Cross talk between Cu excess and Fe deficiency in the roots of rice.

Copper (Cu) and iron (Fe) share similar characteristics and participate as coenzymes in several physiological processes. Both Cu excess and Fe deficiency result in chlorosis, however, the crosstalk between the two is not clear in rice. In this study, we performed transcriptome analysis for Cu excess and Fe deficiency in rice. Some WRKY family members (such as WRKY26) and some bHLH family members (such as late flowering) were selected as novel potential transcription factors involved in the regulation of Cu detoxification and Fe utilization, respectively. These genes were induced under corresponding stress conditions. Many Fe uptake-related genes were induced by Cu excess, while Cu detoxification-related genes were not induced by Fe deficiency. Meanwhile, some genes, such as metallothionein 3a, gibberellin 3beta-dioxygenase 2 and WRKY11, were induced by Cu excess but repressed by Fe deficiency. Concisely, our results highlight the crosstalk between Cu excess and Fe deficiency in rice. Cu excess caused Fe deficiency response, while Fe deficiency did not lead to Cu toxicity response. Metallothionein 3a might be responsible for Cu toxicity-induced chlorosis in rice. The crosstalk between Cu excess and Fe deficiency might be regulated by gibberellic acid.

Design of the Synergistic Rectifying Interfaces in Mott-Schottky Catalysts.

The functions of interfacial synergy in heterojunction catalysts are diverse and powerful, providing a route to solve many difficulties in energy conversion and organic synthesis. Among heterojunction-based catalysts, the Mott-Schottky catalysts composed of a metal-semiconductor heterojunction with predictable and designable interfacial synergy are rising stars of next-generation catalysts. We review the concept of Mott-Schottky catalysts and discuss their applications in various realms of catalysis. In particular, the design of a Mott-Schottky catalyst provides a feasible strategy to boost energy conversion and chemical synthesis processes, even allowing realization of novel catalytic functions such as enhanced redox activity, Lewis acid-base pairs, and electron donor-acceptor couples for dealing with the current problems in catalysis for energy conversion and storage. This review focuses on the synthesis, assembly, and characterization of Schottky heterojunctions for photocatalysis, electrocatalysis, and organic synthesis. The proposed design principles, including the importance of constructing stable and clean interfaces, tuning work function differences, and preparing exposable interfacial structures for designing electronic interfaces, will provide a reference for the development of all heterojunction-type catalysts, electrodes, energy conversion/storage devices, and even super absorbers, which are currently topics of interest in fields such as electrocatalysis, fuel cells, CO2 reduction, and wastewater treatment.

[Association of the ADCY9 gene and gene-environmental interaction with the susceptibility to childhood bronchial asthma]. / ADCY9åŸºå› ä¸Žå„¿ç«¥æ”¯æ°”ç®¡å“®å–˜çš„æ˜“æ„Ÿæ€§åŠçŽ¯å¢ƒäº¤äº’ä½œç”¨åˆ†æž.

OBJECTIVES: To study the association of the single nucleotide polymorphisms (SNPs) of the adenylyl cyclase IX (ADCY9) gene at rs1967309, rs2230739, rs2601814, rs2601825, rs2601796, and rs2283497 loci and gene-environment interaction with childhood bronchial asthma (asthma for short). METHODS: A total of 123 children with asthma who attended the hospital from March 2019 to September 2021 were enrolled as the asthma group, among whom 84 (68.3%) had mild-to-moderate attacks and 39 (31.7%) had severe attacks. A total of 124 healthy children were enrolled as the control group. The association of the SNPs and haplotypes of the ADCY9 gene at the above 6 loci with the susceptibility to childhood asthma was evaluated. The method of generalized multifactor dimensionality reduction was used to analyze gene-environment interaction. RESULTS: Polymorphisms were observed for the ADCY9 gene at the above six loci in both the asthma and control groups, and there were significant differences in genotype and allele frequencies at the rs1967309 locus between the two groups (P<0.05). There was no significant difference in the distribution frequency of haplotypes TA and GG between the asthma and control groups (P>0.05). The generalized multifactor dimensionality reduction analysis showed interaction between rs1967309 locus and allergen contact (P<0.05), which increased the risk of asthma (OR=1.585, P<0.05). CONCLUSIONS: The rs1967309 locus of the ADCY9 gene is associated with the susceptibility to childhood asthma, and the locus and allergen contact have a synergistic effect on the development of asthma.

