. In the biological toxicity assessment, biochar increased the proportion of live cells by 17.63 % and decreased the proportion of apoptotic cells by 58.87 %. Metabolomics revealed that biochar had a significant effect on the metabolism of the strains and promoted cell growth and reproduction, effectively reducing oxidative stress induced by OTC. This study elucidates how biochar affects OTC biodegradation and provides insights into the future application of biochar-assisted microbial technology in environmental remediation.

The transformation of heavy metal speciation during rapid high-temperature aerobic fermentation of food waste and their potential mechanisms.

In this study, the content changes of multiple trace heavy metals (HMs) in food waste using a new rapid high-temperature aerobic fermentation (RTAF) technology and their relationships with different physicochemical factors were researched. The results indicated that the content of HMs in the decomposed products met the industry standards for organic fertilizers (NY/T525-2021, China). Physicochemical factors played an important role in controlling the changes in HM content. The component evolution of dissolved organic matter was studied, and its influences on the transformation of HM speciation showed that the RTAF process converted proteins into humus-like substances. Redundancy analysis revealed that the main factors driving the speciation transformation of HMs were tyrosine-like substances or microbial-derived humus (C3), molecular weight of dissolved organic matter (SUVA254) and humification degree (E250/E365). The increase in humification degree contributed to passivating HMs. The correlation network analysis results showed that the exchangeable HMs (Exc-HMs) were related to Lactobacillus and Pediococcu. Additionally, the cytoskeleton, coenzyme transport and metabolic function of microorganisms affected the Exc-HM content. These research results can provide a scientific basis for the prevention and control of HM pollution during the treatment of food waste.

Biochar-assisted degradation of oxytetracycline by Achromobacter denitrificans and underlying mechanisms.

Contamination of the environment with large amounts of residual oxytetracycline (OTC) and the corresponding resistance genes poses a potential threat to natural ecosystems and human health. In this study, an effective OTC-degrading strain, identified as Achromobacter denitrificans OTC-F, was isolated from activated sludge. In the degradation experiment, the degradation rates of OTC in the degradation systems with and without biochar addition were 95.01-100% and 73.72-99.66%, respectively. Biochar promotes the biodegradation of OTC, particularly under extreme environmental conditions. Toxicity evaluation experiments showed that biochar reduced biotoxicity and increased the proportion of living cells by 17.36%. Additionally, biochar increased the activity of antioxidant enzymes by 34.1-91.0%. Metabolomic analysis revealed that biochar promoted the secretion of antioxidant substances such as glutathione and tetrahydrofolate, which effectively reduced oxidative stress induced by OTC. This study revealed the mechanism at the molecular level and provided new strategies for the bioremediation of OTC in the environment.

Photochemical behaviors of dissolved organic matter in aquatic environment: Generation, characterization, influencing factors and practical application.

Dissolved organic matter (DOM) widely exists in aquatic environment and plays a critical role in environmental photochemical reaction. The photochemical behaviors of DOM in sunlit surface waters have received widely attention because its photochemical effects for some coexisted substances in aquatic environment, especially for organic micropollutants degradation. Therefore, to gain a comprehensive understanding of the photochemical properties and environmental effects of DOM, we reviewed the influence of sources on the structure and composition of DOM with relevant identified techniques to analysis functional groups. Additionally, identification and quantification for reactive intermediates are discussed with a focus on influencing factors to produce reactive intermediates by DOM under solar irradiation. These reactive intermediates can promote the photodegradation of organic micropollutants in the environmental system. In future, attention should be paid to the photochemical properties of DOM and environmental effects in real environmental system and development of advanced techniques to study DOM.

Biochar-supported magnesium oxide as high-efficient lead adsorbent with economical use of magnesium precursor.