Direct Oxygen Transfer from H2 O to Cyclooctene over Electron-Rich RuO2 Nanocrystals for Epoxidation and Hydrogen Evolution.

Production of more than 20 million tons of epoxides per year from olefins suffers from low atom economy due to the use of oxidants and complex catalysts with unsatisfactory selectivity, leading to huge environmental and economic costs. We present a proof-of-concept application of electron-rich RuO2 nanocrystals to boost the highly selective epoxidation of cyclooctene via direct oxygen transfer from water as the sole oxygen source under mild conditions. The enhanced electron enrichment of RuO2 nanocrystals via the Schottky effect with nitrogen-doped carbons largely promotes the capture and activation of cyclooctene to give a high turnover frequency (260 h-1 ) of cyclooctene oxide, far surpassing the reported values (<20 h-1 ) of benchmarked catalysts at room temperature with oxidants. Our electron-rich RuO2 electrocatalysts enable efficient and durable hydrogen production (Faradaic efficiency >90 %) on the cathode without impacting on the selectivity to epoxide (>99 %) on the anode.

Facilitating Hot Electron Injection from Graphene to Semiconductor by Rectifying Contact for Vis-NIR-Driven H2 O2 Production.

Solar-driven production of hydrogen peroxide (H2 O2 ), as an important industrial chemical oxidant with an extensive range of applications, from oxygen reduction is a sustainable alternative to mainstream anthraquinone oxidation and direct hydrogenation of dioxygen methods. The efficiency of solar to hydrogen peroxide over semiconductor-based photocatalysts is still largely limited by the narrow light absorption to visible light. Here, the authors proposed and demonstrate the proof-of-concept application of light-generated hot electrons in a graphene/semiconductor (exemplified with widely used TiO2 ) dyad to largely extend visible light spectra up to 800 nm for efficient H2 O2 production. The well-designed graphene/semiconductor heterojunction has a rectifying interface with a zero barrier for the hot electron injection, largely boosting excited hot electrons with an average lifetime of ≈0.5 ps into charge carriers with a long fluorescent lifetime (4.0 ns) for subsequent H2 O2 production. The optimized dyadic photocatalyst can provide an H2 O2 yield of 0.67 mm g-1  h-1 under visible light irradiation (λ ≥ 400 nm), which is 20 times of the state-of-the-art noble-metal-free titanium oxide-based photocatalyst, and even achieves an H2 O2 yield of 0.14 mm g-1  h-1 upon photoexcitation by near-infrared-region light (≈800 nm).

Boosting Mass Exchange between Pd/NC and MoC/NC Dual Junctions via Electron Exchange for Cascade CO2 Fixation.

Merging existing catalysts together as a cascade catalyst may achieve "one-pot" synthesis of complex but functional molecules by simplifying multistep reactions, which is the blueprint of sustainable chemistry with low pollutant emission and consumption of energy and materials only when the smooth mass exchange between different catalysts is ensured. Effective strategies to facilitate the mass exchange between different active centers, which may dominate the final activity of various cascade catalysts, have not been reached until now, even though charged interfaces due to work function driven electron exchange have been widely observed. Here, we successfully constructed mass (reactants and intermediates) exchange paths between Pd/N-doped carbon and MoC/N-doped carbon induced by interfacial electron exchange to trigger the mild and cascade methylation of amines using CO2 and H2. Theoretical and experimental results have demonstrated that the mass exchange between electron-rich MoC and electron-deficient Pd could prominently improve the production of N,N-dimethyl tertiary amine, which results in a remarkably high turnover frequency value under mild conditions, outperforming the state-of-the-art catalysts in the literature by a factor of 5.9.