With unique porous structure inherited from lignocellulose, biochar was an appropriate carrier for small-size MgO materials, which could simplify the synthetic process and better solve agglomeration and separation problems during adsorption. Biochar-supported MgO was prepared with impregnation method. Under different synthesis conditions, the obtained MgO presented diverse properties, and moderate pyrolysis condition was conducive to the improvement of Mg conversion rate. The Pb(II) capacity was highly correlated with Mg content, rather than the specific surface area. Reducing the pyrolysis temperature or increasing the usage of supporter could improve adsorption efficiency when using Mg content-normalized capacity as the criterion. The better release ability of Mg, contribute by the higher extent of hydration and better spread of MgO, were the critical factors. The maximal Mg content-normalized capacity could reach 0.932 mmol·mmol-Mg-1 with the mass ratio of biochar/MgCl2·6H2O = 4:1 at the pyrolysis temperature of 600 °C. Considering the ultimate utilization efficiency of Mg in precursor, the optimum Mg consumption-normalized capacity was 0.744 mmol·mmol-Mg-1 with the mass ratio of biochar/MgCl2·6H2O = 1:1 at 600 °C.

Impact of emerging pollutant florfenicol on enhanced biological phosphorus removal process: Focus on reactor performance and related mechanisms.

Florfenicol (FF), an emerging pollutant antibiotic that is difficult to biodegrade, inevitably enters sewage treatment facilities with high level. To date, however, the performance and related mechanism of FF on enhanced biological phosphorus removal (EBPR) have not been reported. In order to fill this gap, this work investigated the potential impacts of FF on EBPR and revealed the relevant mechanisms. The effect of FF on EBPR was dose-dependent, that was, low dose had no effect on EBPR, while high FF concentration inhibited EBPR. Mechanism investigation showed that FF had no effect on anaerobic phosphate release, but reduced oxic phosphorus uptake. Three-dimensional Excitation-emission Matrix fluorescence spectroscopy and X-ray photoelectron spectroscopy analysis showed that FF affected the structure and components of activated sludge extracellular polymers (EPS). High content of FF stimulated sludge to secrete more EPS. High level of FF reduced the relative abundance of microorganisms responsible for biological phosphorus removal. Microbiological community structure analysis indicated 2.0 mg FF/L increased the relative abundance of Candidatus_Competibacter and Terrimonas from 9.22 % and 12.49 % to 19.00 % and 16.28 %, respectively, but significantly reduced the relative abundance of Chinophagaceae from 11.32 % to 0.38 %, compared with the blank.

Preparation of a new biochar-based microbial fertilizer: Nutrient release patterns and synergistic mechanisms to improve soil fertility.

The contradiction between population growth and soil degradation has been increasingly prominent, such that novel fertilizers (e.g., biochar and microbial fertilizers) should be urgently developed. Biochar is a promising fertilizer carrier for microbial fertilizers due to its porous structure. However, the preparation and mechanisms of the effects of biochar-based microbial fertilizers have been rarely investigated. In this study, biochar, Bacillus, and exogenous N-P-K fertilizers served as the raw materials to prepare biochar-based microbial fertilizers (BCMFs) by optimizing the preparation methods and the process parameters. Moreover, the release patterns of N-P-K were analyzed. A pot experiment was performed on pakchoi to examine the effect of the BCMFs and explore its synergistic effect on soil fertility. The results of this study indicated that adsorption by biochar maintained bacterial activity, whereas the granulation process reduced bacterial activity. The adsorption-granulation process increased the content of total nitrogen and organic matter in the soil while enhancing the slow-release effect of the BCMFs. The Elovich model was capable of describing the nitrogen release of the BCMFs, including the diffusion and chemical processes. As indicated by the result of the column leaching experiment, the BCMFs stopped nutrient leaching more significantly than the conventional fertilizers (CF), especially in stopping N and P leaching. The use of the BCMFs improved the available soil nutrients and soil quality while enhancing the abundance of bacteria correlated with carbon and nitrogen metabolism in the soil. Moreover, a 20 % reduction in the use of the BCMFs did not significantly affect the soil available N and P and the growth status of pakchoi. The result of redundancy analysis indicated that the cation exchange capacity (CEC), NH4+-N, NO3--N, ß-glucosidase (BG), urease (URE), and alkaline phosphatase (AlkP) were the six critical environmental factors for the microbial community structure and could explain 94.8 % of the variance. The BCMFs up-regulated the levels of the above six factors, especially CEC and BG, thus improving the soil quality and enhancing the soil fertility.

Calcium hypochlorite-coupled aged refuse promotes hydrogen production from sludge anaerobic fermentation.

This work investigated the effect of calcium hypochlorite (CH) coupled aged refuse (AR) treatment on the enhanced hydrogen generation from sludge anaerobic dark fermentation (SADF). The enhanced mechanism was systematically revealed through sludge disintegration, organic matter biotransformation, and microbial community characteristics, etc. The experimental data showed that CH coupled AR increased the hydrogen yield to 18.1 mL/g, significantly higher than that in the AR or CH group alone. Mechanistic analysis showed that CH-coupled AR significantly promoted sludge disintegration and hydrolysis processes, providing sufficient material for hydrogen-producing bacteria. Microbiological analysis showed that CH-coupled AR increased the relative abundance of responsible hydrogen-producing microorganisms. In addition, CH-coupled AR was very effective in reducing phosphate content in the fermentation liquid and fecal coliforms in the digestate, thus facilitating the subsequent treatment of fermentation broth and digestate. CH coupled AR is an alternative strategy to increase hydrogen production from sludge.

Insights into ferulic acid detoxification mechanism by using a novel adsorbent, AEPA250: The microinteraction of ferulic acid with AEPA250 and Saccharomyces cerevisiae.

In this study, a novel adsorbent, Air Environment-prepared Adsorbent at 250 â„ƒ (AEPA250), was used to detoxify the main fermentation inhibitor (ferulic acid) present in the alkali-pretreated hydrolysate. AEPA250 reduced the effective concentration of ferulic acid by its adsorption, thereby decreasing the possible interaction of ferulic acid with Saccharomyces cerevisiae. The results indicated that AEPA250 functionalized with hydroxyl, carboxyl, and amino groups under acidic conditions with higher binding energies (-45.667, -27.046, and -11.008 kcal mol-1, respectively) and electronic cloud overlap and shorter bond distances (1.015, 1.010, and 2.094 Å, respectively) than those under the other pH conditions. These differences revealed that the electrostatic interaction dominated ferulic acid adsorption on AEPA250. Additionally, under acidic conditions and for carboxyl group functionalized AEPA250, energy band gap values of Eg1 were higher than those of Eg2, indicating that ferulic acid provided the π-electrons for the π-π electron donor-acceptor interactions with AEPA250. Furthermore, ferulic acid detoxification after AEPA250 adsorption caused the regulation of YDR316W-B and YPR137C-B genes of S. cerevisiae. These results might contribute to the development of other more efficient adsorbents and pretreatment methods and allow yeast engineering for improving the scale-up and self-sufficient production of bioethanol in the future.

Effects of pyrolysis temperature on soil-plant-microbe responses to Solidago canadensis L.-derived biochar in coastal saline-alkali soil.

Because salinity of coastal soils is drastically increasing, the application of biochars to saline-alkali soil amendments has attracted considerable attention. Various Solidago-canadensis-L.-derived biochars prepared through pyrolysis from 400 to 600 °C were applied to coastal saline-alkali soil samples to optimise the biochar pyrolysis temperature and investigate its actual ecological responses. All biochars reduced the soil bulk density and exchangeable sodium stress and increased soil water-holding capacity, cation exchange capacity, and organic matter content. Principal-component-analysis results showed that pyrolysis temperature played an important role in the potential application of biochars to improve the coastal saline-alkali soil, mainly contributed to ameliorating exchangeable sodium stress and decreasing biochar-soluble toxic compounds. Furthermore, soil bulk density and organic matter, as well as carboxylic acids, phenolic acids and amines of biochar were major driving factors for bacterial community composition. Compared to low-temperature biochar (pyrolyzed below 550 °C), which showed higher toxicity for Brassica chinensis L. growth due to the higher content of carboxylic acids, phenols and amines, high-temperature biochar (pyrolyzed at or above 550 °C) possessed less amounts of these toxic functional groups, more beneficial soil bacteria and healthier for plant growth. Therefore, high-temperature biochar could be applied as an effective soil amendment to ameliorate the coastal saline-alkali soil with acceptable environmental risk.