Tunable Surface Electric Field of Electrocatalysts via Constructing Schottky Heterojunctions for Selective Conversion of Trash Ions to Treasures.

Surface electric field of catalyst is widely recognized as one of the key points to boost catalytic activity. However, there is still a lack of convenient ways to tune the surface electric field to selectively boost the catalytic conversions of different types of reactants in specific catalytic reactions. Here, we introduce a conceptually new method to tune the surface electric field of electrode materials by adjusting the number and density of heterojunctions inside. Both theoretical and experimental results prove that the well-designed surface electric field of an electrocatalyst plays a key role in facilitating pre-adsorption and/or activation of reactants for selective conversion of trash ions to useful products in hydrogen and oxygen evolution reactions as well as NOx - reduction reactions.

Heterojunction-Based Electron Donators to Stabilize and Activate Ultrafine Pt Nanoparticles for Efficient Hydrogen Atom Dissociation and Gas Evolution.

Platinum (Pt) is the most effective bench-marked catalyst for producing renewable and clean hydrogen energy by electrochemical water splitting. There is demand for high HER catalytic activity to achieve efficient utilization and minimize the loading of Pt in catalysts. In this work, we significantly boost the HER mass activity of Pt nanoparticles in Ptx /Co to 8.3 times higher than that of commercial Pt/C by using Co/NC heterojunctions as a heterogeneous version of electron donors. The highly coupled interfaces between Co/NC and Pt metal enrich the electron density of Pt nanoparticles to facilitate the adsorption of H+ , the dissociation of Pt-H bonds and H2 release, giving the lowest HER overpotential of 6.9 mV vs. RHE at 10 mA cm-2 in acid among reported HER electrocatalysts. Given the easy scale-up synthesis due to the stabilization of ultrafine Pt nanoparticles by Co/NC solid ligands, Ptx /Co can even be a promising substitute for commercial Pt/C for practical applications.

Schottky Barrier-Induced Surface Electric Field Boosts Universal Reduction of NOx - in Water to Ammonia.

NOx - reduction acts a pivotal part in sustaining globally balanced nitrogen cycle and restoring ecological environment, ammonia (NH3 ) is an excellent energy carrier and the most valuable product among all the products of NOx - reduction reaction, the selectivity of which is far from satisfaction due to the intrinsic complexity of multiple-electron NOx - -to-NH3 process. Here, we utilize the Schottky barrier-induced surface electric field, by the construction of high density of electron-deficient Ni nanoparticles inside nitrogen-rich carbons, to facilitate the enrichment and fixation of all NOx - anions on the electrode surface, including NO3 - and NO2 - , and thus ensure the final selectivity to NH3 . Both theoretical and experimental results demonstrate that NOx - anions were continuously captured by the electrode with largely enhanced surface electric field, providing excellent Faradaic efficiency of 99 % from both electrocatalytic NO3 - and NO2 - reduction. Remarkably, the NH3 yield rate could reach the maximum of 25.1 mg h-1 cm-2 in electrocatalytic NO2 - reduction reaction, outperforming the maximum in the literature by a factor of 6.3 in neutral solution. With the universality of our electrocatalyst, all sorts of available electrolytes containing NOx - pollutants, including seawater or wastewater, could be directly used for ammonia production in potential through sustainable electrochemical technology.

Electrochemical activation of C-H by electron-deficient W2C nanocrystals for simultaneous alkoxylation and hydrogen evolution.