Adsorption of ferulic acid from an alkali-pretreated hydrolysate using a new effective adsorbent prepared by a thermal processing method.

A new adsorbent (AEPA250) was prepared using the enzymatic hydrolyzed residue of rice straw in an air environment at 250 ℃ by a thermal processing method. Compared to the commercial adsorbent, AEPA250 possessed a larger specific surface area of 277.680 m2 g-1, and the maximum adsorption efficiency of ferulic acid from alkali-pretreated hydrolysate of rice straw achieved 70.33 % at the optimum conditions. Adsorption kinetics and isotherm studies showed that the pseudo second-order (PSO) (0.997 ≤ R2 ≤ 0.999) and Liu models (0.931 ≤ R2 ≤ 0.997) exhibited better fitting results, which indicated that chemical and saturable adsorption existed between ferulic acid and AEPA250. An adsorption thermodynamics study revealed the spontaneous and endothermic adsorption process (ΔHo > 0 and ΔSo< 0). Micropore diffusion was defined as the major adsorption rate-limiting step according to the analysis of Webber-Morris and Bangham's model. Additionally, π-π*, ion exchange, hydrogen bonding and precipitation were recognized as the four main mechanisms of ferulic acid removal by AEPA250 through SEM/EDX, EDX mapping, XPS, FTIR and XRD analysis. These results indicated that AEPA250 was effective for adsorbing inhibitors in pretreated rice straw hydrolysates, and it has high potential for application in establishing the self-sufficient production process of bioethanol.

Remediation of cadmium-contaminated soil with biochar simultaneously improves biochar's recalcitrance.

Biochar sequesters cadmium (Cd) by immobilisation, but the process is often less effective in field trials than in the laboratory. Therefore, the involvement of soil components should be considered for predicting field conditions that could potentially improve this process. Here, we used biochar derived from Spartina alterniflora as the amendment for Cd-contaminated soil. In simulation trials, a mixture of kaolin, a representative soil model component, and S. alterniflora-derived biochar immobilised Cd by forming silicon-aluminium-Cd-containing complexes. Interestingly, the biochar recalcitrance index value increased from 48% to 53%-56% because of the formation of physical barriers consisting of kaolinite minerals and Cd complexes. Pot trials were performed using Brassica chinensis for evaluating the effect of S. alterniflora-derived biochar on plant growth in Cd-contaminated soil. The bio-concentration factor values in B. chinensis were 24%-31% after soil remediation with biochar than in control plants. In summary, these results indicated that soil minerals facilitated Cd sequestration by biochar, which reduced Cd bioavailability and improved the recalcitrance of this soil amendment. Thus, mechanisms for effective Cd remediation should include biochar-soil interactions.

Quantitative Structure-Toxicity Relationship analysis of combined toxic effects of lignocellulose-derived inhibitors on bioethanol production.

This study performed a Quantitative Structure-Toxicity Relationship (QSTR) model to evaluate the combined toxicity of lignocellulose-derived inhibitors on bioethanol production. Compared with all the control groups, the combined systems exhibited lower conductivity values, higher oxidation-reduction potential values, as well as maximum inhibition rates. These results indicated that the presence of combined inhibitors had a negative effect on the bioethanol fermentation process. Meanwhile, QSTR model was excellent for evaluating the combined toxic effects at lower ferulic acid concentration (([1:4] × IC50)) and (([1:1] × IC50)), due to higher R2 values (0.994 and 0.762), lower P values (0.000 and 0.023) and relative error values (less than 30%). The obtained results also showed that the combined toxic effects of ferulic acid and representative lignocellulose-derived inhibitors were relevant to different molecular descriptors. Meanwhile, the interactions of combined inhibitors were weaker when ferulic acid was at low concentration ([1:4] × IC50).

A study of cadmium remediation and mechanisms: Improvements in the stability of walnut shell-derived biochar.