The activation of C-H bonds is a central challenge in organic chemistry and usually a key step for the retro-synthesis of functional natural products due to the high chemical stability of C-H bonds. Electrochemical methods are a powerful alternative for C-H activation, but this approach usually requires high overpotential and homogeneous mediators. Here, we design electron-deficient W2C nanocrystal-based electrodes to boost the heterogeneous activation of C-H bonds under mild conditions via an additive-free, purely heterogeneous electrocatalytic strategy. The electron density of W2C nanocrystals is tuned by constructing Schottky heterojunctions with nitrogen-doped carbon support to facilitate the preadsorption and activation of benzylic C-H bonds of ethylbenzene on the W2C surface, enabling a high turnover frequency (18.8 h-1) at a comparably low work potential (2 V versus SCE). The pronounced electron deficiency of the W2C nanocatalysts substantially facilitates the direct deprotonation process to ensure electrode durability without self-oxidation. The efficient oxidation process also boosts the balancing hydrogen production from as-formed protons on the cathode by a factor of 10 compared to an inert reference electrode. The whole process meets the requirements of atomic economy and electric energy utilization in terms of sustainable chemical synthesis.

Oxygen Vacancy Engineering of Titania-Induced by Sr2+ Dopants for Visible-Light-Driven Hydrogen Evolution.

A Sr2+-doping strategy is developed to engineer rich oxygen vacancies in porous titania for boosting visible-light-driven photocatalytic activity. The incorporation of strontium, with a larger atom radius than titanium, leads to the release of a lattice oxygen atom in the titania, causing the generation of an oxygen vacancy. The optimal Sr2+-doped titania sample with rich oxygen vacancies achieves a photocatalytic hydrogen production rate as high as 1092 µmol h-1 g-1, which is 4 and 16 times higher than the unmodified titania with less oxygen vacancies and the bench-marked P25, respectively.

Designed electron-deficient gold nanoparticles for a room-temperature Csp3-Csp3 coupling reaction.

Stille cross-coupling reactions catalysed by an ideal catalyst combining the high activity of homogeneous catalysts and the reusability of heterogeneous catalysts are of great interest for C-C bond formation, which is a widely used reaction in fine chemistry. Despite great effort to increase the utilization ratio of surface metal atoms, the activity of heterogeneous catalysts under mild conditions remains unsatisfactory. Herein, we design a proof-of-concept strategy to trigger the room-temperature activity of heterogeneous Au catalysts by decreasing the electron density at the interface of a rationally designed Schottky heterojunction of Au metals and boron-doped carbons. The electron-deficient Au nanoparticles formed as a result of the rectifying contact with boron-doped carbons facilitate the autocleavage of C-Br bonds for highly efficient C-C coupling reactions of alkylbromides and allylstannanes with a TOF value of 5199 h-1 at room temperature, surpassing that of the state-of-the-art homogeneous catalyst.

Mild and selective hydrogenation of CO2 into formic acid over electron-rich MoC nanocatalysts.

The direct hydrogenation of CO2 using H2 gas is a one-stone-two-birds route to produce highly value-added hydrocarbon compounds and to lower the CO2 level in the atmosphere. However, the transformation of CO2 and H2 into hydrocarbons has always been a great challenge while ensuring both the activity and selectivity over abundant-element-based nanocatalysts. In this work, we designed a Schottky heterojunction composed of electron-rich MoC nanoparticles embedded inside an optimized nitrogen-doped carbon support (MoC@NC) as the first example of noble-metal-free heterogeneous catalysts to boost the activity of and specific selectivity for CO2 hydrogenation to formic acid (FA) in liquid phase under mild conditions (2 MPa pressure and 70 °C). The MoC@NC catalyst with a high turnover frequency (TOF) of 8.20 molFA molMoC-1 h-1 at 140 °C and an excellent reusability are more favorable for real applications.

Electrochemical Reduction of N2 into NH3 by Donor-Acceptor Couples of Ni and Au Nanoparticles with a 67.8% Faradaic Efficiency.

The traditional NH3 production method (Haber-Bosch process) is currently complemented by electrochemical synthesis at ambient conditions, but the rather low selectivity (as indicated by the Faradaic efficiency) for the electrochemical reduction of molecular N2 into NH3 impedes the progress. Here, we present a powerful method to significantly boost the Faradaic efficiency of Au electrocatalysts to 67.8% for the nitrogen reduction reaction (NRR) by increasing their electron density through the construction of inorganic donor-acceptor couples of Ni and Au nanoparticles. The unique role of the electron-rich Au centers in facilitating the fixation and activation of N2 was also investigated via theoretical simulation methods and then confirmed by experimental results. The highly coupled Au and Ni nanoparticles supported on nitrogen-doped carbon are stable for reuse and long-term performance of the NRR, making the electrochemical process more sustainable for practical application.

Nitrogen-thermal modification of the bifunctional interfaces of transition metal/carbon dyads for the reversible hydrogenation and dehydrogenation of heteroarenes.

A nitrogen-thermal approach via the reaction between transition metal species and N dopants affords us the ability to optimize the tradeoff between the number of exposed transition metal/carbon (exemplified by cobalt in this work) boundaries and the most pronounced interfacial rectifying contact to achieve the highly efficient and selective hydrogenation and dehydrogenation of N-heterocycle compounds in a reversible manner.

Boosting selective nitrogen reduction to ammonia on electron-deficient copper nanoparticles.

Production of ammonia is currently realized by the Haber-Bosch process, while electrochemical N2 fixation under ambient conditions is recognized as a promising green substitution in the near future. A lack of efficient electrocatalysts remains the primary hurdle for the initiation of potential electrocatalytic synthesis of ammonia. For cheaper metals, such as copper, limited progress has been made to date. In this work, we boost the N2 reduction reaction catalytic activity of Cu nanoparticles, which originally exhibited negligible N2 reduction reaction activity, via a local electron depletion effect. The electron-deficient Cu nanoparticles are brought in a Schottky rectifying contact with a polyimide support which retards the hydrogen evolution reaction process in basic electrolytes and facilitates the electrochemical N2 reduction reaction process under ambient aqueous conditions. This strategy of inducing electron deficiency provides new insight into the rational design of inexpensive N2 reduction reaction catalysts with high selectivity and activity.

A COOH-terminated nitrogen-doped carbon aerogel as a bulk electrode for completely selective two-electron oxygen reduction to H2O2.

A COOH-terminated nitrogen-doped carbon aerogel exhibited 100% selectivity to two-electron oxygen reduction, exceeding reported carbonaceous and noble metal catalysts. The optimal electrode with the synergistic effect of C-N/C-COOH resulted in a minimum ηO2/H2O2 and gave an evolution rate of 60 mg L-1 g-1 h-1 for H2O2 with satisfactory mechanical and electrochemical stability for practical applications.

[Influence of the Application of Activated Persulfate on Municipal Sludge Conditioning].

The water content of dewatered sewage sludge can decrease at about 80% by traditional sludge dewatering technologies. High water content has negative impacts on the sequent sludge disposal with a stricter standard. The sulfate free radical SO4(*-), generated by activated persulfate, is a powerful oxidant. This article found that it could improve sludge dewatering properties by using the Fe2+ activated sodium persulfate (SPS). The results showed that when using Fe2+ 25.88 mg x g(-1) (based on dry sludge solid) and S2 O8(2-) 80 mg x g(-1) (the mole ratio of Fe2+ to S2 O8(2-) was 1.1 : 1) for sludge conditioning, it could reduce the capillary suction time (CST) and specific resistance to filtration (RSF) of sludge, increased the protein and ploysaccharide as well as the COD concentration in the filtrate. The further research showed that this method could change the zeta potential of sludge, increased the sludge particle specific surface area, and made flocs become a loose layered structure from dense clusters, which was beneficial to improve the sludge dewaterability.