Biochar has been recognized as an efficient soil amendment for cadmium remediation in recent years. In the present study, biochar was prepared using walnut shell, and it was incubated in Cd(NO3)2 and kaolin for 15 days. Different chemical forms of cadmium in kaolin and biochar were determined, and the stability of biochar was evaluated by R50 using TGA analysis. It was found that walnut shell derived biochar could reduce the mobility of cadmium. After incubation, the R50, biochar value increased from 61.31% to 69.57%-72.24%, indicating that the stability of biochar was improved. The mechanisms that initiated improvements in biochar stability were investigated by XPS, XRD and SEM-EDS analysis. The result showed that the enhanced biochar stability is likely due to physical isolation and the formation of precipitates and complexes, formed on the surface or interior of the biochar. The results suggested that walnut shell-derived biochar can be used as a cadmium sorbent for soil remediation.

Toxicity evaluation of lignocellulose-derived phenolic inhibitors on Saccharomyces cerevisiae growth by using the QSTR method.

Quantitative Structure-toxicity Relationship (QSTR) models were built to evaluate the toxicity of lignocellulose-derived phenolic inhibitors on the growth of Saccharomyces cerevisiae in a bioethanol production process. The established models were proved to be reliable after rigorous validation and showed values of R2 > 0.6 and Q2LOO > 0.5. They could provide accurate guidance for alleviating the most toxic inhibitors in pretreated lignocellulosic hydrolysates, thus facilitating bioethanol production. The results showed that the inhibitors that possessed unsaturated bonds, formyl groups and carbonyl group substituents showed obvious toxicity effects. The toxicity of the inhibitors with ortho-electron-withdrawing substituents was stronger than that of metra- or para-electron-donating substituents. Ferulic acid was chosen to analyze its toxicity in practical alkali-pretreated rice straw hydrolysates because of its strong toxicity and high concentration. The results showed that its toxicity was up to 82%, which was suggested to be dominantly detoxified in the bioethanol production process.

Enhancing bioethanol production from water hyacinth by new combined pretreatment methods.

This study investigated the possibility of enhancing bioethanol production by combined pretreatment methods for water hyacinth. Three different kinds of pretreatment methods, including microbial pretreatment, microbial combined dilute acid pretreatment, and microbial combined dilute alkaline pretreatment, were investigated for water hyacinth degradation. The results showed that microbial combined dilute acid pretreatment is the most effective method, resulting in the highest cellulose content (39.4 ±â€¯2.8%) and reducing sugars production (430.66 mg·g-1). Scanning Electron Microscopy and Fourier Transform Infrared Spectrometer analysis indicated that the basic tissue of water hyacinth was significantly destroyed. Compared to the other previously reported pretreatment methods for water hyacinth, which did not append additional cellulase and microbes for hydrolysis process, the microbial combined dilute acid pretreatment of our research could achieve the highest reducing sugars. Moreover, the production of bioethanol could achieve 1.40 g·L-1 after fermentation, which could provide an extremely promising way for utilization of water hyacinth.

Levels, sources and probabilistic health risks of polycyclic aromatic hydrocarbons in the agricultural soils from sites neighboring suburban industries in Shanghai.

The levels, sources and quantitative probabilistic health risks for polycyclic aromatic hydrocarbons (PAHs) in agricultural soils in the vicinity of power, steel and petrochemical plants in the suburbs of Shanghai are discussed. The total concentration of 16 PAHs in the soils ranges from 223 to 8214ng g-1. The sources of PAHs were analyzed by both isomeric ratios and a principal component analysis-multiple linear regression method. The results indicate that PAHs mainly originated from the incomplete combustion of coal and oil. The probabilistic risk assessments for both carcinogenic and non-carcinogenic risks posed by PAHs in soils with adult farmers as concerned receptors were quantitatively calculated by Monte Carlo simulation. The estimated total carcinogenic risks (TCR) for the agricultural soils has a 45% possibility of exceeding the acceptable threshold value (10-6), indicating potential adverse health effects. However, all non-carcinogenic risks are below the threshold value. Oral intake is the dominant exposure pathway, accounting for 77.7% of TCR, while inhalation intake is negligible. The three PAHs with the highest contribution for TCR are BaP (64.35%), DBA (17.56%) and InP (9.06%). Sensitivity analyses indicate that exposure frequency has the greatest impact on the total risk uncertainty, followed by the exposure dose through oral intake and exposure duration. These results indicate that it is essential to manage the health risks of PAH-contaminated agricultural soils in the vicinity of typical industries in megacities.

Magnetically separable maghemite/montmorillonite composite as an efficient heterogeneous Fenton-like catalyst for phenol degradation.

To develop highly efficient and conveniently separable iron containing catalysts is crucial to remove recalcitrant organic pollutants in wastewater through a heterogeneous Fenton-like reaction. A maghemite/montmorillonite composite was synthesized by a coprecipitation and calcination method. The physiochemical properties of catalysts were characterized by XRD, TEM, nitrogen physisorption, thermogravimetric analysis/differential scanning calorimetry (TG/DSC), zeta potential, and magnetite susceptibility measurements. The influence of calcination temperatures and reaction parameters was investigated. The calcined composites retain magnetism because the presence of montmorillonite inhibited the growth of γ-Fe2O3 nanoparticles, as well as their phase transition. The catalytic activities for phenol degradation were significantly enhanced by calcinations, which strengthen the interaction between iron oxides and aluminosilicate framework and result in more negatively charged surface. The composite (73 m2/g) calcined at 350 °C had the highest catalytic activities, with more than 99 % phenol reduction after only 35 min reaction at pH 3.6. Simultaneously, this catalyst exhibited high stability, low iron leaching, and magnetically separable ability for consecutive usage, making it promising for the removal of recalcitrant organic pollutants in wastewater.

Stimulatory effect and adsorption behavior of rhamnolipids on lignocelluloses degradation system.

Di-rhamnolipid and mixed rhamnolipid were added to rice straw degrading system to investigate their mechanism of stimulatory effect. By batch adsorption experiments, it was shown that the equilibrium adsorption time of rhamnolipids on rice straw single system was the shortest (50min). The adsorption capacity of Trichoderma reesei single system was the strongest, whose Qe,exp for di-rhamnolipid and mixed rhamnolipid was 10.57×10-2mg·g-1 and 8.13×10-2mg·g-1, respectively. The adsorption of rhamnolipids on consortia system was not the simple adduct of the two single systems. The adsorption of rhamnolipids on the three different systems might belong to chemisorptions. SEM and FTIR analyses were used to observe the morphology and to analyze the chemical functions in lignocellulosic biomass degradation with rhamnolipid. It was shown that after addition of rhamnolipids, the basic tissue in rice straw was severely destroyed and hydrogen bond was formed between biosurfactant and bacteria in lignocellulose degrading system.

The large-scale process of microbial carbonate precipitation for nickel remediation from an industrial soil.

Microbial carbonate precipitation is known as an efficient process for the remediation of heavy metals from contaminated soils. In the present study, a urease positive bacterial isolate, identified as Bacillus cereus NS4 through 16S rDNA sequencing, was utilized on a large scale to remove nickel from industrial soil contaminated by the battery industry. The soil was highly contaminated with an initial total nickel concentration of approximately 900 mg kg-1. The soluble-exchangeable fraction was reduced to 38 mg kg-1 after treatment. The primary objective of metal stabilization was achieved by reducing the bioavailability through immobilizing the nickel in the urease-driven carbonate precipitation. The nickel removal in the soils contributed to the transformation of nickel from mobile species into stable biominerals identified as calcite, vaterite, aragonite and nickelous carbonate when analyzed under XRD. It was proven that during precipitation of calcite, Ni2+ with an ion radius close to Ca2+ was incorporated into the CaCO3 crystal. The biominerals were also characterized by using SEM-EDS to observe the crystal shape and Raman-FTIR spectroscopy to predict responsible bonding during bioremediation with respect to Ni immobilization. The electronic structure and chemical-state information of the detected elements during MICP bioremediation process was studied by XPS. This is the first study in which microbial carbonate precipitation was used for the large-scale remediation of metal-contaminated industrial soil.